Skip to contentSkip to conversation

doc: mxc_hab: Improve the config option list

PATCH New Fabio Estevam 3 participants 3 messages Jan 21, 2018 – Feb 4, 2018 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 doc: mxc_hab: Improve the config option list

From: Fabio Estevam <[email protected]>

The original text is from the time that the config options were not converted to Kconfig.

After the conversion to Kconfig only CONFIG_SECURE_BOOT and CONFIG_CMD_DEKBLOB need to be selected by the user.

The other config options are automatically selected by the Kconfig logic.

---
 doc/README.mxc_hab | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
doc/README.mxc_hab +3 -6
index c1f8ded..4bd07d3 100644
@@ -68,13 +68,10 @@ the CSF file.
 
 The DEK blob is generated by an authenticated U-Boot image with
 the dek_blob cmd enabled. The image used for DEK blob generation
-needs to have the following configurations enabled:
+needs to have the following configurations enabled in Kconfig:
 
-CONFIG_SECURE_BOOT
-CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
-CONFIG_FSL_CAAM
-CONFIG_CMD_DEKBLOB
-CONFIG_SYS_FSL_SEC_LE
+CONFIG_SECURE_BOOT=y
+CONFIG_CMD_DEKBLOB=y
 
 Note: The encrypted boot feature is only supported by HABv4 or
 greater.
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 doc: mxc_hab: Improve the config option list

Hi Fabio,

2018-01-21 15:57 GMT-02:00 Fabio Estevam <[email protected]>:

Quoted 5 lines

From: Fabio Estevam <[email protected]>

The original text is from the time that the config options were not converted to Kconfig.

Quoted 7 lines

After the conversion to Kconfig only CONFIG_SECURE_BOOT and CONFIG_CMD_DEKBLOB need to be selected by the user.

The other config options are automatically selected by the Kconfig logic.

Thanks,
Breno Lima

#2 lore raw

PATCH 1/1 doc: mxc_hab: Improve the config option list

In reply to Fabio Estevam
Quoted 28 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

The original text is from the time that the config options were not converted to Kconfig.

After the conversion to Kconfig only CONFIG_SECURE_BOOT and CONFIG_CMD_DEKBLOB need to be selected by the user.

The other config options are automatically selected by the Kconfig logic.

---
 doc/README.mxc_hab | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
doc/README.mxc_hab +1 -1
index c1f8ded..4bd07d3 100644
@@ -68,13 +68,10 @@ the CSF file.
 
 The DEK blob is generated by an authenticated U-Boot image with
 the dek_blob cmd enabled. The image used for DEK blob generation
-needs to have the following configurations enabled:
+needs to have the following configurations enabled in Kconfig:
 

doc/README.mxc_hab the CSF file. · line 77

Quoted 10 lines
doc/README.mxc_hab +2 -5
-CONFIG_SECURE_BOOT
-CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
-CONFIG_FSL_CAAM
-CONFIG_CMD_DEKBLOB
-CONFIG_SYS_FSL_SEC_LE
+CONFIG_SECURE_BOOT=y
+CONFIG_CMD_DEKBLOB=y
 
 Note: The encrypted boot feature is only supported by HABv4 or
 greater.

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================