Skip to contentSkip to conversation

drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

PATCH In review Rodrigo Vivi 3 participants 7 messages Sep 11, 2017 – Sep 13, 2017

Subsystems (2)
lore
Share & tools
lore

Rodrigo Vivi

author maintainer
#0 lore raw

PATCH 1/1 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

DK had pointed out a comment there was hard to understand, so I tried to read back again and I couldn't understand that as well. So let me re-phrase that in a way that anyone can understand later, even myself.

Also fixed the comment block style.

Cc Dhinakaran Pandiyan <[email protected]>
---
 drivers/gpu/drm/i915/intel_psr.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_psr.c +17 -12
index fdd9e3d95efb..1c2875b74bc9 100644
@@ -234,7 +234,7 @@ static void vlv_psr_enable_source(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 
-	/* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
+	/* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
 	I915_WRITE(VLV_PSRCTL(crtc->pipe),
 		   VLV_EDP_PSR_MODE_SW_TIMER |
 		   VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
@@ -249,10 +249,11 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
 	struct drm_crtc *crtc = dig_port->base.base.crtc;
 	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
-	/* Let's do the transition from PSR_state 1 to PSR_state 2
-	 * that is PSR transition to active - static frame transmission.
-	 * Then Hardware is responsible for the transition to PSR_state 3
-	 * that is PSR active - no Remote Frame Buffer (RFB) update.
+	/*
+	 * Let's do the transition from PSR_state 1 (inactive) to
+	 * PSR_state 2 (active - static frame transmission).
+	 * Then Hardware is responsible for the transition to
+	 * PSR_state 3 (no Remote Frame Buffer (RFB) update).
 	 */
 	I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
 		   VLV_EDP_PSR_ACTIVE_ENTRY);
@@ -576,7 +577,7 @@ static void vlv_psr_disable(struct intel_dp *intel_dp,
 	uint32_t val;
 
 	if (dev_priv->psr.active) {
-		/* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
+		/* Put VLV PSR back to PSR_state 0 (disabled). */
 		if (intel_wait_for_register(dev_priv,
 					    VLV_PSRSTAT(crtc->pipe),
 					    VLV_EDP_PSR_IN_TRANS,
@@ -766,16 +767,20 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 	} else {
 		val = I915_READ(VLV_PSRCTL(pipe));
 
-		/* Here we do the transition from PSR_state 3 to PSR_state 5
-		 * directly once PSR State 4 that is active with single frame
-		 * update can be skipped. PSR_state 5 that is PSR exit then
-		 * Hardware is responsible to transition back to PSR_state 1
-		 * that is PSR inactive. Same state after vlv_psr_enable_source.
+		/*
+		 * Here we do the transition drirectly from
+		 * PSR_state 3 (no Remote Frame Buffer (RFB) update) to
+		 * PSR_state 5 (exit).
+		 * PSR State 4 (active with single frame update) can be skipped.
+		 * On PSR_state 5 (exit) Hardware is responsible to transition
+		 * back to PSR_state 1 (inactive).
+		 * Now we are at Same state after vlv_psr_enable_source.
 		 */
 		val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
 		I915_WRITE(VLV_PSRCTL(pipe), val);
 
-		/* Send AUX wake up - Spec says after transitioning to PSR
+		/*
+		 * Send AUX wake up - Spec says after transitioning to PSR
 		 * active we have to send AUX wake up by writing 01h in DPCD
 		 * 600h of sink device.
 		 * XXX: This might slow down the transition, but without this
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✓ Fi.CI.BAT: success for drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

== Series Details ==

== Series Details ==

Series: drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.
URL : https://patchwork.freedesktop.org/series/30161/
State : success

== Summary ==

Series 30161v1 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.
https://patchwork.freedesktop.org/api/1.0/series/30161/revisions/1/mbox/

Test kms_cursor_legacy:

        Subgroup basic-busy-flip-before-cursor-atomic:
                pass       -> FAIL       (fi-snb-2600) fdo#100215 +1
Test kms_flip:
        Subgroup basic-flip-vs-modeset:
                pass       -> SKIP       (fi-skl-x1585l) fdo#101781
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                incomplete -> PASS       (fi-cfl-s)

fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fdo#101781 https://bugs.freedesktop.org/show_bug.cgi?id=101781

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:437s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:452s
fi-blb-e6850     total:289  pass:224  dwarn:1   dfail:0   fail:0   skip:64  time:379s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:552s
fi-bwr-2160      total:289  pass:184  dwarn:0   dfail:0   fail:0   skip:105 time:269s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:511s
fi-byt-j1900     total:289  pass:254  dwarn:1   dfail:0   fail:0   skip:34  time:502s
fi-byt-n2820     total:289  pass:250  dwarn:1   dfail:0   fail:0   skip:38  time:498s
fi-cfl-s         total:289  pass:250  dwarn:4   dfail:0   fail:0   skip:35  time:452s
fi-elk-e7500     total:289  pass:230  dwarn:0   dfail:0   fail:0   skip:59  time:454s
fi-glk-2a        total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:597s
fi-hsw-4770      total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:432s
fi-hsw-4770r     total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:409s
fi-ilk-650       total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:440s
fi-ivb-3520m     total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:483s
fi-ivb-3770      total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:464s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:483s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:575s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:586s
fi-pnv-d510      total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:552s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:456s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:527s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:495s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:467s
fi-skl-x1585l    total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:472s
fi-snb-2520m     total:289  pass:251  dwarn:0   dfail:0   fail:0   skip:38  time:567s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:1   skip:39  time:422s

3528bc23083ec99bc025b9f812ff982c79c05250 drm-tip: 2017y-09m-11d-22h-26m-59s UTC integration manifest 07f045f5c290 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5648/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

✓ Fi.CI.IGT: success for drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.
URL : https://patchwork.freedesktop.org/series/30161/
State : success

== Summary ==

Test gem_eio:

        Subgroup in-flight:
                fail       -> PASS       (shard-hsw) fdo#102616
Test kms_cursor_legacy:
        Subgroup flip-vs-cursor-toggle:
                fail       -> PASS       (shard-hsw)
Test perf:
        Subgroup blocking:
                fail       -> PASS       (shard-hsw) fdo#102252

fdo#102616 https://bugs.freedesktop.org/show_bug.cgi?id=102616
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252

shard-hsw total:2301 pass:1237 dwarn:0 dfail:0 fail:12 skip:1052 time:9422s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5648/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/1
#3 lore raw
In reply to Rodrigo Vivi
Quoted 5 lines · Rodrigo Vivi

DK had pointed out a comment there was hard to understand, so I tried to read back again and I couldn't understand that as well. So let me re-phrase that in a way that anyone can understand later, even myself.

This reads much better, thanks for the patch. I've got just one nit below.

Quoted 22 lines

Also fixed the comment block style.

Cc Dhinakaran Pandiyan <[email protected]>
---
 drivers/gpu/drm/i915/intel_psr.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_psr.c +1 -1
index fdd9e3d95efb..1c2875b74bc9 100644
@@ -234,7 +234,7 @@ static void vlv_psr_enable_source(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 
-	/* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
+	/* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
 	I915_WRITE(VLV_PSRCTL(crtc->pipe),
 		   VLV_EDP_PSR_MODE_SW_TIMER |
 		   VLV_EDP_PSR_SRC_TRANSMITTER_STATE |

drivers/gpu/drm/i915/intel_psr.c static void vlv_psr_activate(struct intel_dp *intel_dp) · line 254

Quoted 10 lines
drivers/gpu/drm/i915/intel_psr.c +3 -4
@@ -249,10 +249,11 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
 	struct drm_crtc *crtc = dig_port->base.base.crtc;
 	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
-	/* Let's do the transition from PSR_state 1 to PSR_state 2
-	 * that is PSR transition to active - static frame transmission.
-	 * Then Hardware is responsible for the transition to PSR_state 3
-	 * that is PSR active - no Remote Frame Buffer (RFB) update.
+	/*
+	 * Let's do the transition from PSR_state 1 (inactive) to
+	 * PSR_state 2 (active - static frame transmission).

nit: The spec calls the state 2 itself as "transition to active - static frame transmission" and state 3 as active.

Quoted 31 lines
drivers/gpu/drm/i915/intel_psr.c +11 -6
+	 * Then Hardware is responsible for the transition to
+	 * PSR_state 3 (no Remote Frame Buffer (RFB) update).
 	 */
 	I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
 		   VLV_EDP_PSR_ACTIVE_ENTRY);
@@ -576,7 +577,7 @@ static void vlv_psr_disable(struct intel_dp *intel_dp,
 	uint32_t val;
 
 	if (dev_priv->psr.active) {
-		/* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
+		/* Put VLV PSR back to PSR_state 0 (disabled). */
 		if (intel_wait_for_register(dev_priv,
 					    VLV_PSRSTAT(crtc->pipe),
 					    VLV_EDP_PSR_IN_TRANS,
@@ -766,16 +767,20 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 	} else {
 		val = I915_READ(VLV_PSRCTL(pipe));
 
-		/* Here we do the transition from PSR_state 3 to PSR_state 5
-		 * directly once PSR State 4 that is active with single frame
-		 * update can be skipped. PSR_state 5 that is PSR exit then
-		 * Hardware is responsible to transition back to PSR_state 1
-		 * that is PSR inactive. Same state after vlv_psr_enable_source.
+		/*
+		 * Here we do the transition drirectly from
+		 * PSR_state 3 (no Remote Frame Buffer (RFB) update) to
+		 * PSR_state 5 (exit).
+		 * PSR State 4 (active with single frame update) can be skipped.
+		 * On PSR_state 5 (exit) Hardware is responsible to transition
+		 * back to PSR_state 1 (inactive).
+		 * Now we are at Same state after vlv_psr_enable_source.

drivers/gpu/drm/i915/intel_psr.c static void intel_psr_exit(struct drm_i915_private *dev_priv) · line 786

Quoted 10 lines
drivers/gpu/drm/i915/intel_psr.c +2 -1
 		 */
 		val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
 		I915_WRITE(VLV_PSRCTL(pipe), val);
 
-		/* Send AUX wake up - Spec says after transitioning to PSR
+		/*
+		 * Send AUX wake up - Spec says after transitioning to PSR
 		 * active we have to send AUX wake up by writing 01h in DPCD
 		 * 600h of sink device.
 		 * XXX: This might slow down the transition, but without this

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#4 lore raw

PATCH 1/1 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

DK had pointed out a comment there was hard to understand, so I tried to read back again and I couldn't understand that as well. So let me re-phrase that in a way that anyone can understand later, even myself.

Also fixed the comment block style.

v2: Accept DK's suggestion on PSR_state 2 and PSR_state 3 named
as spec.

---
 drivers/gpu/drm/i915/intel_psr.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_psr.c +17 -12
index fdd9e3d95efb..55b4002bbe53 100644
@@ -234,7 +234,7 @@ static void vlv_psr_enable_source(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 
-	/* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
+	/* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
 	I915_WRITE(VLV_PSRCTL(crtc->pipe),
 		   VLV_EDP_PSR_MODE_SW_TIMER |
 		   VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
@@ -249,10 +249,11 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
 	struct drm_crtc *crtc = dig_port->base.base.crtc;
 	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
-	/* Let's do the transition from PSR_state 1 to PSR_state 2
-	 * that is PSR transition to active - static frame transmission.
-	 * Then Hardware is responsible for the transition to PSR_state 3
-	 * that is PSR active - no Remote Frame Buffer (RFB) update.
+	/*
+	 * Let's do the transition from PSR_state 1 (inactive) to
+	 * PSR_state 2 (transition to active - static frame transmission).
+	 * Then Hardware is responsible for the transition to
+	 * PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
 	 */
 	I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
 		   VLV_EDP_PSR_ACTIVE_ENTRY);
@@ -576,7 +577,7 @@ static void vlv_psr_disable(struct intel_dp *intel_dp,
 	uint32_t val;
 
 	if (dev_priv->psr.active) {
-		/* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
+		/* Put VLV PSR back to PSR_state 0 (disabled). */
 		if (intel_wait_for_register(dev_priv,
 					    VLV_PSRSTAT(crtc->pipe),
 					    VLV_EDP_PSR_IN_TRANS,
@@ -766,16 +767,20 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 	} else {
 		val = I915_READ(VLV_PSRCTL(pipe));
 
-		/* Here we do the transition from PSR_state 3 to PSR_state 5
-		 * directly once PSR State 4 that is active with single frame
-		 * update can be skipped. PSR_state 5 that is PSR exit then
-		 * Hardware is responsible to transition back to PSR_state 1
-		 * that is PSR inactive. Same state after vlv_psr_enable_source.
+		/*
+		 * Here we do the transition drirectly from
+		 * PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
+		 * PSR_state 5 (exit).
+		 * PSR State 4 (active with single frame update) can be skipped.
+		 * On PSR_state 5 (exit) Hardware is responsible to transition
+		 * back to PSR_state 1 (inactive).
+		 * Now we are at Same state after vlv_psr_enable_source.
 		 */
 		val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
 		I915_WRITE(VLV_PSRCTL(pipe), val);
 
-		/* Send AUX wake up - Spec says after transitioning to PSR
+		/*
+		 * Send AUX wake up - Spec says after transitioning to PSR
 		 * active we have to send AUX wake up by writing 01h in DPCD
 		 * 600h of sink device.
 		 * XXX: This might slow down the transition, but without this
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

✓ Fi.CI.BAT: success for drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine. (rev2)

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine. (rev2)
URL : https://patchwork.freedesktop.org/series/30161/
State : success

== Summary ==

Series 30161v2 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.
https://patchwork.freedesktop.org/api/1.0/series/30161/revisions/2/mbox/

Test kms_cursor_legacy:

        Subgroup basic-busy-flip-before-cursor-legacy:
                fail       -> PASS       (fi-snb-2600) fdo#100215

fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:445s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:452s
fi-blb-e6850     total:289  pass:224  dwarn:1   dfail:0   fail:0   skip:64  time:375s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:523s
fi-bwr-2160      total:289  pass:184  dwarn:0   dfail:0   fail:0   skip:105 time:268s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:506s
fi-byt-j1900     total:289  pass:254  dwarn:1   dfail:0   fail:0   skip:34  time:500s
fi-byt-n2820     total:289  pass:250  dwarn:1   dfail:0   fail:0   skip:38  time:498s
fi-cfl-s         total:289  pass:250  dwarn:4   dfail:0   fail:0   skip:35  time:458s
fi-elk-e7500     total:289  pass:230  dwarn:0   dfail:0   fail:0   skip:59  time:453s
fi-glk-2a        total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:591s
fi-hsw-4770      total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:424s
fi-hsw-4770r     total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:410s
fi-ilk-650       total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:435s
fi-ivb-3520m     total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:486s
fi-ivb-3770      total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:462s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:496s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:577s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:586s
fi-pnv-d510      total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:553s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:456s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:534s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:496s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:464s
fi-skl-x1585l    total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:473s
fi-snb-2520m     total:289  pass:251  dwarn:0   dfail:0   fail:0   skip:38  time:566s
fi-snb-2600      total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:429s

c422dc1ff5f3ab3d3bea7556b542d415a9bd93eb drm-tip: 2017y-09m-12d-17h-33m-37s UTC integration manifest f0c820a15d54 drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5667/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.IGT: success for drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine. (rev2)

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: drm/i915: Refresh VLV/CHV PSR comments on HW PSR_state machine. (rev2)
URL : https://patchwork.freedesktop.org/series/30161/
State : success

== Summary ==

Test kms_chv_cursor_fail:

        Subgroup pipe-B-128x128-right-edge:
                skip       -> PASS       (shard-hsw)
Test kms_fbc_crc:
        Subgroup mmap_cpu:
                skip       -> PASS       (shard-hsw)
Test kms_cursor_legacy:
        Subgroup cursor-vs-flip-legacy:
                skip       -> PASS       (shard-hsw)
Test kms_universal_plane:
        Subgroup universal-plane-pipe-A-sanity:
                skip       -> PASS       (shard-hsw)
        Subgroup universal-plane-pipe-C-sanity:
                skip       -> PASS       (shard-hsw)
Test pm_rpm:
        Subgroup modeset-non-lpsp-stress:
                skip       -> PASS       (shard-hsw)
Test kms_atomic_transition:
        Subgroup plane-all-modeset-transition-fencing:
                skip       -> PASS       (shard-hsw)
Test kms_cursor_crc:
        Subgroup cursor-128x42-sliding:
                skip       -> PASS       (shard-hsw)
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-primscrn-pri-shrfb-draw-blt:
                skip       -> PASS       (shard-hsw)
Test prime_self_import:
        Subgroup reimport-vs-gem_close-race:
                fail       -> PASS       (shard-hsw)
Test perf:
        Subgroup polling:
                pass       -> FAIL       (shard-hsw) fdo#102252 +1
Test kms_setmode:
        Subgroup basic:
                fail       -> PASS       (shard-hsw) fdo#99912
Test gem_eio:
        Subgroup in-flight:
                fail       -> PASS       (shard-hsw) fdo#102616

fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102616 https://bugs.freedesktop.org/show_bug.cgi?id=102616

shard-hsw total:2419 pass:1324 dwarn:1 dfail:0 fail:13 skip:1081 time:9657s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5667/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx