glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
Hello,
Being in the middle of bring-up of the new board with Vivante GPU (HSDK namely, see https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arc/plat-hsdk)
I was looking at simple 3D test apps to see how Etnaviv works on the hardware.
So far I was able to get kmscube working perfectly fine and the next item I took was glxgears (for some reason I was under impression that's de facto "Hello world" app in the GPU world). But apparently even with Xserver up and running glxgears doesn't work.
Moreover I tried the same thing on Wandboard Quad but to no avail as well. That's what I saw:
------------------------->8---------------------
# glxgears Error: couldn't get an RGB, Double-buffered visual
# glxinfo name of display: :0 Error: couldn't find RGB GLX visual or fbconfig ------------------------->8---------------------
Googling didn't help here unfortunately so maybe some pointers could be suggested here... like what do I do wrong and if glxgears is supposed to work on top of DRM GPU at all?
Thanks a lot in advance!
-Alexey
_______________________________________________
linux-snps-arc mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
Hi Alexey,
Am Freitag, den 24.11.2017, 16:02 +0000 schrieb Alexey Brodkin:
Quoted 21 lines
Hello,
Being in the middle of bring-up of the new board with Vivante GPU (HSDK namely, see?https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arc/plat-hsdk) I was looking at simple 3D test apps to see how Etnaviv works on the hardware.
So far I was able to get kmscube working perfectly fine and the next item I took was glxgears (for some reason I was under impression that's de facto "Hello world" app in the GPU world). But apparently even with Xserver up and running glxgears doesn't work.
Moreover I tried the same thing on Wandboard Quad but to no avail as well. That's what I saw:
------------------------->8---------------------# glxgears Error: couldn't get an RGB, Double-buffered visual# glxinfo name of display: :0 Error: couldn't find RGB GLX visual or fbconfig? ------------------------->8---------------------
Quoted 5 lines
Googling didn't help here unfortunately so maybe some pointers could be suggested here... like what do I do wrong and if glxgears is supposed to work on top of DRM GPU at all?
Thanks a lot in advance!
For 3D acceleration to work under X you need the etnaviv specific DDX driver, which can be found here:
http://git.arm.linux.org.uk/cgit/xf86-video-armada.git/log/?h=unstable-devel
Don't let you get confused by the name, the armada driver implements support for both armada drm and imx-drm and the etnaviv DDX. This provides 2D acceleration on the Vivante 2D cores, as well a the DRI2/3 bit necessary to get a 3D context on X.
Regards,
Lucas
Hi Lucas,
Quoted 31 lines · Lucas Stach
Hi Alexey,
Am Freitag, den 24.11.2017, 16:02 +0000 schrieb Alexey Brodkin:
Quoted 28 lines
Hello,
Being in the middle of bring-up of the new board with Vivante GPU (HSDK namely,
see https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_pub_scm_linux_kernel_git_torvalds_linux.git_tree_arch_arc_plat-2Dhsdk&d=Dw
IDaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZJSI1u6GgsRHNIcONVFfIKvn1AWaB38GmtCN1dGB3w0&e=)
I was looking at simple 3D test apps to see how Etnaviv works on the hardware.So far I was able to get kmscube working perfectly fine and the next item I took was glxgears (for some reason I was under impression that's de facto "Hello world" app in the GPU world). But apparently even with Xserver up and running glxgears doesn't work.
Moreover I tried the same thing on Wandboard Quad but to no avail as well. That's what I saw:
------------------------->8---------------------# glxgears Error: couldn't get an RGB, Double-buffered visual# glxinfo name of display: :0 Error: couldn't find RGB GLX visual or fbconfig ------------------------->8---------------------Googling didn't help here unfortunately so maybe some pointers could be suggested here... like what do I do wrong and if glxgears is supposed to work on top of DRM GPU at all?
Quoted 8 lines
Quoted 1 line
Thanks a lot in advance!
For 3D acceleration to work under X you need the etnaviv specific DDX driver, which can be found here:
https://urldefense.proofpoint.com/v2/url?u=http-3A__git.arm.linux.org.uk_cgit_xf86-2Dvideo-2Darmada.git_log_-3Fh-3Dunstable-2Ddevel&d=DwIDaQ&c=DPL6_
X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZzK2fxA6_XlN6pGnf2Tpo6qKzzQh76ocWZ6IDR-WPtc&e=
Thanks for the pointer, still a couple of questions below...
Quoted 4 lines
Don't let you get confused by the name, the armada driver implements support for both armada drm and imx-drm and the etnaviv DDX. This provides 2D acceleration on the Vivante 2D cores, as well a the DRI2/3 bit necessary to get a 3D context on X.
From Wandboard's .dts I see that 2D core is a separate node with separate set of registers mapped at a different location in memory, right?
Do you know if that's possible if the same one memory-mapped register set controls both 3D and 2D engine?
If we happen to not have 2D core if that's a no go for us for anything? Like no compositing whatsoever etc?
In the meantime I'll try to figure out if we have 2D core or not.
-Alexey
_______________________________________________
linux-snps-arc mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
Am Freitag, den 24.11.2017, 16:25 +0000 schrieb Alexey Brodkin:
Quoted 50 lines
Hi Lucas,
Quoted 31 lines · Lucas Stach
Hi Alexey,
Am Freitag, den 24.11.2017, 16:02 +0000 schrieb Alexey Brodkin:
Quoted 28 lines
Hello,
Being in the middle of bring-up of the new board with Vivante GPU (HSDK namely, see?https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_pub_scm_linux_kernel_git_torvalds_linux.git_tree_arch_arc_plat-2Dhsdk&d=Dw IDaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZJSI1u6GgsRHNIcONVFfIKvn1AWaB38GmtCN1dGB3w0&e=)
I was looking at simple 3D test apps to see how Etnaviv works on the hardware.So far I was able to get kmscube working perfectly fine and the next item I took was glxgears (for some reason I was under impression that's de facto "Hello world" app in the GPU world). But apparently even with Xserver up and running glxgears doesn't work.
Moreover I tried the same thing on Wandboard Quad but to no avail as well. That's what I saw:
------------------------->8---------------------# glxgears Error: couldn't get an RGB, Double-buffered visual# glxinfo name of display: :0 Error: couldn't find RGB GLX visual or fbconfig? ------------------------->8---------------------Googling didn't help here unfortunately so maybe some pointers could be suggested here... like what do I do wrong and if glxgears is supposed to work on top of DRM GPU at all?
Quoted 8 lines
Quoted 1 line
Thanks a lot in advance!
For 3D acceleration to work under X you need the etnaviv specific DDX driver, which can be found here:
https://urldefense.proofpoint.com/v2/url?u=http-3A__git.arm.linux.org.uk_cgit_xf86-2Dvideo-2Darmada.git_log_-3Fh-3Dunstable-2Ddevel&d=DwIDaQ&c=DPL6_
X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZzK2fxA6_XlN6pGnf2Tpo6qKzzQh76ocWZ6IDR-WPtc&e=Thanks for the pointer, still a couple of questions below...
Quoted 4 lines
Don't let you get confused by the name, the armada driver implements support for both armada drm and imx-drm and the etnaviv DDX. This provides 2D acceleration on the Vivante 2D cores, as well a the DRI2/3 bit necessary to get a 3D context on X.
Quoted 5 lines
From Wandboard's .dts I see that 2D core is a separate node with separate set of registers mapped at a different location in memory, right?
Do you know if that's possible if the same one memory-mapped register set controls both 3D and 2D engine?
Yes, a "core" in Vivante speak is a GPU with one DMA frontend. A single frontend can feed both 3D and 2D acceleration engines behind it. On i.MX6 the 2D and 3D engine are on separate cores, but Marvell Dove has a combined 2D/3D core.
