configs/mx6udoo: Bump kernel and U-Boot versions
PATCH 1/1 configs/mx6udoo: Bump kernel and U-Boot versions
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image and use the standard scripts instead.
Signed-off-by Fabio Estevam <[email protected]>
--- board/udoo/mx6qdl/genimage.cfg | 48 ----------------------------------------- board/udoo/mx6qdl/post-image.sh | 14 ------------ configs/mx6udoo_defconfig | 10 ++++----- 3 files changed, 5 insertions(+), 67 deletions(-) delete mode 100644 board/udoo/mx6qdl/genimage.cfg delete mode 100755 board/udoo/mx6qdl/post-image.sh
board/udoo/mx6qdl/genimage.cfg deleted +0 -48
@@ -1,48 +0,0 @@ -# Minimal microSD card image for Udoo MX6Q/DL boards -# -# We mimic the .sdcard Freescale's image format for i.MX6: -# * the microSD card must have 1 kB free space at the beginning, -# * U-Boot is dumped as is, -# * a FAT partition at offset 16 MB is containing zImage and dtbs, -# * a single root filesystem partition is required (Ext4 in this case). -# - -image boot.vfat { - vfat { - files = { - "imx6q-udoo.dtb", - "imx6dl-udoo.dtb", - "zImage" - } - } - size = 16M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1K - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 16M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - } -}
board/udoo/mx6qdl/post-image.sh deleted +0 -14
@@ -1,14 +0,0 @@ -#!/usr/bin/env bash - -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" - -rm -rf "${GENIMAGE_TMP}" - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}"
configs/mx6udoo_defconfig +5 -5
@@ -3,22 +3,22 @@ BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_VFPV3=y -# Linux headers same as kernel, a 4.8 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y +# Linux headers same as kernel, a 4.13 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/mx6qdl/post-image.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="udoo" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09" BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="SPL" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.11" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.5" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/udoo/mx6qdl/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y
Signature · 1 line
2.7.4
Thomas Petazzoni
AppliedPATCH 1/1 configs/mx6udoo: Bump kernel and U-Boot versions
Hello,
Quoted 5 lines · Fabio Estevam
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image and use the standard scripts instead.
Quoted 8 lines
Signed-off-by Fabio Estevam <[email protected]>--- board/udoo/mx6qdl/genimage.cfg | 48 ----------------------------------------- board/udoo/mx6qdl/post-image.sh | 14 ------------ configs/mx6udoo_defconfig | 10 ++++----- 3 files changed, 5 insertions(+), 67 deletions(-) delete mode 100644 board/udoo/mx6qdl/genimage.cfg delete mode 100755 board/udoo/mx6qdl/post-image.sh
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com