PSR lag fixes
Subsystems (2)
cover PSR lag fixes
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.
With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Dhinakaran Pandiyan (2):
drm/i915/psr: HW tracking for cursor moves to fix lags. drm/i915/psr: Wait for PSR transition to complete before exiting.
Rodrigo Vivi (1):
drm/i915/psr: Use more PSR HW tracking.
drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/intel_drv.h | 3 ++- drivers/gpu/drm/i915/intel_frontbuffer.c | 2 +- drivers/gpu/drm/i915/intel_psr.c | 24 +++++++++++++++++++++++- 5 files changed, 29 insertions(+), 4 deletions(-)
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/3 drm/i915/psr: Use more PSR HW tracking.
From: Rodrigo Vivi <[email protected]>
So far we are using frontbuffer tracking for everything and ignoring that PSR has a HW capable HW tracking for many modern usages of GPU on Core platforms and newer Atom ones.
One reason for that is that we were trying to keep same infrastructure in place for VLV/CHV than the rest of platforms. But also because when this infrastructure was created the front-buffer-tracking origin wasn't that good and stable how it is today after Paulo reworked it to attend FBC cases.
However this PSR implementation without HW tracking died on gen8LP. And newer platforms are starting to demand more HW tracking specially with PSR2 cases in mind.
By disabling and re-enabling PSR totally every time we believe someone is going to change the front buffer content we don't allow PSR HW tracking to do this job and specially compromising the whole idea of PSR2 case where the HW tracking detect only the damaged area and do a partial screen update.
So, from now on, on the platforms that has hw_tracking let's rely more on HW tracking.
This also is the case in used by other drivers and more validated by SV teams. So I hope that this will lead us to less misterious bugs.
v2: Only do this for platform that actually has hw tracking.
v3 from DK
Do this only for flips, small gradual changes are better.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_drv.h | 3 ++- drivers/gpu/drm/i915/intel_frontbuffer.c | 2 +- drivers/gpu/drm/i915/intel_psr.c | 10 +++++++++- 4 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -770,6 +770,7 @@ struct i915_psr {bool y_cord_support;bool colorimetry_support;bool alpm; +bool has_hw_tracking;void (*enable_source)(struct intel_dp *,const struct intel_crtc_state *);
drivers/gpu/drm/i915/intel_drv.h +2 -1
@@ -1860,7 +1860,8 @@ void intel_psr_enable(struct intel_dp *intel_dp,void intel_psr_disable (struct intel_dp *intel_dp,const struct intel_crtc_state *old_crtc_state);void intel_psr_invalidate (struct drm_i915_private *dev_priv, -unsigned frontbuffer_bits); +unsigned frontbuffer_bits, +enum fb_op_origin origin);void intel_psr_flush (struct drm_i915_private *dev_priv,unsigned frontbuffer_bits,enum fb_op_origin origin);
drivers/gpu/drm/i915/intel_frontbuffer.c +1 -1
@@ -79,7 +79,7 @@ void __intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,spin_unlock (&dev_priv->fb_tracking.lock); } -intel_psr_invalidate (dev_priv, frontbuffer_bits); +intel_psr_invalidate (dev_priv, frontbuffer_bits, origin);intel_edp_drrs_invalidate (dev_priv, frontbuffer_bits);intel_fbc_invalidate (dev_priv, frontbuffer_bits, origin); }
drivers/gpu/drm/i915/intel_psr.c +9 -1
@@ -824,6 +824,7 @@ void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,* intel_psr_invalidate - Invalidade PSR * @dev_priv: i915 device * @frontbuffer_bits: frontbuffer plane tracking bits +* @origin: which operation caused the invalidate * * Since the hardware frontbuffer tracking has gaps we need to integrate * with the software frontbuffer tracking. This function gets called every
@@ -833,7 +834,7 @@ void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits." */ void intel_psr_invalidate (struct drm_i915_private *dev_priv, -unsigned frontbuffer_bits) +unsigned frontbuffer_bits,enum fb_op_origin origin) {struct drm_crtc *crtc;enum pipe pipe;
@@ -841,6 +842,9 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; +if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +return ; +mutex_lock (&dev_priv->psr.lock);if (!dev_priv->psr.enabled) {mutex_unlock (&dev_priv->psr.lock);
@@ -881,6 +885,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; +if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +return ; +mutex_lock (&dev_priv->psr.lock);if (!dev_priv->psr.enabled) {mutex_unlock (&dev_priv->psr.lock);
@@ -957,6 +964,7 @@ void intel_psr_init(struct drm_i915_private *dev_priv) dev_priv->psr.activate = vlv_psr_activate; dev_priv->psr.setup_vsc = vlv_psr_setup_vsc; }else { + dev_priv->psr.has_hw_tracking = true; dev_priv->psr.enable_source = hsw_psr_enable_source; dev_priv->psr.disable_source = hsw_psr_disable; dev_priv->psr.enable_sink = hsw_psr_enable_sink;
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/3 drm/i915/psr: HW tracking for cursor moves to fix lags.
In reply to Dhinakaran PandiyanDRM_IOCTL_MODE_CURSOR results in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.
Introduce a new fb_op_origin enum to differentiate these flushes from those originating due to a dirty fbdev buffer and ignore this enum in psr_flush and psr_invalidate.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {
drivers/gpu/drm/i915/i915_gem.c +1 -1
@@ -4141,7 +4141,7 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); +intel_fb_obj_flush (obj,ORIGIN_PINNEDFB );/* It should now be out of any other write domains, and we can update * the domain values for our changes.
drivers/gpu/drm/i915/intel_psr.c +4 -2
@@ -842,7 +842,8 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; -if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +if (dev_priv->psr.has_hw_tracking && + (origin ==ORIGIN_FLIP || origin ==ORIGIN_PINNEDFB ))return ;mutex_lock (&dev_priv->psr.lock);
@@ -885,7 +886,8 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; -if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +if (dev_priv->psr.has_hw_tracking && + (origin ==ORIGIN_FLIP || origin ==ORIGIN_PINNEDFB ))return ;mutex_lock (&dev_priv->psr.lock);
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/3] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoting Dhinakaran Pandiyan (2018-02-12 06:08:04)
Quoted 33 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate these flushes from those originating due to a dirty fbdev buffer and ignore this enum inpsr_flushandpsr_invalidate.Cc Rodrigo Vivi <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 6 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-0
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4142
Quoted 2 lines
drivers/gpu/drm/i915/i915_gem.c +0
-0@@ -4141,7 +4141,7 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */
Well this comment is bogus then. Please do explain what is going on here.
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4144
Quoted 3 lines
drivers/gpu/drm/i915/i915_gem.c +1
-1__i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); +intel_fb_obj_flush (obj,ORIGIN_PINNEDFB );
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/psr: HW tracking for cursor moves to fix lags.
DRM_IOCTL_MODE_CURSOR results in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.
Introduce a new fb_op_origin enum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored in psr_flush and psr_invalidate.
v2: Update comment in i915_gem_object_pin_to_display_plane. (Chris)
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {
drivers/gpu/drm/i915/i915_gem.c +9 -2
@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment); -/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ +/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ +intel_fb_obj_flush (obj,ORIGIN_PINNEDFB );/* It should now be out of any other write domains, and we can update * the domain values for our changes.
drivers/gpu/drm/i915/intel_psr.c +4 -2
@@ -842,7 +842,8 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; -if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +if (dev_priv->psr.has_hw_tracking && + (origin ==ORIGIN_FLIP || origin ==ORIGIN_PINNEDFB ))return ;mutex_lock (&dev_priv->psr.lock);
@@ -885,7 +886,8 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,if (!CAN_PSR (dev_priv))return ; -if (dev_priv->psr.has_hw_tracking && origin ==ORIGIN_FLIP ) +if (dev_priv->psr.has_hw_tracking && + (origin ==ORIGIN_FLIP || origin ==ORIGIN_PINNEDFB ))return ;mutex_lock (&dev_priv->psr.lock);
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 41 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-1@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment); -/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem.c +8
-1+/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/
So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4151
Quoted 1 line
drivers/gpu/drm/i915/i915_gem.c +1
-0+intel_fb_obj_flush (obj,ORIGIN_PINNEDFB );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoted 41 lines · Chris Wilson
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 40 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-0@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment);
Quoted 16 lines
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 11 lines
drivers/gpu/drm/i915/i915_gem.c +8
-2-/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ +/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
Because the hardware requires a write to one of the pipe registers. When applications write to the buffer via fbdev, it doesn't lead to pipe MMIO write and hence does not benefit from HW triggered PSR exit.
Quoted 5 lines
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4151
Quoted 1 line
drivers/gpu/drm/i915/i915_gem.c +1
-0+intel_fb_obj_flush (obj,ORIGIN_PINNEDFB );_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoting Pandiyan, Dhinakaran (2018-02-13 22:10:48)
Quoted 62 lines · Chris Wilson
Quoted 41 lines
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 40 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-0@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment);Quoted 16 lines
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 11 lines
drivers/gpu/drm/i915/i915_gem.c +8
-2-/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ +/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
Quoted 3 lines
Because the hardware requires a write to one of the pipe registers. When applications write to the buffer via fbdev, it doesn't lead to pipe MMIO write and hence does not benefit from HW triggered PSR exit.
Somewhere you have to have that explanation, that you rely on a subsequent mmioflip of the framebuffer to trigger the frontbuffer flush. That probably also deserves lifting out of pin_to_display_plane as currently there's no requirement that pin_to_display is followed by a flip.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoted 63 lines · Chris Wilson
Quoting Pandiyan, Dhinakaran (2018-02-13 22:10:48)
Quoted 62 lines · Chris Wilson
Quoted 57 lines
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 41 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-1@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment); -/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem.c +8
-1+/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
Quoted 6 lines
Quoted 3 lines
Because the hardware requires a write to one of the pipe registers. When applications write to the buffer via fbdev, it doesn't lead to pipe MMIO write and hence does not benefit from HW triggered PSR exit.
Somewhere you have to have that explanation, that you rely on a subsequent mmioflip of the framebuffer to trigger the frontbuffer flush.
(quoted diff) +0 -0
b/drivers/gpu/drm/i915/i915_gem.c
index 405acf3562de..c669fef5d388 100644
drivers/gpu/drm/i915/i915_gem.c +0 -0
@@ -4071,9 +4071,13 @@ int i915_gem_set_caching_ioctl(struct drm_device
*dev, void *data,
}
/*
- * Prepare buffer for display plane (scanout, cursors, etc).
- * Can be called from an uninterruptible phase (modesetting) and allows
- * any flushes to be pipelined (for pageflips).
+ * Prepare buffer for display plane (scanout, cursors, etc). Can be called from
+ * an uninterruptible phase (modesetting) and allows any flushes to be pipelined
+ * (for pageflips). We only flush the caches while preparing the buffer for
+ * display and this may not lead to the buffer being scanned out if
+ * intel_fb_obj_flush() consumers ignore ORIGIN_PINNEDFB. This is useful because
+ * features like PSR can delegate the flush to HW, which gets triggered when
+ * flip or cursor move MMIO's are written to.
*/
struct i915_vma * i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
Like this?
Quoted 3 lines
That probably also deserves lifting out of
pin_to_display_planeas currently there's no requirement thatpin_to_displayis followed by a flip.
Does pin_to_display imply ready to scan out? And I didn't get the part about "lifting out of pin_to_display_plane"
-DK
Quoted 1 line
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoting Pandiyan, Dhinakaran (2018-02-13 22:45:55)
Quoted 109 lines · Chris Wilson
Quoted 69 lines
Quoting Pandiyan, Dhinakaran (2018-02-13 22:10:48)
Quoted 62 lines · Chris Wilson
Quoted 41 lines
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 40 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-0@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment);Quoted 16 lines
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 11 lines
drivers/gpu/drm/i915/i915_gem.c +8
-2-/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ +/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
Quoted 3 lines
Because the hardware requires a write to one of the pipe registers. When applications write to the buffer via fbdev, it doesn't lead to pipe MMIO write and hence does not benefit from HW triggered PSR exit.
Somewhere you have to have that explanation, that you rely on a subsequent mmioflip of the framebuffer to trigger the frontbuffer flush.
drivers/gpu/drm/i915/i915_gem.c +1
-3@@ -4071,9 +4071,13 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data, }/* -* Prepare buffer for display plane (scanout, cursors, etc). -* Can be called from an uninterruptible phase (modesetting) and allows -* any flushes to be pipelined (for pageflips). +* Prepare buffer for display plane (scanout, cursors, etc). Can be called from
+ * an uninterruptible phase (modesetting) and allows any flushes to be pipelined
+ * (for pageflips). We only flush the caches while preparing the buffer for
+ * display and this may not lead to the buffer being scanned out if
+ *intel_fb_obj_flush()consumers ignoreORIGIN_PINNEDFB. This is useful because
+ * features like PSR can delegate the flush to HW, which gets triggered when
+ * flip or cursor move MMIO's are written to.
*/
structi915_vma* i915_gem_object_pin_to_display_plane(structdrm_i915_gem_object*obj,Like this?
Quoted 6 lines
Quoted 3 lines
That probably also deserves lifting out of
pin_to_display_planeas currently there's no requirement thatpin_to_displayis followed by a flip.Does
pin_to_displayimply ready to scan out? And I didn't get the part about "lifting out ofpin_to_display_plane"
Nothing about flushing the GEM caches for coherency with the display engine imply how it will be used. Since PINNEDFB only works if the caller follows it with a mmioflip, it should be moved to the caller or that information passed in.
So how is PINNEDFB different from FLIP? Once you move it to the callers, doesn't it just reduce to FLIP in the cases where you want to treat it as FLIP and DIRTYFB in the others?
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2] drm/i915/psr: HW tracking for cursor moves to fix lags.
Quoted 117 lines · Chris Wilson
Quoting Pandiyan, Dhinakaran (2018-02-13 22:45:55)
Quoted 109 lines · Chris Wilson
Quoted 69 lines
Quoting Pandiyan, Dhinakaran (2018-02-13 22:10:48)
Quoted 62 lines · Chris Wilson
Quoted 41 lines
Quoting Dhinakaran Pandiyan (2018-02-13 21:46:13)
Quoted 40 lines
DRM_IOCTL_MODE_CURSORresults in a frontbuffer flush before the cursor plane MMIOs are written to. But this flush is not necessary for PSR as hardware tracking takes care of exiting PSR when the MMIO's are written.Introduce a new
fb_op_originenum to differentiate flushes due to a BO being pinned from those originating due to a dirty fbdev buffer. Now, this enum can be ignored inpsr_flushandpsr_invalidate.v2: Update comment in
i915_gem_object_pin_to_display_plane. (Chris)Cc Rodrigo Vivi <[email protected]>Cc Ville Syrjälä <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_psr.c | 6 ++++-- 3 files changed, 14 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -637,6 +637,7 @@ enum fb_op_origin {ORIGIN_CS ,ORIGIN_FLIP ,ORIGIN_DIRTYFB , + ORIGIN_PINNEDFB, }; struct intel_fbc {drivers/gpu/drm/i915/i915_gem.c +0
-0@@ -4139,9 +4139,16 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment =max_t (u64, vma->display_alignment, alignment);Quoted 16 lines
drivers/gpu/drm/i915/i915_gem.c i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, · line 4150
Quoted 11 lines
drivers/gpu/drm/i915/i915_gem.c +8
-2-/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() */ +/* Treat this as an end-of-frame, like intel_user_framebuffer_dirty() to +* flush the caches. +*/ __i915_gem_object_flush_for_display (obj); -intel_fb_obj_flush (obj,ORIGIN_DIRTYFB ); + +/* Features like PSR might want to rely on HW to do the frontbuffer +* flush, pass origin as ORIGIN_PINNEDFB rather than ORIGIN_DIRTYFB +* so that their flush implementations can handle it accordingly. +*/ So why it is different? Why can't the dirtyfb ioctl benefit from HW, which the application is meant to call every frame to *all* dirty framebuffers (which include cursors in atomic)?
Quoted 3 lines
Because the hardware requires a write to one of the pipe registers. When applications write to the buffer via fbdev, it doesn't lead to pipe MMIO write and hence does not benefit from HW triggered PSR exit.
Somewhere you have to have that explanation, that you rely on a subsequent mmioflip of the framebuffer to trigger the frontbuffer flush.
drivers/gpu/drm/i915/i915_gem.c +1
-3@@ -4071,9 +4071,13 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data, }/* -* Prepare buffer for display plane (scanout, cursors, etc). -* Can be called from an uninterruptible phase (modesetting) and allows -* any flushes to be pipelined (for pageflips). +* Prepare buffer for display plane (scanout, cursors, etc). Can be called from
+ * an uninterruptible phase (modesetting) and allows any flushes to be pipelined
+ * (for pageflips). We only flush the caches while preparing the buffer for
+ * display and this may not lead to the buffer being scanned out if
+ *intel_fb_obj_flush()consumers ignoreORIGIN_PINNEDFB. This is useful because
+ * features like PSR can delegate the flush to HW, which gets triggered when
+ * flip or cursor move MMIO's are written to.
*/
structi915_vma* i915_gem_object_pin_to_display_plane(structdrm_i915_gem_object*obj,Like this?
Quoted 6 lines
Quoted 3 lines
That probably also deserves lifting out of
pin_to_display_planeas currently there's no requirement thatpin_to_displayis followed by a flip.Does
pin_to_displayimply ready to scan out? And I didn't get the part about "lifting out ofpin_to_display_plane"
Quoted 8 lines
Nothing about flushing the GEM caches for coherency with the display engine imply how it will be used. Since PINNEDFB only works if the caller follows it with a mmioflip, it should be moved to the caller or that information passed in.
So how is PINNEDFB different from FLIP? Once you move it to the callers, doesn't it just reduce to FLIP in the cases where you want to treat it as FLIP and DIRTYFB in the others?
Good point, let me revisit the idea of reusing FLIP now that I have a slightly better understanding of how this is supposed to work.
-DK
Quoted 5 lines
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/3 drm/i915/psr: Wait for PSR transition to complete before exiting.
In reply to Dhinakaran PandiyanWith fbdev, screen freezes after a few continuous PSR exit->enter cycles. Printing out the PSR status register clearly showed this freeze coincided with exiting when the hardware is in a transitory state. So wait for 100 ms (~6 frames) for PSR to become active and then exit.
--- drivers/gpu/drm/i915/intel_psr.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/gpu/drm/i915/intel_psr.c +12 -0
@@ -738,6 +738,18 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)WARN_ON (!(val &EDP_PSR2_ENABLE ));I915_WRITE (EDP_PSR2_CTL , val & ~EDP_PSR2_ENABLE ); }else { + +/* Wait for about 6 frames in case we just enabled PSR, +* this prevents the screen from freezing as the HW does +* not seem to be able to back off cleanly it is already +* trying to enter PSR. +*/ +intel_wait_for_register (dev_priv, +EDP_PSR_STATUS , +EDP_PSR_STATUS_STATE_MASK , +EDP_PSR_STATUS_STATE_SRDENT , +100 ); + val =I915_READ (EDP_PSR_CTL );WARN_ON (!(val &EDP_PSR_ENABLE ));I915_WRITE (EDP_PSR_CTL , val & ~EDP_PSR_ENABLE );
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for PSR lag fixes
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: PSR lag fixes
URL : https://patchwork.freedesktop.org/series/38067/
State : success
== Summary ==
Series 38067v1 PSR lag fixes
https://patchwork.freedesktop.org/api/1.0/series/38067/revisions/1/mbox/
Test debugfs_test:
Subgroup read_all_entries:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-cnl-y3) fdo#103191fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:418s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:423s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:375s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:481s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:286s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:482s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:483s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:469s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:456s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:565s fi-cnl-y3 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:581s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:411s fi-gdg-551 total:288 pass:180 dwarn:0 dfail:0 fail:0 skip:108 time:285s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:508s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:387s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:419s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:446s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:410s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:462s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:496s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:501s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:599s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:432s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:504s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:527s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:488s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:472s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:413s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:431s fi-snb-2520m total:3 pass:2 dwarn:0 dfail:0 fail:0 skip:0 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:394s
Blacklisted hosts:
fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:466s
4d059b70de402af68016510ae19a70c750806159 drm-tip: 2018y-02m-11d-17h-16m-33s UTC integration manifest 949c0e7a3444 drm/i915/psr: Wait for PSR transition to complete before exiting. a084e969804e drm/i915/psr: HW tracking for cursor moves to fix lags.6c0f580e8e39 drm/i915/psr: Use more PSR HW tracking.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7975/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: warning for PSR lag fixes
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: PSR lag fixes
URL : https://patchwork.freedesktop.org/series/38067/
State : warning
== Summary ==
Test perf:
Subgroup oa-exponents:
pass -> FAIL (shard-apl) fdo#102254
Subgroup polling:
fail -> PASS (shard-hsw) fdo#102252
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (shard-snb) fdo#103375
Test kms_frontbuffer_tracking:
Subgroup fbc-rgb565-draw-mmap-cpu:
pass -> SKIP (shard-snb)
Test kms_flip:
Subgroup 2x-flip-vs-absolute-wf_vblank-interruptible:
fail -> PASS (shard-hsw) fdo#100368fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
shard-apl total:3422 pass:1773 dwarn:1 dfail:0 fail:21 skip:1626 time:12416s shard-hsw total:3444 pass:1761 dwarn:1 dfail:0 fail:10 skip:1671 time:11970s shard-snb total:3444 pass:1349 dwarn:2 dfail:0 fail:10 skip:2083 time:6604s
Blacklisted hosts:
shard-kbl total:3444 pass:1899 dwarn:13 dfail:0 fail:25 skip:1507 time:9794s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7975/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 6 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
Quoted 6 lines
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Are there any more PSR fixes in the pipeline? If not I think I should do a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.
I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 14 lines · Hans de Goede
Hi,
Quoted 11 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.
Quoted 5 lines
Quoted 1 line
With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Quoted 9 lines
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 15 lines · Dhinakaran
Quoted 14 lines · Hans de Goede
Hi,
Quoted 11 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/
Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 22 lines · Hans de Goede
Hi,
Quoted 19 lines · Dhinakaran
Quoted 18 lines · Hans de Goede
Hi,
Quoted 6 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
Quoted 6 lines
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Hi Hans,
Thanks for your patience and help. I believe the current drm-tip is in a decent shape to retest PSR. Booting with i915.enable_psr = 1 is still needed. The fixes have been mostly developed/tested on gen-9 hardware but they apply to other platforms too.
-DK
Quoted 31 lines
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Quoted 7 lines
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 34 lines · Dhinakaran
Quoted 22 lines · Hans de Goede
Hi,
Quoted 19 lines · Dhinakaran
Quoted 18 lines · Hans de Goede
Hi,
Quoted 6 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
Quoted 6 lines
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Quoted 6 lines
Hi Hans,
Thanks for your patience and help. I believe the current drm-tip is in a decent shape to retest PSR. Booting with i915.enable_psr = 1 is still needed. The fixes have been mostly developed/tested on gen-9 hardware but they apply to other platforms too.
Cool, thank you. Current drm-tip will all be merged into 4.17-rc1, right?
Then I think I will just wait for that, most distros already provide rc builds for testing, so that way it will be easy for people to test.
Regards,
Hans
Quoted 41 lines
-DK
Quoted 38 lines
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 37 lines · Hans de Goede
Hi,
Quoted 34 lines · Dhinakaran
Quoted 31 lines · Hans de Goede
Hi,
Quoted 15 lines · Dhinakaran
Quoted 14 lines · Hans de Goede
Hi,
Quoted 11 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.Quoted 8 lines
Quoted 5 lines
Quoted 1 line
With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Quoted 8 lines
Quoted 6 lines
Hi Hans,
Thanks for your patience and help. I believe the current drm-tip is in a decent shape to retest PSR. Booting with i915.enable_psr = 1 is still needed. The fixes have been mostly developed/tested on gen-9 hardware but they apply to other platforms too.
Cool, thank you. Current drm-tip will all be merged into 4.17-rc1, right?
Rodrigo,
Can you help me answer that?
Quoted 52 lines
Then I think I will just wait for that, most distros already provide rc builds for testing, so that way it will be easy for people to test.
Regards,
Hans
Quoted 41 lines
-DK
Quoted 38 lines
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 41 lines · Dhinakaran
Quoted 37 lines · Hans de Goede
Hi,
Quoted 34 lines · Dhinakaran
Quoted 31 lines · Hans de Goede
Hi,
Quoted 15 lines · Dhinakaran
Quoted 14 lines · Hans de Goede
Hi,
Quoted 11 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.Quoted 8 lines
Quoted 5 lines
Quoted 1 line
With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
Hi Hans,
Thanks for your patience and help. I believe the current drm-tip is in a decent shape to retest PSR. Booting with i915.enable_psr = 1 is still needed. The fixes have been mostly developed/tested on gen-9 hardware but they apply to other platforms too.
Cool, thank you. Current drm-tip will all be merged into 4.17-rc1, right?
Unfortunately no. All changes current in dinq and not on drm-intel-next are only going to 4.18-rc1.
Quoted 62 lines
Rodrigo,
Can you help me answer that?
Quoted 56 lines
Then I think I will just wait for that, most distros already provide rc builds for testing, so that way it will be easy for people to test.
Regards,
Hans
Quoted 41 lines
-DK
Quoted 38 lines
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 49 lines · Rodrigo Vivi
Quoted 48 lines · Dhinakaran
Quoted 44 lines · Hans de Goede
Hi,
Quoted 40 lines · Dhinakaran
Quoted 22 lines · Hans de Goede
Hi,
Quoted 19 lines · Dhinakaran
Quoted 18 lines · Hans de Goede
Hi,
Quoted 6 lines · Dhinakaran Pandiyan
PSR currently when enabled results in semi-permanent freezes or noticeable cursor lags.
https://patchwork.freedesktop.org/series/37598/ will fix long freezes due to frame counter resets.
Quoted 6 lines
This series has three more fixes -
Patch 1 eliminates PSR exit for flips and makes us rely on the HW to do it. Patch 2 fixes cusor move lag by relying on HW to exit PSR. Patch 3 fixes temporary freeze seen with fbdev.With both the series applied, PSR on my SKL ThinkPad feels pretty good.
Thank you for your great work on this.
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
Are there any more PSR fixes in the pipeline?
Yeah, there are a few more fixes that I hope will appear on the list in the next two weeks or so.
Ok, can you send a mail when you're done (in sofar any software is ever "done") and you would like me to ask all people who have been kind enough to test PSR to retest ?
Hi Hans,
Thanks for your patience and help. I believe the current drm-tip is in a decent shape to retest PSR. Booting with i915.enable_psr = 1 is still needed. The fixes have been mostly developed/tested on gen-9 hardware but they apply to other platforms too.
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Cool, thank you. Current drm-tip will all be merged into 4.17-rc1, right?
Unfortunately no. All changes current in dinq and not on drm-intel-next are only going to 4.18-rc1.
Bummer.
Pandiyan, can you make a list of commits or patch-work series links which contain the PSR related fixes? Then I will try to backport those to 4.16 (when I find time for this).
Regards,
Hans
Quoted 59 lines
Quoted 59 lines
Rodrigo,
Can you help me answer that?
Quoted 52 lines
Then I think I will just wait for that, most distros already provide rc builds for testing, so that way it will be easy for people to test.
Regards,
Hans
Quoted 41 lines
-DK
Quoted 38 lines
Quoted 23 lines
Quoted 8 lines
If not I think I should do
a custom Fedora kernel build based on 4.15 + recent fixes and ask all my testers to retest with that.I do have some questions before I do this:
1) I believe that only testers with skylake (normal or LP) or newer should re-test, correct?
These fixes do apply for HSW/BDW, so essentially all the big cores supporting PSR. But, HSW/BDW need fixes for AUX channel-PSR interaction also. I haven't looked into CHV/VLV.
Quoted 5 lines
2) I know there are 2 series (including this one), can someone provide a link to the latest patchwork version of those 2 series, or even better a git branch with 4.15 + those patches? Any patches I'm missing if I pick up these 2 series?
https://patchwork.freedesktop.org/series/37598/
https://patchwork.freedesktop.org/series/38067/Quoted 5 lines
Quoted 2 lines
3) I'm thinking 4.15 atm, but I could also do a 4.16-rc1 test kernel instead if that would be better, would that be better ?
I can't think of any diff that would affect PSR, but the latest is better I suppose.
Ok.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for PSR lag fixes (rev2)
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: PSR lag fixes (rev2)
URL : https://patchwork.freedesktop.org/series/38067/
State : failure
== Summary ==
Series 38067v2 PSR lag fixes
https://patchwork.freedesktop.org/api/1.0/series/38067/revisions/2/mbox/
Test kms_busy:
Subgroup basic-flip-b:
pass -> INCOMPLETE (fi-cnl-y3)fi-bdw-5557u total:288 pass:265 dwarn:0 dfail:0 fail:2 skip:21 time:441s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:430s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:378s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:491s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:293s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:486s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:474s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:461s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:569s fi-cnl-y3 total:197 pass:185 dwarn:0 dfail:0 fail:0 skip:11 fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:424s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:296s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:513s fi-hsw-4770 total:288 pass:259 dwarn:0 dfail:0 fail:2 skip:27 time:411s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:413s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:461s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:415s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:462s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:496s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:501s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:601s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:430s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:506s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:528s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:495s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:483s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:418s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:433s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:541s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:400s Blacklisted hosts: fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:469s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:457s
55dfdd18a566b5c632cbb34086b2a03410e810fb drm-tip: 2018y-02m-13d-18h-37m-11s UTC integration manifest 558a92e3776e drm/i915/psr: Wait for PSR transition to complete before exiting. 9d920a6e7906 drm/i915/psr: HW tracking for cursor moves to fix lags.085f2a67eebd drm/i915/psr: Use more PSR HW tracking.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8000/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx