Skip to contentSkip to conversation

FAILED: patch "[PATCH] powerpc/64s/radix: Boot-time NULL pointer protection using a" failed to apply to 4.15-stable tree

PATCH In review [email protected] 3 participants 4 messages Feb 19, 2018 – Mar 7, 2018

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

Quoted 1 line

From eeb715c3e995fbdda0cc05e61216c6c5609bce66 Mon Sep 17 00:00:00 2001

From: Nicholas Piggin <[email protected]>
Date: Wed, 7 Feb 2018 11:20:02 +1000
Subject: [PATCH] powerpc/64s/radix: Boot-time NULL pointer protection using a
guard-PID

This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance.

powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry.

An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0.

To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault.

After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for.

Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo).

Fixes 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc [email protected] # v4.15+
arch/powerpc/mm/pgtable-radix.c +20 -1
index 573a9a2ee455..96e07d1f673d 100644
@@ -20,6 +20,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
 #include <asm/dma.h>
 #include <asm/machdep.h>
 #include <asm/mmu.h>
@@ -333,6 +334,22 @@ static void __init radix_init_pgtable(void)
 		     "r" (TLBIEL_INVAL_SET_LPID), "r" (0));
 	asm volatile("eieio; tlbsync; ptesync" : : : "memory");
 	trace_tlbie(0, 0, TLBIEL_INVAL_SET_LPID, 0, 2, 1, 1);
+
+	/*
+	 * The init_mm context is given the first available (non-zero) PID,
+	 * which is the "guard PID" and contains no page table. PIDR should
+	 * never be set to zero because that duplicates the kernel address
+	 * space at the 0x0... offset (quadrant 0)!
+	 *
+	 * An arbitrary PID that may later be allocated by the PID allocator
+	 * for userspace processes must not be used either, because that
+	 * would cause stale user mappings for that PID on CPUs outside of
+	 * the TLB invalidation scheme (because it won't be in mm_cpumask).
+	 *
+	 * So permanently carve out one PID for the purpose of a guard PID.
+	 */
+	init_mm.context.id = mmu_base_pid;
+	mmu_base_pid++;
 }
 
 static void __init radix_init_partition_table(void)
@@ -579,7 +596,8 @@ void __init radix__early_init_mmu(void)
 
 	radix_init_iamr();
 	radix_init_pgtable();
-
+	/* Switch to the guard PID before turning on MMU */
+	radix__switch_mmu_context(NULL, &init_mm);
 	if (cpu_has_feature(CPU_FTR_HVMODE))
 		tlbiel_all();
 }
@@ -604,6 +622,7 @@ void radix__early_init_mmu_secondary(void)
 	}
 	radix_init_iamr();
 
+	radix__switch_mmu_context(NULL, &init_mm);
 	if (cpu_has_feature(CPU_FTR_HVMODE))
 		tlbiel_all();
 }
#1 lore raw

PATCH 1/1 powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID

From: Nicholas Piggin <[email protected]>

commit eeb715c3e995fbdda0cc05e61216c6c5609bce66 upstream

This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance.

powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry.

An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0.

To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault.

After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for.

Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo).

Fixes 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc [email protected] # v4.15+
[mauricfo: backport to v4.15.7 (context line updates only) and re-test]
---
 arch/powerpc/mm/pgtable-radix.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

Test:
====

    Original:
    --------

    # uname -r
    4.15.7

    # a.out
    timedlock error != ETIMEDOUT: 38

    # echo $?
    1

    Patched:
    -------

    # uname -r
    4.15.7.guardpid

    # a.out

    #  echo $?
    0
arch/powerpc/mm/pgtable-radix.c +20 -0
index 573a9a2..96e07d1 100644
@@ -20,6 +20,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
 #include <asm/dma.h>
 #include <asm/machdep.h>
 #include <asm/mmu.h>
@@ -333,6 +334,22 @@ static void __init radix_init_pgtable(void)
 		     "r" (TLBIEL_INVAL_SET_LPID), "r" (0));
 	asm volatile("eieio; tlbsync; ptesync" : : : "memory");
 	trace_tlbie(0, 0, TLBIEL_INVAL_SET_LPID, 0, 2, 1, 1);
+
+	/*
+	 * The init_mm context is given the first available (non-zero) PID,
+	 * which is the "guard PID" and contains no page table. PIDR should
+	 * never be set to zero because that duplicates the kernel address
+	 * space at the 0x0... offset (quadrant 0)!
+	 *
+	 * An arbitrary PID that may later be allocated by the PID allocator
+	 * for userspace processes must not be used either, because that
+	 * would cause stale user mappings for that PID on CPUs outside of
+	 * the TLB invalidation scheme (because it won't be in mm_cpumask).
+	 *
+	 * So permanently carve out one PID for the purpose of a guard PID.
+	 */
+	init_mm.context.id = mmu_base_pid;
+	mmu_base_pid++;
 }
 
 static void __init radix_init_partition_table(void)
@@ -579,6 +596,8 @@ void __init radix__early_init_mmu(void)
 
 	radix_init_iamr();
 	radix_init_pgtable();
+	/* Switch to the guard PID before turning on MMU */
+	radix__switch_mmu_context(NULL, &init_mm);
 }
 
 void radix__early_init_mmu_secondary(void)
@@ -604,6 +622,7 @@ void radix__early_init_mmu_secondary(void)
 		radix_init_amor();
 	}
 	radix_init_iamr();
+	radix__switch_mmu_context(NULL, &init_mm);
 }
 
 void radix__mmu_cleanup_all(void)
Signature · 1 line
1.8.3.1
reviewer Acked-by on v1 1/1
#2 lore raw

Re: [PATCH 4.15] powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID

Quoted 41 lines · Mauricio Faria de Oliveira

From: Nicholas Piggin <[email protected]>

commit eeb715c3e995fbdda0cc05e61216c6c5609bce66 upstream

This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance.

powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry.

An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0.

To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault.

After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for.

Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo).

Quoted 8 lines
Fixes 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc [email protected] # v4.15+
[mauricfo: backport to v4.15.7 (context line updates only) and re-test]

Backport looks good, thanks very much for doing it.

cheers

author maintainer
#3 lore raw

Re: [PATCH 4.15] powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID

In reply to Mauricio Faria de Oliveira
Quoted 50 lines · Mauricio Faria de Oliveira

From: Nicholas Piggin <[email protected]>

commit eeb715c3e995fbdda0cc05e61216c6c5609bce66 upstream

This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance.

powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry.

An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0.

To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault.

After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for.

Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo).

Fixes 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc [email protected] # v4.15+
[mauricfo: backport to v4.15.7 (context line updates only) and re-test]
Quoted 3 lines
---
 arch/powerpc/mm/pgtable-radix.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

Now applied, thanks.

greg k-h