Skip to contentSkip to conversation

display: panel: Add Mitsubishi aa070mc01 display support (800x480)

PATCH Applied Lukasz Majewski 3 participants 7 messages Oct 20, 2017 – Nov 17, 2017

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 display: panel: Add Mitsubishi aa070mc01 display support (800x480)

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35 ++++++++++++++++++++++
 2 files changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt new file +7 -0
new file mode 100644
index 0000000..4f5094f
@@ -0,0 +1,7 @@
+Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "mitsubishi,aa070mc01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
drivers/gpu/drm/panel/panel-simple.c +35 -0
index 07188dc..72a20fc 100644
@@ -1350,6 +1350,38 @@ static const struct panel_desc lg_lp129qe = {
 	},
 };
 
+static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
+	.clock = 30400,
+	.hdisplay = 800,
+	.hsync_start = 800 + 0,
+	.hsync_end = 800 + 1,
+	.htotal = 800 + 0 + 1 + 160,
+	.vdisplay = 480,
+	.vsync_start = 480 + 0,
+	.vsync_end = 480 + 48 + 1,
+	.vtotal = 480 + 48 + 1 + 0,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc mitsubishi_aa070mc01 = {
+	.modes = &mitsubishi_aa070mc01_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+
+	.delay = {
+		.enable = 200,
+		.unprepare = 200,
+		.disable = 400,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
 static const struct display_timing nec_nl12880bc20_05_timing = {
 	.pixelclock = { 67000000, 71000000, 75000000 },
 	.hactive = { 1280, 1280, 1280 },
@@ -2080,6 +2112,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
+		.compatible = "mitsubishi,aa070mc01-ca1",
+		.data = &mitsubishi_aa070mc01,
+	}, {
 		.compatible = "nec,nl12880bc20-05",
 		.data = &nec_nl12880bc20_05,
 	}, {
Signature · 6 lines
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

PATCH v3 1/1 display: panel: Add Mitsubishi aa070mc01 display support (800x480)

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Changes for v3:
- Fix typo in display name (in property description)

---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35 ++++++++++++++++++++++
 2 files changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt new file +7 -0
new file mode 100644
index 0000000..4f5094f
@@ -0,0 +1,7 @@
+Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "mitsubishi,aa070mc01-ca1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
drivers/gpu/drm/panel/panel-simple.c +35 -0
index 07188dc..72a20fc 100644
@@ -1350,6 +1350,38 @@ static const struct panel_desc lg_lp129qe = {
 	},
 };
 
+static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
+	.clock = 30400,
+	.hdisplay = 800,
+	.hsync_start = 800 + 0,
+	.hsync_end = 800 + 1,
+	.htotal = 800 + 0 + 1 + 160,
+	.vdisplay = 480,
+	.vsync_start = 480 + 0,
+	.vsync_end = 480 + 48 + 1,
+	.vtotal = 480 + 48 + 1 + 0,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc mitsubishi_aa070mc01 = {
+	.modes = &mitsubishi_aa070mc01_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+
+	.delay = {
+		.enable = 200,
+		.unprepare = 200,
+		.disable = 400,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
 static const struct display_timing nec_nl12880bc20_05_timing = {
 	.pixelclock = { 67000000, 71000000, 75000000 },
 	.hactive = { 1280, 1280, 1280 },
@@ -2080,6 +2112,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
+		.compatible = "mitsubishi,aa070mc01-ca1",
+		.data = &mitsubishi_aa070mc01,
+	}, {
 		.compatible = "nec,nl12880bc20-05",
 		.data = &nec_nl12880bc20_05,
 	}, {
Signature · 6 lines
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw

Dear All,

Quoted 2 lines

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

Gentle ping...

Quoted 75 lines

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Changes for v3:
- Fix typo in display name (in property description)

---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35
++++++++++++++++++++++ 2 files changed, 42 insertions(+)
 create mode 100644

Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt new file mode 100644 index 0000000..4f5094f --- /dev/null
+++
b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt new file +5 -0
@@ -0,0 +1,7 @@ +Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "mitsubishi,aa070mc01-ca1"
+
+This binding is compatible with the simple-panel binding, which is

specified +in simple-panel.txt in this directory.

(quoted diff) +0 -0

b/drivers/gpu/drm/panel/panel-simple.c index 07188dc..72a20fc 100644

drivers/gpu/drm/panel/panel-simple.c +32 -0
@@ -1350,6 +1350,38 @@ static const struct panel_desc lg_lp129qe = {
 	},
 };
 
+static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
+	.clock = 30400,
+	.hdisplay = 800,
+	.hsync_start = 800 + 0,
+	.hsync_end = 800 + 1,
+	.htotal = 800 + 0 + 1 + 160,
+	.vdisplay = 480,
+	.vsync_start = 480 + 0,
+	.vsync_end = 480 + 48 + 1,
+	.vtotal = 480 + 48 + 1 + 0,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc mitsubishi_aa070mc01 = {
+	.modes = &mitsubishi_aa070mc01_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+
+	.delay = {
+		.enable = 200,
+		.unprepare = 200,
+		.disable = 400,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
 static const struct display_timing nec_nl12880bc20_05_timing = {
 	.pixelclock = { 67000000, 71000000, 75000000 },
 	.hactive = { 1280, 1280, 1280 },

drivers/gpu/drm/panel/panel-simple.c static const struct of_device_id · line 2120

Quoted 9 lines
drivers/gpu/drm/panel/panel-simple.c +3 -0
@@ -2080,6 +2112,9 @@ static const struct of_device_id
 platform_of_match[] = { .compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
+		.compatible = "mitsubishi,aa070mc01-ca1",
+		.data = &mitsubishi_aa070mc01,
+	}, {
 		.compatible = "nec,nl12880bc20-05",
 		.data = &nec_nl12880bc20_05,
 	}, {

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected]

Acked-by on v3 1/1
#3 lore raw
In reply to Lukasz Majewski
Quoted 10 lines · Lukasz Majewski

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Quoted 8 lines

Changes for v3:
- Fix typo in display name (in property description)

---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35 ++++++++++++++++++++++
 2 files changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#4 lore raw

Dear All,

Quoted 15 lines
Quoted 13 lines · Lukasz Majewski

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Changes for v3:
- Fix typo in display name (in property description)

Quoted 8 lines
Quoted 6 lines
---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35
++++++++++++++++++++++ 2 files changed, 42 insertions(+)
 create mode 100644

Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

Is there a chance that this patch will find its way to v4.15-rc1 ?

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected]

#5 lore raw
In reply to Lukasz Majewski
Quoted 9 lines · Lukasz Majewski

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Quoted 5 lines
---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35 ++++++++++++++++++++++
 2 files changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

Applied to drm-misc-next, thanks.

Thierry

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#6 lore raw

Hi Thierry,

Quoted 17 lines · Lukasz Majewski
Quoted 9 lines

This commit adds support for Mitsubishi aa070mc01 TFT panel working with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

---
Changes for v2:
- Place the code sorted alphabetically
- Add missing ./Documentation/devicetree/binding/display properties description

Quoted 6 lines
---
 .../display/panel/mitsubishi,aa070mc01.txt         |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 35
++++++++++++++++++++++ 2 files changed, 42 insertions(+)
 create mode 100644

Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

Quoted 3 lines

Applied to drm-misc-next, thanks.

Thierry

Thanks :-)

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected]