New Hauppauge PCIe devices

PATCH New Brad Love 1 participant 8 messages Jan 6, 2018 – Feb 12, 2018 Media (V4L/DVB)

Share & tools

Brad Love

author

2018-01-06 00:48 UTC #0 lore raw

cover New Hauppauge PCIe devices

Included is support for the following four PCIe devices:
- Hauppauge ImpactVCBe - analog PAL/NTSC
- Hauppauge HVR1264K4 - ATSC/QAM + analog
- Hauppauge Starburst2 - DVB-C/S/T/T2 + analog
- Hauppauge digital only QuadHD models - ATSC/QAM|DVB-C/T/T2

Brad Love (4):
cx23885: Enable new Hauppauge PCIe ImpactVCBe variant
cx23885: Add support for Hauppauge PCIe HVR1265 K4
cx23885: Add support for Hauppauge PCIe Starburst2
cx23885: Add support for new Hauppauge QuadHD (885)

 drivers/media/pci/cx23885/cx23885-cards.c | 86 ++++++++++++++++++++++++++-----
 drivers/media/pci/cx23885/cx23885-core.c  |  8 +++
 drivers/media/pci/cx23885/cx23885-dvb.c   | 70 ++++++++++++++++++++++---
 drivers/media/pci/cx23885/cx23885-input.c |  3 ++
 drivers/media/pci/cx23885/cx23885-video.c |  5 +-
 drivers/media/pci/cx23885/cx23885.h       |  4 ++
 6 files changed, 155 insertions(+), 21 deletions(-)

Signature · 1 line

2.7.4

Brad Love

author

2018-01-06 00:48 UTC #1 lore raw

PATCH 1/4 cx23885: Enable new Hauppauge PCIe ImpactVCBe variant

Add ID of new card revision to driver list

Analog PAL/NTSC capture.

Signed-off-by Brad Love <[email protected]>

---
 drivers/media/pci/cx23885/cx23885-cards.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/media/pci/cx23885/cx23885-cards.c +4 -0

index 3622521..c4b3123 100644
@@ -1028,6 +1028,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subdevice = 0x7133,
 		.card      = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
 	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7137,
+		.card      = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
+	}, {
 		.subvendor = 0x18ac,
 		.subdevice = 0xdb98,
 		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2,

Signature · 1 line

2.7.4

Brad Love

author

2018-01-06 00:48 UTC #2 lore raw

PATCH 2/4 cx23885: Add support for Hauppauge PCIe HVR1265 K4

In reply to Brad Love

Add new PCIe board to driver list and board register/configure functions

cx23885 + lgdt3306a + si2157 digital/analog

Signed-off-by Brad Love <[email protected]>

---
 drivers/media/pci/cx23885/cx23885-cards.c | 27 ++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   | 46 +++++++++++++++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-input.c |  3 ++
 drivers/media/pci/cx23885/cx23885-video.c |  5 +++-
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 5 files changed, 81 insertions(+), 1 deletion(-)

drivers/media/pci/cx23885/cx23885-cards.c +27 -0

index c4b3123..fe42893 100644
@@ -776,6 +776,11 @@ struct cx23885_board cx23885_boards[] = {
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
+		.name		= "Hauppauge WinTV-HVR-1265(161111)",
+		.portc		= CX23885_MPEG_DVB,
+		.force_bff	= 1,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

@@ -1091,6 +1096,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x6b18,
 		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2a18,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1265_K4, /* Hauppauge WinTV HVR-1265 (Model 161xx1, Hybrid ATSC/QAM-B) */
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

@@ -1291,6 +1300,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 150329:
 		/* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
 		break;
+	case 161111:
+		/* WinTV-HVR-1265 K4 (PCIe, Analog/ATSC/QAM-B) */
+		break;
 	case 166100:
 		/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */

@@ -1813,6 +1825,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		 * card does not have any GPIO's connected to subcomponents.
 		 */
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		/*
+		 * GPIO-08 TER1_RESN
+		 * GPIO-09 TER2_RESN
+		 */
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+		cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		break;
 	}
 }

@@ -2058,6 +2082,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		if (dev->i2c_bus[0].i2c_rc == 0)

@@ -2205,6 +2230,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */

@@ -2263,6 +2289,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:

drivers/media/pci/cx23885/cx23885-dvb.c +46 -0

59 lines not on this page · raw message

drivers/media/pci/cx23885/cx23885-input.c +3 -0

index 0f4e542..be49589 100644
@@ -94,6 +94,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	case CX23885_BOARD_DVBSKY_S950:
 	case CX23885_BOARD_DVBSKY_S952:
 	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/*
 		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar

@@ -153,6 +154,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	case CX23885_BOARD_DVBSKY_S950:
 	case CX23885_BOARD_DVBSKY_S952:
 	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.

