Skip to contentSkip to conversation

ARM: dts: imx6q: engicam LVDS panel changes

PATCH In review Jagan Teki 4 participants 12 messages Feb 4, 2018 – Mar 12, 2018

Subsystems (6)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

v3 cover ARM: dts: imx6q: engicam LVDS panel changes

Series adda LVDS panel attributes on panel drivers instead of defining them in dts nodes, and also added new icorem6 engicam boards.

Jagan Teki (7):
drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
ARM: dts: imx6dl-icore: Add LVDS node
drm/panel: simple: Add support for KEO TX31D200VM0BAA
ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
initial support
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
support

 .../display/panel/ampire,am-800480aytzqw-00h.txt   | 25 +++++++++
 .../bindings/display/panel/koe,tx31d200vm0baa.txt  | 25 +++++++++
 arch/arm/boot/dts/Makefile                         |  2 +
 arch/arm/boot/dts/imx6dl-icore.dts                 | 28 ++++++++++
 arch/arm/boot/dts/imx6q-icore-mipi.dts             | 25 +++++++++
 arch/arm/boot/dts/imx6q-icore-ofcap12.dts          | 31 ++++++-----
 arch/arm/boot/dts/imx6q-icore-ofcap7.dts           | 65 ++++++++++++++++++++++
 arch/arm/boot/dts/imx6q-icore.dts                  | 31 ++++++-----
 arch/arm/boot/dts/imx6qdl-icore.dtsi               | 25 ++++++++-
 drivers/gpu/drm/panel/panel-simple.c               | 54 ++++++++++++++++++
 10 files changed, 282 insertions(+), 29 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
 create mode 100644 arch/arm/boot/dts/imx6q-icore-mipi.dts
 create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap7.dts
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author
#1 lore raw

PATCH v3 1/7 drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H

This adds support for the Ampire AM-800480AYTZQW-00H 7.0" WGA LCD, which can be supported by the simple panel driver.

---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example

 .../display/panel/ampire,am-800480aytzqw-00h.txt   | 25 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt new file +25 -0
new file mode 100644
index 0000000..abb5eee
@@ -0,0 +1,25 @@
+Ampire AM-800480AYTZQW-00H 7.0" WVGA TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "ampire,am-800480aytzqw-00h"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+	panel {
+		compatible = "ampire,am-800480aytzqw-00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
drivers/gpu/drm/panel/panel-simple.c +27 -0
index 5591984..2ecc14b 100644
@@ -412,6 +412,30 @@ static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct display_timing ampire_am_800480aytzqw_00h_timing = {
+	.pixelclock = { 27700000, 29200000, 39600000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 12, 40, 212 },
+	.hback_porch = { 88, 88, 88 },
+	.hsync_len = { 1, 2, 40 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 1, 13, 88 },
+	.vback_porch = { 32, 32, 32 },
+	.vsync_len = { 1, 2, 3 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc ampire_am_800480aytzqw_00h = {
+	.timings = &ampire_am_800480aytzqw_00h_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
 static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
 	.clock = 33333,
 	.hdisplay = 800,
@@ -2028,6 +2052,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "ampire,am-480272h3tmqw-t01h",
 		.data = &ampire_am_480272h3tmqw_t01h,
 	}, {
+		.compatible = "ampire,am-800480aytzqw-00h",
+		.data = &ampire_am_800480aytzqw_00h,
+	}, {
 		.compatible = "ampire,am800480r3tmqwa1h",
 		.data = &ampire_am800480r3tmqwa1h,
 	}, {
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw

Re: [PATCH v3 1/7] drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H

Hi Jagan,

Quoted 66 lines · Jagan Teki

This adds support for the Ampire AM-800480AYTZQW-00H 7.0" WGA LCD, which can be supported by the simple panel driver.

---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example

 .../display/panel/ampire,am-800480aytzqw-00h.txt   | 25 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt new file +25 -0
new file mode 100644
index 0000000..abb5eee
@@ -0,0 +1,25 @@
+Ampire AM-800480AYTZQW-00H 7.0" WVGA TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "ampire,am-800480aytzqw-00h"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+	panel {
+		compatible = "ampire,am-800480aytzqw-00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
drivers/gpu/drm/panel/panel-simple.c +11 -0
index 5591984..2ecc14b 100644
@@ -412,6 +412,30 @@ static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct display_timing ampire_am_800480aytzqw_00h_timing = {
+	.pixelclock = { 27700000, 29200000, 39600000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 12, 40, 212 },
+	.hback_porch = { 88, 88, 88 },
+	.hsync_len = { 1, 2, 40 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 1, 13, 88 },
+	.vback_porch = { 32, 32, 32 },
+	.vsync_len = { 1, 2, 3 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,

drivers/gpu/drm/panel/panel-simple.c static const struct panel_desc ampire_am_480272h3tmqw_t01h = { · line 435

Quoted 10 lines
drivers/gpu/drm/panel/panel-simple.c +10 -0
+};
+
+static const struct panel_desc ampire_am_800480aytzqw_00h = {
+	.timings = &ampire_am_800480aytzqw_00h_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 86,
+	},

If the panel datasheet specifies minimal prepare, enable, disable, and unprepare delays, it would be good to add them to the panel descriptor.

