Skip to contentSkip to conversation

rsi: add bluetooth and coex support

PATCH Superseded Amitkumar Karwar 1 participant 9 messages Feb 13, 2018

Subsystems (3)

v6 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v6 cover rsi: add bluetooth and coex support

From: Amitkumar Karwar <[email protected]>

This patch series adds new bluetooth driver and coex enhancments in existing wlan driver for RSI chipsets.
As per our architecture, both wlan and bluetooth drivers talk over same SDIO interface to device. Separate endpoint will be used in case of USB interface.

Changes in v6: 1/8, 3/8, 4/8, 5/8, 6/8 are modified Changes in v5: 5/8 is modified
Changes in v4: 5/8 is modified
Changes in v3: 4/8, 5/8 and 6/8 patches are modified Changes in v2: 2/8, 5/8 and 6/8 patches are modified

Prameela Rani Garnepudi (6):
rsi: add rx control block to handle rx packets in USB
rsi: add header file rsi_91x
rsi: add coex support
Bluetooth: btrsi: add new rsi bluetooth driver
rsi: add module parameter operating mode
rsi: sdio changes to support BT

Siva Rebbagondla (2):
rsi: add bluetooth rx endpoint
rsi: handle BT traffic in driver

 drivers/bluetooth/Kconfig                   |  12 ++
 drivers/bluetooth/Makefile                  |   2 +
 drivers/bluetooth/btrsi.c                   | 188 ++++++++++++++++++++++++++++
 drivers/net/wireless/rsi/Kconfig            |   9 ++
 drivers/net/wireless/rsi/Makefile           |   1 +
 drivers/net/wireless/rsi/rsi_91x_coex.c     | 179 ++++++++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_core.c     |  20 ++-
 drivers/net/wireless/rsi/rsi_91x_hal.c      |  56 +++++++--
 drivers/net/wireless/rsi/rsi_91x_main.c     | 129 ++++++++++++++++++-
 drivers/net/wireless/rsi/rsi_91x_mgmt.c     |   2 +-
 drivers/net/wireless/rsi/rsi_91x_sdio.c     |  13 +-
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |   5 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c      | 124 +++++++++++++-----
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c  |  35 ++++--
 drivers/net/wireless/rsi/rsi_coex.h         |  38 ++++++
 drivers/net/wireless/rsi/rsi_common.h       |   5 +-
 drivers/net/wireless/rsi/rsi_hal.h          |  21 ++++
 drivers/net/wireless/rsi/rsi_main.h         |  20 +--
 drivers/net/wireless/rsi/rsi_mgmt.h         |   3 +
 drivers/net/wireless/rsi/rsi_usb.h          |  16 ++-
 include/net/rsi_91x.h                       |  56 +++++++++
 21 files changed, 852 insertions(+), 82 deletions(-)
 create mode 100644 drivers/bluetooth/btrsi.c
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_coex.c
 create mode 100644 drivers/net/wireless/rsi/rsi_coex.h
 create mode 100644 include/net/rsi_91x.h
Signature · 1 line
2.7.4
#1 lore raw

PATCH v6 1/8 rsi: add rx control block to handle rx packets in USB

From: Prameela Rani Garnepudi <[email protected]>

Rx bluetooth endpoint shall be added in further patches. Rx control block is introduced here to handle Rx packets properly. Separate function is written to initialize the RX control blocks.

---
v6: Removed unnecessary GFP_DMA flag for kzalloc(Kalle)
v5: Same as earlier version

---
 drivers/net/wireless/rsi/rsi_91x_main.c     |  4 +-
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |  2 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c      | 75 +++++++++++++++++++++++------
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c  | 35 +++++++++-----
 drivers/net/wireless/rsi/rsi_common.h       |  2 +-
 drivers/net/wireless/rsi/rsi_main.h         |  2 +-
 drivers/net/wireless/rsi/rsi_usb.h          | 10 +++-
 7 files changed, 96 insertions(+), 34 deletions(-)
drivers/net/wireless/rsi/rsi_91x_main.c +2 -2
index 0cb8e68..0413af8 100644
@@ -137,7 +137,7 @@ static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
  *
  * Return: 0 on success, -1 on failure.
  */
-int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len)
+int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 {
 	u8 *frame_desc = NULL, extended_desc = 0;
 	u32 index, length = 0, queueno = 0;
@@ -146,7 +146,7 @@ int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len)
 
 	index = 0;
 	do {
-		frame_desc = &common->rx_data_pkt[index];
+		frame_desc = &rx_pkt[index];
 		actual_length = *(u16 *)&frame_desc[0];
 		offset = *(u16 *)&frame_desc[2];
 
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c +1 -1
index 8e2a95c..9fbc0ef 100644
@@ -118,7 +118,7 @@ static int rsi_process_pkt(struct rsi_common *common)
 		goto fail;
 	}
 
-	status = rsi_read_pkt(common, rcv_pkt_len);
+	status = rsi_read_pkt(common, common->rx_data_pkt, rcv_pkt_len);
 
 fail:
 	kfree(common->rx_data_pkt);
drivers/net/wireless/rsi/rsi_91x_usb.c +59 -16

137 lines not on this page · raw message

drivers/net/wireless/rsi/rsi_91x_usb_ops.c +23 -12
index 465692b..d0650ea 100644
@@ -29,7 +29,8 @@ void rsi_usb_rx_thread(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
-	int status;
+	struct rx_usb_ctrl_block *rx_cb;
+	int status, idx;
 
 	do {
 		rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
@@ -37,20 +38,30 @@ void rsi_usb_rx_thread(struct rsi_common *common)
 		if (atomic_read(&dev->rx_thread.thread_done))
 			goto out;
 
-		mutex_lock(&common->rx_lock);
-		status = rsi_read_pkt(common, 0);
-		if (status) {
-			rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
+		for (idx = 0; idx < MAX_RX_URBS; idx++) {
+			rx_cb = &dev->rx_cb[idx];
+			if (!rx_cb->pend)
+				continue;
+
+			mutex_lock(&common->rx_lock);
+			status = rsi_read_pkt(common, rx_cb->rx_buffer, 0);
+			if (status) {
+				rsi_dbg(ERR_ZONE, "%s: Failed To read data",
+					__func__);
+				mutex_unlock(&common->rx_lock);
+				break;
+			}
+			rx_cb->pend = 0;
 			mutex_unlock(&common->rx_lock);
-			return;
+
+			if (adapter->rx_urb_submit(adapter, rx_cb->ep_num)) {
+				rsi_dbg(ERR_ZONE,
+					"%s: Failed in urb submission",
+					__func__);
+				return;
+			}
 		}
-		mutex_unlock(&common->rx_lock);
 		rsi_reset_event(&dev->rx_thread.event);
-		if (adapter->rx_urb_submit(adapter)) {
-			rsi_dbg(ERR_ZONE,
-				"%s: Failed in urb submission", __func__);
-			return;
-		}
 	} while (1);
 
 out:
drivers/net/wireless/rsi/rsi_common.h +1 -1
index d07dbba..1d8af41 100644
@@ -82,7 +82,7 @@ void rsi_mac80211_detach(struct rsi_hw *hw);
 u16 rsi_get_connected_channel(struct ieee80211_vif *vif);
 struct rsi_hw *rsi_91x_init(void);
 void rsi_91x_deinit(struct rsi_hw *adapter);
-int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len);
+int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len);
 #ifdef CONFIG_PM
 int rsi_config_wowlan(struct rsi_hw *adapter, struct cfg80211_wowlan *wowlan);
 #endif
drivers/net/wireless/rsi/rsi_main.h +1 -1
index 8cab630..ee469dc 100644
@@ -343,7 +343,7 @@ struct rsi_hw {
 	void *rsi_dev;
 	struct rsi_host_intf_ops *host_intf_ops;
 	int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num);
-	int (*rx_urb_submit)(struct rsi_hw *adapter);
+	int (*rx_urb_submit)(struct rsi_hw *adapter, u8 ep_num);
 	int (*determine_event_timeout)(struct rsi_hw *adapter);
 };
 
drivers/net/wireless/rsi/rsi_usb.h +9 -1
index 891daea..7e781d5 100644
@@ -39,12 +39,20 @@
 #define RSI_USB_BUF_SIZE	     4096
 #define RSI_USB_CTRL_BUF_SIZE	     0x04
 
+struct rx_usb_ctrl_block {
+	u8 *data;
+	struct urb *rx_urb;
+	u8 *rx_buffer;
+	u8 ep_num;
+	u8 pend;
+};
+
 struct rsi_91x_usbdev {
 	struct rsi_thread rx_thread;
 	u8 endpoint;
 	struct usb_device *usbdev;
 	struct usb_interface *pfunction;
-	struct urb *rx_usb_urb[MAX_RX_URBS];
+	struct rx_usb_ctrl_block rx_cb[MAX_RX_URBS];
 	u8 *tx_buffer;
 	__le16 bulkin_size;
 	u8 bulkin_endpoint_addr;
Signature · 1 line
2.7.4
#2 lore raw

PATCH v6 2/8 rsi: add bluetooth rx endpoint

In reply to Amitkumar Karwar

From: Siva Rebbagondla <[email protected]>

USB endpoint 1 is used for WLAN which is presently in use. USB endpoint 2 is introduced for BT Rx traffic. Enumeration of Rx BT endpoint and submitting Rx BT URB are added.

Quoted 1 line

From /sys/kernel/debug/usb/devices,

Ad=81(I) is for WLAN EP IN and Ad=01(O) is for Wlan EP OUT. Ad=82(I) is for BT EP IN and Ad=02(O) is for BT EP OUT.

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1618 ProdID=9113 Rev= 0.02
S:  Manufacturer=Redpine Signals, Inc.
S:  Product=Wireless USB Network Module
S:  SerialNumber=000000000001
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 6 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
v6: Same as v2, v3, v4, v5
v2: Included '/sys/kernel/debug/usb/devices' info in patch description(Marcel)

---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 37 ++++++++++++++++++++--------------
 drivers/net/wireless/rsi/rsi_usb.h     |  6 +++---
 2 files changed, 25 insertions(+), 18 deletions(-)
drivers/net/wireless/rsi/rsi_91x_usb.c +22 -15
index bbce809..9ab86fb 100644
@@ -103,41 +103,42 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
 	struct usb_host_interface *iface_desc;
 	struct usb_endpoint_descriptor *endpoint;
 	__le16 buffer_size;
-	int ii, bep_found = 0;
+	int ii, bin_found = 0, bout_found = 0;
 
 	iface_desc = &(interface->altsetting[0]);
 
 	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
 		endpoint = &(iface_desc->endpoint[ii].desc);
 
-		if ((!(dev->bulkin_endpoint_addr)) &&
+		if (!dev->bulkin_endpoint_addr[bin_found] &&
 		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
-		    ((endpoint->bmAttributes &
-		    USB_ENDPOINT_XFERTYPE_MASK) ==
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
 		    USB_ENDPOINT_XFER_BULK)) {
 			buffer_size = endpoint->wMaxPacketSize;
-			dev->bulkin_size = buffer_size;
-			dev->bulkin_endpoint_addr =
+			dev->bulkin_size[bin_found] = buffer_size;
+			dev->bulkin_endpoint_addr[bin_found] =
 				endpoint->bEndpointAddress;
+			bin_found++;
 		}
 
-		if (!dev->bulkout_endpoint_addr[bep_found] &&
+		if (!dev->bulkout_endpoint_addr[bout_found] &&
 		    !(endpoint->bEndpointAddress & USB_DIR_IN) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		      USB_ENDPOINT_XFER_BULK)) {
-			dev->bulkout_endpoint_addr[bep_found] =
+		    USB_ENDPOINT_XFER_BULK)) {
+			buffer_size = endpoint->wMaxPacketSize;
+			dev->bulkout_endpoint_addr[bout_found] =
 				endpoint->bEndpointAddress;
 			buffer_size = endpoint->wMaxPacketSize;
-			dev->bulkout_size[bep_found] = buffer_size;
-			bep_found++;
+			dev->bulkout_size[bout_found] = buffer_size;
+			bout_found++;
 		}
 
-		if (bep_found >= MAX_BULK_EP)
+		if (bin_found >= MAX_BULK_EP || bout_found >= MAX_BULK_EP)
 			break;
 	}
 
-	if (!(dev->bulkin_endpoint_addr) &&
-	    (dev->bulkout_endpoint_addr[0]))
+	if (!(dev->bulkin_endpoint_addr[0]) &&
+	    dev->bulkout_endpoint_addr[0])
 		return -EINVAL;
 
 	return 0;
@@ -273,7 +274,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
 	usb_fill_bulk_urb(urb,
 			  dev->usbdev,
 			  usb_rcvbulkpipe(dev->usbdev,
-				dev->bulkin_endpoint_addr),
+			  dev->bulkin_endpoint_addr[ep_num - 1]),
 			  urb->transfer_buffer,
 			  3000,
 			  rsi_rx_done_handler,
@@ -745,6 +746,12 @@ static int rsi_probe(struct usb_interface *pfunction,
 	if (status)
 		goto err1;
 
+	if (adapter->priv->coex_mode > 1) {
+		status = rsi_rx_urb_submit(adapter, BT_EP);
+		if (status)
+			goto err1;
+	}
+
 	return 0;
 err1:
 	rsi_deinit_usb_interface(adapter);
drivers/net/wireless/rsi/rsi_usb.h +3 -3
index 7e781d5..0fda14c 100644
@@ -31,7 +31,7 @@
 #define USB_VENDOR_REGISTER_WRITE    0x16
 #define RSI_USB_TX_HEAD_ROOM         128
 
-#define MAX_RX_URBS                  1
+#define MAX_RX_URBS                  2
 #define MAX_BULK_EP                  8
 #define WLAN_EP                      1
 #define BT_EP                        2
@@ -54,8 +54,8 @@ struct rsi_91x_usbdev {
 	struct usb_interface *pfunction;
 	struct rx_usb_ctrl_block rx_cb[MAX_RX_URBS];
 	u8 *tx_buffer;
-	__le16 bulkin_size;
-	u8 bulkin_endpoint_addr;
+	__le16 bulkin_size[MAX_BULK_EP];
+	u8 bulkin_endpoint_addr[MAX_BULK_EP];
 	__le16 bulkout_size[MAX_BULK_EP];
 	u8 bulkout_endpoint_addr[MAX_BULK_EP];
 	u32 tx_blk_size;
Signature · 1 line
2.7.4
#3 lore raw

PATCH v6 3/8 rsi: add header file rsi_91x

In reply to Amitkumar Karwar

From: Prameela Rani Garnepudi <[email protected]>

The common parameters used by wlan and bt modules are add to a new header file "rsi_91x.h" defined in 'include/net'

---
v6: Renamed rsi_header.h to rsi_91x.h and moved to include/net
from include/linux(Kalle)
v5: Same as earlier versions

---
 drivers/net/wireless/rsi/rsi_main.h | 12 ++----------
 include/net/rsi_91x.h               | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 10 deletions(-)
 create mode 100644 include/net/rsi_91x.h
drivers/net/wireless/rsi/rsi_main.h +2 -10
index ee469dc..b0f4e2c 100644
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/skbuff.h>
 #include <net/mac80211.h>
+#include <net/rsi_91x.h>
 
 struct rsi_sta {
 	struct ieee80211_sta *sta;
@@ -85,10 +86,6 @@ extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
 #define MGMT_HW_Q			10
 #define BEACON_HW_Q			11
 
-/* Queue information */
-#define RSI_COEX_Q			0x0
-#define RSI_WIFI_MGMT_Q                 0x4
-#define RSI_WIFI_DATA_Q                 0x5
 #define IEEE80211_MGMT_FRAME            0x00
 #define IEEE80211_CTL_FRAME             0x04
 
@@ -293,11 +290,6 @@ struct rsi_common {
 	struct ieee80211_vif *roc_vif;
 };
 
-enum host_intf {
-	RSI_HOST_INTF_SDIO = 0,
-	RSI_HOST_INTF_USB
-};
-
 struct eepromrw_info {
 	u32 offset;
 	u32 length;
@@ -322,7 +314,7 @@ struct rsi_hw {
 	struct device *device;
 	u8 sc_nvifs;
 
-	enum host_intf rsi_host_intf;
+	enum rsi_host_intf rsi_host_intf;
 	u16 block_size;
 	enum ps_state ps_state;
 	struct rsi_ps_info ps_info;
include/net/rsi_91x.h new file +34 -0
new file mode 100644
index 0000000..16a447b
@@ -0,0 +1,34 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HEADER_H__
+#define __RSI_HEADER_H__
+
+/* HAL queue information */
+#define RSI_COEX_Q			0x0
+#define RSI_BT_Q			0x2
+#define RSI_WLAN_Q                      0x3
+#define RSI_WIFI_MGMT_Q                 0x4
+#define RSI_WIFI_DATA_Q                 0x5
+#define RSI_BT_MGMT_Q			0x6
+#define RSI_BT_DATA_Q			0x7
+
+enum rsi_host_intf {
+	RSI_HOST_INTF_SDIO = 0,
+	RSI_HOST_INTF_USB
+};
+
+#endif
Signature · 1 line
2.7.4
#4 lore raw

PATCH v6 4/8 rsi: add coex support

In reply to Amitkumar Karwar

From: Prameela Rani Garnepudi <[email protected]>

With BT support, driver has to handle two streams of data (i.e. wlan and BT). Actual coex implementation is in firmware. Coex module just schedule the packets to firmware by taking them from the corresponding paths.

Structures for module and protocol operations are introduced for this purpose. Protocol operations structure is global structure which can be shared among different modules. Move initialization of coex and operating mode values to rsi_91x_init().

---
v6: Rename semaphore tx_bus_lock to tx_bus_sema. Modified coex
scheduling loop to avoid while(1) (Kalle)
v5: Same as earlier versions

---
 drivers/net/wireless/rsi/Kconfig        |   9 ++
 drivers/net/wireless/rsi/Makefile       |   1 +
 drivers/net/wireless/rsi/rsi_91x_coex.c | 177 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_hal.c  |  17 +--
 drivers/net/wireless/rsi/rsi_91x_main.c |  30 +++++-
 drivers/net/wireless/rsi/rsi_91x_mgmt.c |   2 +-
 drivers/net/wireless/rsi/rsi_91x_sdio.c |   1 +
 drivers/net/wireless/rsi/rsi_91x_usb.c  |   2 +
 drivers/net/wireless/rsi/rsi_coex.h     |  38 +++++++
 drivers/net/wireless/rsi/rsi_main.h     |   5 +
 drivers/net/wireless/rsi/rsi_mgmt.h     |   3 +
 include/net/rsi_91x.h                   |  20 ++++
 12 files changed, 295 insertions(+), 10 deletions(-)
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_coex.c
 create mode 100644 drivers/net/wireless/rsi/rsi_coex.h
drivers/net/wireless/rsi/Kconfig +9 -0
index 7c5e4ca..e6135ee 100644
@@ -42,4 +42,13 @@ config RSI_USB
 	  This option enables the USB bus support in rsi drivers.
 	  Select M (recommended), if you have a RSI 1x1 wireless module.
 
+config RSI_COEX
+	bool "Redpine Signals WLAN BT Coexistence support"
+	depends on BT_HCIRSI && RSI_91X
+	default y
+	---help---
+	  This option enables the WLAN BT coex support in rsi drivers.
+	  Select M (recommended), if you have want to use this feature
+	  and you have RS9113 module.
+
 endif # WLAN_VENDOR_RSI
drivers/net/wireless/rsi/Makefile +1 -0
index 47c4590..ff87121a 100644
@@ -5,6 +5,7 @@ rsi_91x-y			+= rsi_91x_mac80211.o
 rsi_91x-y			+= rsi_91x_mgmt.o
 rsi_91x-y			+= rsi_91x_hal.o
 rsi_91x-y			+= rsi_91x_ps.o
+rsi_91x-$(CONFIG_RSI_COEX)	+= rsi_91x_coex.o
 rsi_91x-$(CONFIG_RSI_DEBUGFS)	+= rsi_91x_debugfs.o
 
 rsi_usb-y			+= rsi_91x_usb.o rsi_91x_usb_ops.o
drivers/net/wireless/rsi/rsi_91x_coex.c new file +177 -0

177 lines not on this page · raw message

drivers/net/wireless/rsi/rsi_91x_hal.c +9 -8
index 1176de6..f73d19b 100644
@@ -31,8 +31,15 @@ int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb)
 	struct rsi_hw *adapter = common->priv;
 	int status;
 
+	if (common->coex_mode > 1)
+		down(&common->tx_bus_sema);
+
 	status = adapter->host_intf_ops->write_pkt(common->priv,
 						   skb->data, skb->len);
+
+	if (common->coex_mode > 1)
+		up(&common->tx_bus_sema);
+
 	return status;
 }
 
@@ -296,8 +303,7 @@ int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
 	if (status)
 		goto err;
 
-	status = adapter->host_intf_ops->write_pkt(common->priv, skb->data,
-						   skb->len);
+	status = rsi_send_pkt_to_bus(common, skb);
 	if (status)
 		rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", __func__);
 
@@ -342,8 +348,7 @@ int rsi_send_mgmt_pkt(struct rsi_common *common,
 		goto err;
 
 	rsi_prepare_mgmt_desc(common, skb);
-	status = adapter->host_intf_ops->write_pkt(common->priv,
-						   (u8 *)skb->data, skb->len);
+	status = rsi_send_pkt_to_bus(common, skb);
 	if (status)
 		rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
 
@@ -926,10 +931,6 @@ int rsi_hal_device_init(struct rsi_hw *adapter)
 {
 	struct rsi_common *common = adapter->priv;
 
-	common->coex_mode = RSI_DEV_COEX_MODE_WIFI_ALONE;
-	common->oper_mode = RSI_DEV_OPMODE_WIFI_ALONE;
-	adapter->device_model = RSI_DEV_9113;
-
 	switch (adapter->device_model) {
 	case RSI_DEV_9113:
 		if (rsi_load_firmware(adapter)) {
drivers/net/wireless/rsi/rsi_91x_main.c +29 -1
index 0413af8..a298008 100644
@@ -20,6 +20,7 @@
 #include <linux/firmware.h>
 #include "rsi_mgmt.h"
 #include "rsi_common.h"
+#include "rsi_coex.h"
 #include "rsi_hal.h"
 
 u32 rsi_zone_enabled = /* INFO_ZONE |
@@ -160,8 +161,13 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 
 		switch (queueno) {
 		case RSI_COEX_Q:
-			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+			if (common->coex_mode > 1)
+				rsi_coex_recv_pkt(common, frame_desc + offset);
+			else
+				rsi_mgmt_pkt_recv(common,
+						  (frame_desc + offset));
 			break;
+
 		case RSI_WIFI_DATA_Q:
 			skb = rsi_prepare_skb(common,
 					      (frame_desc + offset),
@@ -217,6 +223,13 @@ static void rsi_tx_scheduler_thread(struct rsi_common *common)
 	complete_and_exit(&common->tx_thread.completion, 0);
 }
 
+enum rsi_host_intf rsi_get_host_intf(void *priv)
+{
+	struct rsi_common *common = (struct rsi_common *)priv;
+
+	return common->priv->rsi_host_intf;
+}
+
 /**
  * rsi_91x_init() - This function initializes os interface operations.
  * @void: Void.
@@ -251,6 +264,7 @@ struct rsi_hw *rsi_91x_init(void)
 	mutex_init(&common->mutex);
 	mutex_init(&common->tx_lock);
 	mutex_init(&common->rx_lock);
+	sema_init(&common->tx_bus_sema, 1);
 
 	if (rsi_create_kthread(common,
 			       &common->tx_thread,
@@ -265,6 +279,17 @@ struct rsi_hw *rsi_91x_init(void)
 	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
 	init_completion(&common->wlan_init_completion);
 	common->init_done = true;
+
+	common->coex_mode = RSI_DEV_COEX_MODE_WIFI_ALONE;
+	common->oper_mode = RSI_DEV_OPMODE_WIFI_ALONE;
+	adapter->device_model = RSI_DEV_9113;
+	if (common->coex_mode > 1) {
+		if (rsi_coex_attach(common)) {
+			rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
+			goto err;
+		}
+	}
+
 	return adapter;
 
 err:
@@ -294,6 +319,9 @@ void rsi_91x_deinit(struct rsi_hw *adapter)
 
 	common->init_done = false;
 
+	if (common->coex_mode > 1)
+		rsi_coex_detach(common);
+
 	kfree(common);
 	kfree(adapter->rsi_dev);
 	kfree(adapter);
drivers/net/wireless/rsi/rsi_91x_mgmt.c +1 -1
index 46c9d54..c21fca7 100644
@@ -1791,7 +1791,7 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common,
 	return -EINVAL;
 }
 
-static int rsi_handle_card_ready(struct rsi_common *common, u8 *msg)
+int rsi_handle_card_ready(struct rsi_common *common, u8 *msg)
 {
 	switch (common->fsm_state) {
 	case FSM_CARD_NOT_READY:
drivers/net/wireless/rsi/rsi_91x_sdio.c +1 -0
index b0cf411..ba38c6d 100644
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include "rsi_sdio.h"
 #include "rsi_common.h"
+#include "rsi_coex.h"
 #include "rsi_hal.h"
 
 /**
drivers/net/wireless/rsi/rsi_91x_usb.c +2 -0
index 9ab86fb..b33a05f 100644
@@ -16,8 +16,10 @@
  */
 
 #include <linux/module.h>
+#include <net/rsi_91x.h>
 #include "rsi_usb.h"
 #include "rsi_hal.h"
+#include "rsi_coex.h"
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
drivers/net/wireless/rsi/rsi_coex.h new file +38 -0
new file mode 100644
index 0000000..bc4994b
@@ -0,0 +1,38 @@
+/**
+ * Copyright (c) 2018 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_COEX_H__
+#define __RSI_COEX_H__
+
+#include "rsi_common.h"
+
+#define RSI_COEX_TXQ_MAX_PKTS		64
+#define RSI_COEX_TXQ_WATER_MARK		50
+#define COMMON_CARD_READY_IND           0
+#define NUM_COEX_TX_QUEUES              5
+
+struct rsi_coex_ctrl_block {
+	struct rsi_common *priv;
+	struct sk_buff_head coex_tx_qs[NUM_COEX_TX_QUEUES];
+	struct rsi_thread coex_tx_thread;
+};
+
+int rsi_coex_attach(struct rsi_common *common);
+void rsi_coex_detach(struct rsi_common *common);
+int rsi_coex_send_pkt(void *priv, struct sk_buff *skb, u8 proto_type);
+int rsi_coex_recv_pkt(struct rsi_common *common, u8 *msg);
+
+#endif
drivers/net/wireless/rsi/rsi_main.h +5 -0
index b0f4e2c..7b01782 100644
@@ -206,6 +206,7 @@ struct rsi_common {
 	struct rsi_hw *priv;
 	struct vif_priv vif_info[RSI_MAX_VIFS];
 
+	void *coex_cb;
 	bool mgmt_q_block;
 	struct version_info lmac_ver;
 
@@ -270,6 +271,7 @@ struct rsi_common {
 	u8 obm_ant_sel_val;
 	int tx_power;
 	u8 ant_in_use;
+	struct semaphore tx_bus_sema;
 	bool hibernate_resume;
 	bool reinit_hw;
 	u8 wow_flags;
@@ -359,4 +361,7 @@ struct rsi_host_intf_ops {
 				      u8 *fw);
 	int (*reinit_device)(struct rsi_hw *adapter);
 };
+
+enum rsi_host_intf rsi_get_host_intf(void *priv);
+
 #endif
drivers/net/wireless/rsi/rsi_mgmt.h +3 -0
index 389094a..cf6567a 100644
@@ -57,12 +57,14 @@
 #define WOW_PATTERN_SIZE 256
 
 /* Receive Frame Types */
+#define RSI_RX_DESC_MSG_TYPE_OFFSET	2
 #define TA_CONFIRM_TYPE                 0x01
 #define RX_DOT11_MGMT                   0x02
 #define TX_STATUS_IND                   0x04
 #define BEACON_EVENT_IND		0x08
 #define PROBEREQ_CONFIRM                2
 #define CARD_READY_IND                  0x00
+#define SLEEP_NOTIFY_IND                0x06
 
 #define RSI_DELETE_PEER                 0x0
 #define RSI_ADD_PEER                    0x1
@@ -638,6 +640,7 @@ static inline void rsi_set_len_qno(__le16 *addr, u16 len, u8 qno)
 	*addr = cpu_to_le16(len | ((qno & 7) << 12));
 }
 
+int rsi_handle_card_ready(struct rsi_common *common, u8 *msg);
 int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
 int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode,
 			     u8 *mac_addr, u8 vap_id, u8 vap_status);
include/net/rsi_91x.h +20 -0
index 16a447b..737ab4e 100644
@@ -17,6 +17,8 @@
 #ifndef __RSI_HEADER_H__
 #define __RSI_HEADER_H__
 
+#include <linux/skbuff.h>
+
 /* HAL queue information */
 #define RSI_COEX_Q			0x0
 #define RSI_BT_Q			0x2
@@ -26,9 +28,27 @@
 #define RSI_BT_MGMT_Q			0x6
 #define RSI_BT_DATA_Q			0x7
 
+enum rsi_coex_queues {
+	RSI_COEX_Q_INVALID = -1,
+	RSI_COEX_Q_COMMON = 0,
+	RSI_COEX_Q_BT,
+	RSI_COEX_Q_WLAN
+};
+
 enum rsi_host_intf {
 	RSI_HOST_INTF_SDIO = 0,
 	RSI_HOST_INTF_USB
 };
 
+struct rsi_proto_ops {
+	int (*coex_send_pkt)(void *priv, struct sk_buff *skb, u8 hal_queue);
+	enum rsi_host_intf (*get_host_intf)(void *priv);
+	void (*set_bt_context)(void *priv, void *context);
+};
+
+struct rsi_mod_ops {
+	int (*attach)(void *priv, struct rsi_proto_ops *ops);
+	void (*detach)(void *priv);
+	int (*recv_pkt)(void *priv, u8 *msg);
+};
 #endif
Signature · 1 line
2.7.4
#5 lore raw

PATCH v6 5/8 Bluetooth: btrsi: add new rsi bluetooth driver

In reply to Amitkumar Karwar

From: Prameela Rani Garnepudi <[email protected]>

Redpine bluetooth driver is a thin driver which depends on 'rsi_91x' driver for transmitting and receiving packets to/from device. It creates hci interface when attach() is called from 'rsi_91x' module.

---
v6: Renamed CONFIG_BT_RSI to CONFIG_BT_HCIRSI (Marcel)
v5: Addressed review comments from Marcel.
Removed reduntant switch case code from rsi_hci_recv_pkt()
Changed bt_cb(skb)->pkt_type to hci_skb_pkt_type(skb)
Removed reduntant '\n' from BT_ERR and redundant BT_INFO messages Changed u8 *pkt to const u8 *pkt in rsi_hci_recv_pkt()
v4: Removed rsi_hci.h file. Made the functions static(Marcel)
v3: Made BT_RSI module by default off(Marcel)
Removed redundant exported function rsi_get_hci_ops()(Marcel)
v2: Addressed review comments from Marcel
Removed unnecessary 'depends on BT && BT_RFOMM' line in Kconfig Removed redundant BT_INFO messages
h_adapter initialization and declaration in a single line.
Removed unnecessary error checks for HCI_RUNNING and fsm_state Allocated new skb with skb_realloc_headroom() API if headroom is not sufficient Used get_unaligned_le16 helpers
Moved a structure and union from header file to btrsi.c file

---
 drivers/bluetooth/Kconfig  |  12 +++
 drivers/bluetooth/Makefile |   2 +
 drivers/bluetooth/btrsi.c  | 188 +++++++++++++++++++++++++++++++++++++++++++++
 include/net/rsi_91x.h      |   4 +-
 4 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 drivers/bluetooth/btrsi.c
drivers/bluetooth/Kconfig +12 -0
index 07e55cd..d8bbd66 100644
@@ -392,4 +392,16 @@ config BT_QCOMSMD
 	  Say Y here to compile support for HCI over Qualcomm SMD into the
 	  kernel or say M to compile as a module.
 
+config BT_HCIRSI
+	tristate "Redpine HCI support"
+	default n
+	select RSI_COEX
+	help
+	  Redpine BT driver.
+	  This driver handles BT traffic from upper layers and pass
+	  to the RSI_91x coex module for further scheduling to device
+
+	  Say Y here to compile support for HCI over Redpine into the
+	  kernel or say M to compile as a module.
+
 endmenu
drivers/bluetooth/Makefile +2 -0
index 4e4e44d..03cfc1b 100644
@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA)		+= btqca.o
 
 obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
 
+obj-$(CONFIG_BT_HCIRSI)		+= btrsi.o
+
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
 
drivers/bluetooth/btrsi.c new file +188 -0

188 lines not on this page · raw message

include/net/rsi_91x.h +3 -1
index 737ab4e..040f07b 100644
@@ -49,6 +49,8 @@ struct rsi_proto_ops {
 struct rsi_mod_ops {
 	int (*attach)(void *priv, struct rsi_proto_ops *ops);
 	void (*detach)(void *priv);
-	int (*recv_pkt)(void *priv, u8 *msg);
+	int (*recv_pkt)(void *priv, const u8 *msg);
 };
+
+extern const struct rsi_mod_ops rsi_bt_ops;
 #endif
Signature · 1 line
2.7.4
#6 lore raw

PATCH v6 6/8 rsi: handle BT traffic in driver

In reply to Amitkumar Karwar

From: Siva Rebbagondla <[email protected]>

BT frames are passed through coex and hal modules to BUS. After firmware is loaded, based on the operating mode CARD READY frame comes for each protocol. When BT card ready is received, BT attach is called.
Protocol operations are exchanged between the modules at initialization time.
Build flag CONFIG_RSI_COEX is introduced to enable coex support if CONFIG_BT_RSIHCI is enabled. Coex operations are valid if coex mode is greater than 1 only.

---
v6: Removed CONFIG_BT_HCIRSI flag dependency on RSI_91x. Introduced
CONFIG_RSI_COEX for coex code. (Kalle)
v5: Same as v3, v4
v3: bt_ops need not be present structure g_proto_ops. It is removed.
v2: WLAN module depends on BT module. Updated in Kconfig

---
 drivers/net/wireless/rsi/rsi_91x_coex.c     |  4 +-
 drivers/net/wireless/rsi/rsi_91x_core.c     | 20 +++++++---
 drivers/net/wireless/rsi/rsi_91x_hal.c      | 39 ++++++++++++++++++++
 drivers/net/wireless/rsi/rsi_91x_main.c     | 57 +++++++++++++++++++++++++++--
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |  1 +
 drivers/net/wireless/rsi/rsi_common.h       |  1 +
 drivers/net/wireless/rsi/rsi_hal.h          | 10 +++++
 drivers/net/wireless/rsi/rsi_main.h         |  3 ++
 8 files changed, 126 insertions(+), 9 deletions(-)
drivers/net/wireless/rsi/rsi_91x_coex.c +3 -1
index c07e839..d055099 100644
@@ -43,8 +43,10 @@ static void rsi_coex_sched_tx_pkts(struct rsi_coex_ctrl_block *coex_cb)
 		coex_q = rsi_coex_determine_coex_q(coex_cb);
 		rsi_dbg(INFO_ZONE, "queue = %d\n", coex_q);
 
-		if (coex_q == RSI_COEX_Q_BT)
+		if (coex_q == RSI_COEX_Q_BT) {
 			skb = skb_dequeue(&coex_cb->coex_tx_qs[RSI_COEX_Q_BT]);
+			rsi_send_bt_pkt(coex_cb->priv, skb);
+		}
 	} while (coex_q != RSI_COEX_Q_INVALID);
 }
 
drivers/net/wireless/rsi/rsi_91x_core.c +15 -5
index d0d2201..5dafd2e 100644
@@ -17,6 +17,7 @@
 #include "rsi_mgmt.h"
 #include "rsi_common.h"
 #include "rsi_hal.h"
+#include "rsi_coex.h"
 
 /**
  * rsi_determine_min_weight_queue() - This function determines the queue with
@@ -301,14 +302,23 @@ void rsi_core_qos_processor(struct rsi_common *common)
 			mutex_unlock(&common->tx_lock);
 			break;
 		}
-
-		if (q_num == MGMT_SOFT_Q) {
-			status = rsi_send_mgmt_pkt(common, skb);
-		} else if (q_num == MGMT_BEACON_Q) {
+		if (q_num == MGMT_BEACON_Q) {
 			status = rsi_send_pkt_to_bus(common, skb);
 			dev_kfree_skb(skb);
 		} else {
-			status = rsi_send_data_pkt(common, skb);
+#ifdef CONFIG_RSI_COEX
+			if (common->coex_mode > 1) {
+				status = rsi_coex_send_pkt(common, skb,
+							   RSI_WLAN_Q);
+			} else {
+#endif
+				if (q_num == MGMT_SOFT_Q)
+					status = rsi_send_mgmt_pkt(common, skb);
+				else
+					status = rsi_send_data_pkt(common, skb);
+#ifdef CONFIG_RSI_COEX
+			}
+#endif
 		}
 
 		if (status) {
drivers/net/wireless/rsi/rsi_91x_hal.c +39 -0
index f73d19b..2e624dde 100644
@@ -15,6 +15,7 @@
  */
 
 #include <linux/firmware.h>
+#include <net/bluetooth/bluetooth.h>
 #include "rsi_mgmt.h"
 #include "rsi_hal.h"
 #include "rsi_sdio.h"
@@ -24,6 +25,7 @@
 static struct ta_metadata metadata_flash_content[] = {
 	{"flash_content", 0x00010000},
 	{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
+	{"rsi/rs9113_wlan_bt_dual_mode.rps", 0x00010000},
 };
 
 int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb)
@@ -357,6 +359,43 @@ int rsi_send_mgmt_pkt(struct rsi_common *common,
 	return status;
 }
 
+int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+	int status = -EINVAL;
+	u8 header_size = 0;
+	struct rsi_bt_desc *bt_desc;
+	u8 queueno = ((skb->data[1] >> 4) & 0xf);
+
+	if (queueno == RSI_BT_MGMT_Q) {
+		status = rsi_send_pkt_to_bus(common, skb);
+		if (status)
+			rsi_dbg(ERR_ZONE, "%s: Failed to write bt mgmt pkt\n",
+				__func__);
+		goto out;
+	}
+	header_size = FRAME_DESC_SZ;
+	if (header_size > skb_headroom(skb)) {
+		rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
+		status = -ENOSPC;
+		goto out;
+	}
+	skb_push(skb, header_size);
+	memset(skb->data, 0, header_size);
+	bt_desc = (struct rsi_bt_desc *)skb->data;
+
+	rsi_set_len_qno(&bt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
+			RSI_BT_DATA_Q);
+	bt_desc->bt_pkt_type = cpu_to_le16(bt_cb(skb)->pkt_type);
+
+	status = rsi_send_pkt_to_bus(common, skb);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed to write bt pkt\n", __func__);
+
+out:
+	dev_kfree_skb(skb);
+	return status;
+}
+
 int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb)
 {
 	struct rsi_hw *adapter = (struct rsi_hw *)common->priv;
drivers/net/wireless/rsi/rsi_91x_main.c +54 -3

121 lines not on this page · raw message

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c +1 -0
index 9fbc0ef..169c981 100644
@@ -16,6 +16,7 @@
  */
 
 #include <linux/firmware.h>
+#include <net/rsi_91x.h>
 #include "rsi_sdio.h"
 #include "rsi_common.h"
 
drivers/net/wireless/rsi/rsi_common.h +1 -0
index 1d8af41..4616585 100644
@@ -62,6 +62,7 @@ static inline int rsi_create_kthread(struct rsi_common *common,
 				     u8 *name)
 {
 	init_completion(&thread->completion);
+	atomic_set(&thread->thread_done, 0);
 	thread->task = kthread_run(func_ptr, common, "%s", name);
 	if (IS_ERR(thread->task))
 		return (int)PTR_ERR(thread->task);
drivers/net/wireless/rsi/rsi_hal.h +10 -0
index a09d36b..e712223 100644
@@ -145,8 +145,18 @@ struct rsi_data_desc {
 	u8 sta_id;
 } __packed;
 
+struct rsi_bt_desc {
+	__le16 len_qno;
+	__le16 reserved1;
+	__le32 reserved2;
+	__le32 reserved3;
+	__le16 reserved4;
+	__le16 bt_pkt_type;
+} __packed;
+
 int rsi_hal_device_init(struct rsi_hw *adapter);
 int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb);
 int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb);
 
 #endif
drivers/net/wireless/rsi/rsi_main.h +3 -0
index 7b01782..588c89b 100644
@@ -290,6 +290,8 @@ struct rsi_common {
 	bool p2p_enabled;
 	struct timer_list roc_timer;
 	struct ieee80211_vif *roc_vif;
+
+	void *bt_adapter;
 };
 
 struct eepromrw_info {
@@ -363,5 +365,6 @@ struct rsi_host_intf_ops {
 };
 
 enum rsi_host_intf rsi_get_host_intf(void *priv);
+void rsi_set_bt_context(void *priv, void *bt_context);
 
 #endif
Signature · 1 line
2.7.4
#7 lore raw

PATCH v6 7/8 rsi: add module parameter operating mode

In reply to Amitkumar Karwar

From: Prameela Rani Garnepudi <[email protected]>

Operating mode determines the support for other protocols. This is made as module parameter for better usage.

---
 drivers/net/wireless/rsi/rsi_91x_main.c | 48 ++++++++++++++++++++++++++++++---
 drivers/net/wireless/rsi/rsi_91x_sdio.c | 10 ++++++-
 drivers/net/wireless/rsi/rsi_91x_usb.c  | 10 ++++++-
 drivers/net/wireless/rsi/rsi_common.h   |  2 +-
 drivers/net/wireless/rsi/rsi_hal.h      | 11 ++++++++
 5 files changed, 74 insertions(+), 7 deletions(-)
drivers/net/wireless/rsi/rsi_91x_main.c +44 -4
index e5bb7e7..05556b0 100644
@@ -70,8 +70,24 @@ EXPORT_SYMBOL_GPL(rsi_dbg);
 static char *opmode_str(int oper_mode)
 {
 	switch (oper_mode) {
-	case RSI_DEV_OPMODE_WIFI_ALONE:
+	case DEV_OPMODE_WIFI_ALONE:
 		return "Wi-Fi alone";
+	case DEV_OPMODE_BT_ALONE:
+		return "BT EDR alone";
+	case DEV_OPMODE_BT_LE_ALONE:
+		return "BT LE alone";
+	case DEV_OPMODE_BT_DUAL:
+		return "BT Dual";
+	case DEV_OPMODE_STA_BT:
+		return "Wi-Fi STA + BT EDR";
+	case DEV_OPMODE_STA_BT_LE:
+		return "Wi-Fi STA + BT LE";
+	case DEV_OPMODE_STA_BT_DUAL:
+		return "Wi-Fi STA + BT DUAL";
+	case DEV_OPMODE_AP_BT:
+		return "Wi-Fi AP + BT EDR";
+	case DEV_OPMODE_AP_BT_DUAL:
+		return "Wi-Fi AP + BT DUAL";
 	}
 
 	return "Unknown";
@@ -278,7 +294,7 @@ void rsi_set_bt_context(void *priv, void *bt_context)
  *
  * Return: Pointer to the adapter structure on success, NULL on failure .
  */
-struct rsi_hw *rsi_91x_init(void)
+struct rsi_hw *rsi_91x_init(u16 oper_mode)
 {
 	struct rsi_hw *adapter = NULL;
 	struct rsi_common *common = NULL;
@@ -321,9 +337,33 @@ struct rsi_hw *rsi_91x_init(void)
 	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
 	init_completion(&common->wlan_init_completion);
 	common->init_done = true;
+	adapter->device_model = RSI_DEV_9113;
+	common->oper_mode = oper_mode;
+
+	/* Determine coex mode */
+	switch (common->oper_mode) {
+	case DEV_OPMODE_STA_BT_DUAL:
+	case DEV_OPMODE_STA_BT:
+	case DEV_OPMODE_STA_BT_LE:
+	case DEV_OPMODE_BT_ALONE:
+	case DEV_OPMODE_BT_LE_ALONE:
+	case DEV_OPMODE_BT_DUAL:
+		common->coex_mode = 2;
+		break;
+	case DEV_OPMODE_AP_BT_DUAL:
+	case DEV_OPMODE_AP_BT:
+		common->coex_mode = 4;
+		break;
+	case DEV_OPMODE_WIFI_ALONE:
+		common->coex_mode = 1;
+		break;
+	default:
+		common->oper_mode = 1;
+		common->coex_mode = 1;
+	}
+	rsi_dbg(INFO_ZONE, "%s: oper_mode = %d, coex_mode = %d\n",
+		__func__, common->oper_mode, common->coex_mode);
 
-	common->coex_mode = RSI_DEV_COEX_MODE_WIFI_ALONE;
-	common->oper_mode = RSI_DEV_OPMODE_WIFI_ALONE;
 	adapter->device_model = RSI_DEV_9113;
 #ifdef CONFIG_RSI_COEX
 	if (common->coex_mode > 1) {
drivers/net/wireless/rsi/rsi_91x_sdio.c +9 -1
index ba38c6d..5722736 100644
@@ -21,6 +21,14 @@
 #include "rsi_coex.h"
 #include "rsi_hal.h"
 
+/* Default operating mode is wlan STA + BT */
+static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
+module_param(dev_oper_mode, ushort, 0444);
+MODULE_PARM_DESC(dev_oper_mode,
+		 "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
+		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
+		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+
 /**
  * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
  * @rw: Read/write
@@ -926,7 +934,7 @@ static int rsi_probe(struct sdio_func *pfunction,
 
 	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
 
-	adapter = rsi_91x_init();
+	adapter = rsi_91x_init(dev_oper_mode);
 	if (!adapter) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
 			__func__);
drivers/net/wireless/rsi/rsi_91x_usb.c +9 -1
index b33a05f..0a50cff 100644
@@ -21,6 +21,14 @@
 #include "rsi_hal.h"
 #include "rsi_coex.h"
 
+/* Default operating mode is wlan STA + BT */
+static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
+module_param(dev_oper_mode, ushort, 0444);
+MODULE_PARM_DESC(dev_oper_mode,
+		 "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
+		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
+		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
  * @adapter: Pointer to the adapter structure.
@@ -708,7 +716,7 @@ static int rsi_probe(struct usb_interface *pfunction,
 
 	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
 
-	adapter = rsi_91x_init();
+	adapter = rsi_91x_init(dev_oper_mode);
 	if (!adapter) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
 			__func__);
drivers/net/wireless/rsi/rsi_common.h +1 -1
index 4616585..d9ff3b8 100644
@@ -81,7 +81,7 @@ static inline int rsi_kill_thread(struct rsi_thread *handle)
 
 void rsi_mac80211_detach(struct rsi_hw *hw);
 u16 rsi_get_connected_channel(struct ieee80211_vif *vif);
-struct rsi_hw *rsi_91x_init(void);
+struct rsi_hw *rsi_91x_init(u16 oper_mode);
 void rsi_91x_deinit(struct rsi_hw *adapter);
 int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len);
 #ifdef CONFIG_PM
drivers/net/wireless/rsi/rsi_hal.h +11 -0
index e712223..a7d3011 100644
@@ -17,6 +17,17 @@
 #ifndef __RSI_HAL_H__
 #define __RSI_HAL_H__
 
+/* Device Operating modes */
+#define DEV_OPMODE_WIFI_ALONE		1
+#define DEV_OPMODE_BT_ALONE		4
+#define DEV_OPMODE_BT_LE_ALONE		8
+#define DEV_OPMODE_BT_DUAL		12
+#define DEV_OPMODE_STA_BT		5
+#define DEV_OPMODE_STA_BT_LE		9
+#define DEV_OPMODE_STA_BT_DUAL		13
+#define DEV_OPMODE_AP_BT		6
+#define DEV_OPMODE_AP_BT_DUAL		14
+
 #define FLASH_WRITE_CHUNK_SIZE		(4 * 1024)
 #define FLASH_SECTOR_SIZE		(4 * 1024)
 
Signature · 1 line
2.7.4
#8 lore raw

PATCH v6 8/8 rsi: sdio changes to support BT

In reply to Amitkumar Karwar

From: Prameela Rani Garnepudi <[email protected]>

Queue number is correctly updated for BT traffic. Also, kzalloc instead of kmalloc is used for Rx packet allocation.

---
 drivers/net/wireless/rsi/rsi_91x_sdio.c     | 2 ++
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/rsi/rsi_91x_sdio.c +2 -0
index 5722736..beb18d0 100644
@@ -763,6 +763,8 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
 	int status;
 
 	queueno = ((pkt[1] >> 4) & 0xf);
+	if (queueno == RSI_BT_MGMT_Q || queueno == RSI_BT_DATA_Q)
+		queueno = RSI_BT_Q;
 
 	num_blocks = len / block_size;
 
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c +1 -1
index 169c981..6e74261 100644
@@ -103,7 +103,7 @@ static int rsi_process_pkt(struct rsi_common *common)
 
 	rcv_pkt_len = (num_blks * 256);
 
-	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
+	common->rx_data_pkt = kzalloc(rcv_pkt_len, GFP_KERNEL);
 	if (!common->rx_data_pkt) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
 			__func__);
Signature · 1 line
2.7.4