@@ -283,6 +285,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/* Integrated CX2388[58] IR controller */
 		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
 		/* The grey Hauppauge RC-5 remote */

drivers/media/pci/cx23885/cx23885-video.c +4 -1

index ecc580a..7e69693 100644
@@ -263,6 +263,7 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
 		(dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
 		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
 		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||

@@ -993,7 +994,8 @@ static int cx23885_set_freq_via_ops(struct cx23885_dev *dev,
 
 	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
 	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
-	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4))
 		fe = &dev->ts1.analog_fe;
 
 	if (fe && fe->ops.tuner_ops.set_analog_params) {

@@ -1022,6 +1024,7 @@ int cx23885_set_frequency(struct file *file, void *priv,
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		ret = cx23885_set_freq_via_ops(dev, f);
 		break;

drivers/media/pci/cx23885/cx23885.h +1 -0

index 6aab713..cfe3ced 100644
@@ -107,6 +107,7 @@
 #define CX23885_BOARD_VIEWCAST_460E            55
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
+#define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4

Brad Love

author

2018-02-12 21:07 UTC #3 lore raw

PATCH v2 2/4 cx23885: Add support for Hauppauge PCIe HVR1265 K4

Add new PCIe board to driver list and board register/configure functions

cx23885 + lgdt3306a + si2157 digital/analog
and
composite/s-video + stereo audio capture

Signed-off-by Brad Love <[email protected]>

---
Changes since v1:
- add tuner_type
- add missing composite/s-video analog inputs

 drivers/media/pci/cx23885/cx23885-cards.c | 43 +++++++++++++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   | 46 +++++++++++++++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-input.c |  3 ++
 drivers/media/pci/cx23885/cx23885-video.c |  5 +++-
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 5 files changed, 97 insertions(+), 1 deletion(-)

drivers/media/pci/cx23885/cx23885-cards.c +43 -0

index 3622521..2cc6390 100644
@@ -776,6 +776,27 @@ struct cx23885_board cx23885_boards[] = {
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
+		.name		= "Hauppauge WinTV-HVR-1265(161111)",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

@@ -1087,6 +1108,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x6b18,
 		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2a18,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1265_K4, /* Hauppauge WinTV HVR-1265 (Model 161xx1, Hybrid ATSC/QAM-B) */
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

@@ -1287,6 +1312,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 150329:
 		/* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
 		break;
+	case 161111:
+		/* WinTV-HVR-1265 K4 (PCIe, Analog/ATSC/QAM-B) */
+		break;
 	case 166100:
 		/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */

@@ -1809,6 +1837,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		 * card does not have any GPIO's connected to subcomponents.
 		 */
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+		/*
+		 * GPIO-08 TER1_RESN
+		 * GPIO-09 TER2_RESN
+		 */
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
+		cx23885_gpio_clear(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		cx23885_gpio_set(dev, GPIO_8 | GPIO_9);
+		msleep(100);
+		break;
 	}
 }

@@ -2054,6 +2094,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		if (dev->i2c_bus[0].i2c_rc == 0)

@@ -2201,6 +2242,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */

@@ -2259,6 +2301,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:

drivers/media/pci/cx23885/cx23885-dvb.c +46 -0

59 lines not on this page · raw message

drivers/media/pci/cx23885/cx23885-input.c +3 -0

index 0f4e542..be49589 100644
@@ -94,6 +94,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	case CX23885_BOARD_DVBSKY_S950:
 	case CX23885_BOARD_DVBSKY_S952:
 	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/*
 		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar

@@ -153,6 +154,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	case CX23885_BOARD_DVBSKY_S950:
 	case CX23885_BOARD_DVBSKY_S952:
 	case CX23885_BOARD_DVBSKY_T982:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.

@@ -283,6 +285,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 		/* Integrated CX2388[58] IR controller */
 		allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER;
 		/* The grey Hauppauge RC-5 remote */

drivers/media/pci/cx23885/cx23885-video.c +4 -1

index a03dcb6..f8a3dea 100644
@@ -263,6 +263,7 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
 		(dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4) ||
 		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
 		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
 		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||

@@ -993,7 +994,8 @@ static int cx23885_set_freq_via_ops(struct cx23885_dev *dev,
 
 	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
 	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
-	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1265_K4))
 		fe = &dev->ts1.analog_fe;
 
 	if (fe && fe->ops.tuner_ops.set_analog_params) {

@@ -1022,6 +1024,7 @@ int cx23885_set_frequency(struct file *file, void *priv,
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		ret = cx23885_set_freq_via_ops(dev, f);
 		break;

drivers/media/pci/cx23885/cx23885.h +1 -0

index 2a17209..7c7a103 100644
@@ -107,6 +107,7 @@
 #define CX23885_BOARD_VIEWCAST_460E            55
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
+#define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4

Brad Love

author

2018-01-06 00:48 UTC #4 lore raw

PATCH 3/4 cx23885: Add support for Hauppauge PCIe Starburst2

In reply to Brad Love

Add new PCIe DVB-S/S2.
A single port Hauppauge HVR-5525

cx23885 + a8293 + m88rs6000t

Signed-off-by Brad Love <[email protected]>

---
 drivers/media/pci/cx23885/cx23885-cards.c | 11 +++++++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   | 18 ++++++++++--------
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 3 files changed, 22 insertions(+), 8 deletions(-)

drivers/media/pci/cx23885/cx23885-cards.c +11 -0

index fe42893..70f1047 100644
@@ -781,6 +781,10 @@ struct cx23885_board cx23885_boards[] = {
 		.portc		= CX23885_MPEG_DVB,
 		.force_bff	= 1,
 	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST2] = {
+		.name		= "Hauppauge WinTV-Starburst2",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

@@ -1100,6 +1104,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x2a18,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1265_K4, /* Hauppauge WinTV HVR-1265 (Model 161xx1, Hybrid ATSC/QAM-B) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf02a,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST2,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

@@ -1796,6 +1804,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 		/*
 		 * HVR5525 GPIO Details:
 		 *  GPIO-00 IR_WIDE

@@ -2083,6 +2092,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		if (dev->i2c_bus[0].i2c_rc == 0)

@@ -2223,6 +2233,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

drivers/media/pci/cx23885/cx23885-dvb.c +10 -8

index 2b23636..260d843 100644
@@ -1206,6 +1206,8 @@ static int dvb_register(struct cx23885_tsport *port)
 	struct si2157_config si2157_config;
 	struct ts2020_config ts2020_config;
 	struct m88ds3103_platform_data m88ds3103_pdata;
+	struct m88rs6000t_config m88rs6000t_config = {};
+	struct a8293_platform_data a8293_pdata = {};
 	struct i2c_board_info info;
 	struct i2c_adapter *adapter;
 	struct i2c_client *client_demod = NULL, *client_tuner = NULL;

@@ -2229,9 +2231,10 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		port->i2c_client_tuner = client_tuner;
 		break;
-	case CX23885_BOARD_HAUPPAUGE_HVR5525: {
-		struct m88rs6000t_config m88rs6000t_config;
-		struct a8293_platform_data a8293_pdata = {};
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
 
 		switch (port->nr) {

@@ -2240,7 +2243,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			/* attach frontend */
 			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
 					&hauppauge_hvr5525_m88ds3103_config,
-					&dev->i2c_bus[0].i2c_adap, &adapter);
+					&i2c_bus->i2c_adap, &adapter);
 			if (fe0->dvb.frontend == NULL)
 				break;

@@ -2251,7 +2254,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x0b;
 			info.platform_data = &a8293_pdata;
 			request_module("a8293");
-			client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
 			if (!client_sec || !client_sec->dev.driver)
 				goto frontend_detach;
 			if (!try_module_get(client_sec->dev.driver->owner)) {

@@ -2293,7 +2296,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x64;
 			info.platform_data = &si2168_config;
 			request_module("%s", info.type);
-			client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
 			if (!client_demod || !client_demod->dev.driver)
 				goto frontend_detach;
 			if (!try_module_get(client_demod->dev.driver->owner)) {

@@ -2311,7 +2314,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x60;
 			info.platform_data = &si2157_config;
 			request_module("%s", info.type);
-			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			client_tuner = i2c_new_device(&i2c_bus2->i2c_adap, &info);
 			if (!client_tuner || !client_tuner->dev.driver) {
 				module_put(client_demod->dev.driver->owner);
 				i2c_unregister_device(client_demod);

@@ -2329,7 +2332,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
-	}
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */

drivers/media/pci/cx23885/cx23885.h +1 -0

index cfe3ced..6523fe3 100644
@@ -108,6 +108,7 @@
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
 #define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
+#define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4

Brad Love

author

2018-02-12 21:08 UTC #5 lore raw

PATCH v2 3/4 cx23885: Add support for Hauppauge PCIe Starburst2

Add new PCIe DVB-S/S2.
A single port Hauppauge HVR-5525

cx23885 + a8293 + m88rs6000t

Signed-off-by Brad Love <[email protected]>

---
Changes since v1:
- regen for dependency

 drivers/media/pci/cx23885/cx23885-cards.c | 11 +++++++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   | 18 ++++++++++--------
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 3 files changed, 22 insertions(+), 8 deletions(-)

drivers/media/pci/cx23885/cx23885-cards.c +11 -0

index 2cc6390..4474d1b 100644
@@ -797,6 +797,10 @@ struct cx23885_board cx23885_boards[] = {
 			.amux   = CX25840_AUDIO7,
 		} },
 	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST2] = {
+		.name		= "Hauppauge WinTV-Starburst2",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

@@ -1112,6 +1116,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x2a18,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1265_K4, /* Hauppauge WinTV HVR-1265 (Model 161xx1, Hybrid ATSC/QAM-B) */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf02a,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST2,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

@@ -1808,6 +1816,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 		/*
 		 * HVR5525 GPIO Details:
 		 *  GPIO-00 IR_WIDE

@@ -2095,6 +2104,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		if (dev->i2c_bus[0].i2c_rc == 0)

@@ -2235,6 +2245,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

drivers/media/pci/cx23885/cx23885-dvb.c +10 -8

index 2b23636..260d843 100644
@@ -1206,6 +1206,8 @@ static int dvb_register(struct cx23885_tsport *port)
 	struct si2157_config si2157_config;
 	struct ts2020_config ts2020_config;
 	struct m88ds3103_platform_data m88ds3103_pdata;
+	struct m88rs6000t_config m88rs6000t_config = {};
+	struct a8293_platform_data a8293_pdata = {};
 	struct i2c_board_info info;
 	struct i2c_adapter *adapter;
 	struct i2c_client *client_demod = NULL, *client_tuner = NULL;

@@ -2229,9 +2231,10 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		port->i2c_client_tuner = client_tuner;
 		break;
-	case CX23885_BOARD_HAUPPAUGE_HVR5525: {
-		struct m88rs6000t_config m88rs6000t_config;
-		struct a8293_platform_data a8293_pdata = {};
+	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
+	case CX23885_BOARD_HAUPPAUGE_HVR5525:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
 
 		switch (port->nr) {

@@ -2240,7 +2243,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			/* attach frontend */
 			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
 					&hauppauge_hvr5525_m88ds3103_config,
-					&dev->i2c_bus[0].i2c_adap, &adapter);
+					&i2c_bus->i2c_adap, &adapter);
 			if (fe0->dvb.frontend == NULL)
 				break;

@@ -2251,7 +2254,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x0b;
 			info.platform_data = &a8293_pdata;
 			request_module("a8293");
-			client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info);
 			if (!client_sec || !client_sec->dev.driver)
 				goto frontend_detach;
 			if (!try_module_get(client_sec->dev.driver->owner)) {

@@ -2293,7 +2296,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x64;
 			info.platform_data = &si2168_config;
 			request_module("%s", info.type);
-			client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
 			if (!client_demod || !client_demod->dev.driver)
 				goto frontend_detach;
 			if (!try_module_get(client_demod->dev.driver->owner)) {

@@ -2311,7 +2314,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			info.addr = 0x60;
 			info.platform_data = &si2157_config;
 			request_module("%s", info.type);
-			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			client_tuner = i2c_new_device(&i2c_bus2->i2c_adap, &info);
 			if (!client_tuner || !client_tuner->dev.driver) {
 				module_put(client_demod->dev.driver->owner);
 				i2c_unregister_device(client_demod);

@@ -2329,7 +2332,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
-	}
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */

drivers/media/pci/cx23885/cx23885.h +1 -0

index 7c7a103..197fe64 100644
@@ -108,6 +108,7 @@
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
 #define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
+#define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4

Brad Love

author

2018-01-06 00:48 UTC #6 lore raw

PATCH 4/4 cx23885: Add support for new Hauppauge QuadHD (885)

In reply to Brad Love

Add new QuadHD digital only PCIe boards to driver list. Differentiate them from 888 digital/analog QuadHD models.

Signed-off-by Brad Love <[email protected]>

---
 drivers/media/pci/cx23885/cx23885-cards.c | 42 ++++++++++++++++++++++---------
 drivers/media/pci/cx23885/cx23885-core.c  |  8 ++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   |  6 +++++
 drivers/media/pci/cx23885/cx23885.h       |  2 ++
 4 files changed, 46 insertions(+), 12 deletions(-)

drivers/media/pci/cx23885/cx23885-cards.c +30 ~~-12~~

index 70f1047..a0d8858 100644
@@ -771,11 +771,21 @@ struct cx23885_board cx23885_boards[] = {
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885] = {
+		.name       = "Hauppauge WinTV-QuadHD-DVB(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
 		.name        = "Hauppauge WinTV-QuadHD-ATSC",
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885] = {
+		.name       = "Hauppauge WinTV-QuadHD-ATSC(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
 		.name		= "Hauppauge WinTV-HVR-1265(161111)",
 		.portc		= CX23885_MPEG_DVB,

@@ -1311,25 +1321,25 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 161111:
 		/* WinTV-HVR-1265 (PCIe, Analog/ATSC/QAM-B) */
 		break;
-	case 166100:
+	case 166100: /* 888 version, hybrid */
+	case 166200: /* 885 version, DVB only */
 		/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */
 		break;
-	case 166101:
+	case 166101: /* 888 version, hybrid */
+	case 166201: /* 885 version, DVB only */
 		/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */
 		break;
-	case 165100:
-		/*
-		 * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
-		 * ATSC, ATSC
-		 */
+	case 165100: /* 888 version, hybrid */
+	case 165200: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
 		break;
-	case 165101:
-		/*
-		 * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
-		 * ATSC, ATSC
-		 */
+	case 165101: /* 888 version, hybrid */
+	case 165201: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 2 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
 		break;
 	default:
 		pr_warn("%s: warning: unknown hauppauge model #%d\n",

@@ -1835,6 +1845,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		 */
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		/*
 		 * GPIO-08 TER1_RESN
 		 * GPIO-09 TER2_RESN

@@ -2094,7 +2106,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;

@@ -2243,7 +2257,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

@@ -2301,6 +2317,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:

drivers/media/pci/cx23885/cx23885-core.c +8 -0

index 8f63df1..8afddd6 100644
@@ -869,6 +869,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 		cx23885_card_list(dev);
 	}
 
+	if (dev->pci->device == 0x8852) {
+		/* no DIF on cx23885, so no analog tuner support possible */
+		if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885;
+		else if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885;
+	}
+
 	/* If the user specific a clk freq override, apply it */
 	if (cx23885_boards[dev->board].clk_freq > 0)
 		dev->clk_freq = cx23885_boards[dev->board].clk_freq;

drivers/media/pci/cx23885/cx23885-dvb.c +6 -0

index 260d843..2bd45ad 100644
@@ -2333,6 +2333,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */
 		case 1:

@@ -2430,6 +2433,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */
 		case 1:

drivers/media/pci/cx23885/cx23885.h +2 -0

index 6523fe3..6e659be 100644
@@ -109,6 +109,8 @@
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
 #define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
 #define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4

Brad Love

author

2018-02-12 21:09 UTC #7 lore raw

PATCH v2 4/4 cx23885: Add support for new Hauppauge QuadHD (885)

Add new QuadHD digital only PCIe boards to driver list. Differentiate them from 888 digital/analog QuadHD models.

Signed-off-by Brad Love <[email protected]>

---
Changes since v1:
- regen for dependency

 drivers/media/pci/cx23885/cx23885-cards.c | 42 ++++++++++++++++++++++---------
 drivers/media/pci/cx23885/cx23885-core.c  |  8 ++++++
 drivers/media/pci/cx23885/cx23885-dvb.c   |  6 +++++
 drivers/media/pci/cx23885/cx23885.h       |  2 ++
 4 files changed, 46 insertions(+), 12 deletions(-)

drivers/media/pci/cx23885/cx23885-cards.c +30 ~~-12~~

index 4474d1b..7c64880 100644
@@ -771,11 +771,21 @@ struct cx23885_board cx23885_boards[] = {
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885] = {
+		.name       = "Hauppauge WinTV-QuadHD-DVB(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
 		.name        = "Hauppauge WinTV-QuadHD-ATSC",
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885] = {
+		.name       = "Hauppauge WinTV-QuadHD-ATSC(885)",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
 		.name		= "Hauppauge WinTV-HVR-1265(161111)",
 		.porta		= CX23885_ANALOG_VIDEO,

@@ -1323,25 +1333,25 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 161111:
 		/* WinTV-HVR-1265 K4 (PCIe, Analog/ATSC/QAM-B) */
 		break;
-	case 166100:
+	case 166100: /* 888 version, hybrid */
+	case 166200: /* 885 version, DVB only */
 		/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */
 		break;
-	case 166101:
+	case 166101: /* 888 version, hybrid */
+	case 166201: /* 885 version, DVB only */
 		/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */
 		break;
-	case 165100:
-		/*
-		 * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
-		 * ATSC, ATSC
-		 */
+	case 165100: /* 888 version, hybrid */
+	case 165200: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
 		break;
-	case 165101:
-		/*
-		 * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
-		 * ATSC, ATSC
-		 */
+	case 165101: /* 888 version, hybrid */
+	case 165201: /* 885 version, digital only */
+		/* WinTV-QuadHD (ATSC) Tuner Pair 2 (PCIe, IR, half height,
+		 * ATSC/QAM-B, ATSC/QAM-B */
 		break;
 	default:
 		pr_warn("%s: warning: unknown hauppauge model #%d\n",

@@ -1847,6 +1857,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		 */
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		/*
 		 * GPIO-08 TER1_RESN
 		 * GPIO-09 TER2_RESN

@@ -2106,7 +2118,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_STARBURST2:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;

@@ -2255,7 +2269,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

@@ -2313,6 +2329,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
 	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:

drivers/media/pci/cx23885/cx23885-core.c +8 -0

index 8f63df1..8afddd6 100644
@@ -869,6 +869,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 		cx23885_card_list(dev);
 	}
 
+	if (dev->pci->device == 0x8852) {
+		/* no DIF on cx23885, so no analog tuner support possible */
+		if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885;
+		else if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB)
+			dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885;
+	}
+
 	/* If the user specific a clk freq override, apply it */
 	if (cx23885_boards[dev->board].clk_freq > 0)
 		dev->clk_freq = cx23885_boards[dev->board].clk_freq;

drivers/media/pci/cx23885/cx23885-dvb.c +6 -0

index 260d843..2bd45ad 100644
@@ -2333,6 +2333,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */
 		case 1:

@@ -2430,6 +2433,9 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+		pr_info("%s(): board=%d port=%d\n", __func__,
+			dev->board, port->nr);
 		switch (port->nr) {
 		/* port b - Terrestrial/cable */
 		case 1:

drivers/media/pci/cx23885/cx23885.h +2 -0

index 197fe64..d54c7ee 100644
@@ -109,6 +109,8 @@
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
 #define CX23885_BOARD_HAUPPAUGE_HVR1265_K4     58
 #define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002

Signature · 1 line

2.7.4