Quoted 7 lines
drivers/gpu/drm/panel/panel-simple.c +3 -0
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
 static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
 	.clock = 33333,
 	.hdisplay = 800,

drivers/gpu/drm/panel/panel-simple.c static const struct of_device_id platform_of_match[] = { · line 2060

Quoted 9 lines
drivers/gpu/drm/panel/panel-simple.c +3 -0
@@ -2028,6 +2052,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "ampire,am-480272h3tmqw-t01h",
 		.data = &ampire_am_480272h3tmqw_t01h,
 	}, {
+		.compatible = "ampire,am-800480aytzqw-00h",
+		.data = &ampire_am_800480aytzqw_00h,
+	}, {
 		.compatible = "ampire,am800480r3tmqwa1h",
 		.data = &ampire_am800480r3tmqwa1h,
 	}, {

regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#3 lore raw

PATCH v3 2/7 ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple

In reply to Jagan Teki

Switch to use ampire,am-800480aytzqw-00h LVDS timings from panel-simple instead hard coding the same in dts.

---
Changes for v3, v2:
- none

 arch/arm/boot/dts/imx6q-icore.dts    | 31 +++++++++++++++++--------------
 arch/arm/boot/dts/imx6qdl-icore.dtsi |  2 +-
 2 files changed, 18 insertions(+), 15 deletions(-)
arch/arm/boot/dts/imx6q-icore.dts +17 -14
index 5613dd9..c8e464e 100644
@@ -48,6 +48,17 @@
 / {
 	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
 	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "ampire,am-800480aytzqw-00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -71,22 +82,14 @@
 	status = "okay";
 
 	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
+		reg = <0>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <30>;
-				hfront-porch = <30>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <64>;
-				vsync-len = <20>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
arch/arm/boot/dts/imx6qdl-icore.dtsi +1 -1
index a1b469c..5fd9e00 100644
@@ -49,7 +49,7 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
-	backlight {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 100000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author
#4 lore raw

PATCH v3 3/7 ARM: dts: imx6dl-icore: Add LVDS node

In reply to Jagan Teki

Add ampire,am-800480aytzqw-00h LVDS support by using timings from panel-simple.

---
Changes for v3, v2:
- none

 arch/arm/boot/dts/imx6dl-icore.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
arch/arm/boot/dts/imx6dl-icore.dts +28 -0
index 971f9fc..74bff84 100644
@@ -48,6 +48,17 @@
 / {
 	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
 	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+
+	panel {
+		compatible = "ampire,am-800480aytzqw-00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -66,3 +77,20 @@
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH v3 4/7 drm/panel: simple: Add support for KEO TX31D200VM0BAA

In reply to Jagan Teki

This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver.

---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example

 .../bindings/display/panel/koe,tx31d200vm0baa.txt  | 25 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt new file +25 -0
new file mode 100644
index 0000000..6a036ed
@@ -0,0 +1,25 @@
+Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "koe,tx31d200vm0baa"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
drivers/gpu/drm/panel/panel-simple.c +27 -0
index 2ecc14b..8a0e4a8 100644
@@ -1241,6 +1241,30 @@ static const struct panel_desc innolux_zj070na_01p = {
 	},
 };
 
+static const struct display_timing koe_tx31d200vm0baa_timing = {
+	.pixelclock = { 39600000, 43200000, 48000000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 16, 36, 56 },
+	.hback_porch = { 16, 36, 56 },
+	.hsync_len = { 8, 8, 8 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 6, 21, 33.5 },
+	.vback_porch = { 6, 21, 33.5 },
+	.vsync_len = { 8, 8, 8 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc koe_tx31d200vm0baa = {
+	.timings = &koe_tx31d200vm0baa_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 292,
+		.height = 109,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
 static const struct display_timing kyo_tcg121xglp_timing = {
 	.pixelclock = { 52000000, 65000000, 71000000 },
 	.hactive = { 1024, 1024, 1024 },
@@ -2151,6 +2175,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "innolux,zj070na-01p",
 		.data = &innolux_zj070na_01p,
 	}, {
+		.compatible = "koe,tx31d200vm0baa",
+		.data = &koe_tx31d200vm0baa,
+	}, {
 		.compatible = "kyo,tcg121xglp",
 		.data = &kyo_tcg121xglp,
 	}, {
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#6 lore raw

Re: [PATCH v3 4/7] drm/panel: simple: Add support for KEO TX31D200VM0BAA

Quoted 12 lines · Jagan Teki

This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver.

---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example

Quoted 4 lines
 .../bindings/display/panel/koe,tx31d200vm0baa.txt  | 25 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt

The koe vendor prefix is undocumented, please send a patch to add it to Documentation/devicetree/bindings/vendor-prefixes.txt.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180312/e15f7917/attachment.sig>

author
#7 lore raw

PATCH v3 5/7 ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple

In reply to Jagan Teki

Switch to use koe_tx31d200vm0baa LVDS timings from panel-simple instead hard coding the same in dts.

---
Changes for v3, v2:
- none

 arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)
arch/arm/boot/dts/imx6q-icore-ofcap12.dts +17 -14
index 9e230f5..6e27c81 100644
@@ -48,28 +48,31 @@
 / {
 	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
 	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &ldb {
 	status = "okay";
 
 	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
+		reg = <0>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <46800000>;
-				hactive = <1280>;
-				vactive = <480>;
-				hback-porch = <353>;
-				hfront-porch = <47>;
-				vback-porch = <39>;
-				vfront-porch = <4>;
-				hsync-len = <8>;
-				vsync-len = <2>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author
#8 lore raw

PATCH v3 6/7 ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7 initial support

In reply to Jagan Teki

i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus openframe display carriers" which are good solution for develop user friendly graphic user interface.

ofcap 7 general features:

CPU           NXP Freescale i.MX6Q rev1.5 at 792 MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC, 512MB
LVDS Display  TFT 7" industrial, 800x480 resolution
Touchscreen   EP0700M06 EDT Polytouch capacitive touch screen
Backlight     LED backlight, brightness 300 Cd/m2
Power supply  15 to 30 Vdc

---
Changes for v3:
- none
Changes for v2:
- Updated licence text - remove big notes, add SPDX and author

 arch/arm/boot/dts/Makefile               |  1 +
 arch/arm/boot/dts/imx6q-icore-ofcap7.dts | 65 ++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap7.dts
arch/arm/boot/dts/Makefile +1 -0
index ade7a38..aa60320 100644
@@ -458,6 +458,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-icore.dtb \
 	imx6q-icore-ofcap10.dtb \
 	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-ofcap7.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
arch/arm/boot/dts/imx6q-icore-ofcap7.dts new file +65 -0

65 lines not on this page · raw message

Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author
#9 lore raw

PATCH v3 7/7 ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support

In reply to Jagan Teki

i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application.

notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc

---
Changes for v3:
- none
Changes for v2:
- new patch

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/imx6q-icore-mipi.dts | 25 +++++++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi   | 23 +++++++++++++++++++++++
 3 files changed, 49 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore-mipi.dts
arch/arm/boot/dts/Makefile +1 -0
index aa60320..a0e46f3 100644
@@ -456,6 +456,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-hummingboard2-emmc-som-v15.dtb \
 	imx6q-hummingboard2-som-v15.dtb \
 	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
 	imx6q-icore-ofcap10.dtb \
 	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-ofcap7.dtb \
arch/arm/boot/dts/imx6q-icore-mipi.dts new file +25 -0
new file mode 100644
index 0000000..acd3d33
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
arch/arm/boot/dts/imx6qdl-icore.dtsi +23 -0
index 5fd9e00..d696447 100644
@@ -265,6 +265,14 @@
 	status = "okay";
 };
 
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_audmux: audmux {
 		fsl,pins = <
@@ -378,4 +386,19 @@
 			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
 		>;
 	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
 };
Signature · 1 line
2.7.4
#10 lore raw
In reply to Jagan Teki
Quoted 16 lines · Jagan Teki

Series adda LVDS panel attributes on panel drivers instead of defining them in dts nodes, and also added new icorem6 engicam boards.

Jagan Teki (7):
drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
ARM: dts: imx6dl-icore: Add LVDS node
drm/panel: simple: Add support for KEO TX31D200VM0BAA
ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
initial support
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
support

 .../display/panel/ampire,am-800480aytzqw-00h.txt   | 25 +++++++++
 .../bindings/display/panel/koe,tx31d200vm0baa.txt  | 25 +++++++++

...

Quoted 1 line
 drivers/gpu/drm/panel/panel-simple.c               | 54 ++++++++++++++++++

The dts files should really be sent only after above bindings doc and driver changes get merged first.

Shawn

author
#11 lore raw
Quoted 15 lines · Shawn Guo
Quoted 14 lines · Jagan Teki

Series adda LVDS panel attributes on panel drivers instead of defining them in dts nodes, and also added new icorem6 engicam boards.

Jagan Teki (7):
drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
ARM: dts: imx6dl-icore: Add LVDS node
drm/panel: simple: Add support for KEO TX31D200VM0BAA
ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
initial support
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
support

Quoted 7 lines
Quoted 2 lines
 .../display/panel/ampire,am-800480aytzqw-00h.txt   | 25 +++++++++
 .../bindings/display/panel/koe,tx31d200vm0baa.txt  | 25 +++++++++

...

Quoted 1 line
 drivers/gpu/drm/panel/panel-simple.c               | 54 ++++++++++++++++++

The dts files should really be sent only after above bindings doc and driver changes get merged first.

OK, I will send drm/panel changes first.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html