Skip to contentSkip to conversation

null_blk: fix default values in documentation

PATCH Applied Minwoo Im 2 participants 2 messages Nov 7, 2017

Subsystems (2)
Documentation Block layer
lore
Share & tools
lore

Minwoo Im

author
#0 lore raw

PATCH 1/1 null_blk: fix default values in documentation

null_blk.c has initial value of
(1) nr_devices as 1.
(2) completion_nsec as 10,000ns, not 10.000ns.
documentation should be updated for fixes above.

Signed-off-by Minwoo Im <[email protected]>
---
 Documentation/block/null_blk.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/block/null_blk.txt +2 -2
index b7161c8..fcf7f84 100644
@@ -38,7 +38,7 @@ gb=[Size in GB]: Default: 250GB
 bs=[Block size (in bytes)]: Default: 512 bytes
   The block size reported to the system.
 
-nr_devices=[Number of devices]: Default: 2
+nr_devices=[Number of devices]: Default: 1
   Number of block devices instantiated. They are instantiated as /dev/nullb0,
   etc.
 

@@ -52,7 +52,7 @@ irqmode=[0-2]: Default: 1-Soft-irq
   2: Timer: Waits a specific period (completion_nsec) for each IO before
      completion.
 
-completion_nsec=[ns]: Default: 10.000ns
+completion_nsec=[ns]: Default: 10,000ns
   Combined with irqmode=2 (timer). The time each completion event must wait.
 
 submit_queues=[1..nr_cpus]:
Signature · 1 line
2.7.4
maintainer Applied
#1 lore raw
Quoted 4 lines · Minwoo Im

null_blk.c has initial value of
(1) nr_devices as 1.
(2) completion_nsec as 10,000ns, not 10.000ns.
documentation should be updated for fixes above.

Thanks, applied.

Signature · 1 line
Jens Axboe