ASoC: rt5663: Delay and retry reading rt5663 ID register
Subsystems (3)
Oder Chiou
maintainerPATCH v2 1/1 ASoC: rt5663: Delay and retry reading rt5663 ID register
In the probe, the codec may not be ready for I2C reading or there are some glitches on the i2c line. So if the i2c reading value is incorrect, it will read again after delay. This issue is similar the patch
https://patchwork.kernel.org/patch/9681421/. In current project, these 2 devices were connected to the same i2c line, and they met the same problem.
Signed-off-by Oder Chiou <[email protected]>
--- sound/soc/codecs/rt5663.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
sound/soc/codecs/rt5663.c +10 -1
@@ -3429,7 +3429,16 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, ret);return ret; } -regmap_read (regmap,RT5663_VENDOR_ID_2 , &val); + + ret =regmap_read (regmap,RT5663_VENDOR_ID_2 , &val); +if (ret || (val !=RT5663_DEVICE_ID_2 && val !=RT5663_DEVICE_ID_1 )) { +dev_err (&i2c->dev, +"Device with ID register %#x is not rt5663," +" retry one time.\n" , val); +msleep (100 ); +regmap_read (regmap,RT5663_VENDOR_ID_2 , &val); + } +switch (val) {case RT5663_DEVICE_ID_2 : rt5663->regmap =devm_regmap_init_i2c (i2c, &rt5663_v2_regmap);
Signature · 1 line
2.7.4
Mark Brown
maintainersound/soc/codecs/rt5663.c static int rt5663_i2c_probe(struct i2c_client *i2c, · line 3437
Quoted 3 lines · Oder Chiou
sound/soc/codecs/rt5663.c +3
-0+dev_err (&i2c->dev, +"Device with ID register %#x is not rt5663," +" retry one time.\n" , val);
This still splits the error message over two lines - like I said that'll make it harder for someone to search the kernel source to find where the error was generated and understand what it means.