Patch "iio: magnetometer: mag3110: claim direct mode during raw writes" has been added to the 4.9-stable tree

This is a note to let you know that I've just added the patch titled

iio: magnetometer: mag3110: claim direct mode during raw writes

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
iio-magnetometer-mag3110-claim-direct-mode-during-raw-writes.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Alison Schofield <[email protected]>
Date: Fri, 20 Jan 2017 12:39:32 -0800
Subject: iio: magnetometer: mag3110: claim direct mode during raw writes

From: Alison Schofield <[email protected]>

[ Upstream commit 80dea21f95a4672cce545f48dc2ca500b69a2584 ]

Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes.

---
 drivers/iio/magnetometer/mag3110.c |   30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

@@ -222,29 +222,39 @@ static int mag3110_write_raw(struct iio_
 			     int val, int val2, long mask)
 {
 	struct mag3110_data *data = iio_priv(indio_dev);
-	int rate;
+	int rate, ret;
 
-	if (iio_buffer_enabled(indio_dev))
-		return -EBUSY;
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		rate = mag3110_get_samp_freq_index(data, val, val2);
-		if (rate < 0)
-			return -EINVAL;
+		if (rate < 0) {
+			ret = -EINVAL;
+			break;
+		}
 
 		data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
 		data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
-		return i2c_smbus_write_byte_data(data->client,
+		ret = i2c_smbus_write_byte_data(data->client,
 			MAG3110_CTRL_REG1, data->ctrl_reg1);
+		break;
 	case IIO_CHAN_INFO_CALIBBIAS:
-		if (val < -10000 || val > 10000)
-			return -EINVAL;
-		return i2c_smbus_write_word_swapped(data->client,
+		if (val < -10000 || val > 10000) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = i2c_smbus_write_word_swapped(data->client,
 			MAG3110_OFF_X + 2 * chan->scan_index, val << 1);
+		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		break;
 	}
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
 }
 
 static irqreturn_t mag3110_trigger_handler(int irq, void *p)

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/iio-pressure-ms5611-claim-direct-mode-during-oversampling-changes.patch queue-4.9/iio-proximity-sx9500-claim-direct-mode-during-raw-proximity-reads.patch queue-4.9/iio-magnetometer-mag3110-claim-direct-mode-during-raw-writes.patch queue-4.9/iio-trigger-free-trigger-resource-correctly.patch