Skip to contentSkip to conversation

drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.

PATCH In review Rodrigo Vivi 5 participants 26 messages Dec 22, 2017 – Jan 11, 2018

Subsystems (2)
lore
Share & tools
lore

Rodrigo Vivi

author maintainer
#0 lore raw

PATCH 1/11 drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.

By the Spec all CNL skus are GT2.

v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c

---
 drivers/gpu/drm/i915/i915_pci.c |  3 +--
 include/drm/i915_pciids.h       | 18 +++++++-----------
 2 files changed, 8 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/i915_pci.c +1 -2
index 36d48422b475..cc87d741135d 100644
@@ -636,8 +636,7 @@ static const struct pci_device_id pciidlist[] = {
 	INTEL_CFL_U_GT1_IDS(&intel_coffeelake_gt1_info),
 	INTEL_CFL_U_GT2_IDS(&intel_coffeelake_gt2_info),
 	INTEL_CFL_U_GT3_IDS(&intel_coffeelake_gt3_info),
-	INTEL_CNL_U_GT2_IDS(&intel_cannonlake_gt2_info),
-	INTEL_CNL_Y_GT2_IDS(&intel_cannonlake_gt2_info),
+	INTEL_CNL_IDS(&intel_cannonlake_gt2_info),
 	{0, 0, 0}
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);
include/drm/i915_pciids.h +7 -11
index 5db0458dd832..9e1fe6634424 100644
@@ -414,24 +414,20 @@
 	INTEL_CFL_U_GT2_IDS(info), \
 	INTEL_CFL_U_GT3_IDS(info)
 
-/* CNL U 2+2 */
-#define INTEL_CNL_U_GT2_IDS(info) \
+/* CNL */
+#define INTEL_CNL_IDS(info) \
 	INTEL_VGA_DEVICE(0x5A52, info), \
 	INTEL_VGA_DEVICE(0x5A5A, info), \
 	INTEL_VGA_DEVICE(0x5A42, info), \
-	INTEL_VGA_DEVICE(0x5A4A, info)
-
-/* CNL Y 2+2 */
-#define INTEL_CNL_Y_GT2_IDS(info) \
+	INTEL_VGA_DEVICE(0x5A4A, info), \
 	INTEL_VGA_DEVICE(0x5A51, info), \
 	INTEL_VGA_DEVICE(0x5A59, info), \
 	INTEL_VGA_DEVICE(0x5A41, info), \
 	INTEL_VGA_DEVICE(0x5A49, info), \
 	INTEL_VGA_DEVICE(0x5A71, info), \
-	INTEL_VGA_DEVICE(0x5A79, info)
-
-#define INTEL_CNL_IDS(info) \
-	INTEL_CNL_U_GT2_IDS(info), \
-	INTEL_CNL_Y_GT2_IDS(info)
+	INTEL_VGA_DEVICE(0x5A79, info), \
+	INTEL_VGA_DEVICE(0x5A54, info), \
+	INTEL_VGA_DEVICE(0x5A5C, info), \
+	INTEL_VGA_DEVICE(0x5A44, info)
 
 #endif /* _I915_PCIIDS_H */
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#1 lore raw

PATCH 2/11 drm/i915/cnl: Add Port F definition.

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +9 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port por
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
 
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
 
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +2 -0
index 35c5299feab6..71721de39e6b 100644
@@ -1378,6 +1378,7 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1393,6 +1394,7 @@ static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
index e3d7745a9151..8713e8295957 100644
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				/* 193 */
 #define DVO_PORT_HDMIE		12				/* 193 */
+#define DVO_PORT_DPF	13
+#define DVO_PORT_HDMIF	14
 #define DVO_PORT_MIPIA		21				/* 171 */
 #define DVO_PORT_MIPIB		22				/* 171 */
 #define DVO_PORT_MIPIC		23				/* 171 */
include/drm/i915_component.h +1 -2
index 545c6e0fea7d..346b1f5cb180 100644
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver, called by hda driver
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH 02/11] drm/i915/cnl: Add Port F definition.

Quoted 3 lines · Rodrigo Vivi

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

I am not sure if this is said in this spec.

From to what I can read and understand -
1) port A and port E can share lanes.
2) port F and port E mutually exclusive usage.

So, you could have port A(x4) and port F(x4)
or port A(x2) and port E(x2)
but doesn't really say port F is not a different port from port E. Secondly, I also see that port F and port E have separate DDI_BUF_CTL and DDI_AUX_CTL registers.

Quoted 115 lines

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +9 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port por
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
 
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
 
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +2 -0
index 35c5299feab6..71721de39e6b 100644
@@ -1378,6 +1378,7 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1393,6 +1394,7 @@ static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
index e3d7745a9151..8713e8295957 100644
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				/* 193 */
 #define DVO_PORT_HDMIE		12				/* 193 */
+#define DVO_PORT_DPF	13
+#define DVO_PORT_HDMIF	14
 #define DVO_PORT_MIPIA		21				/* 171 */
 #define DVO_PORT_MIPIB		22				/* 171 */
 #define DVO_PORT_MIPIC		23				/* 171 */
include/drm/i915_component.h +0 -0
index 545c6e0fea7d..346b1f5cb180 100644

include/drm/i915_component.h line 33

Quoted 10 lines
include/drm/i915_component.h +1 -2
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver, called by hda driver

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#3 lore raw

Re: [PATCH 02/11] drm/i915/cnl: Add Port F definition.

Quoted 7 lines · Dhinakaran
Quoted 3 lines · Rodrigo Vivi

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

I am not sure if this is said in this spec.

Yeap... I fully understand you.
I could only read like this after Art pin point me the info.

Cannonlake Display Connections
SKU Differences
Display PHY
1 eDP + 4 DDI = (A, B, C, D, F)

And previous SKUs are maximum
1 eDP + 3 DDI = (A, B, C, D)

Plus the fact that port F interrupts re-use bits from portE making DDI-E totally useless when DDI-F is present.

Quoted 3 lines

From to what I can read and understand -
1) port A and port E can share lanes.

There is no E in any CNL SKU.

Quoted 1 line

2) port F and port E mutually exclusive usage.

Right.

Quoted 3 lines

So, you could have port A(x4) and port F(x4)
or port A(x2) and port E(x2)

This is exactly why Port F was created for. A Full split so you don't have to reduce eDP lanes when the "4th DDI" is in use. In HW engineer words: "Full port split".

My understanding is that nowadays eDPs are requesting more data bandwidth so 2 lanes approach was useless. Hence the port split.

Quoted 1 line

but doesn't really say port F is not a different port from port E.

Exactly. but port E was never a full port... it was just stealing 2 lanes from port A. So now port F comes to the picture to avoid that, but reusing a lot from port E.

Quoted 2 lines

Secondly, I also see that port F and port E have separate DDI_BUF_CTL and DDI_AUX_CTL registers.

Oh yeah... This is indeed confusing in the current design.
Really strange that the registers for port E weren't fully removed from spec. But everything else makes clear that these registers for port E are useless for all current SKUs. Maybe at some point they considered the A(x2), E(x2), F(x2) and changed their minds later, maybe they just forgot to remove from there, maybe it was just easier to add a new range that really don't touch nor interact with port A in any ways....

Thanks,
Rodrigo.

Quoted 124 lines
Quoted 124 lines

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +9 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port por
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
 
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
 
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +2 -0
index 35c5299feab6..71721de39e6b 100644
@@ -1378,6 +1378,7 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1393,6 +1394,7 @@ static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
index e3d7745a9151..8713e8295957 100644
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				/* 193 */
 #define DVO_PORT_HDMIE		12				/* 193 */
+#define DVO_PORT_DPF	13
+#define DVO_PORT_HDMIF	14
 #define DVO_PORT_MIPIA		21				/* 171 */
 #define DVO_PORT_MIPIB		22				/* 171 */
 #define DVO_PORT_MIPIC		23				/* 171 */
include/drm/i915_component.h +1 -2
index 545c6e0fea7d..346b1f5cb180 100644
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
Quoted 2 lines

include/drm/i915_component.h line 33

Quoted 2 lines
include/drm/i915_component.h +0 -0
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver, called by hda driver

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 2/11
#4 lore raw

Re: [PATCH 02/11] drm/i915/cnl: Add Port F definition.

In reply to Rodrigo Vivi

Em Sex, 2017-12-22 às 15:18 -0800, Rodrigo Vivi escreveu:

Quoted 3 lines

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

I think that a small comment explaining that port F support is still not complete even with this patch would help.

One more comment below.

Quoted 113 lines

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +1 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct
 drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
drivers/gpu/drm/i915/intel_bios.c +0 -0
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct

drm_i915_private *dev_priv, enum port por

drivers/gpu/drm/i915/intel_bios.c +3 -0
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct
 drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const
 struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
drivers/gpu/drm/i915/intel_bios.c +5 -0
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct
 drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
drivers/gpu/drm/i915/intel_bios.c +0 -0
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +1 -0
index 35c5299feab6..71721de39e6b 100644
@@ -1378,6 +1378,7 @@ static i915_reg_t skl_aux_ctl_reg(struct
 drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
drivers/gpu/drm/i915/intel_dp.c +1 -0
 		MISSING_CASE(port);
@@ -1393,6 +1394,7 @@ static i915_reg_t skl_aux_data_reg(struct
 drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
drivers/gpu/drm/i915/intel_dp.c +0 -0
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +0 -0
index e3d7745a9151..8713e8295957 100644

drivers/gpu/drm/i915/intel_vbt_defs.h struct bdb_general_features { · line 305

Quoted 7 lines
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				
 /* 193 */
 #define DVO_PORT_HDMIE		12				
 /* 193 */
+#define DVO_PORT_DPF	13
+#define DVO_PORT_HDMIF	14

Needs ones more tab before the number. Besides, I suppose we could "/* N/A */" or /* Missing from spec */ or something that clarifies that it's not that our code is missing the version, it's the spec that doesn't have it.

With those two things addressed:

Quoted 22 lines
drivers/gpu/drm/i915/intel_vbt_defs.h +0 -0
 #define DVO_PORT_MIPIA		21				

/* 171 */
#define DVO_PORT_MIPIB 22
/* 171 */
#define DVO_PORT_MIPIC 23
/* 171 */

include/drm/i915_component.h +1 -2
index 545c6e0fea7d..346b1f5cb180 100644
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver,
Quoted 1 line

called by hda driver

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#5 lore raw

PATCH 3/11 drm/i915/cnl: Add AUX-F support

In reply to Rodrigo Vivi

On some Cannonlake SKUs we have a dedicated Aux for port F, that is only the full split between port A and port E.

There is still no Aux E for Port E, as in previous platforms, because port_E still means shared lanes with port A.

v2: Rebase.
v3: Add couple missed PORT_F cases on intel_dp.
v4: Rebase and fix commit message.
v5: Squash Imre's "drm/i915: Add missing AUX_F power well string"
v6: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
Cc Manasi Navare <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_irq.c         |  6 ++++++
 drivers/gpu/drm/i915/i915_reg.h         |  9 +++++++++
 drivers/gpu/drm/i915/intel_display.h    |  1 +
 drivers/gpu/drm/i915/intel_dp.c         |  8 ++++++++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++++++++
 6 files changed, 36 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index caebd5825279..53e401c792d0 100644
@@ -1255,6 +1255,7 @@ enum modeset_restore {
 #define DP_AUX_B 0x10
 #define DP_AUX_C 0x20
 #define DP_AUX_D 0x30
+#define DP_AUX_F 0x50
 
 #define DDC_PIN_B  0x05
 #define DDC_PIN_C  0x04
drivers/gpu/drm/i915/i915_irq.c +6 -0
index 3517c6548e2c..8b8df5b8b8a7 100644
@@ -2579,6 +2579,9 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
 					    GEN9_AUX_CHANNEL_C |
 					    GEN9_AUX_CHANNEL_D;
 
+			if (IS_CANNONLAKE(dev_priv))
+				tmp_mask |= CNL_AUX_CHANNEL_F;
+
 			if (iir & tmp_mask) {
 				dp_aux_irq_handler(dev_priv);
 				found = true;
@@ -3611,6 +3614,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 		de_pipe_masked |= GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
 	}
 
+	if (IS_CANNONLAKE(dev_priv))
+		de_port_masked |= CNL_AUX_CHANNEL_F;
+
 	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
 					   GEN8_PIPE_FIFO_UNDERRUN;
 
drivers/gpu/drm/i915/i915_reg.h +9 -0
index 966e4df9700e..21ebf5178169 100644
@@ -1312,6 +1312,7 @@ enum i915_power_well_id {
 	CNL_DISP_PW_AUX_B = GLK_DISP_PW_AUX_B,
 	CNL_DISP_PW_AUX_C = GLK_DISP_PW_AUX_C,
 	CNL_DISP_PW_AUX_D,
+	CNL_DISP_PW_AUX_F = 13,
 
 	SKL_DISP_PW_1 = 14,
 	SKL_DISP_PW_2,
@@ -5276,6 +5277,13 @@ enum {
 #define _DPD_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64320)
 #define _DPD_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64324)
 
+#define _DPF_AUX_CH_CTL		(dev_priv->info.display_mmio_offset + 0x64510)
+#define _DPF_AUX_CH_DATA1	(dev_priv->info.display_mmio_offset + 0x64514)
+#define _DPF_AUX_CH_DATA2	(dev_priv->info.display_mmio_offset + 0x64518)
+#define _DPF_AUX_CH_DATA3	(dev_priv->info.display_mmio_offset + 0x6451c)
+#define _DPF_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64520)
+#define _DPF_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64524)
+
 #define DP_AUX_CH_CTL(port)	_MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
 #define DP_AUX_CH_DATA(port, i)	_MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
 
@@ -6931,6 +6939,7 @@ enum {
 #define GEN8_DE_PORT_IMR _MMIO(0x44444)
 #define GEN8_DE_PORT_IIR _MMIO(0x44448)
 #define GEN8_DE_PORT_IER _MMIO(0x4444c)
+#define  CNL_AUX_CHANNEL_F		(1 << 28)
 #define  GEN9_AUX_CHANNEL_D		(1 << 27)
 #define  GEN9_AUX_CHANNEL_C		(1 << 26)
 #define  GEN9_AUX_CHANNEL_B		(1 << 25)
drivers/gpu/drm/i915/intel_display.h +1 -0
index e47638931b51..30fa2041a45f 100644
@@ -172,6 +172,7 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_AUX_B,
 	POWER_DOMAIN_AUX_C,
 	POWER_DOMAIN_AUX_D,
+	POWER_DOMAIN_AUX_F,
 	POWER_DOMAIN_GMBUS,
 	POWER_DOMAIN_MODESET,
 	POWER_DOMAIN_GT_IRQ,
drivers/gpu/drm/i915/intel_dp.c +8 -0
index 71721de39e6b..91e02a35c036 100644
@@ -1298,6 +1298,9 @@ static enum port intel_aux_port(struct drm_i915_private *dev_priv,
 	case DP_AUX_D:
 		aux_port = PORT_D;
 		break;
+	case DP_AUX_F:
+		aux_port = PORT_F;
+		break;
 	default:
 		MISSING_CASE(info->alternate_aux_channel);
 		aux_port = PORT_A;
@@ -1317,6 +1320,7 @@ static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1331,6 +1335,7 @@ static i915_reg_t g4x_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
@@ -5992,6 +5997,9 @@ intel_dp_init_connector_port_info(struct intel_digital_port *intel_dig_port)
 		/* FIXME: Check VBT for actual wiring of PORT E */
 		intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
 		break;
+	case PORT_F:
+		intel_dp->aux_power_domain = POWER_DOMAIN_AUX_F;
+		break;
 	default:
 		MISSING_CASE(encoder->port);
 	}
drivers/gpu/drm/i915/intel_runtime_pm.c +11 -0
index d758da6156a8..413e7fb7ef6e 100644
@@ -124,6 +124,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
 		return "AUX_C";
 	case POWER_DOMAIN_AUX_D:
 		return "AUX_D";
+	case POWER_DOMAIN_AUX_F:
+		return "AUX_F";
 	case POWER_DOMAIN_GMBUS:
 		return "GMBUS";
 	case POWER_DOMAIN_INIT:
@@ -1846,6 +1848,9 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
 #define CNL_DISPLAY_AUX_D_POWER_DOMAINS (		\
 	BIT_ULL(POWER_DOMAIN_AUX_D) |			\
 	BIT_ULL(POWER_DOMAIN_INIT))
+#define CNL_DISPLAY_AUX_F_POWER_DOMAINS (		\
+	BIT_ULL(POWER_DOMAIN_AUX_F) |			\
+	BIT_ULL(POWER_DOMAIN_INIT))
 #define CNL_DISPLAY_DC_OFF_POWER_DOMAINS (		\
 	CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
 	BIT_ULL(POWER_DOMAIN_MODESET) |			\
@@ -2395,6 +2400,12 @@ static struct i915_power_well cnl_power_wells[] = {
 		.ops = &hsw_power_well_ops,
 		.id = SKL_DISP_PW_DDI_D,
 	},
+	{
+		.name = "AUX F",
+		.domains = CNL_DISPLAY_AUX_F_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = CNL_DISP_PW_AUX_F,
+	},
 };
 
 static int
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

Re: [PATCH 03/11] drm/i915/cnl: Add AUX-F support

Quoted 43 lines · Rodrigo Vivi

On some Cannonlake SKUs we have a dedicated Aux for port F, that is only the full split between port A and port E.

There is still no Aux E for Port E, as in previous platforms, because port_E still means shared lanes with port A.

v2: Rebase.
v3: Add couple missed PORT_F cases on intel_dp.
v4: Rebase and fix commit message.
v5: Squash Imre's "drm/i915: Add missing AUX_F power well string"
v6: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
Cc Manasi Navare <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_irq.c         |  6 ++++++
 drivers/gpu/drm/i915/i915_reg.h         |  9 +++++++++
 drivers/gpu/drm/i915/intel_display.h    |  1 +
 drivers/gpu/drm/i915/intel_dp.c         |  8 ++++++++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++++++++
 6 files changed, 36 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index caebd5825279..53e401c792d0 100644
@@ -1255,6 +1255,7 @@ enum modeset_restore {
 #define DP_AUX_B 0x10
 #define DP_AUX_C 0x20
 #define DP_AUX_D 0x30
+#define DP_AUX_F 0x50
 
 #define DDC_PIN_B  0x05
 #define DDC_PIN_C  0x04
drivers/gpu/drm/i915/i915_irq.c +0 -0
index 3517c6548e2c..8b8df5b8b8a7 100644

drivers/gpu/drm/i915/i915_irq.c gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) · line 2583

Quoted 5 lines
drivers/gpu/drm/i915/i915_irq.c +2 -0
@@ -2579,6 +2579,9 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
 					    GEN9_AUX_CHANNEL_C |
 					    GEN9_AUX_CHANNEL_D;
 
+			if (IS_CANNONLAKE(dev_priv))
+				tmp_mask |= CNL_AUX_CHANNEL_F;

Do we need to care about this if the SKU does not have the port? The interrupt status bits are checked only if a platform has the corresponding port. I think CNL SKU's with/without port F should be treated similarly.

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#7 lore raw

Re: [PATCH 03/11] drm/i915/cnl: Add AUX-F support

Quoted 50 lines · Dhinakaran
Quoted 46 lines · Rodrigo Vivi

On some Cannonlake SKUs we have a dedicated Aux for port F, that is only the full split between port A and port E.

There is still no Aux E for Port E, as in previous platforms, because port_E still means shared lanes with port A.

v2: Rebase.
v3: Add couple missed PORT_F cases on intel_dp.
v4: Rebase and fix commit message.
v5: Squash Imre's "drm/i915: Add missing AUX_F power well string"
v6: Rebase on top of display headers rework.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
Cc Manasi Navare <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_irq.c         |  6 ++++++
 drivers/gpu/drm/i915/i915_reg.h         |  9 +++++++++
 drivers/gpu/drm/i915/intel_display.h    |  1 +
 drivers/gpu/drm/i915/intel_dp.c         |  8 ++++++++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++++++++
 6 files changed, 36 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index caebd5825279..53e401c792d0 100644
@@ -1255,6 +1255,7 @@ enum modeset_restore {
 #define DP_AUX_B 0x10
 #define DP_AUX_C 0x20
 #define DP_AUX_D 0x30
+#define DP_AUX_F 0x50
 
 #define DDC_PIN_B  0x05
 #define DDC_PIN_C  0x04
drivers/gpu/drm/i915/i915_irq.c +0 -0
index 3517c6548e2c..8b8df5b8b8a7 100644
@@ -2579,6 +2579,9 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
 					    GEN9_AUX_CHANNEL_C |
 					    GEN9_AUX_CHANNEL_D;
 
Quoted 7 lines

drivers/gpu/drm/i915/i915_irq.c gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) · line 2583

Quoted 2 lines
drivers/gpu/drm/i915/i915_irq.c +2 -0
+			if (IS_CANNONLAKE(dev_priv))
+				tmp_mask |= CNL_AUX_CHANNEL_F;

Do we need to care about this if the SKU does not have the port? The interrupt status bits are checked only if a platform has the corresponding port. I think CNL SKU's with/without port F should be treated similarly.

Good catch...
I guess I will have to re-order the patches here to make sure IS_CNL_WITH_PORT_F is already in place when this gets introduced.

Quoted 2 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#8 lore raw

PATCH 4/11 drm/i915/cnl: Fix _CNL_PORT_TX_DW2_LN0_F definition.

In reply to Rodrigo Vivi

This was wrong since its introduction on commit '04416108ccea ("drm/i915/cnl: Add registers related to voltage swing sequences.")'

But since no Port F was needed so far we don't need to propagate fixes back there.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +1 -1
index 21ebf5178169..7b209f33a81e 100644
@@ -1964,7 +1964,7 @@ enum i915_power_well_id {
 #define _CNL_PORT_TX_DW2_LN0_B		0x162648
 #define _CNL_PORT_TX_DW2_LN0_C		0x162C48
 #define _CNL_PORT_TX_DW2_LN0_D		0x162E48
-#define _CNL_PORT_TX_DW2_LN0_F		0x162A48
+#define _CNL_PORT_TX_DW2_LN0_F		0x162848
 #define CNL_PORT_TX_DW2_GRP(port)	_MMIO_PORT6(port, \
 						    _CNL_PORT_TX_DW2_GRP_AE, \
 						    _CNL_PORT_TX_DW2_GRP_B, \
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 4/11
#9 lore raw

Re: [PATCH 04/11] drm/i915/cnl: Fix _CNL_PORT_TX_DW2_LN0_F definition.

Quoted 6 lines · Rodrigo Vivi

This was wrong since its introduction on commit '04416108ccea ("drm/i915/cnl: Add registers related to voltage swing sequences.")'

But since no Port F was needed so far we don't need to propagate fixes back there.

Checked against the spec, fix looks correct.

Quoted 12 lines
Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 21ebf5178169..7b209f33a81e 100644

drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 1970

Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h +1 -1
@@ -1964,7 +1964,7 @@ enum i915_power_well_id {
 #define _CNL_PORT_TX_DW2_LN0_B		0x162648
 #define _CNL_PORT_TX_DW2_LN0_C		0x162C48
 #define _CNL_PORT_TX_DW2_LN0_D		0x162E48
-#define _CNL_PORT_TX_DW2_LN0_F		0x162A48
+#define _CNL_PORT_TX_DW2_LN0_F		0x162848
 #define CNL_PORT_TX_DW2_GRP(port)	_MMIO_PORT6(port, \
 						    _CNL_PORT_TX_DW2_GRP_AE, \
 						    _CNL_PORT_TX_DW2_GRP_B, \

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#10 lore raw

PATCH 5/11 drm/i915: Fix DPLCLKA_CFGCR0 bits for Port F.

In reply to Rodrigo Vivi

Since when it got introduced with commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' the support for Port F was wrong, because Port F bits are far from bits used for A to E.

Since Port F is not used so far we don't need to propagate Fixes back there.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -4
index 7b209f33a81e..12e3473168fe 100644
@@ -8668,10 +8668,14 @@ enum skl_power_gate {
  * CNL Clocks
  */
 #define DPCLKA_CFGCR0				_MMIO(0x6C200)
-#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port)+10))
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port)*2))
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port)*2)
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port) ==  PORT_F ? 23 : \
+						      (port)+10))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port) == PORT_F ? 21 : \
+						      (port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port) == PORT_F ? 21 : \
+						(port)*2)
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port) == PORT_F ? 21 : \
+							   (port)*2))
 
 /* CNL PLL */
 #define DPLL0_ENABLE		0x46010
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

Re: [PATCH 05/11] drm/i915: Fix DPLCLKA_CFGCR0 bits for Port F.

Quoted 25 lines · Rodrigo Vivi

Since when it got introduced with commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' the support for Port F was wrong, because Port F bits are far from bits used for A to E.

Since Port F is not used so far we don't need to propagate Fixes back there.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -2
index 7b209f33a81e..12e3473168fe 100644
@@ -8668,10 +8668,14 @@ enum skl_power_gate {
  * CNL Clocks
  */
 #define DPCLKA_CFGCR0				_MMIO(0x6C200)
-#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port)+10))
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port)*2))

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 8678

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +8 -2
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port)*2)
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port) ==  PORT_F ? 23 : \
+						      (port)+10))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port) == PORT_F ? 21 : \
+						      (port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port) == PORT_F ? 21 : \
+						(port)*2)
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port) == PORT_F ? 21 : \
+							   (port)*2))

How about
_MASK(port) = (3 << _SHIFT(port))
_SEL(pll, port) = ((pll) << _SHIFT(PORT)) ?

Keeps MASK and SEL definitions simpler in this specific case.

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 8681

Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 /* CNL PLL */
 #define DPLL0_ENABLE		0x46010

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#12 lore raw

Re: [PATCH 05/11] drm/i915: Fix DPLCLKA_CFGCR0 bits for Port F.

Quoted 44 lines · Dhinakaran
Quoted 25 lines · Rodrigo Vivi

Since when it got introduced with commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' the support for Port F was wrong, because Port F bits are far from bits used for A to E.

Since Port F is not used so far we don't need to propagate Fixes back there.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -2
index 7b209f33a81e..12e3473168fe 100644
@@ -8668,10 +8668,14 @@ enum skl_power_gate {
  * CNL Clocks
  */
 #define DPCLKA_CFGCR0				_MMIO(0x6C200)
-#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port)+10))
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port)*2))

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 8678

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +8 -2
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port)*2)
-#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_OFF(port)	(1 << ((port) ==  PORT_F ? 23 : \
+						      (port)+10))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << ((port) == PORT_F ? 21 : \
+						      (port)*2))
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port)	((port) == PORT_F ? 21 : \
+						(port)*2)
+#define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << ((port) == PORT_F ? 21 : \
+							   (port)*2))

How about
_MASK(port) = (3 << _SHIFT(port))
_SEL(pll, port) = ((pll) << _SHIFT(PORT)) ?

Quoted 1 line

Keeps MASK and SEL definitions simpler in this specific case.

I just didn't want to disrupt the current style nor wanted to define a new macro that is only used in one case. :/

But I will consider these options on the next version.

Thanks,
Rodrigo.

Quoted 6 lines

drivers/gpu/drm/i915/i915_reg.h enum skl_power_gate { · line 8681

Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 /* CNL PLL */
 #define DPLL0_ENABLE		0x46010

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#13 lore raw

PATCH 6/11 drm/i915/cnl: Add right GMBUS pin number for HDMI on Port F.

In reply to Rodrigo Vivi

On CNP Pin 3 is for misc of Port F usage depending on the configuration. For CNL that uses Port F, pin 3 is the one.

v2: Make it more generic and update commit message.

Cc Anusha Srivatsa <[email protected]>
Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/intel_hdmi.c +3 -0
index bced7b954d93..6f460c4534fa 100644
@@ -1924,6 +1924,9 @@ static u8 cnp_port_to_ddc_pin(struct drm_i915_private *dev_priv,
 	case PORT_D:
 		ddc_pin = GMBUS_PIN_4_CNP;
 		break;
+	case PORT_F:
+		ddc_pin = GMBUS_PIN_3_BXT;
+		break;
 	default:
 		MISSING_CASE(port);
 		ddc_pin = GMBUS_PIN_1_BXT;
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 6/11
#14 lore raw

Re: [PATCH 06/11] drm/i915/cnl: Add right GMBUS pin number for HDMI on Port F.

Em Sex, 2017-12-22 às 15:18 -0800, Rodrigo Vivi escreveu:

Quoted 4 lines

On CNP Pin 3 is for misc of Port F usage depending on the configuration. For CNL that uses Port F, pin 3 is the one.

v2: Make it more generic and update commit message.

Quoted 24 lines
Cc Anusha Srivatsa <[email protected]>
Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/intel_hdmi.c +3 -0
index bced7b954d93..6f460c4534fa 100644
@@ -1924,6 +1924,9 @@ static u8 cnp_port_to_ddc_pin(struct
 drm_i915_private *dev_priv,
 	case PORT_D:
 		ddc_pin = GMBUS_PIN_4_CNP;
 		break;
+	case PORT_F:
+		ddc_pin = GMBUS_PIN_3_BXT;
+		break;
 	default:
 		MISSING_CASE(port);
Quoted 1 line

ddc_pin = GMBUS_PIN_1_BXT;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#15 lore raw

PATCH 7/11 drm/i915: For HPD connected port use hpd_pin instead of port.

In reply to Rodrigo Vivi

Let's try to simplify this mapping to hpd_pin -> bit instead using port.
So for CNL with port F where we have this port using hdp_pin and bits of other ports we don't need to duplicated the mapping.

But for now this is only a re-org with no functional change expected.

---
 drivers/gpu/drm/i915/intel_dp.c     | 144 ++++++++++++++++++------------------
 drivers/gpu/drm/i915/intel_drv.h    |   3 +-
 drivers/gpu/drm/i915/intel_lspcon.c |   3 +-
 3 files changed, 72 insertions(+), 78 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +70 -74
index 91e02a35c036..6db0b6b25f61 100644
@@ -4462,173 +4462,170 @@ edp_detect(struct intel_dp *intel_dp)
 	return status;
 }
 
-static bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool ibx_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	switch (port->base.port) {
-	case PORT_B:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_B:
 		bit = SDE_PORTB_HOTPLUG;
 		break;
-	case PORT_C:
+	case HPD_PORT_C:
 		bit = SDE_PORTC_HOTPLUG;
 		break;
-	case PORT_D:
+	case HPD_PORT_D:
 		bit = SDE_PORTD_HOTPLUG;
 		break;
 	default:
-		MISSING_CASE(port->base.port);
+		MISSING_CASE(encoder->hpd_pin);
 		return false;
 	}
 
 	return I915_READ(SDEISR) & bit;
 }
 
-static bool cpt_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool cpt_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	switch (port->base.port) {
-	case PORT_B:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_B:
 		bit = SDE_PORTB_HOTPLUG_CPT;
 		break;
-	case PORT_C:
+	case HPD_PORT_C:
 		bit = SDE_PORTC_HOTPLUG_CPT;
 		break;
-	case PORT_D:
+	case HPD_PORT_D:
 		bit = SDE_PORTD_HOTPLUG_CPT;
 		break;
 	default:
-		MISSING_CASE(port->base.port);
+		MISSING_CASE(encoder->hpd_pin);
 		return false;
 	}
 
 	return I915_READ(SDEISR) & bit;
 }
 
-static bool spt_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool spt_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	switch (port->base.port) {
-	case PORT_A:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_A:
 		bit = SDE_PORTA_HOTPLUG_SPT;
 		break;
-	case PORT_E:
+	case HPD_PORT_E:
 		bit = SDE_PORTE_HOTPLUG_SPT;
 		break;
 	default:
-		return cpt_digital_port_connected(dev_priv, port);
+		return cpt_digital_port_connected(encoder);
 	}
 
 	return I915_READ(SDEISR) & bit;
 }
 
-static bool g4x_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool g4x_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	switch (port->base.port) {
-	case PORT_B:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_B:
 		bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
 		break;
-	case PORT_C:
+	case HPD_PORT_C:
 		bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
 		break;
-	case PORT_D:
+	case HPD_PORT_D:
 		bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
 		break;
 	default:
-		MISSING_CASE(port->base.port);
+		MISSING_CASE(encoder->hpd_pin);
 		return false;
 	}
 
 	return I915_READ(PORT_HOTPLUG_STAT) & bit;
 }
 
-static bool gm45_digital_port_connected(struct drm_i915_private *dev_priv,
-					struct intel_digital_port *port)
+static bool gm45_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	switch (port->base.port) {
-	case PORT_B:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_B:
 		bit = PORTB_HOTPLUG_LIVE_STATUS_GM45;
 		break;
-	case PORT_C:
+	case HPD_PORT_C:
 		bit = PORTC_HOTPLUG_LIVE_STATUS_GM45;
 		break;
-	case PORT_D:
+	case HPD_PORT_D:
 		bit = PORTD_HOTPLUG_LIVE_STATUS_GM45;
 		break;
 	default:
-		MISSING_CASE(port->base.port);
+		MISSING_CASE(encoder->hpd_pin);
 		return false;
 	}
 
 	return I915_READ(PORT_HOTPLUG_STAT) & bit;
 }
 
-static bool ilk_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool ilk_digital_port_connected(struct intel_encoder *encoder)
 {
-	if (port->base.port == PORT_A)
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	if (encoder->hpd_pin == HPD_PORT_A)
 		return I915_READ(DEISR) & DE_DP_A_HOTPLUG;
 	else
-		return ibx_digital_port_connected(dev_priv, port);
+		return ibx_digital_port_connected(encoder);
 }
 
-static bool snb_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool snb_digital_port_connected(struct intel_encoder *encoder)
 {
-	if (port->base.port == PORT_A)
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	if (encoder->hpd_pin == HPD_PORT_A)
 		return I915_READ(DEISR) & DE_DP_A_HOTPLUG;
 	else
-		return cpt_digital_port_connected(dev_priv, port);
+		return cpt_digital_port_connected(encoder);
 }
 
-static bool ivb_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool ivb_digital_port_connected(struct intel_encoder *encoder)
 {
-	if (port->base.port == PORT_A)
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	if (encoder->hpd_pin == HPD_PORT_A)
 		return I915_READ(DEISR) & DE_DP_A_HOTPLUG_IVB;
 	else
-		return cpt_digital_port_connected(dev_priv, port);
+		return cpt_digital_port_connected(encoder);
 }
 
-static bool bdw_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *port)
+static bool bdw_digital_port_connected(struct intel_encoder *encoder)
 {
-	if (port->base.port == PORT_A)
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	if (encoder->hpd_pin == HPD_PORT_A)
 		return I915_READ(GEN8_DE_PORT_ISR) & GEN8_PORT_DP_A_HOTPLUG;
 	else
-		return cpt_digital_port_connected(dev_priv, port);
+		return cpt_digital_port_connected(encoder);
 }
 
-static bool bxt_digital_port_connected(struct drm_i915_private *dev_priv,
-				       struct intel_digital_port *intel_dig_port)
+static bool bxt_digital_port_connected(struct intel_encoder *encoder)
 {
-	struct intel_encoder *intel_encoder = &intel_dig_port->base;
-	enum port port;
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 bit;
 
-	port = intel_hpd_pin_to_port(intel_encoder->hpd_pin);
-	switch (port) {
-	case PORT_A:
+	switch (encoder->hpd_pin) {
+	case HPD_PORT_A:
 		bit = BXT_DE_PORT_HP_DDIA;
 		break;
-	case PORT_B:
+	case HPD_PORT_B:
 		bit = BXT_DE_PORT_HP_DDIB;
 		break;
-	case PORT_C:
+	case HPD_PORT_C:
 		bit = BXT_DE_PORT_HP_DDIC;
 		break;
 	default:
-		MISSING_CASE(port);
+		MISSING_CASE(encoder->hpd_pin);
 		return false;
 	}
 
@@ -4637,33 +4634,33 @@ static bool bxt_digital_port_connected(struct drm_i915_private *dev_priv,
 
 /*
  * intel_digital_port_connected - is the specified port connected?
- * @dev_priv: i915 private structure
- * @port: the port to test
+ * @encoder: intel_encoder
  *
  * Return %true if @port is connected, %false otherwise.
  */
-bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
-				  struct intel_digital_port *port)
+bool intel_digital_port_connected(struct intel_encoder *encoder)
 {
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
 	if (HAS_GMCH_DISPLAY(dev_priv)) {
 		if (IS_GM45(dev_priv))
-			return gm45_digital_port_connected(dev_priv, port);
+			return gm45_digital_port_connected(encoder);
 		else
-			return g4x_digital_port_connected(dev_priv, port);
+			return g4x_digital_port_connected(encoder);
 	}
 
 	if (IS_GEN5(dev_priv))
-		return ilk_digital_port_connected(dev_priv, port);
+		return ilk_digital_port_connected(encoder);
 	else if (IS_GEN6(dev_priv))
-		return snb_digital_port_connected(dev_priv, port);
+		return snb_digital_port_connected(encoder);
 	else if (IS_GEN7(dev_priv))
-		return ivb_digital_port_connected(dev_priv, port);
+		return ivb_digital_port_connected(encoder);
 	else if (IS_GEN8(dev_priv))
-		return bdw_digital_port_connected(dev_priv, port);
+		return bdw_digital_port_connected(encoder);
 	else if (IS_GEN9_LP(dev_priv))
-		return bxt_digital_port_connected(dev_priv, port);
+		return bxt_digital_port_connected(encoder);
 	else
-		return spt_digital_port_connected(dev_priv, port);
+		return spt_digital_port_connected(encoder);
 }
 
 static struct edid *
@@ -4722,8 +4719,7 @@ intel_dp_long_pulse(struct intel_connector *connector)
 	/* Can't disconnect eDP, but you can close the lid... */
 	if (intel_dp_is_edp(intel_dp))
 		status = edp_detect(intel_dp);
-	else if (intel_digital_port_connected(dev_priv,
-					      dp_to_dig_port(intel_dp)))
+	else if (intel_digital_port_connected(&dp_to_dig_port(intel_dp)->base))
 		status = intel_dp_detect_dpcd(intel_dp);
 	else
 		status = connector_status_disconnected;
drivers/gpu/drm/i915/intel_drv.h +1 -2
index 30f791f89d64..2d21a54a504b 100644
@@ -1590,8 +1590,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
 bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
 int intel_dp_link_required(int pixel_clock, int bpp);
 int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
-bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
-				  struct intel_digital_port *port);
+bool intel_digital_port_connected(struct intel_encoder *encoder);
 
 /* intel_dp_aux_backlight.c */
 int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
drivers/gpu/drm/i915/intel_lspcon.c +1 -2
index dcbc786479f9..8ae8f42f430a 100644
@@ -167,11 +167,10 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 {
 	struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon);
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	unsigned long start = jiffies;
 
 	while (1) {
-		if (intel_digital_port_connected(dev_priv, dig_port)) {
+		if (intel_digital_port_connected(&dig_port->base)) {
 			DRM_DEBUG_KMS("LSPCON recovering in PCON mode after %u ms\n",
 				      jiffies_to_msecs(jiffies - start));
 			return;
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#16 lore raw

PATCH 8/11 drm/i915/cnl: Add HPD support for Port F.

In reply to Rodrigo Vivi

On CNP boards that are using DDI F,
bit 25 (SDE_PORTE_HOTPLUG_SPT) is representing the Digital Port F hotplug line when the Digital Port F hotplug detect input is enabled.

v2: Reuse all existent structure instead of adding a new HPD_PORT_F pointing to pin of port E.
v3: Use IS_CNL_WITH_PORT_F so we can start upstreaming
this right now. If that SKU ever get a proper name we come back and update it.
v4: Rebase on top of digital connected port using encoder
instead of port.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
Cc Dhinakaran Pandiyan <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h      |  8 ++++++--
 drivers/gpu/drm/i915/i915_irq.c      | 35 +++++++++++++++++++----------------
 drivers/gpu/drm/i915/intel_dp.c      |  4 +++-
 drivers/gpu/drm/i915/intel_hdmi.c    |  2 +-
 drivers/gpu/drm/i915/intel_hotplug.c | 19 +++++++++++++++----
 5 files changed, 44 insertions(+), 24 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +6 -2
index 53e401c792d0..df741d87db72 100644
@@ -2647,6 +2647,8 @@ intel_info(const struct drm_i915_private *dev_priv)
 				 (dev_priv)->info.gt == 2)
 #define IS_CFL_GT3(dev_priv)	(IS_COFFEELAKE(dev_priv) && \
 				 (dev_priv)->info.gt == 3)
+#define IS_CNL_WITH_PORT_F(dev_priv)	(IS_CANNONLAKE(dev_priv) && \
+				 (INTEL_DEVID(dev_priv) & 0x0004) == 0x0004)
 
 #define IS_ALPHA_SUPPORT(intel_info) ((intel_info)->is_alpha_support)
 
@@ -2951,8 +2953,10 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
 void intel_hpd_init(struct drm_i915_private *dev_priv);
 void intel_hpd_init_work(struct drm_i915_private *dev_priv);
 void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
-enum port intel_hpd_pin_to_port(enum hpd_pin pin);
-enum hpd_pin intel_hpd_pin(enum port port);
+enum port intel_hpd_pin_to_port(struct drm_i915_private *dev_priv,
+				enum hpd_pin pin);
+enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
+				   enum port port);
 bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
 void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
 
drivers/gpu/drm/i915/i915_irq.c +19 -16
index 8b8df5b8b8a7..98951eca0367 100644
@@ -1568,10 +1568,11 @@ static bool i9xx_port_hotplug_long_detect(enum port port, u32 val)
  *
  * Note that the caller is expected to zero out the masks initially.
  */
-static void intel_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
-			     u32 hotplug_trigger, u32 dig_hotplug_reg,
-			     const u32 hpd[HPD_NUM_PINS],
-			     bool long_pulse_detect(enum port port, u32 val))
+static void intel_get_hpd_pins(struct drm_i915_private *dev_priv,
+			       u32 *pin_mask, u32 *long_mask,
+			       u32 hotplug_trigger, u32 dig_hotplug_reg,
+			       const u32 hpd[HPD_NUM_PINS],
+			       bool long_pulse_detect(enum port port, u32 val))
 {
 	enum port port;
 	int i;
@@ -1582,7 +1583,7 @@ static void intel_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
 
 		*pin_mask |= BIT(i);
 
-		port = intel_hpd_pin_to_port(i);
+		port = intel_hpd_pin_to_port(dev_priv, i);
 		if (port == PORT_NONE)
 			continue;
 
@@ -1970,8 +1971,9 @@ static void i9xx_hpd_irq_handler(struct drm_i915_private *dev_priv,
 		u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
 
 		if (hotplug_trigger) {
-			intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
-					   hotplug_trigger, hpd_status_g4x,
+			intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
+					   hotplug_trigger, hotplug_trigger,
+					   hpd_status_g4x,
 					   i9xx_port_hotplug_long_detect);
 
 			intel_hpd_irq_handler(dev_priv, pin_mask, long_mask);
@@ -1983,8 +1985,9 @@ static void i9xx_hpd_irq_handler(struct drm_i915_private *dev_priv,
 		u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
 
 		if (hotplug_trigger) {
-			intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
-					   hotplug_trigger, hpd_status_i915,
+			intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
+					   hotplug_trigger, hotplug_trigger,
+					   hpd_status_i915,
 					   i9xx_port_hotplug_long_detect);
 			intel_hpd_irq_handler(dev_priv, pin_mask, long_mask);
 		}
@@ -2185,7 +2188,7 @@ static void ibx_hpd_irq_handler(struct drm_i915_private *dev_priv,
 	if (!hotplug_trigger)
 		return;
 
-	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+	intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
 			   pch_port_hotplug_long_detect);
 
@@ -2327,8 +2330,8 @@ static void spt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
 		dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
 		I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
 
-		intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
-				   dig_hotplug_reg, hpd_spt,
+		intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
+				   hotplug_trigger, dig_hotplug_reg, hpd_spt,
 				   spt_port_hotplug_long_detect);
 	}
 
@@ -2338,8 +2341,8 @@ static void spt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
 		dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG2);
 		I915_WRITE(PCH_PORT_HOTPLUG2, dig_hotplug_reg);
 
-		intel_get_hpd_pins(&pin_mask, &long_mask, hotplug2_trigger,
-				   dig_hotplug_reg, hpd_spt,
+		intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
+				   hotplug2_trigger, dig_hotplug_reg, hpd_spt,
 				   spt_port_hotplug2_long_detect);
 	}
 
@@ -2359,7 +2362,7 @@ static void ilk_hpd_irq_handler(struct drm_i915_private *dev_priv,
 	dig_hotplug_reg = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL);
 	I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, dig_hotplug_reg);
 
-	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+	intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
 			   ilk_port_hotplug_long_detect);
 
@@ -2536,7 +2539,7 @@ static void bxt_hpd_irq_handler(struct drm_i915_private *dev_priv,
 	dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
 	I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
 
-	intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+	intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, hotplug_trigger,
 			   dig_hotplug_reg, hpd,
 			   bxt_port_hotplug_long_detect);
 
drivers/gpu/drm/i915/intel_dp.c +3 -1
index 6db0b6b25f61..377a9770bae5 100644
@@ -5973,8 +5973,10 @@ intel_dp_init_connector_port_info(struct intel_digital_port *intel_dig_port)
 {
 	struct intel_encoder *encoder = &intel_dig_port->base;
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
+	struct intel_encoder *intel_encoder = &intel_dig_port->base;
+	struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
 
-	encoder->hpd_pin = intel_hpd_pin(encoder->port);
+	encoder->hpd_pin = intel_hpd_pin_default(dev_priv, encoder->port);
 
 	switch (encoder->port) {
 	case PORT_A:
drivers/gpu/drm/i915/intel_hdmi.c +1 -1
index 6f460c4534fa..cc76938cafc2 100644
@@ -2047,7 +2047,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 
 	if (WARN_ON(port == PORT_A))
 		return;
-	intel_encoder->hpd_pin = intel_hpd_pin(port);
+	intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
 
 	if (HAS_DDI(dev_priv))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
drivers/gpu/drm/i915/intel_hotplug.c +15 -4
index 875d5d218d5c..fe28c1ea84a5 100644
@@ -78,12 +78,14 @@
 
 /**
  * intel_hpd_port - return port hard associated with certain pin.
+ * @dev_priv: private driver data pointer
  * @pin: the hpd pin to get associated port
  *
  * Return port that is associatade with @pin and PORT_NONE if no port is
  * hard associated with that @pin.
  */
-enum port intel_hpd_pin_to_port(enum hpd_pin pin)
+enum port intel_hpd_pin_to_port(struct drm_i915_private *dev_priv,
+				enum hpd_pin pin)
 {
 	switch (pin) {
 	case HPD_PORT_A:
@@ -95,6 +97,8 @@ enum port intel_hpd_pin_to_port(enum hpd_pin pin)
 	case HPD_PORT_D:
 		return PORT_D;
 	case HPD_PORT_E:
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			return PORT_F;
 		return PORT_E;
 	default:
 		return PORT_NONE; /* no port for this pin */
@@ -102,13 +106,17 @@ enum port intel_hpd_pin_to_port(enum hpd_pin pin)
 }
 
 /**
- * intel_hpd_pin - return pin hard associated with certain port.
+ * intel_hpd_pin_default - return default pin associated with certain port.
+ * @dev_priv: private driver data pointer
  * @port: the hpd port to get associated pin
  *
+ * It is only valid and used by digital port encoder.
+ *
  * Return pin that is associatade with @port and HDP_NONE if no pin is
  * hard associated with that @port.
  */
-enum hpd_pin intel_hpd_pin(enum port port)
+enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
+				   enum port port)
 {
 	switch (port) {
 	case PORT_A:
@@ -121,6 +129,9 @@ enum hpd_pin intel_hpd_pin(enum port port)
 		return HPD_PORT_D;
 	case PORT_E:
 		return HPD_PORT_E;
+	case PORT_F:
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			return HPD_PORT_E;
 	default:
 		MISSING_CASE(port);
 		return HPD_NONE;
@@ -417,7 +428,7 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
 		if (!(BIT(i) & pin_mask))
 			continue;
 
-		port = intel_hpd_pin_to_port(i);
+		port = intel_hpd_pin_to_port(dev_priv, i);
 		is_dig_port = port != PORT_NONE &&
 			dev_priv->hotplug.irq_port[port];
 
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#17 lore raw

PATCH 9/11 drm/i915/cnl: Enable DDI-F on Cannonlake.

In reply to Rodrigo Vivi

Now let's finish the Port-F support by adding the proper port F detection, irq and power well support.

v2: Rebase
v3: Use BIT_ULL
v4: Cover missed case on ddi init.
v5: Update commit message.
v6: Rebase on top of display headers rework.

Cc Manasi Navare <[email protected]>
Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h         |  2 ++
 drivers/gpu/drm/i915/intel_ddi.c        |  4 ++++
 drivers/gpu/drm/i915/intel_display.c    |  6 +++++-
 drivers/gpu/drm/i915/intel_display.h    |  2 ++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 13 +++++++++++++
 5 files changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 12e3473168fe..6e931c3dae94 100644
@@ -1304,6 +1304,7 @@ enum i915_power_well_id {
 	SKL_DISP_PW_DDI_B,
 	SKL_DISP_PW_DDI_C,
 	SKL_DISP_PW_DDI_D,
+	CNL_DISP_PW_DDI_F = 6,
 
 	GLK_DISP_PW_AUX_A = 8,
 	GLK_DISP_PW_AUX_B,
@@ -8771,6 +8772,7 @@ enum skl_power_gate {
 #define  SFUSE_STRAP_RAW_FREQUENCY	(1<<8)
 #define  SFUSE_STRAP_DISPLAY_DISABLED	(1<<7)
 #define  SFUSE_STRAP_CRT_DISABLED	(1<<6)
+#define  SFUSE_STRAP_DDIF_DETECTED	(1<<3)
 #define  SFUSE_STRAP_DDIB_DETECTED	(1<<2)
 #define  SFUSE_STRAP_DDIC_DETECTED	(1<<1)
 #define  SFUSE_STRAP_DDID_DETECTED	(1<<0)
drivers/gpu/drm/i915/intel_ddi.c +4 -0
index f51645a08dca..5944592536a1 100644
@@ -2868,6 +2868,10 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 		intel_dig_port->ddi_io_power_domain =
 			POWER_DOMAIN_PORT_DDI_E_IO;
 		break;
+	case PORT_F:
+		intel_dig_port->ddi_io_power_domain =
+			POWER_DOMAIN_PORT_DDI_F_IO;
+		break;
 	default:
 		MISSING_CASE(port);
 	}
drivers/gpu/drm/i915/intel_display.c +5 -1
index 0cd355978ab4..4ed3c5a5ec21 100644
@@ -5641,6 +5641,8 @@ enum intel_display_power_domain intel_port_to_power_domain(enum port port)
 		return POWER_DOMAIN_PORT_DDI_D_LANES;
 	case PORT_E:
 		return POWER_DOMAIN_PORT_DDI_E_LANES;
+	case PORT_F:
+		return POWER_DOMAIN_PORT_DDI_F_LANES;
 	default:
 		MISSING_CASE(port);
 		return POWER_DOMAIN_PORT_OTHER;
@@ -13597,7 +13599,7 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 		if (found || IS_GEN9_BC(dev_priv))
 			intel_ddi_init(dev_priv, PORT_A);
 
-		/* DDI B, C and D detection is indicated by the SFUSE_STRAP
+		/* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
 		 * register */
 		found = I915_READ(SFUSE_STRAP);
 
@@ -13607,6 +13609,8 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 			intel_ddi_init(dev_priv, PORT_C);
 		if (found & SFUSE_STRAP_DDID_DETECTED)
 			intel_ddi_init(dev_priv, PORT_D);
+		if (found & SFUSE_STRAP_DDIF_DETECTED)
+			intel_ddi_init(dev_priv, PORT_F);
 		/*
 		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
 		 */
drivers/gpu/drm/i915/intel_display.h +2 -0
index 30fa2041a45f..c4042e342f50 100644
@@ -157,11 +157,13 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_DDI_C_LANES,
 	POWER_DOMAIN_PORT_DDI_D_LANES,
 	POWER_DOMAIN_PORT_DDI_E_LANES,
+	POWER_DOMAIN_PORT_DDI_F_LANES,
 	POWER_DOMAIN_PORT_DDI_A_IO,
 	POWER_DOMAIN_PORT_DDI_B_IO,
 	POWER_DOMAIN_PORT_DDI_C_IO,
 	POWER_DOMAIN_PORT_DDI_D_IO,
 	POWER_DOMAIN_PORT_DDI_E_IO,
+	POWER_DOMAIN_PORT_DDI_F_IO,
 	POWER_DOMAIN_PORT_DSI,
 	POWER_DOMAIN_PORT_CRT,
 	POWER_DOMAIN_PORT_OTHER,
drivers/gpu/drm/i915/intel_runtime_pm.c +13 -0
index 413e7fb7ef6e..461c0759e2c4 100644
@@ -94,6 +94,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
 		return "PORT_DDI_D_LANES";
 	case POWER_DOMAIN_PORT_DDI_E_LANES:
 		return "PORT_DDI_E_LANES";
+	case POWER_DOMAIN_PORT_DDI_F_LANES:
+		return "PORT_DDI_F_LANES";
 	case POWER_DOMAIN_PORT_DDI_A_IO:
 		return "PORT_DDI_A_IO";
 	case POWER_DOMAIN_PORT_DDI_B_IO:
@@ -104,6 +106,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
 		return "PORT_DDI_D_IO";
 	case POWER_DOMAIN_PORT_DDI_E_IO:
 		return "PORT_DDI_E_IO";
+	case POWER_DOMAIN_PORT_DDI_F_IO:
+		return "PORT_DDI_F_IO";
 	case POWER_DOMAIN_PORT_DSI:
 		return "PORT_DSI";
 	case POWER_DOMAIN_PORT_CRT:
@@ -1851,6 +1855,9 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
 #define CNL_DISPLAY_AUX_F_POWER_DOMAINS (		\
 	BIT_ULL(POWER_DOMAIN_AUX_F) |			\
 	BIT_ULL(POWER_DOMAIN_INIT))
+#define CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS (		\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_F_IO) |		\
+	BIT_ULL(POWER_DOMAIN_INIT))
 #define CNL_DISPLAY_DC_OFF_POWER_DOMAINS (		\
 	CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
 	BIT_ULL(POWER_DOMAIN_MODESET) |			\
@@ -2401,6 +2408,12 @@ static struct i915_power_well cnl_power_wells[] = {
 		.id = SKL_DISP_PW_DDI_D,
 	},
 	{
+		.name = "DDI F IO power well",
+		.domains = CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = CNL_DISP_PW_DDI_F,
+	},
+	{
 		.name = "AUX F",
 		.domains = CNL_DISPLAY_AUX_F_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#18 lore raw

PATCH 10/11 drm/i915/cnl: Fix DP max rate for Cannonlake with port F.

In reply to Rodrigo Vivi

On CNL SKUs that uses port F, max DP rate is 8.1G for all ports when we have the elevated voltage.

v2: Make commit message more generic.

Cc Lucas De Marchi <[email protected]>
Cc Manasi Navare <[email protected]>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -2
index 377a9770bae5..1b80a0ac4fd9 100644
@@ -238,8 +238,9 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
 		source_rates = cnl_rates;
 		size = ARRAY_SIZE(cnl_rates);
 		voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
-		if (port == PORT_A || port == PORT_D ||
-		    voltage == VOLTAGE_INFO_0_85V)
+		if (voltage == VOLTAGE_INFO_0_85V ||
+		    (!IS_CNL_WITH_PORT_F(dev_priv) && (port == PORT_A ||
+						       port == PORT_D)))
 			size -= 2;
 	} else if (IS_GEN9_BC(dev_priv)) {
 		source_rates = skl_rates;
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#19 lore raw

PATCH 11/11 drm/i915/cnl: Don't try to manage Port F power wells on all CNL.

In reply to Rodrigo Vivi

SKUs that lacks on the full port F split will just time out when touching this power well bits, causing a noisy warn.

This macro style is a deviation from the original definition in use for other platforms, but it at least avoid code duplication. Other smart alternatives like providing a joint list was also considered but it would require some extra memory handling that would be a deviation from the original simplistic definitions here anyways, plus requiring extra tests and possibly creating some corner cases for one single platform. So let's move with the simplest and safest approach.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 177 +++++++++++++++++---------------
 1 file changed, 94 insertions(+), 83 deletions(-)
drivers/gpu/drm/i915/intel_runtime_pm.c +94 -83
index 461c0759e2c4..a6199c6a2005 100644
@@ -2324,89 +2324,96 @@ static struct i915_power_well glk_power_wells[] = {
 	},
 };
 
+#define basic_cnl_power_wells						\
+	{								\
+		.name = "always-on",					\
+		.always_on = 1,						\
+		.domains = POWER_DOMAIN_MASK,				\
+		.ops = &i9xx_always_on_power_well_ops,			\
+		.id = I915_DISP_PW_ALWAYS_ON,				\
+	},								\
+	{								\
+		.name = "power well 1",					\
+		/* Handled by the DMC firmware */			\
+		.domains = 0,						\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_1,					\
+		{							\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "AUX A",					\
+		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_A,				\
+	},								\
+	{								\
+		.name = "AUX B",					\
+		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_B,				\
+	},								\
+	{								\
+		.name = "AUX C",					\
+		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_C,				\
+	},								\
+	{								\
+		.name = "AUX D",					\
+		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_D,				\
+		},							\
+	{								\
+		.name = "DC off",					\
+		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,		\
+		.ops = &gen9_dc_off_power_well_ops,			\
+		.id = SKL_DISP_PW_DC_OFF,				\
+	},								\
+	{								\
+		.name = "power well 2",					\
+		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,	\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_2,					\
+		{							\
+			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),	\
+			.hsw.has_vga = true,				\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "DDI A IO power well",				\
+		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_DDI_A,				\
+	},								\
+	{								\
+		.name = "DDI B IO power well",				\
+		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_B,				\
+	},								\
+	{								\
+		.name = "DDI C IO power well",				\
+		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_C,				\
+	},								\
+	{								\
+		.name = "DDI D IO power well",				\
+		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_D,				\
+	}
+
 static struct i915_power_well cnl_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = POWER_DOMAIN_MASK,
-		.ops = &i9xx_always_on_power_well_ops,
-		.id = I915_DISP_PW_ALWAYS_ON,
-	},
-	{
-		.name = "power well 1",
-		/* Handled by the DMC firmware */
-		.domains = 0,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_1,
-		{
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "AUX A",
-		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_A,
-	},
-	{
-		.name = "AUX B",
-		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_B,
-	},
-	{
-		.name = "AUX C",
-		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_C,
-	},
-	{
-		.name = "AUX D",
-		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_D,
-	},
-	{
-		.name = "DC off",
-		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,
-		.ops = &gen9_dc_off_power_well_ops,
-		.id = SKL_DISP_PW_DC_OFF,
-	},
-	{
-		.name = "power well 2",
-		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_2,
-		{
-			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
-			.hsw.has_vga = true,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "DDI A IO power well",
-		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_DDI_A,
-	},
-	{
-		.name = "DDI B IO power well",
-		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_B,
-	},
-	{
-		.name = "DDI C IO power well",
-		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_C,
-	},
-	{
-		.name = "DDI D IO power well",
-		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_D,
-	},
+	basic_cnl_power_wells,
+};
+
+static struct i915_power_well cnl_power_wells_with_port_f[] = {
+	basic_cnl_power_wells,
 	{
 		.name = "DDI F IO power well",
 		.domains = CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS,
@@ -2533,7 +2540,11 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	} else if (IS_GEN9_BC(dev_priv)) {
 		set_power_wells(power_domains, skl_power_wells);
 	} else if (IS_CANNONLAKE(dev_priv)) {
-		set_power_wells(power_domains, cnl_power_wells);
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			set_power_wells(power_domains,
+					cnl_power_wells_with_port_f);
+		else
+			set_power_wells(power_domains, cnl_power_wells);
 	} else if (IS_BROXTON(dev_priv)) {
 		set_power_wells(power_domains, bxt_power_wells);
 	} else if (IS_GEMINILAKE(dev_priv)) {
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#20 lore raw

Re: [PATCH 11/11] drm/i915/cnl: Don't try to manage Port F power wells on all CNL.

Quoted 2 lines · Rodrigo Vivi

SKUs that lacks on the full port F split will just time out when touching this power well bits, causing a noisy warn.

Shouldn't be this be squashed with [PATCH 09/11] in that case? Why introduce a WARN and then fix it.

Quoted 203 lines

This macro style is a deviation from the original definition in use for other platforms, but it at least avoid code duplication. Other smart alternatives like providing a joint list was also considered but it would require some extra memory handling that would be a deviation from the original simplistic definitions here anyways, plus requiring extra tests and possibly creating some corner cases for one single platform. So let's move with the simplest and safest approach.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 177 +++++++++++++++++---------------
 1 file changed, 94 insertions(+), 83 deletions(-)
drivers/gpu/drm/i915/intel_runtime_pm.c +89 -82
index 461c0759e2c4..a6199c6a2005 100644
@@ -2324,89 +2324,96 @@ static struct i915_power_well glk_power_wells[] = {
 	},
 };
 
+#define basic_cnl_power_wells						\
+	{								\
+		.name = "always-on",					\
+		.always_on = 1,						\
+		.domains = POWER_DOMAIN_MASK,				\
+		.ops = &i9xx_always_on_power_well_ops,			\
+		.id = I915_DISP_PW_ALWAYS_ON,				\
+	},								\
+	{								\
+		.name = "power well 1",					\
+		/* Handled by the DMC firmware */			\
+		.domains = 0,						\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_1,					\
+		{							\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "AUX A",					\
+		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_A,				\
+	},								\
+	{								\
+		.name = "AUX B",					\
+		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_B,				\
+	},								\
+	{								\
+		.name = "AUX C",					\
+		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_C,				\
+	},								\
+	{								\
+		.name = "AUX D",					\
+		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_D,				\
+		},							\
+	{								\
+		.name = "DC off",					\
+		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,		\
+		.ops = &gen9_dc_off_power_well_ops,			\
+		.id = SKL_DISP_PW_DC_OFF,				\
+	},								\
+	{								\
+		.name = "power well 2",					\
+		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,	\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_2,					\
+		{							\
+			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),	\
+			.hsw.has_vga = true,				\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "DDI A IO power well",				\
+		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_DDI_A,				\
+	},								\
+	{								\
+		.name = "DDI B IO power well",				\
+		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_B,				\
+	},								\
+	{								\
+		.name = "DDI C IO power well",				\
+		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_C,				\
+	},								\
+	{								\
+		.name = "DDI D IO power well",				\
+		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_D,				\
+	}
+
 static struct i915_power_well cnl_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = POWER_DOMAIN_MASK,
-		.ops = &i9xx_always_on_power_well_ops,
-		.id = I915_DISP_PW_ALWAYS_ON,
-	},
-	{
-		.name = "power well 1",
-		/* Handled by the DMC firmware */
-		.domains = 0,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_1,
-		{
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "AUX A",
-		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_A,
-	},
-	{
-		.name = "AUX B",
-		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_B,
-	},
-	{
-		.name = "AUX C",
-		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_C,
-	},
-	{
-		.name = "AUX D",
-		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_D,
-	},
-	{
-		.name = "DC off",
-		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,
-		.ops = &gen9_dc_off_power_well_ops,
-		.id = SKL_DISP_PW_DC_OFF,
-	},
-	{
-		.name = "power well 2",
-		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_2,
-		{
-			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
-			.hsw.has_vga = true,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "DDI A IO power well",
-		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_DDI_A,
-	},
-	{
-		.name = "DDI B IO power well",
-		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_B,
-	},
-	{
-		.name = "DDI C IO power well",
-		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_C,
-	},
-	{
-		.name = "DDI D IO power well",
-		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_D,
-	},
+	basic_cnl_power_wells,
+};
+
+static struct i915_power_well cnl_power_wells_with_port_f[] = {
+	basic_cnl_power_wells,
 	{
 		.name = "DDI F IO power well",
 		.domains = CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS,
@@ -2533,7 +2540,11 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	} else if (IS_GEN9_BC(dev_priv)) {
 		set_power_wells(power_domains, skl_power_wells);

drivers/gpu/drm/i915/intel_runtime_pm.c int intel_power_domains_init(struct drm_i915_private *dev_priv) · line 2550

Quoted 10 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +5 -1
 	} else if (IS_CANNONLAKE(dev_priv)) {
-		set_power_wells(power_domains, cnl_power_wells);
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			set_power_wells(power_domains,
+					cnl_power_wells_with_port_f);
+		else
+			set_power_wells(power_domains, cnl_power_wells);
 	} else if (IS_BROXTON(dev_priv)) {
 		set_power_wells(power_domains, bxt_power_wells);
 	} else if (IS_GEMINILAKE(dev_priv)) {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#21 lore raw

Re: [PATCH 11/11] drm/i915/cnl: Don't try to manage Port F power wells on all CNL.

Quoted 8 lines · Dhinakaran
Quoted 2 lines · Rodrigo Vivi

SKUs that lacks on the full port F split will just time out when touching this power well bits, causing a noisy warn.

Shouldn't be this be squashed with [PATCH 09/11] in that case?

Actually on patch 03/11 (drm/i915/cnl: Add AUX-F support)

Quoted 2 lines

Why
introduce a WARN and then fix it.

Good question. It will then just be a very ugly big patch with this change on it. But since you saw separated already you know what it is about and it wont be so bad for review ;)

But besides trying to make review easier I was just lazy because I noticed the WARN latter and I was trying different attempts here with joint lists and other approaches and this was the one I sent when I gave up and just had time to wrap up to send before christmas break.

Quoted 207 lines
Quoted 207 lines

This macro style is a deviation from the original definition in use for other platforms, but it at least avoid code duplication. Other smart alternatives like providing a joint list was also considered but it would require some extra memory handling that would be a deviation from the original simplistic definitions here anyways, plus requiring extra tests and possibly creating some corner cases for one single platform. So let's move with the simplest and safest approach.

Cc Lucas De Marchi <[email protected]>
Cc Imre Deak <[email protected]>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 177 +++++++++++++++++---------------
 1 file changed, 94 insertions(+), 83 deletions(-)
drivers/gpu/drm/i915/intel_runtime_pm.c +89 -83
index 461c0759e2c4..a6199c6a2005 100644
@@ -2324,89 +2324,96 @@ static struct i915_power_well glk_power_wells[] = {
 	},
 };
 
+#define basic_cnl_power_wells						\
+	{								\
+		.name = "always-on",					\
+		.always_on = 1,						\
+		.domains = POWER_DOMAIN_MASK,				\
+		.ops = &i9xx_always_on_power_well_ops,			\
+		.id = I915_DISP_PW_ALWAYS_ON,				\
+	},								\
+	{								\
+		.name = "power well 1",					\
+		/* Handled by the DMC firmware */			\
+		.domains = 0,						\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_1,					\
+		{							\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "AUX A",					\
+		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_A,				\
+	},								\
+	{								\
+		.name = "AUX B",					\
+		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_B,				\
+	},								\
+	{								\
+		.name = "AUX C",					\
+		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_C,				\
+	},								\
+	{								\
+		.name = "AUX D",					\
+		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_AUX_D,				\
+		},							\
+	{								\
+		.name = "DC off",					\
+		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,		\
+		.ops = &gen9_dc_off_power_well_ops,			\
+		.id = SKL_DISP_PW_DC_OFF,				\
+	},								\
+	{								\
+		.name = "power well 2",					\
+		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,	\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_2,					\
+		{							\
+			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),	\
+			.hsw.has_vga = true,				\
+			.hsw.has_fuses = true,				\
+		},							\
+	},								\
+	{								\
+		.name = "DDI A IO power well",				\
+		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = CNL_DISP_PW_DDI_A,				\
+	},								\
+	{								\
+		.name = "DDI B IO power well",				\
+		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_B,				\
+	},								\
+	{								\
+		.name = "DDI C IO power well",				\
+		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_C,				\
+	},								\
+	{								\
+		.name = "DDI D IO power well",				\
+		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,		\
+		.ops = &hsw_power_well_ops,				\
+		.id = SKL_DISP_PW_DDI_D,				\
+	}
+
 static struct i915_power_well cnl_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = POWER_DOMAIN_MASK,
-		.ops = &i9xx_always_on_power_well_ops,
-		.id = I915_DISP_PW_ALWAYS_ON,
-	},
-	{
-		.name = "power well 1",
-		/* Handled by the DMC firmware */
-		.domains = 0,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_1,
-		{
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "AUX A",
-		.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_A,
-	},
-	{
-		.name = "AUX B",
-		.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_B,
-	},
-	{
-		.name = "AUX C",
-		.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_C,
-	},
-	{
-		.name = "AUX D",
-		.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_AUX_D,
-	},
-	{
-		.name = "DC off",
-		.domains = CNL_DISPLAY_DC_OFF_POWER_DOMAINS,
-		.ops = &gen9_dc_off_power_well_ops,
-		.id = SKL_DISP_PW_DC_OFF,
-	},
-	{
-		.name = "power well 2",
-		.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_2,
-		{
-			.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
-			.hsw.has_vga = true,
-			.hsw.has_fuses = true,
-		},
-	},
-	{
-		.name = "DDI A IO power well",
-		.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = CNL_DISP_PW_DDI_A,
-	},
-	{
-		.name = "DDI B IO power well",
-		.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_B,
-	},
-	{
-		.name = "DDI C IO power well",
-		.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_C,
-	},
-	{
-		.name = "DDI D IO power well",
-		.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-		.id = SKL_DISP_PW_DDI_D,
-	},
+	basic_cnl_power_wells,
+};
+
+static struct i915_power_well cnl_power_wells_with_port_f[] = {
+	basic_cnl_power_wells,
 	{
 		.name = "DDI F IO power well",
 		.domains = CNL_DISPLAY_DDI_F_IO_POWER_DOMAINS,
@@ -2533,7 +2540,11 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	} else if (IS_GEN9_BC(dev_priv)) {
 		set_power_wells(power_domains, skl_power_wells);
 	} else if (IS_CANNONLAKE(dev_priv)) {
-		set_power_wells(power_domains, cnl_power_wells);
Quoted 8 lines

drivers/gpu/drm/i915/intel_runtime_pm.c int intel_power_domains_init(struct drm_i915_private *dev_priv) · line 2550

Quoted 8 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +5 -0
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			set_power_wells(power_domains,
+					cnl_power_wells_with_port_f);
+		else
+			set_power_wells(power_domains, cnl_power_wells);
 	} else if (IS_BROXTON(dev_priv)) {
 		set_power_wells(power_domains, bxt_power_wells);
 	} else if (IS_GEMINILAKE(dev_priv)) {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#22 lore raw

✓ Fi.CI.BAT: success for series starting with [01/11] drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [01/11] drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.
URL : https://patchwork.freedesktop.org/series/35745/
State : success

== Summary ==

Series 35745v1 series starting with [01/11] drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.
https://patchwork.freedesktop.org/api/1.0/series/35745/revisions/1/mbox/

Test gem_sync:

        Subgroup basic-all:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-each:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-many-each:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-store-all:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-store-each:
                skip       -> PASS       (fi-pnv-d510)
Test gem_tiled_blits:
        Subgroup basic:
                skip       -> PASS       (fi-pnv-d510)
Test gem_tiled_fence_blits:
        Subgroup basic:
                skip       -> PASS       (fi-pnv-d510)
Test gem_wait:
        Subgroup basic-busy-all:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-wait-all:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-await-all:
                skip       -> PASS       (fi-pnv-d510)
Test kms_busy:
        Subgroup basic-flip-a:
                skip       -> PASS       (fi-pnv-d510)
        Subgroup basic-flip-b:
                skip       -> PASS       (fi-pnv-d510)
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-legacy:
                skip       -> PASS       (fi-pnv-d510)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                incomplete -> PASS       (fi-snb-2520m) fdo#103713
Test kms_psr_sink_crc:
        Subgroup psr_basic:
                pass       -> DMESG-WARN (fi-skl-6700hq) fdo#101144

fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#101144 https://bugs.freedesktop.org/show_bug.cgi?id=101144

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:435s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:440s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:381s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:502s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:275s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:492s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:494s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:481s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:459s
fi-elk-e7500     total:224  pass:163  dwarn:14  dfail:1   fail:0   skip:45 
fi-gdg-551       total:288  pass:179  dwarn:0   dfail:0   fail:1   skip:108 time:263s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:534s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:412s
fi-hsw-4770r     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:417s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:473s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:424s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:480s
fi-kbl-7560u     total:288  pass:268  dwarn:1   dfail:0   fail:0   skip:19  time:527s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:462s
fi-kbl-r         total:288  pass:260  dwarn:1   dfail:0   fail:0   skip:27  time:525s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:589s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:439s
fi-skl-6600u     total:288  pass:260  dwarn:1   dfail:0   fail:0   skip:27  time:527s
fi-skl-6700hq    total:288  pass:261  dwarn:1   dfail:0   fail:0   skip:26  time:557s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:503s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:506s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:446s
fi-snb-2520m     total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:543s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:418s
Blacklisted hosts:
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:587s
fi-glk-dsi       total:288  pass:169  dwarn:1   dfail:4   fail:0   skip:114 time:302s

7223e9864a303d6401054b0815acb5262726adf8 drm-tip: 2017y-12m-22d-21h-51m-04s UTC integration manifest ad31b438d58e drm/i915/cnl: Don't try to manage Port F power wells on all CNL. 0a1a480bded8 drm/i915/cnl: Fix DP max rate for Cannonlake with port F.
3dfd4ee1829c drm/i915/cnl: Enable DDI-F on Cannonlake.
2ab3caf3e5a0 drm/i915/cnl: Add HPD support for Port F.
bdbd3a542367 drm/i915: For HPD connected port use hpd_pin instead of port. 562f8811c3b8 drm/i915/cnl: Add right GMBUS pin number for HDMI on Port F. f329583d0ad9 drm/i915: Fix DPLCLKA_CFGCR0 bits for Port F.
c7235351e188 drm/i915/cnl: Fix _CNL_PORT_TX_DW2_LN0_F definition.
3d3d59853d81 drm/i915/cnl: Add AUX-F support
c4c215a55de6 drm/i915/cnl: Add Port F definition.
07ac18091789 drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7578/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#23 lore raw

✗ Fi.CI.IGT: warning for series starting with [01/11] drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [01/11] drm/i915/cnl: Add Cannonlake PCI IDs for another SKU.
URL : https://patchwork.freedesktop.org/series/35745/
State : warning

== Summary ==

Test kms_flip:

        Subgroup dpms-vs-vblank-race-interruptible:
                pass       -> FAIL       (shard-hsw) fdo#103060
Test gem_eio:
        Subgroup in-flight:
                dmesg-warn -> PASS       (shard-snb) fdo#104058
Test perf:
        Subgroup polling:
                pass       -> FAIL       (shard-hsw) fdo#102252
Test kms_cursor_crc:
        Subgroup cursor-256x256-suspend:
                skip       -> PASS       (shard-snb) fdo#103375
        Subgroup cursor-size-change:
                skip       -> PASS       (shard-hsw)
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-offscren-pri-shrfb-draw-render:
                pass       -> FAIL       (shard-snb) fdo#101623 +2
        Subgroup fbc-1p-offscren-pri-shrfb-draw-mmap-wc:
                skip       -> PASS       (shard-hsw) fdo#103167
Test kms_atomic_transition:
        Subgroup 1x-modeset-transitions-nonblocking-fencing:
                skip       -> PASS       (shard-hsw)
        Subgroup 1x-modeset-transitions-fencing:
                skip       -> PASS       (shard-hsw)
        Subgroup 1x-modeset-transitions-nonblocking:
                skip       -> PASS       (shard-hsw)
Test kms_busy:
        Subgroup extended-modeset-hang-newfb-with-reset-render-b:
                pass       -> SKIP       (shard-hsw)

fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#104058 https://bugs.freedesktop.org/show_bug.cgi?id=104058
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167

shard-hsw        total:2713 pass:1535 dwarn:1   dfail:0   fail:12  skip:1165 time:9386s
shard-snb        total:2713 pass:1310 dwarn:1   dfail:0   fail:11  skip:1391 time:8087s
Blacklisted hosts:
shard-apl        total:2637 pass:1639 dwarn:1   dfail:0   fail:24  skip:972 time:13434s
shard-kbl        total:2713 pass:1808 dwarn:1   dfail:0   fail:25  skip:879 time:11176s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7578/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#24 lore raw
In reply to Rodrigo Vivi

Em Sex, 2017-12-22 às 15:18 -0800, Rodrigo Vivi escreveu:

Quoted 1 line

By the Spec all CNL skus are GT2.

This is definitely not my understanding, some of the PCI IDs in our driver are clearly marked as GT1 on the spec.

But since we don't use this GTX number anywhere for CNL for the Kernel driver, can't we just KISS and go with intel_cannonlake_info until we actually need it?

Besides that, I really think this patch should be split in 2: one that only adds the new PCI IDs, and another that does the macro/info rework. This should help any possible backports.

Quoted 56 lines

v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c

---
 drivers/gpu/drm/i915/i915_pci.c |  3 +--
 include/drm/i915_pciids.h       | 18 +++++++-----------
 2 files changed, 8 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/i915_pci.c +1 -2
index 36d48422b475..cc87d741135d 100644
@@ -636,8 +636,7 @@ static const struct pci_device_id pciidlist[] = {
 	INTEL_CFL_U_GT1_IDS(&intel_coffeelake_gt1_info),
 	INTEL_CFL_U_GT2_IDS(&intel_coffeelake_gt2_info),
 	INTEL_CFL_U_GT3_IDS(&intel_coffeelake_gt3_info),
-	INTEL_CNL_U_GT2_IDS(&intel_cannonlake_gt2_info),
-	INTEL_CNL_Y_GT2_IDS(&intel_cannonlake_gt2_info),
+	INTEL_CNL_IDS(&intel_cannonlake_gt2_info),
 	{0, 0, 0}
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);
include/drm/i915_pciids.h +3 -7
index 5db0458dd832..9e1fe6634424 100644
@@ -414,24 +414,20 @@
 	INTEL_CFL_U_GT2_IDS(info), \
 	INTEL_CFL_U_GT3_IDS(info)
 
-/* CNL U 2+2 */
-#define INTEL_CNL_U_GT2_IDS(info) \
+/* CNL */
+#define INTEL_CNL_IDS(info) \
 	INTEL_VGA_DEVICE(0x5A52, info), \
 	INTEL_VGA_DEVICE(0x5A5A, info), \
 	INTEL_VGA_DEVICE(0x5A42, info), \
-	INTEL_VGA_DEVICE(0x5A4A, info)
-
-/* CNL Y 2+2 */
-#define INTEL_CNL_Y_GT2_IDS(info) \
+	INTEL_VGA_DEVICE(0x5A4A, info), \
 	INTEL_VGA_DEVICE(0x5A51, info), \
 	INTEL_VGA_DEVICE(0x5A59, info), \
 	INTEL_VGA_DEVICE(0x5A41, info), \
 	INTEL_VGA_DEVICE(0x5A49, info), \
 	INTEL_VGA_DEVICE(0x5A71, info), \
-	INTEL_VGA_DEVICE(0x5A79, info)

include/drm/i915_pciids.h line 433

Quoted 10 lines
include/drm/i915_pciids.h +4 -4
-
-#define INTEL_CNL_IDS(info) \
-	INTEL_CNL_U_GT2_IDS(info), \
-	INTEL_CNL_Y_GT2_IDS(info)
+	INTEL_VGA_DEVICE(0x5A79, info), \
+	INTEL_VGA_DEVICE(0x5A54, info), \
+	INTEL_VGA_DEVICE(0x5A5C, info), \
+	INTEL_VGA_DEVICE(0x5A44, info)
 
 #endif /* _I915_PCIIDS_H */

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#25 lore raw
Quoted 9 lines · Paulo Zanoni

Em Sex, 2017-12-22 às 15:18 -0800, Rodrigo Vivi escreveu:

Quoted 1 line

By the Spec all CNL skus are GT2.

This is definitely not my understanding, some of the PCI IDs in our driver are clearly marked as GT1 on the spec.

But since we don't use this GTX number anywhere for CNL for the Kernel driver, can't we just KISS and go with intel_cannonlake_info until we actually need it?

After reviewing the docs again, I agree with Paulo. Since we are not using it, we could simplify and get rid of it.

Quoted 4 lines

Besides that, I really think this patch should be split in 2: one that only adds the new PCI IDs, and another that does the macro/info rework. This should help any possible backports.

In the end I think any future backport will end up needing to bring both patches to avoid conflicts (it's easier to bring back a small rework as dependency than keep having conflicts in the same place as we backport IDs)... so the split per se seems good so each commit does only one thing, but I'm not sure about the backport argument.

Lucas De Marchi

Quoted 71 lines
Quoted 57 lines

v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c

---
 drivers/gpu/drm/i915/i915_pci.c |  3 +--
 include/drm/i915_pciids.h       | 18 +++++++-----------
 2 files changed, 8 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/i915_pci.c +1 -2
index 36d48422b475..cc87d741135d 100644
@@ -636,8 +636,7 @@ static const struct pci_device_id pciidlist[] = {
      INTEL_CFL_U_GT1_IDS(&intel_coffeelake_gt1_info),
      INTEL_CFL_U_GT2_IDS(&intel_coffeelake_gt2_info),
      INTEL_CFL_U_GT3_IDS(&intel_coffeelake_gt3_info),
-     INTEL_CNL_U_GT2_IDS(&intel_cannonlake_gt2_info),
-     INTEL_CNL_Y_GT2_IDS(&intel_cannonlake_gt2_info),
+     INTEL_CNL_IDS(&intel_cannonlake_gt2_info),
      {0, 0, 0}
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);
include/drm/i915_pciids.h +3 -7
index 5db0458dd832..9e1fe6634424 100644
@@ -414,24 +414,20 @@
      INTEL_CFL_U_GT2_IDS(info), \
      INTEL_CFL_U_GT3_IDS(info)
 
-/* CNL U 2+2 */
-#define INTEL_CNL_U_GT2_IDS(info) \
+/* CNL */
+#define INTEL_CNL_IDS(info) \
      INTEL_VGA_DEVICE(0x5A52, info), \
      INTEL_VGA_DEVICE(0x5A5A, info), \
      INTEL_VGA_DEVICE(0x5A42, info), \
-     INTEL_VGA_DEVICE(0x5A4A, info)
-
-/* CNL Y 2+2 */
-#define INTEL_CNL_Y_GT2_IDS(info) \
+     INTEL_VGA_DEVICE(0x5A4A, info), \
      INTEL_VGA_DEVICE(0x5A51, info), \
      INTEL_VGA_DEVICE(0x5A59, info), \
      INTEL_VGA_DEVICE(0x5A41, info), \
      INTEL_VGA_DEVICE(0x5A49, info), \
      INTEL_VGA_DEVICE(0x5A71, info), \
-     INTEL_VGA_DEVICE(0x5A79, info)

include/drm/i915_pciids.h line 433

Quoted 10 lines
include/drm/i915_pciids.h +4 -4
-
-#define INTEL_CNL_IDS(info) \
-     INTEL_CNL_U_GT2_IDS(info), \
-     INTEL_CNL_Y_GT2_IDS(info)
+     INTEL_VGA_DEVICE(0x5A79, info), \
+     INTEL_VGA_DEVICE(0x5A54, info), \
+     INTEL_VGA_DEVICE(0x5A5C, info), \
+     INTEL_VGA_DEVICE(0x5A44, info)
 
 #endif /* _I915_PCIIDS_H */

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 5 lines
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx