Skip to contentSkip to conversation

housekeeping: Document isolcpus flags

PATCH New Frederic Weisbecker 2 participants 2 messages Oct 31, 2017 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH v7 1/1 housekeeping: Document isolcpus flags

Document the latest updates on the isolcpus boot option. While at it, let's also fix the details about the preferred way to isolate a set of CPUs from the scheduler general domains. Cpusets offer a much better interface to achieve that.

Cc Chris Metcalf <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Mike Galbraith <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Christoph Lameter <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Wanpeng Li <[email protected]>
Cc Luiz Capitulino <[email protected]>
---
 Documentation/admin-guide/kernel-parameters.txt | 40 ++++++++++++++++---------
 1 file changed, 26 insertions(+), 14 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +26 -14
index 6b99c8b..62bc8b5 100644
@@ -1727,20 +1727,32 @@
 	isapnp=		[ISAPNP]
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
-	isolcpus=	[KNL,SMP] Isolate CPUs from the general scheduler.
-			The argument is a cpu list, as described above.
-
-			This option can be used to specify one or more CPUs
-			to isolate from the general SMP balancing and scheduling
-			algorithms. You can move a process onto or off an
-			"isolated" CPU via the CPU affinity syscalls or cpuset.
-			<cpu number> begins at 0 and the maximum value is
-			"number of CPUs in system - 1".
-
-			This option is the preferred way to isolate CPUs. The
-			alternative -- manually setting the CPU mask of all
-			tasks in the system -- can cause problems and
-			suboptimal load balancer performance.
+	isolcpus=	[KNL,SMP] Isolate a given set of CPUs from disturbance.
+			Format: [flag-list,]<cpu-list>
+
+			Specify one or more CPUs to isolate from disturbances
+			specified in the flag list (default: domain):
+
+			nohz
+			  Disable the tick when a single task runs.
+			domain
+			  Isolate from the general SMP balancing and scheduling
+			  algorithms. Note that performing domain isolation this way
+			  is irreversible. It's not possible to bring back a CPU to
+			  the domains once isolated through isolcpus. It's strongly
+			  advised to use Cpusets instead to disable scheduler load
+			  balancing through the file "cpuset.sched_load_balance".
+			  It offers a much more flexible interface where CPUs can
+			  move in and out of an isolated set anytime.
+
+			  You can move a process onto or off an "isolated" CPU via
+			  the CPU affinity syscalls or cpuset.
+			  <cpu number> begins at 0 and the maximum value is
+			  "number of CPUs in system - 1".
+
+			The format of <cpu-list> is described above.
+
+
 
 	iucv=		[HW,NET]
 
Signature · 1 line
2.7.4
#1 lore raw

[tip:sched/core] sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated

sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated
Commit-ID:  b0d40d2b22fe48cfcbbfb137fd198be0a1cd8a85
Gitweb:     https://git.kernel.org/tip/b0d40d2b22fe48cfcbbfb137fd198be0a1cd8a85
Author:     Frederic Weisbecker <[email protected]>
AuthorDate: Tue, 31 Oct 2017 04:18:34 +0100
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Oct 2017 10:29:39 +0100

sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated

Document the latest updates on the isolcpus= boot option. While at it, let's also fix the details about the preferred way to isolate a set of CPUs from the scheduler general domains. Cpusets offer a much better interface to achieve that.

Cc Chris Metcalf <[email protected]>
Cc Christoph Lameter <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Luiz Capitulino <[email protected]>
Cc Mike Galbraith <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Wanpeng Li <[email protected]>
[ Clarified the text some more, marked the boot option deprecated. ]
---
 Documentation/admin-guide/kernel-parameters.txt | 39 ++++++++++++++++---------
 1 file changed, 26 insertions(+), 13 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +26 -13
index 6b99c8b..17eb023 100644
@@ -1727,20 +1727,33 @@
 	isapnp=		[ISAPNP]
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
-	isolcpus=	[KNL,SMP] Isolate CPUs from the general scheduler.
-			The argument is a cpu list, as described above.
+	isolcpus=	[KNL,SMP] Isolate a given set of CPUs from disturbance.
+			[Deprecated - use cpusets instead]
+			Format: [flag-list,]<cpu-list>
+
+			Specify one or more CPUs to isolate from disturbances
+			specified in the flag list (default: domain):
+
+			nohz
+			  Disable the tick when a single task runs.
+			domain
+			  Isolate from the general SMP balancing and scheduling
+			  algorithms. Note that performing domain isolation this way
+			  is irreversible: it's not possible to bring back a CPU to
+			  the domains once isolated through isolcpus. It's strongly
+			  advised to use cpusets instead to disable scheduler load
+			  balancing through the "cpuset.sched_load_balance" file.
+			  It offers a much more flexible interface where CPUs can
+			  move in and out of an isolated set anytime.
+
+			  You can move a process onto or off an "isolated" CPU via
+			  the CPU affinity syscalls or cpuset.
+			  <cpu number> begins at 0 and the maximum value is
+			  "number of CPUs in system - 1".
+
+			The format of <cpu-list> is described above.
+
 
-			This option can be used to specify one or more CPUs
-			to isolate from the general SMP balancing and scheduling
-			algorithms. You can move a process onto or off an
-			"isolated" CPU via the CPU affinity syscalls or cpuset.
-			<cpu number> begins at 0 and the maximum value is
-			"number of CPUs in system - 1".
-
-			This option is the preferred way to isolate CPUs. The
-			alternative -- manually setting the CPU mask of all
-			tasks in the system -- can cause problems and
-			suboptimal load balancer performance.
 
 	iucv=		[HW,NET]