Skip to contentSkip to conversation

powerpc: Add aacraid and nvme to powernv_defconfig

PATCH Applied Benjamin Herrenschmidt 3 participants 6 messages Dec 20, 2017 – Jan 17, 2018 PowerPC

lore
Share & tools
lore

Benjamin Herrenschmidt

author
#0 lore raw

PATCH 1/1 powerpc: Add aacraid and nvme to powernv_defconfig

These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default.

Signed-off-by Benjamin Herrenschmidt <[email protected]>

---

arch/powerpc/configs/powernv_defconfig +2 -0
@@ -97,6 +97,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y

@@ -113,6 +114,7 @@
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
#1 lore raw
Quoted 17 lines · Benjamin Herrenschmidt

These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default.

Signed-off-by Benjamin Herrenschmidt <[email protected]>

---

arch/powerpc/configs/powernv_defconfig +1 -0
@@ -97,6 +97,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y

arch/powerpc/configs/powernv_defconfig line 120

Quoted 7 lines
arch/powerpc/configs/powernv_defconfig +1 -0
@@ -113,6 +114,7 @@
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0

"y", not "m"?

Signature · 1 line
Alexey
author
#2 lore raw
Quoted 19 lines · Alexey Kardashevskiy
Quoted 18 lines · Benjamin Herrenschmidt

These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default.

Signed-off-by Benjamin Herrenschmidt <[email protected]>

---

arch/powerpc/configs/powernv_defconfig +1 -0
@@ -97,6 +97,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y

@@ -113,6 +114,7 @@
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
Quoted 8 lines

arch/powerpc/configs/powernv_defconfig line 120

Quoted 6 lines
arch/powerpc/configs/powernv_defconfig +1 -0
 CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0

"y", not "m"?

Yes. I like my boot devices to be "y"

Cheers,
Ben.

#3 lore raw
Quoted 29 lines · Benjamin Herrenschmidt
Quoted 19 lines · Alexey Kardashevskiy
Quoted 18 lines · Benjamin Herrenschmidt

These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default.

Signed-off-by Benjamin Herrenschmidt <[email protected]>

---

arch/powerpc/configs/powernv_defconfig +1 -0
@@ -97,6 +97,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y

@@ -113,6 +114,7 @@
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
Quoted 8 lines

arch/powerpc/configs/powernv_defconfig line 120

Quoted 6 lines
arch/powerpc/configs/powernv_defconfig +1 -0
 CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0

"y", not "m"?

Quoted 1 line

Yes. I like my boot devices to be "y"

Then rename it to powernv_benh_defconfig :) Everything else seems to cope well with "m" - just look above.

Signature · 1 line
Alexey
author
#4 lore raw
Quoted 30 lines · Alexey Kardashevskiy
Quoted 29 lines · Benjamin Herrenschmidt
Quoted 27 lines · Alexey Kardashevskiy
Quoted 17 lines · Benjamin Herrenschmidt

These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default.

Signed-off-by Benjamin Herrenschmidt <[email protected]>

---

arch/powerpc/configs/powernv_defconfig +1 -0
@@ -97,6 +97,7 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y

arch/powerpc/configs/powernv_defconfig line 120

Quoted 7 lines
arch/powerpc/configs/powernv_defconfig +1 -0
@@ -113,6 +114,7 @@
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0

"y", not "m"?

Quoted 5 lines
Quoted 1 line

Yes. I like my boot devices to be "y"

Then rename it to powernv_benh_defconfig :) Everything else seems to cope well with "m" - just look above.

No. Most of the above aren't needed as boot devices on powernv systems.

If you look at IPR for example, it's Y not N.

Cheers,
Ben.

Quoted 2 lines