mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller
cover mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller
This series of patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and CONFIG_ZYNQ_SDHCI_MIN_FREQ and set the default values.
Vipul Kumar (2):
mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/xilinx_zynqmp_ep_defconfig | 2 ++ drivers/mmc/Kconfig | 13 +++++++++++++ drivers/mmc/zynq_sdhci.c | 4 ---- include/configs/xilinx_zynqmp.h | 3 --- include/configs/xilinx_zynqmp_ep.h | 2 -- include/configs/zynq-common.h | 5 ----- 8 files changed, 21 insertions(+), 14 deletions(-)
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 1/2 mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig.
--- arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/xilinx_zynqmp_ep_defconfig | 1 + drivers/mmc/Kconfig | 6 ++++++ include/configs/xilinx_zynqmp.h | 3 --- include/configs/xilinx_zynqmp_ep.h | 1 - include/configs/zynq-common.h | 5 ----- 7 files changed, 13 insertions(+), 9 deletions(-)
arch/arm/cpu/armv8/zynqmp/Kconfig +3 -0
@@ -96,6 +96,9 @@ config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED Overwrite bootmode selected via boot mode pins to tell SPL what should be the next boot device. +config ZYNQ_SDHCI_MAX_FREQ + default 200000000 + config SPL_ZYNQMP_ALT_BOOTMODE hex default 0x0 if JTAG_MODE
arch/arm/mach-zynq/Kconfig +3 -0
@@ -63,4 +63,7 @@ config BOOT_INIT_FILE Add register writes to boot.bin format (max 256 pairs). Expect a table of register-value pairs, e.g. "0x12345678 0x4321" +config ZYNQ_SDHCI_MAX_FREQ + default 52000000 + endif
configs/xilinx_zynqmp_ep_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep" CONFIG_ARCH_ZYNQMP=y CONFIG_SYS_TEXT_BASE=0x8000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_ZYNQ_SDHCI_MAX_FREQ=52000000 CONFIG_ZYNQMP_USB=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108" CONFIG_DEBUG_UART=y
drivers/mmc/Kconfig +6 -0
@@ -472,6 +472,12 @@ config MMC_SDHCI_ZYNQ help Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform +config ZYNQ_SDHCI_MAX_FREQ + int "Set the maximum frequency of cotroller" + depends on MMC_SDHCI_ZYNQ + help + Set the maximum frequency for the SDHCI controller. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F
include/configs/xilinx_zynqmp.h +0 -3
@@ -69,9 +69,6 @@#if defined(CONFIG_MMC_SDHCI_ZYNQ )# define CONFIG_SUPPORT_EMMC_BOOT -# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ -# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000 -# endif #endif #ifdef CONFIG_NAND_ARASAN
include/configs/xilinx_zynqmp_ep.h +0 -1
@@ -13,7 +13,6 @@#ifndef __CONFIG_ZYNQMP_EP_H#define __CONFIG_ZYNQMP_EP_H -#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)#define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
include/configs/zynq-common.h +0 -5
@@ -76,11 +76,6 @@#define CONFIG_MTD_DEVICE #endif -/* MMC */ -#if defined(CONFIG_MMC_SDHCI_ZYNQ ) -# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 -#endif -#ifdef CONFIG_USB_EHCI_ZYNQ # define CONFIG_EHCI_IS_TDI
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 2/2 mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
In reply to Vipul KumarThis patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ and enabled it in respective defconfig.
