arm: sunxi: Move spl spi sunxi code to mach-sunxi
Subsystems (4)
PATCH 1/1 arm: sunxi: Move spl spi sunxi code to mach-sunxi
This SUNXI variant SPL SPI code doesn't use either SPI or SPL_FLASG subsystems due to size constraints and also placing this code in drivers/mtd/spi will unnecessary build SPI_FLASH code(if defined) which never required, hence moved to arch area.
And also renamed the file according to kconfig which resembles proper name.
--- arch/arm/mach-sunxi/Kconfig | 8 ++++++++ arch/arm/mach-sunxi/Makefile | 1 + .../sunxi_spi_spl.c => arch/arm/mach-sunxi/spl_spi_sunxi.c | 0 drivers/mtd/spi/Kconfig | 13 ------------- drivers/mtd/spi/Makefile | 1 - 5 files changed, 9 insertions(+), 14 deletions(-) rename drivers/mtd/spi/sunxi_spi_spl.c => arch/arm/mach-sunxi/spl_spi_sunxi.c (100%)
arch/arm/mach-sunxi/Kconfig +8 -0
@@ -847,4 +847,12 @@ config SPL_STACK_R_ADDR default 0x2fe00000 if MACH_SUN9I default 0x4fe00000 if MACH_SUN50I +config SPL_SPI_SUNXI + bool "Support for SPI Flash on Allwinner SoCs in SPL" + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I + help + Enable support for SPI Flash. This option allows SPL to read from + sunxi SPI Flash. It uses the same method as the boot ROM, so does + not need any extra configuration. + endif
arch/arm/mach-sunxi/Makefile +1 -0
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o +obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
arch/arm/mach-sunxi/spl_spi_sunxi.c renamed from drivers/mtd/spi/sunxi_spi_spl.c +0 -0
drivers/mtd/spi/Kconfig +0 -13
@@ -135,17 +135,4 @@ config SPI_FLASH_MTD If unsure, say N -if SPL - -config SPL_SPI_SUNXI - bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I - select SPL_SPI_FLASH_SUPPORT - ---help--- - Enable support for SPI Flash. This option allows SPL to read from - sunxi SPI Flash. It uses the same method as the boot ROM, so does - not need any extra configuration. - -endif - endmenu # menu "SPI Flash Support"
drivers/mtd/spi/Makefile +0 -1
@@ -9,7 +9,6 @@ obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o -obj-$(CONFIG_SPL_SPI_SUNXI) += sunxi_spi_spl.o endif obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o spi_flash_ids.o sf.o
Signature · 1 line
2.7.4
PATCH 1/1 arm: sunxi: Move spl spi sunxi code to mach-sunxi
Quoted 9 lines · Jagan Teki
This SUNXI variant SPL SPI code doesn't use either SPI or
SPL_FLASGsubsystems due to size constraints and also placing this code indrivers/mtd/spiwill unnecessary buildSPI_FLASHcode(if defined) which never required, hence moved to arch area.And also renamed the file according to kconfig which resembles proper name.
Signed-off-by Jagan Teki <[email protected]>
Applied to u-boot-spi/master