Skip to contentSkip to conversation

Patch "media: s5p-cec: add NACK detection support" has been added to the 4.13-stable tree

PATCH [email protected] 1 participant 1 message Oct 24, 2017

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

media: s5p-cec: add NACK detection support

to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
media-s5p-cec-add-nack-detection-support.patch
and it can be found in the queue-4.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From e949f61461ab83b094cad564c89a8d2b078b4508 Mon Sep 17 00:00:00 2001

From: Hans Verkuil <[email protected]>
Date: Thu, 31 Aug 2017 12:56:10 -0400
Subject: media: s5p-cec: add NACK detection support

From: Hans Verkuil <[email protected]>

commit e949f61461ab83b094cad564c89a8d2b078b4508 upstream.

The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition.

Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where bit 0 indicates if the transmit was nacked or not.

Use this to return the correct CEC_TX_STATUS_NACK status to userspace.

This was the only driver that couldn't tell a NACK from another error, and that was very unusual. And a potential problem for applications as well.

Tested with my Odroid-U3.

---
 drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c |    3 ++-
 drivers/media/platform/s5p-cec/s5p_cec.c             |   11 ++++++++++-
 drivers/media/platform/s5p-cec/s5p_cec.h             |    2 ++
 3 files changed, 14 insertions(+), 2 deletions(-)
drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c +2 -1
@@ -172,7 +172,8 @@ u32 s5p_cec_get_status(struct s5p_cec_de
 {
 	u32 status = 0;
 
-	status = readb(cec->reg + S5P_CEC_STATUS_0);
+	status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf;
+	status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4;
 	status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
 	status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
 	status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;
drivers/media/platform/s5p-cec/s5p_cec.c +10 -1
@@ -92,7 +92,10 @@ static irqreturn_t s5p_cec_irq_handler(i
 	dev_dbg(cec->dev, "irq received\n");
 
 	if (status & CEC_STATUS_TX_DONE) {
-		if (status & CEC_STATUS_TX_ERROR) {
+		if (status & CEC_STATUS_TX_NACK) {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n");
+			cec->tx = STATE_NACK;
+		} else if (status & CEC_STATUS_TX_ERROR) {
 			dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
 			cec->tx = STATE_ERROR;
 		} else {
@@ -135,6 +138,12 @@ static irqreturn_t s5p_cec_irq_handler_t
 		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
 		cec->tx = STATE_IDLE;
 		break;
+	case STATE_NACK:
+		cec_transmit_done(cec->adap,
+			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK,
+			0, 1, 0, 0);
+		cec->tx = STATE_IDLE;
+		break;
 	case STATE_ERROR:
 		cec_transmit_done(cec->adap,
 			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR,
drivers/media/platform/s5p-cec/s5p_cec.h +2 -0
@@ -35,6 +35,7 @@
 #define CEC_STATUS_TX_TRANSFERRING	(1 << 1)
 #define CEC_STATUS_TX_DONE		(1 << 2)
 #define CEC_STATUS_TX_ERROR		(1 << 3)
+#define CEC_STATUS_TX_NACK		(1 << 4)
 #define CEC_STATUS_TX_BYTES		(0xFF << 8)
 #define CEC_STATUS_RX_RUNNING		(1 << 16)
 #define CEC_STATUS_RX_RECEIVING		(1 << 17)
@@ -55,6 +56,7 @@ enum cec_state {
 	STATE_IDLE,
 	STATE_BUSY,
 	STATE_DONE,
+	STATE_NACK,
 	STATE_ERROR
 };
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.13/media-s5p-cec-add-nack-detection-support.patch