Patch "scsi: megaraid_sas: set minimum value of resetwaittime to be 1 secs" has been added to the 4.13-stable tree
Subsystems (3)
This is a note to let you know that I've just added the patch titled
scsi: megaraid_sas: set minimum value of resetwaittime to be 1 secs
to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-megaraid_sas-set-minimum-value-of-resetwaittime-to-be-1-secs.patch
and it can be found in the queue-4.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
e636a7a430f41efb0ff2727960ce61ef9f8f6769Mon Sep 17 00:00:00 2001
From: Shivasharan S <[email protected]>
Date: Wed, 23 Aug 2017 04:46:56 -0700
Subject: scsi: megaraid_sas: set minimum value of resetwaittime to be 1 secs
From: Shivasharan S <[email protected]>
commit e636a7a430f41efb0ff2727960ce61ef9f8f6769 upstream.
Setting resetwaittime to 0 during a FW fault will result in driver not calling the OCR.
--- drivers/scsi/megaraid/megaraid_sas_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/megaraid/megaraid_sas_base.c +2 -1
@@ -5478,7 +5478,8 @@ static int megasas_init_fw(struct megasa instance->throttlequeuedepth =MEGASAS_THROTTLE_QUEUE_DEPTH ; -if (resetwaittime >MEGASAS_RESET_WAIT_TIME ) +if ((resetwaittime <1 ) || + (resetwaittime >MEGASAS_RESET_WAIT_TIME )) resetwaittime =MEGASAS_RESET_WAIT_TIME ;if ((scmd_timeout <10 ) || (scmd_timeout >MEGASAS_DEFAULT_CMD_TIMEOUT ))
Patches currently in stable-queue which might be from [email protected] are
queue-4.13/scsi-megaraid_sas-check-valid-aen-class-range-to-avoid-kernel-panic.patch queue-4.13/scsi-megaraid_sas-return-pended-ioctls-with-cmd_status-mfi_stat_wrong_state-in-case-adapter-is-dead.patch queue-4.13/scsi-megaraid_sas-set-minimum-value-of-resetwaittime-to-be-1-secs.patch queue-4.13/scsi-megaraid_sas-mismatch-of-allocated-mfi-frame-size-and-length-exposed-in-mfi-mpt-pass-through-command.patch