Quoted 1 line
If we happen to not have 2D core if that's a no go for us for anything?
I don't know if the DDX works properly without 2D acceleration. Weston on the other hand only relies on the 3D accel core for doing compositing, so even if you don't have a 2D engine you will be able to launch a modern Linux graphics stack.
The etnaviv DDX could also emulate 2D accel over the 3D core by using the X.Org glamor module, but no one has bothered to implement this yet.
Quoted 2 lines
In the meantime I'll try to figure out if we have 2D core or not.
You can find out what your GPU provides by looking at the feature bits. chipFeatures_PIPE_2D, chipFeatures_PIPE_3D and chipFeatures_PIPE_VG is what you are looking out for.
Regards,
Lucas
Hi Lucas,
Quoted 60 lines · Lucas Stach
Am Freitag, den 24.11.2017, 16:25 +0000 schrieb Alexey Brodkin:
Quoted 59 lines
Hi Lucas,
Quoted 36 lines · Lucas Stach
Hi Alexey,
Am Freitag, den 24.11.2017, 16:02 +0000 schrieb Alexey Brodkin:
Quoted 26 lines
Hello,
Being in the middle of bring-up of the new board with Vivante GPU (HSDK namely,
see https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_pub_scm_linux_kernel_git_torvalds_linux.git_tree_arch_arc_plat-2Dhsdk&
d=Dw IDaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZJSI1u6GgsRHNIcONVFfIKvn1AWaB38GmtCN1dGB3w0&e=)
I was looking at simple 3D test apps to see how Etnaviv works on the hardware.So far I was able to get kmscube working perfectly fine and the next item I took was glxgears (for some reason I was under impression that's de facto "Hello world" app in the GPU world). But apparently even with Xserver up and running glxgears doesn't work.
Moreover I tried the same thing on Wandboard Quad but to no avail as well. That's what I saw:
------------------------->8---------------------# glxgears Error: couldn't get an RGB, Double-buffered visual# glxinfo name of display: :0 Error: couldn't find RGB GLX visual or fbconfig ------------------------->8---------------------Quoted 5 lines
Googling didn't help here unfortunately so maybe some pointers could be suggested here... like what do I do wrong and if glxgears is supposed to work on top of DRM GPU at all?
Thanks a lot in advance!
Quoted 7 lines
For 3D acceleration to work under X you need the etnaviv specific DDX driver, which can be found here:
https://urldefense.proofpoint.com/v2/url?u=http-3A__git.arm.linux.org.uk_cgit_xf86-2Dvideo-2Darmada.git_log_-3Fh-3Dunstable-2Ddevel&d=DwIDaQ&c=D
PL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=ZXa-564Jm43PXsqGXCf2US2DY7C0qIlCw6c56pL- bLY&s=ZzK2fxA6_XlN6pGnf2Tpo6qKzzQh76ocWZ6IDR-WPtc&e=Thanks for the pointer, still a couple of questions below...
Quoted 5 lines
Don't let you get confused by the name, the armada driver implements support for both armada drm and imx-drm and the etnaviv DDX. This provides 2D acceleration on the Vivante 2D cores, as well a the DRI2/3 bit necessary to get a 3D context on X.
From Wandboard's .dts I see that 2D core is a separate node with separate set of registers mapped at a different location in memory, right?
Quoted 7 lines
Quoted 2 lines
Do you know if that's possible if the same one memory-mapped register set controls both 3D and 2D engine?
Yes, a "core" in Vivante speak is a GPU with one DMA frontend. A single frontend can feed both 3D and 2D acceleration engines behind it. On i.MX6 the 2D and 3D engine are on separate cores, but Marvell Dove has a combined 2D/3D core.
Hm, that sounds encouraging. The next question would be if Marvel Dove is supported in Etnaviv DDX? I guess it's called Armada so the answer if yes, right?
Quoted 6 lines
Quoted 1 line
If we happen to not have 2D core if that's a no go for us for anything?
I don't know if the DDX works properly without 2D acceleration. Weston on the other hand only relies on the 3D accel core for doing compositing, so even if you don't have a 2D engine you will be able to launch a modern Linux graphics stack.
That's really cool! I'm much more interested in Weston ATM, which is actually another separate question :)
I tried to find some details on how to run Weston on Wandboard but seems like I was looking at wrong Google again... do you know any good manuals for doing that?
Quoted 3 lines
The etnaviv DDX could also emulate 2D accel over the 3D core by using the X.Org glamor module, but no one has bothered to implement this yet.
Ok we'll see if above case (combined cores) is applicable to us and then we'll see what to do.
Quoted 5 lines
Quoted 1 line
In the meantime I'll try to figure out if we have 2D core or not.
You can find out what your GPU provides by looking at the feature bits.
chipFeatures_PIPE_2D,chipFeatures_PIPE_3DandchipFeatures_PIPE_VGis what you are looking out for.
Does that info helps to decipher these bits? -------------------------->8------------------------------
# dmesg | grep etnaviv etnaviv soc:gpu-subsystem: bound f0090000.gpu (ops 0x9075271c) etnaviv-gpu f0090000.gpu: model: GC880, revision: 5124 [drm] Initialized etnaviv 1.1.0 20151214 for soc:gpu-subsystem on minor 0
# cat /sys/kernel/debug/dri/0/gpu f0090000.gpu Status: features minor_features0: 0x41f99efb minor_features1: 0xfefbf2d9 minor_features2: 0x4a180285 minor_features3: 0x00000001 minor_features4: 0x00000000 minor_features5: 0x00020000 specs stream_count: 8 register_max: 64 thread_count: 256 vertex_cache_size: 8 shader_core_count: 1 pixel_pipes: 1 vertex_output_buffer_size: 512 buffer_size: 0 instruction_count: 512 num_constants: 576 varyings_count: 12 axi: 0x00000050 idle: 0x7ffffffe FE is not idle DMA address is constant address 0: 0x00000000 address 1: 0x00000000 state 0: 0x00000000 state 1: 0x00000800 last fetch 64 bit word: 0x40000002 0x00000000 -------------------------->8------------------------------
-Alexey
_______________________________________________
linux-snps-arc mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
Am Freitag, den 24.11.2017, 16:49 +0000 schrieb Alexey Brodkin:
[...]
Quoted 11 lines
Quoted 6 lines
Yes, a "core" in Vivante speak is a GPU with one DMA frontend. A single
frontend can feed both 3D and 2D acceleration engines behind it. On i.MX6 the 2D and 3D engine are on separate cores, but Marvell Dove has
a combined 2D/3D core.Hm, that sounds encouraging. The next question would be if Marvel Dove is
supported in Etnaviv DDX? I guess it's called Armada so the answer if yes, right?
Yes, the Dove was the original platform for the Armada X.Org driver. Combined 2D/3D cores are supported just fine by etnaviv.
Quoted 10 lines
Quoted 9 lines
Quoted 2 lines
If we happen to not have 2D core if that's a no go for us for anything?
I don't know if the DDX works properly without 2D acceleration. Weston
on the other hand only relies on the 3D accel core for doing compositing, so even if you don't have a 2D engine you will be able to
launch a modern Linux graphics stack.
Quoted 5 lines
That's really cool! I'm much more interested in Weston ATM, which is actually another separate question :)
I tried to find some details on how to run Weston on Wandboard but seems like I was looking at wrong Google again... do you know any good manuals for doing that?
There really is no magic to it. Or better there is, but it's all hidden in the Mesa implementation.
You need at least Mesa 17.2 and Weston 3.0 for etnaviv to work properly. Other than that just set XDG_RUNTIME_DIR to something sensible and launch Weston with "weston --tty=63", done.
Quoted 12 lines
Quoted 5 lines
The etnaviv DDX could also emulate 2D accel over the 3D core by using
the X.Org glamor module, but no one has bothered to implement this yet.Ok we'll see if above case (combined cores) is applicable to us and then
we'll see what to do.Quoted 2 lines
Quoted 1 line
In the meantime I'll try to figure out if we have 2D core or not.
Quoted 7 lines
Quoted 5 lines
You can find out what your GPU provides by looking at the feature bits.
chipFeatures_PIPE_2D,chipFeatures_PIPE_3DandchipFeatures_PIPE_VGis
what you are looking out for.Does that info helps to decipher these bits?
Unfortunately we forgot to expose the major feature bits register in debugfs. It's gpu->identity.features in the kernel driver, the interesting bits in there are chipFeatures_PIPE_3D and chipFeatures_PIPE_2D.
Regards,
Lucas
Hi Lucas,
Quoted 11 lines · Lucas Stach
Am Freitag, den 24.11.2017, 16:49 +0000 schrieb Alexey Brodkin:
[...]Quoted 9 lines
Quoted 8 lines
Yes, a "core" in Vivante speak is a GPU with one DMA frontend. A single
frontend can feed both 3D and 2D acceleration engines behind it. On i.MX6 the 2D and 3D engine are on separate cores, but Marvell Dove has
a combined 2D/3D core.
Quoted 7 lines
Quoted 4 lines
Hm, that sounds encouraging. The next question would be if Marvel Dove is
supported in Etnaviv DDX? I guess it's called Armada so the answer if yes, right?Yes, the Dove was the original platform for the Armada X.Org driver. Combined 2D/3D cores are supported just fine by etnaviv.
Sweet!
Maybe another question then.
To get kmscube working on our board which uses essentially different bit-streamer device "udl" as opposed to "imx-drm" I had just to say:
---------------------->8----------------------
export MESA_LOADER_DRIVER_OVERRIDE=imx-drm ---------------------->8----------------------
and then all the magic has happened.
Will it be
a) required
b) enough
for Vivante X.org driver?
Quoted 16 lines
Quoted 10 lines
Quoted 9 lines
Quoted 2 lines
If we happen to not have 2D core if that's a no go for us for anything?
I don't know if the DDX works properly without 2D acceleration. Weston
on the other hand only relies on the 3D accel core for doing compositing, so even if you don't have a 2D engine you will be able to
launch a modern Linux graphics stack.Quoted 5 lines
That's really cool! I'm much more interested in Weston ATM, which is actually another separate question :)
I tried to find some details on how to run Weston on Wandboard but seems like I was looking at wrong Google again... do you know any good manuals for doing that?
Quoted 6 lines
There really is no magic to it. Or better there is, but it's all hidden in the Mesa implementation.
You need at least Mesa 17.2 and Weston 3.0 for etnaviv to work properly. Other than that just set
XDG_RUNTIME_DIRto something sensible and launch Weston with "weston --tty=63", done.
Cool, will try that!
Quoted 20 lines
Quoted 19 lines
Quoted 4 lines
The etnaviv DDX could also emulate 2D accel over the 3D core by using
the X.Org glamor module, but no one has bothered to implement this yet.Ok we'll see if above case (combined cores) is applicable to us and then
we'll see what to do.Quoted 9 lines
Quoted 3 lines
In the meantime I'll try to figure out if we have 2D core or not.
You can find out what your GPU provides by looking at the feature bits.
chipFeatures_PIPE_2D,chipFeatures_PIPE_3DandchipFeatures_PIPE_VGis
what you are looking out for.
Quoted 6 lines
Quoted 1 line
Does that info helps to decipher these bits?
Unfortunately we forgot to expose the major feature bits register in debugfs. It's
gpu->identity.featuresin the kernel driver, the interesting bits in there arechipFeatures_PIPE_3DandchipFeatures_PIPE_2D.
Noted!
Are you going to add that yourself sometime soon or shall I do it?
-Alexey
_______________________________________________
linux-snps-arc mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-snps-arc