Skip to contentSkip to conversation

perf/x86/intel: Add Branch Monitoring support

PATCH In review Megha Dey 4 participants 15 messages Nov 18, 2017 – Apr 4, 2018

Subsystems (4)
lore
Share & tools
lore

Megha Dey

author
#0 lore raw

v2 cover perf/x86/intel: Add Branch Monitoring support

This patchset adds support for Intel's branch monitoring feature. This feature uses heuristics to detect the occurrence of an ROP(Return Oriented Programming) or ROP like(JOP: Jump oriented programming) attack. These heuristics are based off certain performance monitoring statistics, measured dynamically over a short configurable window period. ROP is a malware trend in which the attacker can compromise a return pointer held on the stack to redirect execution to a different desired instruction.

Currently, only the Cannonlake family of Intel processors support this feature. This feature is enabled by CONFIG_PERF_EVENTS_INTEL_BM.

Once the kernel is compiled with CONFIG_PERF_EVENTS_INTEL_BM=y on a Cannonlake system, the following perf events are added which can be viewed with perf list:

  intel_bm/branch-misp/                              [Kernel PMU event]
  intel_bm/call-ret/                                 [Kernel PMU event]
  intel_bm/far-branch/                               [Kernel PMU event]
  intel_bm/indirect-branch-misp/                     [Kernel PMU event]
  intel_bm/ret-misp/                                 [Kernel PMU event]
  intel_bm/rets/                                     [Kernel PMU event]

A perf-based kernel driver has been used to monitor the occurrence of one of the 6 branch monitoring events. There are 2 counters that each can select between one of these events for evaluation over a specified instruction window size (0 to 1023). For each counter, a threshold value (0 to 127) can be configured to set a point at which an interrupt is generated. Each task can monitor a maximum of 2 events at any given time.

Apart from the kernel driver, this patchset adds CPUID of Cannonlake processors to Intel family list and the Documentation/x86/intel_bm.txt file with some information about Intel Branch monitoring.

Changes V0->V1:
1. Used the 'is_sampling_event' function
2. Added support to monitor 2 events for every task
3. Corrected typos
4. Added a lock to prevent race condition in concurrent perf_event_open()s
5. Got rid of start()/stop() and added its functionality in add()/del()
6. Removed read() callback as it was not doing anything.
6. Removed code for sampling events as we do not support sampling.
7. Added 'id' member to hw_perf_event::intel_bm to track which counter the event is using.
8. Moved MSR accesses to the add()/del() callbacks

Changes V1->V2:
1. Edited commit message to make things less ambiguous
2. Corrected the Signed-off-by chain
3. Used a named construct for the counter enable bit
4. Added the corrected logic to unmask NMI bit of local APIC only for the first time a task is scheduled on a CPU. Removed the separate function
5. Restructured code in the NMI handler to save convoluted indentation
6. Removed the redundant read of the status register in add()
7. Removed the update function as it did not do what it is supposed to do Added this code to del() instead
8. Corrected the polarity of 'is_sampling_event' function when used
9. Removed the setting of event->count to 0 in event_init. This is redundant as this is its default value
10. Do not allow threshold to be set as 0

Megha Dey (3):
x86/cpu/intel: Add Cannonlake to Intel family perf/x86/intel/bm.c: Add Intel Branch Monitoring support x86, bm: Add documentation on Intel Branch Monitoring

 Documentation/x86/intel_bm.txt      | 216 +++++++++++++
 arch/x86/events/Kconfig             |  10 +
 arch/x86/events/intel/Makefile      |   2 +
 arch/x86/events/intel/bm.c          | 605 ++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/intel-family.h |   2 +
 arch/x86/include/asm/msr-index.h    |   5 +
 arch/x86/include/asm/processor.h    |   4 +
 include/linux/perf_event.h          |   9 +-
 kernel/events/core.c                |  16 +
 9 files changed, 868 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/x86/intel_bm.txt
 create mode 100644 arch/x86/events/intel/bm.c
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v2 1/3 x86/cpu/intel: Add Cannonlake to Intel family

Add CPUID of Cannonlake (CNL) processors to Intel family list.

---
 arch/x86/include/asm/intel-family.h | 2 ++
 1 file changed, 2 insertions(+)
arch/x86/include/asm/intel-family.h +2 -0
index 35a6bc4..056bd41 100644
@@ -65,6 +65,8 @@
 #define INTEL_FAM6_ATOM_DENVERTON	0x5F /* Goldmont Microserver */
 #define INTEL_FAM6_ATOM_GEMINI_LAKE	0x7A
 
+#define INTEL_FAM6_CANNONLAKE_MOBILE	0x66
+
 /* Xeon Phi */
 
 #define INTEL_FAM6_XEON_PHI_KNL		0x57 /* Knights Landing */
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v2 2/3 perf/x86/intel/bm.c: Add Intel Branch Monitoring support

In reply to Megha Dey

Currently, the cannonlake family of Intel processors support the branch monitoring feature. Intel's Branch monitoring feature is trying to utilize heuristics to detect the occurrence of an ROP (Return Oriented Programming) attack.

A perf-based kernel driver has been used to monitor the occurrence of one of the 6 branch monitoring events. There are 2 counters that each can select between one of these events for evaluation over a specified instruction window size (0 to 1023). For each counter, a threshold value (0 to 127) can be configured to set a point at which ROP detection event action is taken (determined by user-space). Each task can monitor a maximum of 2 events at any given time.

Apart from window_size(global) and threshold(per-counter), various sysfs entries are provided for the user to configure: guest_disable, lbr_freeze, window_cnt_sel, cnt_and_mode (all global) and mispred_evt_cnt(per-counter). For all events belonging to the same task, the global parameters are shared.

Everytime a task is scheduled out, we save current window and count associated with the event being monitored. When the task is scheduled next, we start counting from previous count associated with this event.

To monitor a user space application for ROP related events, perf command line can be used as follows:

perf stat -e <name of event> <application to be monitored>

eg. For the following test program (test.c) and threshold = 100 (echo 100 > /sys/devices/intel_bm/threshold)

void func(void)

{
        return;
}

void main(void)

{
        int i;

        for (i = 0; i < 128; i++) {
                func();
        }

        return;
}

perf stat -e intel_bm/rets/ ./test

Performance counter stats for './test':

                 1      intel_bm/rets/

       0.104705937 seconds time elapsed

perf returns the number of branch monitoring interrupts occurred during the execution of the user-space application.

---
 arch/x86/events/Kconfig          |  10 +
 arch/x86/events/intel/Makefile   |   2 +
 arch/x86/events/intel/bm.c       | 605 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/msr-index.h |   5 +
 arch/x86/include/asm/processor.h |   4 +
 include/linux/perf_event.h       |   9 +-
 kernel/events/core.c             |  16 ++
 7 files changed, 650 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/events/intel/bm.c
arch/x86/events/Kconfig +10 -0
index 9a7a144..40903ca 100644
@@ -9,6 +9,16 @@ config PERF_EVENTS_INTEL_UNCORE
 	Include support for Intel uncore performance events. These are
 	available on NehalemEX and more modern processors.
 
+config PERF_EVENTS_INTEL_BM
+	bool "Intel Branch Monitoring support"
+	depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
+	---help---
+	  Include support for Intel Branch monitoring. This feature utilizes
+	  heuristics for detecting ROP(Return oriented programming) like
+	  attacks. These heuristics are based off certain performance
+	  monitoring statistics, measured dynamically over a short
+	  configurable window period.
+
 config PERF_EVENTS_INTEL_RAPL
 	tristate "Intel rapl performance events"
 	depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
arch/x86/events/intel/Makefile +2 -0
index 3468b0c..14235ec 100644
@@ -2,6 +2,8 @@
 obj-$(CONFIG_CPU_SUP_INTEL)		+= core.o bts.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= ds.o knc.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= lbr.o p4.o p6.o pt.o
+obj-$(CONFIG_PERF_EVENTS_INTEL_BM)	+= intel-bm-perf.o
+intel-bm-perf-objs			:= bm.o
 obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL)	+= intel-rapl-perf.o
 intel-rapl-perf-objs			:= rapl.o
 obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE)	+= intel-uncore.o
arch/x86/events/intel/bm.c new file +605 -0

605 lines not on this page · raw message

arch/x86/include/asm/msr-index.h +5 -0
index 34c4922..a311d30 100644
@@ -294,6 +294,11 @@
 /* Alternative perfctr range with full access. */
 #define MSR_IA32_PMC0			0x000004c1
 
+/* Intel Branch Monitoring MSRs */
+#define BR_DETECT_CONTROL_MSR		0x00000350
+#define BR_DETECT_STATUS_MSR		0x00000351
+#define BR_DETECT_COUNTER_CONFIG_BASE	0x00000354
+
 /* AMD64 MSRs. Not complete. See the architecture manual for a more
    complete list. */
 
arch/x86/include/asm/processor.h +4 -0
index 2db7cf7..6bdbe9e 100644
@@ -42,6 +42,8 @@
 #define NET_IP_ALIGN	0
 
 #define HBP_NUM 4
+
+#define BM_MAX_COUNTERS 2
 /*
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
@@ -460,6 +462,8 @@ struct thread_struct {
 
 	/* Save middle states of ptrace breakpoints */
 	struct perf_event	*ptrace_bps[HBP_NUM];
+	/* Branch Monitoring counter owners */
+	struct perf_event	*bm_counter_owner[BM_MAX_COUNTERS];
 	/* Debug status used for traps, single steps, etc... */
 	unsigned long           debugreg6;
 	/* Keep track of the exact dr7 value set by the user */
include/linux/perf_event.h +8 -1
index 2c9c87d..bcd3826 100644
@@ -168,6 +168,13 @@ struct hw_perf_event {
 	 */
 	struct task_struct		*target;
 
+	struct { /* intel_bm */
+			u64 bm_ctrl;
+			u64 bm_counter_conf;
+			atomic_t bm_poll;
+			u64 id;
+	};
+
 	/*
 	 * PMU would store hardware filter configuration
 	 * here.
@@ -191,7 +198,6 @@ struct hw_perf_event {
 	 * local64_cmpxchg() such that pmu::read() can be called nested.
 	 */
 	local64_t			prev_count;
-
 	/*
 	 * The period to start the next sample with.
 	 */
@@ -512,6 +518,7 @@ typedef void (*perf_overflow_handler_t)(struct perf_event *,
  */
 #define PERF_EV_CAP_SOFTWARE		BIT(0)
 #define PERF_EV_CAP_READ_ACTIVE_PKG	BIT(1)
+#define PERF_EV_CAP_BM			BIT(2)
 
 #define SWEVENT_HLIST_BITS		8
 #define SWEVENT_HLIST_SIZE		(1 << SWEVENT_HLIST_BITS)
kernel/events/core.c +16 -0
index 9404c63..0e66d5e 100644
@@ -4519,6 +4519,15 @@ static unsigned int perf_poll(struct file *file, poll_table *wait)
 
 	poll_wait(file, &event->waitq, wait);
 
+	/*
+	 * Branch monitoring events do not support ring buffer.
+	 * For users polling on these events, return appropriate poll state.
+	 */
+	if (event->event_caps & PERF_EV_CAP_BM) {
+		events = atomic_xchg(&event->hw.bm_poll, 0);
+		return events;
+	}
+
 	if (is_event_hup(event))
 		return events;
 
@@ -5420,6 +5429,13 @@ void perf_event_wakeup(struct perf_event *event)
 {
 	ring_buffer_wakeup(event);
 
+	/*
+	 * Since branch monitoring events do not have ring buffer, they
+	 * have to be woken up separately
+	 */
+	if (event->event_caps & PERF_EV_CAP_BM)
+		wake_up_all(&event->waitq);
+
 	if (event->pending_kill) {
 		kill_fasync(perf_event_fasync(event), SIGIO, event->pending_kill);
 		event->pending_kill = 0;
Signature · 1 line
1.9.1
maintainer
#3 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 10 lines · Megha Dey
arch/x86/events/intel/bm.c new file +10 -0
+	mutex_lock(&bm_counter_mutex);
+	for (i = 0; i < BM_MAX_COUNTERS; i++) {
+		if (bm_counter_owner[i] == NULL) {
+			counter_to_use = i;
+			bm_counter_owner[i] = event;
+			break;
+		}
+	}
+	mutex_unlock(&bm_counter_mutex);
+

arch/x86/events/intel/bm.c line 247

Quoted 10 lines
arch/x86/events/intel/bm.c new file +9 -0
+	if (counter_to_use == -1)
+		return -EBUSY;
 
+static struct pmu intel_bm_pmu = {
+	.task_ctx_nr     = perf_sw_context,
+	.attr_groups     = intel_bm_attr_groups,
+	.event_init      = intel_bm_event_init,
+	.add             = intel_bm_event_add,
+	.del             = intel_bm_event_del,
+};

Still horrid.. still no.

#4 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 14 lines · Peter Zijlstra
Quoted 12 lines · Megha Dey
arch/x86/events/intel/bm.c new file +12 -0
+	mutex_lock(&bm_counter_mutex);
+	for (i = 0; i < BM_MAX_COUNTERS; i++) {
+		if (bm_counter_owner[i] == NULL) {
+			counter_to_use = i;
+			bm_counter_owner[i] = event;
+			break;
+		}
+	}
+	mutex_unlock(&bm_counter_mutex);
+
+	if (counter_to_use == -1)
+		return -EBUSY;
Quoted 9 lines

arch/x86/events/intel/bm.c line 556

Quoted 7 lines
arch/x86/events/intel/bm.c new file +7 -0
+static struct pmu intel_bm_pmu = {
+	.task_ctx_nr     = perf_sw_context,
+	.attr_groups     = intel_bm_attr_groups,
+	.event_init      = intel_bm_event_init,
+	.add             = intel_bm_event_add,
+	.del             = intel_bm_event_del,
+};

Still horrid.. still no.

It seems like perf_invalid_context does not support per task monitoring:
find_get_context():

 ctxn = pmu->task_ctx_nr;
        if (ctxn < 0)
                goto errout;

Also, perf_hw_context is to be used only for core PMU, correct?

That leaves us with only perf_sw_context to be used. Not sure if a new context needs to be implemented.

maintainer
#5 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 27 lines · Megha Dey
Quoted 14 lines · Peter Zijlstra
Quoted 12 lines · Megha Dey
arch/x86/events/intel/bm.c new file +12 -0
+	mutex_lock(&bm_counter_mutex);
+	for (i = 0; i < BM_MAX_COUNTERS; i++) {
+		if (bm_counter_owner[i] == NULL) {
+			counter_to_use = i;
+			bm_counter_owner[i] = event;
+			break;
+		}
+	}
+	mutex_unlock(&bm_counter_mutex);
+
+	if (counter_to_use == -1)
+		return -EBUSY;
Quoted 9 lines

arch/x86/events/intel/bm.c line 556

Quoted 7 lines
arch/x86/events/intel/bm.c new file +7 -0
+static struct pmu intel_bm_pmu = {
+	.task_ctx_nr     = perf_sw_context,
+	.attr_groups     = intel_bm_attr_groups,
+	.event_init      = intel_bm_event_init,
+	.add             = intel_bm_event_add,
+	.del             = intel_bm_event_del,
+};

Still horrid.. still no.

It seems like perf_invalid_context does not support per task monitoring:
find_get_context():

Quoted 8 lines
 ctxn = pmu->task_ctx_nr;
        if (ctxn < 0)
                goto errout;

Also, perf_hw_context is to be used only for core PMU, correct?

That leaves us with only perf_sw_context to be used. Not sure if a new context needs to be implemented.

There's work on the way to allow multiple HW PMUs. You'll either have to wait for that or help in making that happen. What you do not do is silently hack around it.

#6 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 32 lines · Peter Zijlstra
Quoted 31 lines · Megha Dey
Quoted 14 lines · Peter Zijlstra
Quoted 12 lines · Megha Dey
arch/x86/events/intel/bm.c new file +12 -0
+	mutex_lock(&bm_counter_mutex);
+	for (i = 0; i < BM_MAX_COUNTERS; i++) {
+		if (bm_counter_owner[i] == NULL) {
+			counter_to_use = i;
+			bm_counter_owner[i] = event;
+			break;
+		}
+	}
+	mutex_unlock(&bm_counter_mutex);
+
+	if (counter_to_use == -1)
+		return -EBUSY;
Quoted 9 lines

arch/x86/events/intel/bm.c line 556

Quoted 7 lines
arch/x86/events/intel/bm.c new file +7 -0
+static struct pmu intel_bm_pmu = {
+	.task_ctx_nr     = perf_sw_context,
+	.attr_groups     = intel_bm_attr_groups,
+	.event_init      = intel_bm_event_init,
+	.add             = intel_bm_event_add,
+	.del             = intel_bm_event_del,
+};

Still horrid.. still no.

It seems like perf_invalid_context does not support per task monitoring:
find_get_context():

 ctxn = pmu->task_ctx_nr;
        if (ctxn < 0)
                goto errout;
Quoted 8 lines
Quoted 4 lines

Also, perf_hw_context is to be used only for core PMU, correct?

That leaves us with only perf_sw_context to be used. Not sure if a new context needs to be implemented.

There's work on the way to allow multiple HW PMUs. You'll either have to wait for that or help in making that happen. What you do not do is silently hack around it.

Could I get a pointer to the code implementing this?

I assume that this patch cannot be accepted until there is a way to allow multiple HW PMUs even if appropriate comments are added?

maintainer
#7 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 7 lines · Megha Dey
Quoted 4 lines

There's work on the way to allow multiple HW PMUs. You'll either have to wait for that or help in making that happen. What you do not do is silently hack around it.

Could I get a pointer to the code implementing this?

There isn't much code now; but it could be build on top of the stuff here:

git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git perf/core

It was mostly Mark I think who wanted this for big litte stuffs.

#8 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 9 lines · Peter Zijlstra
Quoted 7 lines · Megha Dey
Quoted 4 lines

There's work on the way to allow multiple HW PMUs. You'll either have to wait for that or help in making that happen. What you do not do is silently hack around it.

Could I get a pointer to the code implementing this?

Quoted 6 lines

There isn't much code now; but it could be build on top of the stuff here:

git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git perf/core

It was mostly Mark I think who wanted this for big litte stuffs.

Could you give us an estimate on the amount of time it could take to implement this?

I am not sure what the current status is or if Mark has been working on it.

#9 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 15 lines · Megha Dey
Quoted 14 lines · Peter Zijlstra
Quoted 7 lines · Megha Dey
Quoted 4 lines

There's work on the way to allow multiple HW PMUs. You'll either have to wait for that or help in making that happen. What you do not do is silently hack around it.

Could I get a pointer to the code implementing this?

There isn't much code now; but it could be build on top of the stuff here:

git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git perf/core

Quoted 8 lines
Quoted 1 line

It was mostly Mark I think who wanted this for big litte stuffs.

Could you give us an estimate on the amount of time it could take to implement this?

I am not sure what the current status is or if Mark has been working on it.

Hi Peter,

Is there anyone currently working on this?

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#10 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

In reply to Megha Dey

On Fri, Nov 17, 2017 at 05:54:05PM -0800, Megha Dey wrote:

SNIP

Quoted 16 lines
arch/x86/events/intel/bm.c new file +16 -0
+/* Branch Monitoring default and mask values */
+#define BM_MAX_WINDOW_SIZE		0x3ff
+#define BM_MAX_THRESHOLD		0x7f
+#define BM_MAX_EVENTS			6
+#define BM_WINDOW_SIZE_SHIFT		8
+#define BM_THRESHOLD_SHIFT		8
+#define BM_EVENT_TYPE_SHIFT		1
+#define BM_GUEST_DISABLE_SHIFT		3
+#define BM_LBR_FREEZE_SHIFT		2
+#define BM_WINDOW_CNT_SEL_SHIFT		24
+#define BM_CNT_AND_MODE_SHIFT		26
+#define BM_MISPRED_EVT_CNT_SHIFT	15
+#define BM_ENABLE			0x3
+#define BM_CNTR_ENABLE			1
+
+static unsigned int bm_window_size = BM_MAX_WINDOW_SIZE;

arch/x86/events/intel/bm.c line 60

Quoted 10 lines
arch/x86/events/intel/bm.c new file +10 -0
+static unsigned int bm_guest_disable;
+static unsigned int bm_lbr_freeze;
+static unsigned int bm_window_cnt_sel;
+static unsigned int bm_cnt_and_mode;
+
+static unsigned int bm_threshold = BM_MAX_THRESHOLD;
+static unsigned int bm_mispred_evt_cnt;
+
+/* Branch monitoring counter owners */
+static struct perf_event **bm_counter_owner;

that's still global.. 2 counters per system

jirka

#11 lore raw

Re: [PATCH V2 2/3] perf/x86/intel/bm.c: Add Intel Branch Monitoring support

Quoted 24 lines · Jiri Olsa

On Fri, Nov 17, 2017 at 05:54:05PM -0800, Megha Dey wrote:

SNIP

Quoted 20 lines
arch/x86/events/intel/bm.c new file +20 -0
+/* Branch Monitoring default and mask values */
+#define BM_MAX_WINDOW_SIZE		0x3ff
+#define BM_MAX_THRESHOLD		0x7f
+#define BM_MAX_EVENTS			6
+#define BM_WINDOW_SIZE_SHIFT		8
+#define BM_THRESHOLD_SHIFT		8
+#define BM_EVENT_TYPE_SHIFT		1
+#define BM_GUEST_DISABLE_SHIFT		3
+#define BM_LBR_FREEZE_SHIFT		2
+#define BM_WINDOW_CNT_SEL_SHIFT		24
+#define BM_CNT_AND_MODE_SHIFT		26
+#define BM_MISPRED_EVT_CNT_SHIFT	15
+#define BM_ENABLE			0x3
+#define BM_CNTR_ENABLE			1
+
+static unsigned int bm_window_size = BM_MAX_WINDOW_SIZE;
+static unsigned int bm_guest_disable;
+static unsigned int bm_lbr_freeze;
+static unsigned int bm_window_cnt_sel;
+static unsigned int bm_cnt_and_mode;
Quoted 8 lines

arch/x86/events/intel/bm.c line 60

Quoted 6 lines
arch/x86/events/intel/bm.c new file +6 -0
+
+static unsigned int bm_threshold = BM_MAX_THRESHOLD;
+static unsigned int bm_mispred_evt_cnt;
+
+/* Branch monitoring counter owners */
+static struct perf_event **bm_counter_owner;

that's still global.. 2 counters per system

Yes, you are right . I will amend this in the next patch set.

Quoted 2 lines

jirka

author
#12 lore raw

PATCH v2 3/3 x86, bm: Add documentation on Intel Branch Monitoring

In reply to Megha Dey

This patch adds the Documentation/x86/intel_bm.txt file with some information about Intel Branch monitoring.

---
 Documentation/x86/intel_bm.txt | 216 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 216 insertions(+)
 create mode 100644 Documentation/x86/intel_bm.txt
Documentation/x86/intel_bm.txt new file +216 -0
new file mode 100644
index 0000000..25b7177
@@ -0,0 +1,216 @@
+Intel(R) Branch Monitoring
+
+Copyright (C) 2017 Intel Corporation
+
+Megha Dey <[email protected]>
+Yu-Cheng Yu <[email protected]>
+
+I. Overview
+===========
+
+The Cannonlake family of Intel processors support the branch monitoring
+feature. This feature uses heuristics to detect the occurrence of an ROP
+(Return Oriented Programming) or ROP like(JOP:Jump oriented programming)
+attack. These heuristics are based off certain performance monitoring
+statistics, measured dynamically over a short configurable window period.
+ROP is a malware trend in which the attacker can compromise a return
+pointer held on the stack to redirect execution to a different desired
+instruction.
+
+Support for branch monitoring has been added via Linux kernel perf event
+infrastructure. This feature is enabled by CONFIG_PERF_EVENTS_INTEL_BM.
+
+Once the kernel is compiled with CONFIG_PERF_EVENTS_INTEL_BM=y on a
+Cannonlake system, the following perf events are added which can be viewed
+with perf list:
+  intel_bm/branch-misp/                              [Kernel PMU event]
+  intel_bm/call-ret/                                 [Kernel PMU event]
+  intel_bm/far-branch/                               [Kernel PMU event]
+  intel_bm/indirect-branch-misp/                     [Kernel PMU event]
+  intel_bm/ret-misp/                                 [Kernel PMU event]
+  intel_bm/rets/                                     [Kernel PMU event]
+
+II. Hardware details
+====================
+
+The MSRs associated with branch monitoring are as follows:
+
+1. BR_DETECT_CTRL : Branch Monitoring Global control
+   Used for enabling and configuring global capability
+
+2. BR_DETECT_STATUS : Branch Monitoring Global Status
+   Used by SW handler for determining detect status
+
+3. BR_DETECT_COUNTER_CONFIG_i : Branch Monitoring Counter Configuration
+   Per-cpu branch monitoring counter Configuration
+
+There are 2 8-bit counters that each can select between one of the
+following 6 events:
+
+1. RET instructions: Counts the number of near return instructions retired
+
+2. CALL-RET instructions: Counts the difference between the number of near
+   return and call instructions retired
+
+3. RET mispredicts: Mispredicted return instructions retired
+
+4. Branch (all) mispredicts: Counts the number of mispredicted branches
+
+5. Indirect branch mispredicts: Counts the number of mispredicted indirect
+   near branch instructions. Includes indirect near jump/call instructions
+
+6. Far branch instructions: Counts the number of far branches retired
+
+Branch Monitoring hardware utilizes various existing performance related
+counter events. Of the 6 events above, only call-ret is newly implemented.
+
+The events are evaluated over a specified 10-bit instruction window size
+(0 to 1023). For each counter, a threshold value (0 to 127) can be
+configured to set a point at which an interrupt is generated and a
+detection event action is taken (determined by user-space). This can take
+the form of signaling an interrupt and/or freezing the state of the last
+branch record information.
+
+The event counters are reset after every 'window size' instructions by the
+hardware.
+
+The feature is for user mode (privilege level > 0) operation only, which is
+the known malware security threat target environment. While in supervisor
+mode, this heuristic detection counter activity is suspended. This behavior
+(user mode) is independent of root vs. non-root with respect to
+virtualization technology execution.
+
+III. Software Implementation
+============================
+
+A perf-based kernel driver has been used to monitor the occurrence of
+one of the 6 branch monitoring events.
+
+If an branch monitoring interrupt is generated, the interrupt bit is set
+which is cleared by interrupt handler and the event counters are reset.
+
+The entire system can monitor a maximum of 2 events at any given time.
+These events can belong to the same or different tasks.
+
+Everytime a task is scheduled out, we save current window and count
+associated with the event being monitored. When the task is scheduled next,
+we start counting from previous count associated with this event. Thus, a
+full context switch in this case is not necessary.
+
+The Branch Monitoring exception can be configured as a regular interrupt or
+an NMI. We chain an NMI handler after PMU, because
+1. It will not interfere with PMU events
+2. We only monitor for user-mode events, and this will not delay branch
+   monitoring events for user-mode
+
+We monitor only per-task events. It does not make sense to monitor all tasks
+for an attack. This could generate a lot of false positives.
+
+IV. User-configurable inputs
+============================
+
+Several sysfs entries are provided in /sys/devices/intel_bm/ to configure
+controls for the supported hardware heuristics.
+
+1. LBR freeze: /sys/devices/intel-bm/lbr_freeze
+   possible values are 0 or 1. By default this is disabled(0). When enabled,
+   an LBR freeze is observed on threshold trip
+
+2. Guest Disable: /sys/devices/intel-bm/guest_disable
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, branch
+   monitoring feature is disabled when operating at VMX non-root operation.
+
+3. Window size: /sys/devices/intel-bm/window_size
+   By default, window size is 1023. It can take values from 0 to 1023. This
+   represents the number of instructions to be executed before the event
+   counters are reset.
+
+4. Window count select: /sys/devices/intel-bm/window_cnt_sel
+   Possible values are:
+   ‘00 = instructions retired
+   ‘01 = branches retired
+   ‘10 = returned instructions retired
+   ‘11 = indirect branch instructions retired
+   By default, it has a value of 0.
+
+5. Count and mode: /sys/devices/intel-bm/cnt_and_mode
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, the
+   overall event triggering condition is true only if both enabled
+   counter’s threshold conditions are true. When ‘0’, the threshold
+   tripping condition is true if either enabled counter’s threshold is
+   true. If a counter is not enabled, then it does not factor into the
+   AND’ing logic
+
+6. Threshold: /sys/devices/intel-bm/threshold
+   An unsigned value of 0 to 127 is supported. The value 0 of counter
+   threshold will result in branch monitoring event signaled after every
+   instruction. By default, it has a value of 127.
+
+7. Mispredict counting behaviour: /sys/devices/intel-bm/mispred_evt_cnt
+   Possible values are:
+   0 = mispredict events are counted in a window
+   1 = mispredict events are counted based on a consecutive occurrence.
+   By default, it has a value of 0.
+
+Threshold and Mispredict events counting behaviour are per-counter
+configurations whereas the rest are global.
+
+V. Example usage
+================
+
+1. To monitor a user space application for branch monitoring events, perf
+command line can be used as follows:
+
+perf stat -e intel_bm/rets/ ./test
+
+ Performance counter stats for './test':
+
+                 1      intel_bm/rets/
+
+       0.104705937 seconds time elapsed
+
+where test.c is:
+
+void func(void)
+{
+        return;
+}
+
+void main(void)
+{
+        int i;
+
+        for (i = 0; i < 128; i++) {
+                func();
+        }
+
+        return;
+}
+
+and threshold = 100 (echo 100 > /sys/devices/intel_bm/threshold)
+
+perf returns the number of branch monitoring interrupts occurred when the
+user-space application was running.
+
+2. To monitor 2 events for a task,
+
+perf stat -e intel_bm/far-branch/,intel_bm/rets/ ./rets-128.bin
+
+ Performance counter stats for './rets-128.bin':
+
+                 0      intel_bm/far-branch/
+                 1      intel_bm/rets/
+
+       0.104057608 seconds time elapsed
+
+For the above example, the threshold and window size are shared.
+
+3. To monitor 2 events with different thresholds(same or different task)
+
+On terminal 1:
+echo <threshold1> > /sys/devices/intel_bm/threshold
+perf stat -e intel_bm/rets/ ./test.bin
+
+On terminal 2:
+echo <threshold2> > /sys/devices/intel_bm/threshold
+perf stat -e intel_bm/call-ret/ ./test.bin
Signature · 1 line
1.9.1
#13 lore raw

