Skip to contentSkip to conversation

arm64: dts: allwinner: a64: Add uart2-pins

PATCH New Jagan Teki 2 participants 4 messages Nov 29, 2017

Subsystems (2)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH 1/1 arm64: dts: allwinner: a64: Add uart2-pins

Add uart2-pins for A64 SOC.

---
 arch/arm/dts/sun50i-a64.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/dts/sun50i-a64.dtsi +5 -0
index 65a344d..93c2d01 100644
@@ -317,6 +317,11 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
 		};
 
 		uart0: serial at 1c28000 {
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 arm64: dts: allwinner: a64: Add uart2-pins

Hi Jagan,

Quoted 3 lines · Jagan Teki

Add uart2-pins for A64 SOC.

Usually, we will have the pinctrl node only if it's used by a board in-tree.

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171129/672d8040/attachment.sig>
author
#2 lore raw

PATCH 1/1 arm64: dts: allwinner: a64: Add uart2-pins

Quoted 9 lines · Maxime Ripard

Hi Jagan,

Quoted 3 lines · Jagan Teki

Add uart2-pins for A64 SOC.

Usually, we will have the pinctrl node only if it's used by a board in-tree.

Yes, I'm preparing to send the board which is using uart2

thanks!

Signature · 4 lines
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
#3 lore raw

PATCH 1/1 arm64: dts: allwinner: a64: Add uart2-pins

Quoted 5 lines · Jagan Teki
Quoted 3 lines · Maxime Ripard

Hi Jagan,

On Wed, Nov 29, 2017 at 01:15:50PM +0530, Jagan Teki wrote:

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Add uart2-pins for A64 SOC.

Usually, we will have the pinctrl node only if it's used by a board in-tree.

Yes, I'm preparing to send the board which is using uart2

Then please send it at the same time, thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171129/ba65044a/attachment.sig>