sprintf in standalone
Hi!
Having problem with the sprintf function, I did the exporting and updating of the files accordantly to the README.standalone. The standalone application seems to compile without error. But once I do the go 40004 I get Alignment Exception and the board resets. If I remove the sprintf line everything works fine.
The reason I'm using the sprintf is to modify the setenv which includes a variable.
I'm using an MPC83xx.
What does the Alignment Exception means?
Signature · 2 lines
View this message in context: http://www.nabble.com/sprintf-in-standalone-tp15182701p15182701.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Hi,
u-boot-users-bounces at lists.sourceforge.net wrote on Wednesday, January 30, 2008 2:56 PM:
Quoted 5 lines
Hi!
Having problem with the sprintf function, I did the exporting and updating
of the files accordantly to the README.standalone. The standalone application seems to compile without error. But once I do the go
Quoted 8 lines
40004 I get
Alignment Exception and the board resets. If I remove the sprintf line everything works fine.
The reason I'm using the sprintf is to modify the setenv which includes a
variable.
I'm using an MPC83xx.
What does the Alignment Exception means?
Maybe 40004 is not the correct entry point. The entry point may change after modifying the standalone application, see:
http://www.denx.de/wiki/view/DULG/MyStandaloneProgramDoesNotWork
Best Regards,
Martin Krause
--
TQ-Systems GmbH
Muehlstrasse 2, Gut Delling, D-82229 Seefeld
Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913
Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl
http://www.tq-group.com
I checked the entry point by using nm, and found it set to 40004. So it's not that.
Quoted 45 lines · Martin Krause
Hi,
u-boot-users-bounces at lists.sourceforge.net wrote on Wednesday, January 30, 2008 2:56 PM:
Quoted 5 lines
Hi!
Having problem with the sprintf function, I did the exporting and updating
of the files accordantly to the README.standalone. The standalone application seems to compile without error. But once I do the goQuoted 8 lines
40004 I get
Alignment Exception and the board resets. If I remove the sprintf line everything works fine.
The reason I'm using the sprintf is to modify the setenv which includes a
variable.
I'm using an MPC83xx.
What does the Alignment Exception means?Maybe 40004 is not the correct entry point. The entry point may change after modifying the standalone application, see:
http://www.denx.de/wiki/view/DULG/MyStandaloneProgramDoesNotWork
Best Regards,
Martin Krause--
TQ-Systems GmbH
Muehlstrasse 2, Gut Delling, D-82229 Seefeld
Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913
Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl
http://www.tq-group.com-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Signature · 2 lines
View this message in context: http://www.nabble.com/sprintf-in-standalone-tp15182701p15207370.html Sent from the Uboot - Users mailing list archive at Nabble.com.