Re: [PATCH V2 3/3] x86, bm: Add documentation on Intel Branch Monitoring

On Fri, Nov 17, 2017 at 05:54:06PM -0800, Megha Dey wrote:

SNIP

Quoted 35 lines
Documentation/x86/intel_bm.txt new file +35 -0
+IV. User-configurable inputs
+============================
+
+Several sysfs entries are provided in /sys/devices/intel_bm/ to configure
+controls for the supported hardware heuristics.
+
+1. LBR freeze: /sys/devices/intel-bm/lbr_freeze
+   possible values are 0 or 1. By default this is disabled(0). When enabled,
+   an LBR freeze is observed on threshold trip
+
+2. Guest Disable: /sys/devices/intel-bm/guest_disable
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, branch
+   monitoring feature is disabled when operating at VMX non-root operation.
+
+3. Window size: /sys/devices/intel-bm/window_size
+   By default, window size is 1023. It can take values from 0 to 1023. This
+   represents the number of instructions to be executed before the event
+   counters are reset.
+
+4. Window count select: /sys/devices/intel-bm/window_cnt_sel
+   Possible values are:
+   ‘00 = instructions retired
+   ‘01 = branches retired
+   ‘10 = returned instructions retired
+   ‘11 = indirect branch instructions retired
+   By default, it has a value of 0.
+
+5. Count and mode: /sys/devices/intel-bm/cnt_and_mode
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, the
+   overall event triggering condition is true only if both enabled
+   counter’s threshold conditions are true. When ‘0’, the threshold
+   tripping condition is true if either enabled counter’s threshold is
+   true. If a counter is not enabled, then it does not factor into the
+   AND’ing logic
+

Documentation/x86/intel_bm.txt line 153

Quoted 10 lines
Documentation/x86/intel_bm.txt new file +10 -0
+6. Threshold: /sys/devices/intel-bm/threshold
+   An unsigned value of 0 to 127 is supported. The value 0 of counter
+   threshold will result in branch monitoring event signaled after every
+   instruction. By default, it has a value of 127.
+
+7. Mispredict counting behaviour: /sys/devices/intel-bm/mispred_evt_cnt
+   Possible values are:
+   0 = mispredict events are counted in a window
+   1 = mispredict events are counted based on a consecutive occurrence.
+   By default, it has a value of 0.

you use all those value to configure the event:

        event->hw.bm_ctrl = (bm_window_size << BM_WINDOW_SIZE_SHIFT) |
                            (bm_guest_disable << BM_GUEST_DISABLE_SHIFT) |
                            (bm_lbr_freeze << BM_LBR_FREEZE_SHIFT) |
                            (bm_window_cnt_sel << BM_WINDOW_CNT_SEL_SHIFT) |
                            (bm_cnt_and_mode << BM_CNT_AND_MODE_SHIFT) |
                                                                BM_ENABLE;
        event->hw.bm_counter_conf = (bm_threshold << BM_THRESHOLD_SHIFT) |
                        (bm_mispred_evt_cnt << BM_MISPRED_EVT_CNT_SHIFT) |
                        (cfg << BM_EVENT_TYPE_SHIFT) | BM_CNTR_ENABLE;

I wonder you should place this under perf_event_attr::config/config1 and define them in /sys/devices/intel_bm/format/... like we do for cpu pmu

then you could use perf stat -e like: '-e intel_bm/call-ret,threshold=...,lbr_freeze/'

jirka

#14 lore raw

Re: [PATCH V2 3/3] x86, bm: Add documentation on Intel Branch Monitoring

Quoted 62 lines · Jiri Olsa

On Fri, Nov 17, 2017 at 05:54:06PM -0800, Megha Dey wrote:

SNIP

Quoted 35 lines
Documentation/x86/intel_bm.txt new file +35 -0
+IV. User-configurable inputs
+============================
+
+Several sysfs entries are provided in /sys/devices/intel_bm/ to configure
+controls for the supported hardware heuristics.
+
+1. LBR freeze: /sys/devices/intel-bm/lbr_freeze
+   possible values are 0 or 1. By default this is disabled(0). When enabled,
+   an LBR freeze is observed on threshold trip
+
+2. Guest Disable: /sys/devices/intel-bm/guest_disable
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, branch
+   monitoring feature is disabled when operating at VMX non-root operation.
+
+3. Window size: /sys/devices/intel-bm/window_size
+   By default, window size is 1023. It can take values from 0 to 1023. This
+   represents the number of instructions to be executed before the event
+   counters are reset.
+
+4. Window count select: /sys/devices/intel-bm/window_cnt_sel
+   Possible values are:
+   ‘00 = instructions retired
+   ‘01 = branches retired
+   ‘10 = returned instructions retired
+   ‘11 = indirect branch instructions retired
+   By default, it has a value of 0.
+
+5. Count and mode: /sys/devices/intel-bm/cnt_and_mode
+   Possible values are 0 or 1. By default it is 0. When set to ‘1’, the
+   overall event triggering condition is true only if both enabled
+   counter’s threshold conditions are true. When ‘0’, the threshold
+   tripping condition is true if either enabled counter’s threshold is
+   true. If a counter is not enabled, then it does not factor into the
+   AND’ing logic
+

Documentation/x86/intel_bm.txt line 153

Quoted 10 lines
Documentation/x86/intel_bm.txt new file +10 -0
+6. Threshold: /sys/devices/intel-bm/threshold
+   An unsigned value of 0 to 127 is supported. The value 0 of counter
+   threshold will result in branch monitoring event signaled after every
+   instruction. By default, it has a value of 127.
+
+7. Mispredict counting behaviour: /sys/devices/intel-bm/mispred_evt_cnt
+   Possible values are:
+   0 = mispredict events are counted in a window
+   1 = mispredict events are counted based on a consecutive occurrence.
+   By default, it has a value of 0.

you use all those value to configure the event:

        event->hw.bm_ctrl = (bm_window_size << BM_WINDOW_SIZE_SHIFT) |
                            (bm_guest_disable << BM_GUEST_DISABLE_SHIFT) |
                            (bm_lbr_freeze << BM_LBR_FREEZE_SHIFT) |
                            (bm_window_cnt_sel << BM_WINDOW_CNT_SEL_SHIFT) |
                            (bm_cnt_and_mode << BM_CNT_AND_MODE_SHIFT) |
                                                                BM_ENABLE;
        event->hw.bm_counter_conf = (bm_threshold << BM_THRESHOLD_SHIFT) |
                        (bm_mispred_evt_cnt << BM_MISPRED_EVT_CNT_SHIFT) |
                        (cfg << BM_EVENT_TYPE_SHIFT) | BM_CNTR_ENABLE;
Quoted 5 lines

I wonder you should place this under perf_event_attr::config/config1 and define them in /sys/devices/intel_bm/format/... like we do for cpu pmu

then you could use perf stat -e like: '-e intel_bm/call-ret,threshold=...,lbr_freeze/'

Thanks for the suggestion! I will implement this in the next patch set.

Quoted 2 lines

jirka