--- configs/xilinx_zynqmp_ep_defconfig | 1 + drivers/mmc/Kconfig | 7 +++++++ drivers/mmc/zynq_sdhci.c | 4 ---- include/configs/xilinx_zynqmp_ep.h | 1 - 4 files changed, 8 insertions(+), 5 deletions(-)
configs/xilinx_zynqmp_ep_defconfig +1 -0
@@ -62,6 +62,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ZYNQ_SDHCI_MIN_FREQ=101562 CONFIG_NAND=y CONFIG_NAND_ARASAN=y CONFIG_SPI_FLASH=y
drivers/mmc/Kconfig +7 -0
@@ -478,6 +478,13 @@ config ZYNQ_SDHCI_MAX_FREQ help Set the maximum frequency for the SDHCI controller. +config ZYNQ_SDHCI_MIN_FREQ + int "Set the minimum frequencyof the controller" + depends on MMC_SDHCI_ZYNQ + default 0 + help + Set the minimum frequencyof the controller. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F
drivers/mmc/zynq_sdhci.c +0 -4
@@ -16,10 +16,6 @@DECLARE_GLOBAL_DATA_PTR ; -#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ -# define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0 -#endif -struct arasan_sdhci_plat {struct mmc_config cfg;struct mmc mmc;
include/configs/xilinx_zynqmp_ep.h +0 -1
@@ -13,7 +13,6 @@#ifndef __CONFIG_ZYNQMP_EP_H#define __CONFIG_ZYNQMP_EP_H -#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)#define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR}
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 2/2 mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Hi,
Quoted 17 lines · Vipul Kumar
This patch added
Kconfigsupport forCONFIG_ZYNQ_SDHCI_MIN_FREQand enabled it in respective defconfig.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>--- configs/xilinx_zynqmp_ep_defconfig | 1 + drivers/mmc/Kconfig | 7 +++++++ drivers/mmc/zynq_sdhci.c | 4 ---- include/configs/xilinx_zynqmp_ep.h | 1 - 4 files changed, 8 insertions(+), 5 deletions(-)configs/xilinx_zynqmp_ep_defconfig +0
-0
configs/xilinx_zynqmp_ep_defconfig CONFIG_MISC=y · line 65
Quoted 4 lines
configs/xilinx_zynqmp_ep_defconfig +1
-0@@ -62,6 +62,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ZYNQ_SDHCI_MIN_FREQ=101562
It seems that 101562 is the shifted value. If ZYNQ_SDHCI_MIN_REQ is set to 100KHz, what happen?
Best Regards,
Jaehoon Chung
Quoted 57 lines
configs/xilinx_zynqmp_ep_defconfig +0
-0CONFIG_NAND=y CONFIG_NAND_ARASAN=y CONFIG_SPI_FLASH=ydrivers/mmc/Kconfig +7
-0@@ -478,6 +478,13 @@ config ZYNQ_SDHCI_MAX_FREQ help Set the maximum frequency for the SDHCI controller. +config ZYNQ_SDHCI_MIN_FREQ + int "Set the minimum frequencyof the controller" + depends on MMC_SDHCI_ZYNQ + default 0 + help + Set the minimum frequencyof the controller. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_Fdrivers/mmc/zynq_sdhci.c +0
-4@@ -16,10 +16,6 @@DECLARE_GLOBAL_DATA_PTR ; -#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ -# define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0 -#endif -struct arasan_sdhci_plat {struct mmc_config cfg;struct mmc mmc;include/configs/xilinx_zynqmp_ep.h +0
-2@@ -13,7 +13,6 @@#ifndef __CONFIG_ZYNQMP_EP_H#define __CONFIG_ZYNQMP_EP_H -#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)#define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} --2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 2/2 mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Quoted 15 lines · Jaehoon Chung
Hi,
Quoted 12 lines · Vipul Kumar
This patch added
Kconfigsupport forCONFIG_ZYNQ_SDHCI_MIN_FREQand enabled it in respective defconfig.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>--- configs/xilinx_zynqmp_ep_defconfig | 1 + drivers/mmc/Kconfig | 7 +++++++ drivers/mmc/zynq_sdhci.c | 4 ---- include/configs/xilinx_zynqmp_ep.h | 1 - 4 files changed, 8 insertions(+), 5 deletions(-)
Quoted 12 lines
configs/xilinx_zynqmp_ep_defconfig CONFIG_MISC=y · line 65
Quoted 9 lines
configs/xilinx_zynqmp_ep_defconfig +1
-0@@ -62,6 +62,7 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ZYNQ_SDHCI_MIN_FREQ=101562It seems that 101562 is the shifted value. If
ZYNQ_SDHCI_MIN_REQis set to 100KHz, what happen?
Vipul: Please test it but I think 100kHz should just work without any issue.
M