Patch "net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY" has been added to the 4.14-stable tree

This is a note to let you know that I've just added the patch titled

net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY

to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
net-dsa-bcm_sf2-clear-iddq_global_pwr-bit-for-phy.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Florian Fainelli <[email protected]>
Date: Tue, 21 Nov 2017 17:37:46 -0800
Subject: net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY

From: Florian Fainelli <[email protected]>

[ Upstream commit 4b52d010113e11006a389f2a8315167ede9e0b10 ]

The PHY on BCM7278 has an additional bit that needs to be cleared:
IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out of suspend/resume cycles.

---
 drivers/net/dsa/bcm_sf2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -167,7 +167,7 @@ static void bcm_sf2_gphy_enable_set(stru
 	reg = reg_readl(priv, REG_SPHY_CNTRL);
 	if (enable) {
 		reg |= PHY_RESET;
-		reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS | CK25_DIS);
+		reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS | IDDQ_GLOBAL_PWR | CK25_DIS);
 		reg_writel(priv, reg, REG_SPHY_CNTRL);
 		udelay(21);
 		reg = reg_readl(priv, REG_SPHY_CNTRL);

Patches currently in stable-queue which might be from [email protected] are

queue-4.14/phylink-ensure-the-phy-interface-mode-is-appropriately-set.patch queue-4.14/net-dsa-bcm_sf2-clear-iddq_global_pwr-bit-for-phy.patch queue-4.14/phylink-ensure-an-is-enabled.patch