libseccomp: update to 2.3.3
PATCH 1/12 libseccomp: update to 2.3.3
Drop git PV for bb reciped PV.
supports 4.15 kernel
---
recipes-security/libseccomp/{libseccomp.bb => libseccomp_2.3.3.bb} | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
rename recipes-security/libseccomp/{libseccomp.bb => libseccomp_2.3.3.bb} (94%)recipes-security/libseccomp/libseccomp_2.3.3.bb renamed from recipes-security/libseccomp/libseccomp.bb +1 -3
@@ -4,9 +4,7 @@ SECTION = "security" LICENSE = "LGPL-2.1" LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" -SRCREV = "2331d104bc0cbde5f6c54e504a038e52bfe8e12d" - -PV = "2.3.2+git${SRCPV}" +SRCREV = "74b190e1aa05f07da0c61fb9a30dbc9c18ce2c9d" SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.3 \ file://run-ptest \
Signature · 1 line
2.7.4
PATCH 2/12 tripwire: Update to 2.4.3.6
---
recipes-security/tripwire/{tripwire_2.4.3.5.bb => tripwire_2.4.3.6.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-security/tripwire/{tripwire_2.4.3.5.bb => tripwire_2.4.3.6.bb} (96%)recipes-security/tripwire/tripwire_2.4.3.6.bb renamed from recipes-security/tripwire/tripwire_2.4.3.5.bb +1 -2
@@ -6,7 +6,7 @@ SECTION = "security Monitor/Admin" LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=1c069be8dbbe48e89b580ab4ed86c127" -SRCREV = "7af2781a19af31a41a259f3cce158003a3a0a72f" +SRCREV = "80db91b4c1ca4be9efafd2286e3b2ad32ba4c34c" SRC_URI = "\ git://github.com/Tripwire/tripwire-open-source.git \
@@ -17,7 +17,6 @@ SRC_URI = "\ file://twinstall.sh \ file://twpol-yocto.txt \ " -#PV = "2.4.3.5+git${SRCPV}" S = "${WORKDIR}/git"
Signature · 1 line
2.7.4
PATCH 3/12 scapy: update to 2.3.3
In reply to Armin KusterDrop patch included in update.
---
.../scapy/scapy/scapy-Pickling-issues-fixed.patch | 111 ---------------------
.../scapy/{scapy_2.3.2.bb => scapy_2.3.3.bb} | 5 +-
2 files changed, 2 insertions(+), 114 deletions(-)
delete mode 100644 recipes-security/scapy/scapy/scapy-Pickling-issues-fixed.patch
rename recipes-security/scapy/{scapy_2.3.2.bb => scapy_2.3.3.bb} (88%)recipes-security/scapy/scapy/scapy-Pickling-issues-fixed.patch deleted +0 -111
@@ -1,111 +0,0 @@ -From 331dff6c73f89307d108f9ae89264b9548e22dc6 Mon Sep 17 00:00:00 2001 -From: Guillaume Valadon <[email protected]> -Date: Wed, 31 Aug 2016 13:59:21 +0200 -Subject: [PATCH] Pickling issues fixed - -Backport from: -https://github.com/secdev/scapy/pull/284 - -Upstream-Status: Backport - -Signed-off-by: Jackie Huang <[email protected]> ---- - scapy/layers/inet.py | 6 ++++-- - scapy/layers/inet6.py | 4 +++- - scapy/layers/l2.py | 14 +++++++++----- - scapy/route.py | 1 - - 4 files changed, 16 insertions(+), 9 deletions(-) - -diff --git a/scapy/layers/inet.py b/scapy/layers/inet.py -index 4b66946..e35a247 100644 ---- a/scapy/layers/inet.py -+++ b/scapy/layers/inet.py -@@ -734,8 +734,10 @@ conf.l3types.register(ETH_P_IP, IP) - conf.l3types.register_num2layer(ETH_P_ALL, IP) - - --conf.neighbor.register_l3(Ether, IP, lambda l2,l3: getmacbyip(l3.dst)) --conf.neighbor.register_l3(Dot3, IP, lambda l2,l3: getmacbyip(l3.dst)) -+def inet_register_l3(l2, l3): -+ return getmacbyip(l3.dst) -+conf.neighbor.register_l3(Ether, IP, inet_register_l3) -+conf.neighbor.register_l3(Dot3, IP, inet_register_l3) - - - ################### -diff --git a/scapy/layers/inet6.py b/scapy/layers/inet6.py -index ba5674c..195ca9c 100644 ---- a/scapy/layers/inet6.py -+++ b/scapy/layers/inet6.py -@@ -474,7 +474,9 @@ class IPv6(_IPv6GuessPayload, Packet, IPTools): - return self.payload.answers(other.payload) - - --conf.neighbor.register_l3(Ether, IPv6, lambda l2,l3: getmacbyip6(l3.dst)) -+def inet6_register_l3(l2, l3): -+ return getmacbyip6(l3.dst) -+conf.neighbor.register_l3(Ether, IPv6, inet6_register_l3) - - - class IPerror6(IPv6): -diff --git a/scapy/layers/l2.py b/scapy/layers/l2.py -index 3d88961..47fa386 100644 ---- a/scapy/layers/l2.py -+++ b/scapy/layers/l2.py -@@ -183,8 +183,10 @@ class LLC(Packet): - XByteField("ssap", 0x00), - ByteField("ctrl", 0) ] - --conf.neighbor.register_l3(Ether, LLC, lambda l2,l3: conf.neighbor.resolve(l2,l3.payload)) --conf.neighbor.register_l3(Dot3, LLC, lambda l2,l3: conf.neighbor.resolve(l2,l3.payload)) -+def l2_register_l3(l2, l3): -+ return conf.neighbor.resolve(l2, l3.payload) -+conf.neighbor.register_l3(Ether, LLC, l2_register_l3) -+conf.neighbor.register_l3(Dot3, LLC, l2_register_l3) - - - class CookedLinux(Packet): -@@ -203,7 +205,7 @@ class SNAP(Packet): - fields_desc = [ X3BytesField("OUI",0x000000), - XShortEnumField("code", 0x000, ETHER_TYPES) ] - --conf.neighbor.register_l3(Dot3, SNAP, lambda l2,l3: conf.neighbor.resolve(l2,l3.payload)) -+conf.neighbor.register_l3(Dot3, SNAP, l2_register_l3) - - - class Dot1Q(Packet): -@@ -236,7 +238,7 @@ class Dot1Q(Packet): - return self.sprintf("802.1q (%Dot1Q.type%) vlan %Dot1Q.vlan%") - - --conf.neighbor.register_l3(Ether, Dot1Q, lambda l2,l3: conf.neighbor.resolve(l2,l3.payload)) -+conf.neighbor.register_l3(Ether, Dot1Q, l2_register_l3) - - class STP(Packet): - name = "Spanning Tree Protocol" -@@ -351,7 +353,9 @@ class ARP(Packet): - else: - return self.sprintf("ARP %op% %psrc% > %pdst%") - --conf.neighbor.register_l3(Ether, ARP, lambda l2,l3: getmacbyip(l3.pdst)) -+def l2_register_l3_arp(l2, l3): -+ return getmacbyip(l3.pdst) -+conf.neighbor.register_l3(Ether, ARP, l2_register_l3_arp) - - class GRErouting(Packet): - name = "GRE routing informations" -diff --git a/scapy/route.py b/scapy/route.py -index 52a9562..4bd27b7 100644 ---- a/scapy/route.py -+++ b/scapy/route.py -@@ -20,7 +20,6 @@ from error import Scapy_Exception,warning - class Route: - def __init__(self): - self.resync() -- self.s=socket.socket(socket.AF_INET, socket.SOCK_DGRAM) - self.cache = {} - - def invalidate_cache(self): --- -2.8.3 -
recipes-security/scapy/scapy_2.3.3.bb renamed from recipes-security/scapy/scapy_2.3.2.bb +2 -3
@@ -7,11 +7,10 @@ LIC_FILES_CHKSUM = "file://bin/scapy;beginline=9;endline=13;md5=1d5249872cc54cd4 SRC_URI = "https://github.com/secdev/${BPN}/archive/v${PV}.tar.gz;downloadfilename=${BP}.tar.gz \ file://run-ptest \ - file://scapy-Pickling-issues-fixed.patch \ " -SRC_URI[md5sum] = "00f11df3d6b46fe6ac306efd757486f9" -SRC_URI[sha256sum] = "1b8a86d687feb8ed01114c0c016b428674cbfec04e3eb6f5249a018c427c4f6a" +SRC_URI[md5sum] = "336d6832110efcf79ad30c9856ef5842" +SRC_URI[sha256sum] = "67642cf7b806e02daeddd588577588caebddc3426db7904e7999a0b0334a63b5" inherit setuptools ptest
Signature · 1 line
2.7.4
PATCH 4/12 sssd: update to 1.16.0
In reply to Armin Kusterupdate some PACKAGECONFIG changes
---
recipes-security/sssd/{sssd_1.13.3.bb => sssd_1.16.0.bb} | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
rename recipes-security/sssd/{sssd_1.13.3.bb => sssd_1.16.0.bb} (86%)recipes-security/sssd/sssd_1.16.0.bb renamed from recipes-security/sssd/sssd_1.13.3.bb +5 -4
@@ -11,8 +11,8 @@ DEPENDS += "libldb dbus libtalloc libpcre glib-2.0 popt e2fsprogs libtevent" SRC_URI = "https://releases.pagure.org/SSSD/${BPN}/${BP}.tar.gz\ file://sssd.conf " -SRC_URI[md5sum] = "38bbb24ea9139508cc1d6e402e253244" -SRC_URI[sha256sum] = "3fd8fe8e6ee9f50b33eecd1bcccfaa44791f30d4e5f3113ba91457ba5f411f85" +SRC_URI[md5sum] = "f721ace2ebfa6744cfea55e3ecd2d82f" +SRC_URI[sha256sum] = "c581a6e5365cef87fca419c0c9563cf15eadbb682863d648d85ffcded7a3940f" inherit autotools pkgconfig gettext update-rc.d python-dir
@@ -35,9 +35,10 @@ PACKAGECONFIG[cyrpto] = "--with-crypto=libcrypto, , libcrypto" PACKAGECONFIG[nscd] = "--with-nscd=${sbindir}, --with-nscd=no " PACKAGECONFIG[nl] = "--with-libnl, --with-libnl=no, libnl" PACKAGECONFIG[systemd] = "--with-systemdunitdir=${systemd_unitdir}/system/, --with-systemdunitdir=" -PACKAGECONFIG[systemd] = "--with-systemdconfdir=${systemd_unitdir}/system/, --with-systemdconfdir=" +PACKAGECONFIG[http] = "--with-secrets, --without-secrets, apache2" +PACKAGECONFIG[curl] = "--with-secrets --with-kcm, --without-secrets --without-kcm, curl" -EXTRA_OECONF += "--disable-config-lib --disable-cifs-idmap-plugin --without-nfsv4-idmapd-plugin --without-ipa-getkeytab" +EXTRA_OECONF += "--disable-cifs-idmap-plugin --without-nfsv4-idmapd-plugin --without-ipa-getkeytab" do_configure_prepend() { mkdir -p ${AUTOTOOLS_AUXDIR}/build
Signature · 1 line
2.7.4
PATCH 5/12 smack: update to 1.3.1
In reply to Armin Kusterdrop git hash from PV
Use master branch
---
recipes-security/smack/{smack_1.3.0.bb => smack_1.3.1.bb} | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
rename recipes-security/smack/{smack_1.3.0.bb => smack_1.3.1.bb} (92%)recipes-security/smack/smack_1.3.1.bb renamed from recipes-security/smack/smack_1.3.0.bb +3 -3
@@ -5,13 +5,13 @@ LICENSE = "LGPL-2.1" LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c" -SRCREV = "478f68d182c5070f510482194d3e097b11c21907" +SRCREV = "4a102c7584b39ce693995ffb65e0918a9df98dd8" SRC_URI = " \ - git://github.com/smack-team/smack.git;branch=v1.3.x \ + git://github.com/smack-team/smack.git \ file://smack_generator_make_fixup.patch \ file://run-ptest" -PV = "1.3.0+git${SRCPV}" +PV = "1.3.1" inherit autotools update-rc.d pkgconfig ptest ${@bb.utils.contains('VIRTUAL-RUNTIME_init_manager','systemd','systemd','', d)}
Signature · 1 line
2.7.4
PATCH 6/12 fail2ban: update to 0.10.2
In reply to Armin Kuster---
recipes-security/fail2ban/{fail2ban_0.10.0.bb => fail2ban_0.10.2.bb} | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
rename recipes-security/fail2ban/{fail2ban_0.10.0.bb => fail2ban_0.10.2.bb} (96%)recipes-security/fail2ban/fail2ban_0.10.2.bb renamed from recipes-security/fail2ban/fail2ban_0.10.0.bb +1 -1
@@ -9,7 +9,7 @@ HOMEPAGE = "http://www.fail2ban.org" LICENSE = "GPL-2.0" LIC_FILES_CHKSUM = "file://COPYING;md5=ecabc31e90311da843753ba772885d9f" -SRCREV ="c60784540c5307d16cdc136ace5b395961492e73" +SRCREV ="a45488465e0dd547eb8479c0fa9fd577c1837213" SRC_URI = " \ git://github.com/fail2ban/fail2ban.git;branch=0.10 \ file://initd \
Signature · 1 line
2.7.4
PATCH 7/12 xmlsec1: Update to 1.2.25
In reply to Armin Kuster---
recipes-security/xmlsec1/{xmlsec1_1.2.24.bb => xmlsec1_1.2.25.bb} | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
rename recipes-security/xmlsec1/{xmlsec1_1.2.24.bb => xmlsec1_1.2.25.bb} (91%)recipes-security/xmlsec1/xmlsec1_1.2.25.bb renamed from recipes-security/xmlsec1/xmlsec1_1.2.24.bb +2 -2
@@ -20,8 +20,8 @@ SRC_URI = "http://www.aleksey.com/xmlsec/download/${BP}.tar.gz \ file://run-ptest \ " -SRC_URI[md5sum] = "2f4944356b69ea14c18814d9248fbbd8" -SRC_URI[sha256sum] = "99a8643f118bb1261a72162f83e2deba0f4f690893b4b90e1be4f708e8d481cc" +SRC_URI[md5sum] = "dbbef1efc69e61bc4629650205a05b41" +SRC_URI[sha256sum] = "967ca83edf25ccb5b48a3c4a09ad3405a63365576503bf34290a42de1b92fcd2" inherit autotools-brokensep ptest pkgconfig
Signature · 1 line
2.7.4
PATCH 8/12 freediameter: remove package
In reply to Armin Kusterresides in meta-networking now
--- .../freediameter/files/freeDiameter.conf | 250 --------------------- recipes-security/freediameter/files/init | 160 ------------- .../freediameter/files/no_test_run.patch | 12 - .../freediameter/freediameter_1.2.1.bb | 71 ------ 4 files changed, 493 deletions(-) delete mode 100644 recipes-security/freediameter/files/freeDiameter.conf delete mode 100644 recipes-security/freediameter/files/init delete mode 100644 recipes-security/freediameter/files/no_test_run.patch delete mode 100644 recipes-security/freediameter/freediameter_1.2.1.bb
recipes-security/freediameter/files/freeDiameter.conf deleted +0 -250
@@ -1,250 +0,0 @@ -# This is a sample configuration file for freeDiameter daemon. - -# Most of the options can be omitted, as they default to reasonable values. -# Only TLS-related options must be configured properly in usual setups. - -# It is possible to use "include" keyword to import additional files -# e.g.: include "/etc/freeDiameter.d/*.conf" -# This is exactly equivalent as copy & paste the content of the included file(s) -# where the "include" keyword is found. - - -############################################################## -## Peer identity and realm - -# The Diameter Identity of this daemon. -# This must be a valid FQDN that resolves to the local host. -# Default: hostname's FQDN -#Identity = "aaa.koganei.freediameter.net"; - -# The Diameter Realm of this daemon. -# Default: the domain part of Identity (after the first dot). -#Realm = "koganei.freediameter.net"; - -############################################################## -## Transport protocol configuration - -# The port this peer is listening on for incoming connections (TCP and SCTP). -# Default: 3868. Use 0 to disable. -#Port = 3868; - -# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP). -# See TLS_old_method for more information about TLS flavours. -# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter. -# Default: 5868. Use 0 to disable. -#SecPort = 5868; - -# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed -# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the -# CER/CEA exchange on a dedicated secure port. -# This parameter only affects outgoing connections. -# The setting can be also defined per-peer (see Peers configuration section). -# Default: use RFC6733 method with separate port for TLS. -#TLS_old_method; - -# Disable use of TCP protocol (only listen and connect over SCTP) -# Default : TCP enabled -#No_TCP; - -# Disable use of SCTP protocol (only listen and connect over TCP) -# Default : SCTP enabled -#No_SCTP; -# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option. - -# Prefer TCP instead of SCTP for establishing new connections. -# This setting may be overwritten per peer in peer configuration blocs. -# Default : SCTP is attempted first. -#Prefer_TCP; - -# Default number of streams per SCTP associations. -# This setting may be overwritten per peer basis. -# Default : 30 streams -#SCTP_streams = 30; - -############################################################## -## Endpoint configuration - -# Disable use of IP addresses (only IPv6) -# Default : IP enabled -#No_IP; - -# Disable use of IPv6 addresses (only IP) -# Default : IPv6 enabled -#No_IPv6; - -# Specify local addresses the server must bind to -# Default : listen on all addresses available. -#ListenOn = "202.249.37.5"; -#ListenOn = "2001:200:903:2::202:1"; -#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0"; - - -############################################################## -## Server configuration - -# How many Diameter peers are allowed to be connecting at the same time ? -# This parameter limits the number of incoming connections from the time -# the connection is accepted until the first CER is received. -# Default: 5 unidentified clients in paralel. -#ThreadsPerServer = 5; - -############################################################## -## TLS Configuration - -# TLS is managed by the GNUTLS library in the freeDiameter daemon. -# You may find more information about parameters and special behaviors -# in the relevant documentation. -# http://www.gnu.org/software/gnutls/manual/ - -# Credentials of the local peer -# The X509 certificate and private key file to use for the local peer. -# The files must contain PKCS-1 encoded RSA key, in PEM format. -# (These parameters are passed to gnutls_certificate_set_x509_key_file function) -# Default : NO DEFAULT -#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>"; -#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key"; - -# Certificate authority / trust anchors -# The file containing the list of trusted Certificate Authorities (PEM list) -# (This parameter is passed to gnutls_certificate_set_x509_trust_file function) -# The directive can appear several times to specify several files. -# Default : GNUTLS default behavior -#TLS_CA = "<file.PEM>"; - -# Certificate Revocation List file -# The information about revoked certificates. -# The file contains a list of trusted CRLs in PEM format. They should have been verified before. -# (This parameter is passed to gnutls_certificate_set_x509_crl_file function) -# Note: openssl CRL format might have interoperability issue with GNUTLS format. -# Default : GNUTLS default behavior -#TLS_CRL = "<file.PEM>"; - -# GNU TLS Priority string -# This string allows to configure the behavior of GNUTLS key exchanges -# algorithms. See gnutls_priority_init function documentation for information. -# You should also refer to the Diameter required TLS support here: -# http://tools.ietf.org/html/rfc6733#section-13.1 -# Default : "NORMAL" -# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL"; -#TLS_Prio = "NORMAL"; - -# Diffie-Hellman parameters size -# Set the number of bits for generated DH parameters -# Valid value should be 768, 1024, 2048, 3072 or 4096. -# (This parameter is passed to gnutls_dh_params_generate2 function, -# it usually should match RSA key size) -# Default : 1024 -#TLS_DH_Bits = 1024; - -# Alternatively, you can specify a file to load the PKCS#3 encoded -# DH parameters directly from. This accelerates the daemon start -# but is slightly less secure. If this file is provided, the -# TLS_DH_Bits parameters has no effect. -# Default : no default. -#TLS_DH_File = "<file.PEM>"; - - -############################################################## -## Timers configuration - -# The Tc timer of this peer. -# It is the delay before a new attempt is made to reconnect a disconnected peer. -# The value is expressed in seconds. The recommended value is 30 seconds. -# Default: 30 -#TcTimer = 30; - -# The Tw timer of this peer. -# It is the delay before a watchdog message is sent, as described in RFC 3539. -# The value is expressed in seconds. The default value is 30 seconds. Value must -# be greater or equal to 6 seconds. See details in the RFC. -# Default: 30 -#TwTimer = 30; - -############################################################## -## Applications configuration - -# Disable the relaying of Diameter messages? -# For messages not handled locally, the default behavior is to forward the -# message to another peer if any is available, according to the routing -# algorithms. In addition the "0xffffff" application is advertised in CER/CEA -# exchanges. -# Default: Relaying is enabled. -#NoRelay; - -# Number of server threads that can handle incoming messages at the same time. -# Default: 4 -#AppServThreads = 4; - -# Other applications are configured by loaded extensions. - -############################################################## -## Extensions configuration - -# The freeDiameter framework merely provides support for -# Diameter Base Protocol. The specific application behaviors, -# as well as advanced functions, are provided -# by loadable extensions (plug-ins). -# These extensions may in addition receive the name of a -# configuration file, the format of which is extension-specific. -# -# Format: -#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ; -# -# Examples: -#LoadExtension = "extensions/sample.fdx"; -#LoadExtension = "extensions/sample.fdx":"conf/sample.conf"; - -# Extensions are named as follow: -# dict_* for extensions that add content to the dictionary definitions. -# dbg_* for extensions useful only to retrieve more information on the framework execution. -# acl_* : Access control list, to control which peers are allowed to connect. -# rt_* : routing extensions that impact how messages are forwarded to other peers. -# app_* : applications, these extensions usually register callbacks to handle specific messages. -# test_* : dummy extensions that are useful only in testing environments. - - -# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some -# information about some events. This extension does not actually use a configuration file -# but receives directly a parameter in the string passed to the extension. Here are some examples: -## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors. -## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details. -## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages. -# The four digits respectively control: connections, routing decisions, sent/received messages, errors. -# The values for each digit are: -# 0 - default - keep the default behavior -# 1 - quiet - remove any specific log -# 2 - compact - display only a summary of the information -# 4 - full - display the complete information on a single long line -# 8 - tree - display the complete information in an easier to read format spanning several lines. - - -############################################################## -## Peers configuration - -# The local server listens for incoming connections. By default, -# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl). -# -# In addition to incoming connections, the local peer can -# be configured to establish and maintain connections to some -# Diameter nodes and allow connections from these nodes. -# This is achieved with the ConnectPeer directive described below. -# -# Note that the configured Diameter Identity MUST match -# the information received inside CEA, or the connection will be aborted. -# -# Format: -#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ; -# Parameters that can be specified in the peer's parameter list: -# No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method; -# No_TLS; # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions). -# Port = 5868; # The port to connect to -# TcTimer = 30; -# TwTimer = 30; -# ConnectTo = "202.249.37.5"; -# ConnectTo = "2001:200:903:2::202:1"; -# TLS_Prio = "NORMAL"; -# Realm = "realm.net"; # Reject the peer if it does not advertise this realm. -# Examples: -#ConnectPeer = "aaa.wide.ad.jp"; -#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ; -##############################################################
recipes-security/freediameter/files/init deleted +0 -160
160 lines not on this page · raw message
recipes-security/freediameter/files/no_test_run.patch deleted +0 -12
@@ -1,12 +0,0 @@ -Index: freeDiameter-8662db9f6105/tests/CMakeLists.txt -=================================================================== ---- freeDiameter-8662db9f6105.orig/tests/CMakeLists.txt -+++ freeDiameter-8662db9f6105/tests/CMakeLists.txt -@@ -107,7 +107,6 @@ ENDIF(BUILD_APP_ACCT OR ALL_EXTENSIONS) - FOREACH( TEST ${TEST_LIST} ) - ADD_EXECUTABLE(${TEST} ${TEST}.c tests.h ${${TEST}_ADDITIONAL}) - TARGET_LINK_LIBRARIES(${TEST} libfdproto libfdcore ${GNUTLS_LIBRARIES} ${GCRYPT_LIBRARY} ${${TEST}_ADDITIONAL_LIB}) -- ADD_TEST(${TEST} ${EXECUTABLE_OUTPUT_PATH}/${TEST} ${TEST_ARGUMENTS}) - ENDFOREACH( TEST ) - -
recipes-security/freediameter/freediameter_1.2.1.bb deleted +0 -71
71 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 9/12 clamav: update to 0.99.3
In reply to Armin Kusterremoved unused hash checksums
---
recipes-security/clamav/{clamav_0.99.2.bb => clamav_0.99.3.bb} | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
rename recipes-security/clamav/{clamav_0.99.2.bb => clamav_0.99.3.bb} (95%)recipes-security/clamav/clamav_0.99.3.bb renamed from recipes-security/clamav/clamav_0.99.2.bb +2 -5
@@ -8,17 +8,14 @@ DEPENDS = "libtool db libmspack chrpath-replacement-native" LIC_FILES_CHKSUM = "file://COPYING.LGPL;beginline=2;endline=3;md5=4b89c05acc71195e9a06edfa2fa7d092" -SRCREV = "5ceae552829ee65c9ecff8ff303b1f2ddfd11576" +SRCREV = "224f73461a44e278e9fa50ba59f51ee5e64373e0" -SRC_URI = "git://github.com/vrtadmin/clamav-devel;branch=${PV} \ +SRC_URI = "git://github.com/vrtadmin/clamav-devel;branch=rel/0.99 \ file://clamd.conf \ file://freshclam.conf \ file://volatiles.03_clamav \ " -SRC_URI[md5sum] = "61b51a04619aeafd965892a53f86d192" -SRC_URI[sha256sum] = "167bd6a13e05ece326b968fdb539b05c2ffcfef6018a274a10aeda85c2c0027a" - S = "${WORKDIR}/git" LEAD_SONAME = "libclamav.so"
Signature · 1 line
2.7.4
PATCH 10/12 tpm2simulator: update to 138
In reply to Armin Kuster---
.../{tpm2simulator-native_116.bb => tpm2simulator-native_138.bb} | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
rename meta-tpm/recipes-tpm/tpm2simulator/{tpm2simulator-native_116.bb => tpm2simulator-native_138.bb} (78%)meta-tpm/recipes-tpm/tpm2simulator/tpm2simulator-native_138.bb renamed from meta-tpm/recipes-tpm/tpm2simulator/tpm2simulator-native_116.bb +3 -5
@@ -2,21 +2,19 @@ SUMMARY = "TPM 2.0 Simulator Extraction Script" LICENSE = "BSD-2-Clause" LIC_FILES_CHKSUM = "file://LICENSE;md5=1415f7be284540b81d9d28c67c1a6b8b" -DEPENDS += "python" +DEPENDS = "python" -SRCREV = "93dc4412432013ed7bcabd42007754c68f6e362e" +SRCREV = "e45324eba268723d39856111e7933c5c76238481" SRC_URI = "git://github.com/stwagnr/tpm2simulator.git" S = "${WORKDIR}/git" OECMAKE_SOURCEPATH = "${S}/cmake" -PV = "116+git${SRCPV}" - inherit native lib_package cmake EXTRA_OECMAKE = " \ -DCMAKE_BUILD_TYPE=Debug \ - -DSPEC_VERSION=116 \ + -DSPEC_VERSION=138 \ " do_configure_prepend () {
Signature · 1 line
2.7.4
PATCH 11/12 tpm2-abrmd: update to 1.2.0
In reply to Armin Kuster---
.../recipes-tpm/tpm2-abrmd/{tpm2-abrmd_1.1.1.bb => tpm2-abrmd_1.2.0.bb} | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
rename meta-tpm/recipes-tpm/tpm2-abrmd/{tpm2-abrmd_1.1.1.bb => tpm2-abrmd_1.2.0.bb} (97%)meta-tpm/recipes-tpm/tpm2-abrmd/tpm2-abrmd_1.2.0.bb renamed from meta-tpm/recipes-tpm/tpm2-abrmd/tpm2-abrmd_1.1.1.bb +1 -1
@@ -16,7 +16,7 @@ SRC_URI = "\ file://tpm2-abrmd-init.sh \ file://tpm2-abrmd.default \ " -SRCREV = "c2ccda956bf15165770682dd5c578c58ee5fa6e2" +SRCREV = "59ce1008e5fa3bd5a143437b0f7390851fd25bd8" S = "${WORKDIR}/git"
Signature · 1 line
2.7.4
PATCH 12/12 tpm2.0-tss: update to 1.3.0
In reply to Armin Kusterchange recipe to PV style
---
.../tpm2.0-tss/{tpm2.0-tss_git.bb => tpm2.0-tss_1.3.0.bb} | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
rename meta-tpm/recipes-tpm/tpm2.0-tss/{tpm2.0-tss_git.bb => tpm2.0-tss_1.3.0.bb} (81%)meta-tpm/recipes-tpm/tpm2.0-tss/tpm2.0-tss_1.3.0.bb renamed from meta-tpm/recipes-tpm/tpm2.0-tss/tpm2.0-tss_git.bb +9 -6
@@ -6,16 +6,16 @@ SECTION = "tpm" DEPENDS = "autoconf-archive pkgconfig" -SRCREV = "30794affab01598bbacfe1f167be7c068a0c0476" +SRCREV = "b1d9ece8c6bea2e3043943b2edfaebcdca330c38" SRC_URI = " \ - git://github.com/01org/TPM2.0-TSS.git;protocol=git;branch=master;name=TPM2.0-TSS;destsuffix=TPM2.0-TSS \ + git://github.com/tpm2-software/tpm2-tss.git;branch=1.x \ file://ax_pthread.m4 \ " inherit autotools pkgconfig systemd -S = "${WORKDIR}/${@d.getVar('BPN',d).upper()}" +S = "${WORKDIR}/git" do_configure_prepend () { mkdir -p ${S}/m4
@@ -37,19 +37,22 @@ SYSTEMD_PACKAGES = "resourcemgr" SYSTEMD_SERVICE_resourcemgr = "resourcemgr.service" SYSTEMD_AUTO_ENABLE_resourcemgr = "enable" -do_patch[postfuncs] += "fix_systemd_unit" +do_patch[postfuncs] += "${@bb.utils.contains('VIRTUAL-RUNTIME_init_manager','systemd','fix_systemd_unit','', d)}" fix_systemd_unit () { sed -i -e 's;^ExecStart=.*/resourcemgr;ExecStart=${sbindir}/resourcemgr;' ${S}/contrib/resourcemgr.service } do_install_append() { - install -d ${D}${systemd_system_unitdir} - install -m0644 ${S}/contrib/resourcemgr.service ${D}${systemd_system_unitdir}/resourcemgr.service + if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then + install -d ${D}${systemd_system_unitdir} + install -m0644 ${S}/contrib/resourcemgr.service ${D}${systemd_system_unitdir}/resourcemgr.service + fi } PROVIDES = "${PACKAGES}" PACKAGES = " \ ${PN}-dbg \ + ${PN}-doc \ libtss2 \ libtss2-dev \ libtss2-staticdev \
Signature · 1 line
2.7.4