Skip to contentSkip to conversation

drm/i915: Improve DP downstream HPD handling

PATCH Superseded Ville Syrjala 4 participants 10 messages Oct 26, 2017 – Oct 27, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Improve DP downstream HPD handling

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

---
 drivers/gpu/drm/i915/intel_dp.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +17 -1
index aa75f55eeb61..6ecc1b532f15 100644
@@ -2673,6 +2673,21 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	}
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2 should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 static void intel_disable_dp(struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
@@ -2686,7 +2701,8 @@ static void intel_disable_dp(struct intel_encoder *encoder,
 	 * ensure that we have vdd while we switch off the panel. */
 	intel_edp_panel_vdd_on(intel_dp);
 	intel_edp_backlight_off(old_conn_state);
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	if (!downstream_hpd_needs_d0(intel_dp))
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 	intel_edp_panel_off(intel_dp);
 }
 
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✗ Fi.CI.BAT: failure for drm/i915: Improve DP downstream HPD handling

== Series Details ==

== Series Details ==

Series: drm/i915: Improve DP downstream HPD handling
URL : https://patchwork.freedesktop.org/series/32714/
State : failure

== Summary ==

Series 32714v1 drm/i915: Improve DP downstream HPD handling
https://patchwork.freedesktop.org/api/1.0/series/32714/revisions/1/mbox/

Test kms_busy:

        Subgroup basic-flip-a:
                pass       -> INCOMPLETE (fi-glk-dsi)
fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:439s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:448s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:372s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:520s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:264s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:496s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:490s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:489s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:478s
fi-cfl-s         total:289  pass:253  dwarn:4   dfail:0   fail:0   skip:32  time:554s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:601s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:416s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:571s
fi-glk-dsi       total:206  pass:183  dwarn:0   dfail:0   fail:0   skip:22 
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:431s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:434s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:440s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:504s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:456s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:487s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:573s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:477s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:580s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:542s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:453s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:594s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:649s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:521s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:507s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:460s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:561s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:420s

fi-gdg-551 failed to connect after reboot

faa3689f622af5d0e2d6bf106c84ab1d5ec49959 drm-tip: 2017y-10m-26d-18h-35m-28s UTC integration manifest 69697c0d3e79 drm/i915: Improve DP downstream HPD handling

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6213/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw
In reply to Ville Syrjala

drivers/gpu/drm/i915/intel_dp.c static void intel_disable_dp(struct intel_encoder *encoder,

Quoted 44 lines · Ville Syrjala

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

---
 drivers/gpu/drm/i915/intel_dp.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +15 -0
index aa75f55eeb61..6ecc1b532f15 100644
@@ -2673,6 +2673,21 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	}
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2 should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 static void intel_disable_dp(struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
@@ -2686,7 +2701,8 @@ static void intel_disable_dp(struct intel_encoder *encoder,

It's not clear why the DDI counterpart is missing.

drivers/gpu/drm/i915/intel_dp.c static void intel_disable_dp(struct intel_encoder *encoder, · line 2708

Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c +2 -1
 	 * ensure that we have vdd while we switch off the panel. */
 	intel_edp_panel_vdd_on(intel_dp);
 	intel_edp_backlight_off(old_conn_state);
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	if (!downstream_hpd_needs_d0(intel_dp))
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 	intel_edp_panel_off(intel_dp);
 }
 

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
Quoted 40 lines · Dhinakaran
Quoted 38 lines · Ville Syrjala

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

---
 drivers/gpu/drm/i915/intel_dp.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +13 -0
index aa75f55eeb61..6ecc1b532f15 100644
@@ -2673,6 +2673,21 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	}
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2 should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
Quoted 8 lines

drivers/gpu/drm/i915/intel_dp.c static void intel_disable_dp(struct intel_encoder *encoder,

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +2 -0
+}
+
 static void intel_disable_dp(struct intel_encoder *encoder,
 			     const struct intel_crtc_state *old_crtc_state,
 			     const struct drm_connector_state *old_conn_state)
@@ -2686,7 +2701,8 @@ static void intel_disable_dp(struct intel_encoder *encoder,

It's not clear why the DDI counterpart is missing.

Because I forgot we have the same code in two places ;) v2 coming up...

Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +2 -1
 	 * ensure that we have vdd while we switch off the panel. */
 	intel_edp_panel_vdd_on(intel_dp);
 	intel_edp_backlight_off(old_conn_state);
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	if (!downstream_hpd_needs_d0(intel_dp))
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 	intel_edp_panel_off(intel_dp);
 }
 
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v2 1/1 drm/i915: Improve DP downstream HPD handling

In reply to Ville Syrjala

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)

Cc: Dhinakaran Pandiyan <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

---
 drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +18 -0
index aa75f55eeb61..59169a4dc9d3 100644
@@ -2505,6 +2505,21 @@ static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
 	udelay(200);
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
@@ -2515,6 +2530,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		return;
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		if (downstream_hpd_needs_d0(intel_dp))
+			return;
+
 		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
 					 DP_SET_POWER_D3);
 	} else {
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer Reviewed-by on v2 1/1
#5 lore raw
Quoted 10 lines · Ville Syrjala

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)

Quoted 7 lines

Cc: Dhinakaran Pandiyan <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

Quoted 40 lines
---
 drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +18 -0
index aa75f55eeb61..59169a4dc9d3 100644
@@ -2505,6 +2505,21 @@ static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
 	udelay(200);
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
@@ -2515,6 +2530,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		return;
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		if (downstream_hpd_needs_d0(intel_dp))
+			return;
+
 		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
 					 DP_SET_POWER_D3);
 	} else {
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 19 lines · Jani Nikula
Quoted 10 lines · Ville Syrjala

From: Ville Syrjälä <[email protected]>

DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port.

v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)

Quoted 7 lines

Cc: Dhinakaran Pandiyan <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Pablo <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114

Quoted 1 line

Thanks for the review. Patch pushed to dinq.

Quoted 45 lines
Quoted 42 lines

---
 drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +18 -0
index aa75f55eeb61..59169a4dc9d3 100644
@@ -2505,6 +2505,21 @@ static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
 	udelay(200);
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
@@ -2515,6 +2530,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		return;
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		if (downstream_hpd_needs_d0(intel_dp))
+			return;
+
 		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
 					 DP_SET_POWER_D3);
 	} else {
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

✗ Fi.CI.BAT: warning for drm/i915: Improve DP downstream HPD handling (rev2)

In reply to Ville Syrjala
== Series Details ==

== Series Details ==

Series: drm/i915: Improve DP downstream HPD handling (rev2)
URL : https://patchwork.freedesktop.org/series/32714/
State : warning

== Summary ==

Series 32714v2 drm/i915: Improve DP downstream HPD handling
https://patchwork.freedesktop.org/api/1.0/series/32714/revisions/2/mbox/

Test gem_exec_reloc:

        Subgroup basic-cpu-gtt-active:
                pass       -> FAIL       (fi-gdg-551) fdo#102582 +2
Test gem_exec_suspend:
        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-cfl-s) fdo#103186
Test gem_ringfill:
        Subgroup basic-default-hang:
                dmesg-warn -> PASS       (fi-pnv-d510) fdo#101600
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                pass       -> DMESG-WARN (fi-byt-n2820) fdo#101705
Test prime_vgem:
        Subgroup basic-fence-mmap:
                pass       -> DMESG-WARN (fi-bsw-n3050)

fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582
fdo#103186 https://bugs.freedesktop.org/show_bug.cgi?id=103186
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:441s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:454s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:370s
fi-bsw-n3050     total:289  pass:242  dwarn:1   dfail:0   fail:0   skip:46  time:530s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:262s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:499s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:492s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:494s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:478s
fi-cfl-s         total:289  pass:254  dwarn:3   dfail:0   fail:0   skip:32  time:559s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:608s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:422s
fi-gdg-551       total:289  pass:175  dwarn:1   dfail:0   fail:4   skip:109 time:251s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:579s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:493s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:431s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:430s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:430s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:492s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:467s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:494s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:574s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:475s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:585s
fi-pnv-d510      total:289  pass:223  dwarn:0   dfail:0   fail:0   skip:66  time:546s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:451s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:593s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:648s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:521s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:504s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:456s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:560s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:419s

1db1a27d38d789ce2886db512828ae306c998bc3 drm-tip: 2017y-10m-27d-07h-23m-09s UTC integration manifest 7793aaa4f221 drm/i915: Improve DP downstream HPD handling

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6225/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✓ Fi.CI.BAT: success for drm/i915: Improve DP downstream HPD handling (rev2)

In reply to Ville Syrjala
== Series Details ==

== Series Details ==

Series: drm/i915: Improve DP downstream HPD handling (rev2)
URL : https://patchwork.freedesktop.org/series/32714/
State : success

== Summary ==

Series 32714v2 drm/i915: Improve DP downstream HPD handling
https://patchwork.freedesktop.org/api/1.0/series/32714/revisions/2/mbox/

Test chamelium:

        Subgroup dp-crc-fast:
                pass       -> FAIL       (fi-kbl-7500u) fdo#102514
Test gem_exec_reloc:
        Subgroup basic-cpu-active:
                pass       -> FAIL       (fi-gdg-551) fdo#102582 +2
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-legacy:
                fail       -> PASS       (fi-gdg-551) fdo#102618

fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582
fdo#102618 https://bugs.freedesktop.org/show_bug.cgi?id=102618

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:440s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:451s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:369s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:530s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:263s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:501s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:498s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:494s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:476s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:595s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:411s
fi-gdg-551       total:289  pass:175  dwarn:1   dfail:0   fail:4   skip:109 time:251s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:580s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:489s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:427s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:432s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:432s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:484s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:460s
fi-kbl-7500u     total:289  pass:263  dwarn:1   dfail:0   fail:1   skip:24  time:482s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:572s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:482s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:579s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:545s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:451s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:591s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:642s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:517s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:506s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:453s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:563s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:416s

795d258e67f403ff77d1f14b37551e98163f5b4e drm-tip: 2017y-10m-27d-11h-42m-39s UTC integration manifest e056a2eee73b drm/i915: Improve DP downstream HPD handling

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6230/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✓ Fi.CI.IGT: success for drm/i915: Improve DP downstream HPD handling (rev2)

In reply to Ville Syrjala
== Series Details ==

== Series Details ==

Series: drm/i915: Improve DP downstream HPD handling (rev2)
URL : https://patchwork.freedesktop.org/series/32714/
State : success

== Summary ==

Test kms_busy:

        Subgroup extended-modeset-hang-oldfb-with-reset-render-B:
                pass       -> DMESG-WARN (shard-hsw) fdo#102249 +1

fdo#102249 https://bugs.freedesktop.org/show_bug.cgi?id=102249

shard-hsw total:2539 pass:1432 dwarn:2 dfail:0 fail:8 skip:1097 time:9176s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6230/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx