Skip to contentSkip to conversation

Interactive Boot Menu for DASD and SCSI Guests on s390x

PATCH In review Collin L. Walling 3 participants 18 messages Feb 23, 2018

lore
Share & tools
lore
#0 lore raw

v9 cover Interactive Boot Menu for DASD and SCSI Guests on s390x

--- [v9] ---

- only set boot menu opts if a bootindex was specified on cmd

- Menus for guests with an IPL device that chooses to use the SCSI scheme are only enabled explicitly for -boot menu=on options (i.e. it will appropriately and cleanly ignore the zipl flag)

--- [Summary] ---

These patches implement a boot menu for ECKD DASD and SCSI guests on s390x. The menu will only appear if the disk has been configured for IPL with the zIPL tool and with the following QEMU command line options:

-boot menu=on[,splash-time=X] and/or -machine loadparm='prompt'

The following must be specified for the device to be IPL'd from:

    -device ...,bootindex=1

or via the following libvirt domain xml:

    <os>
      <bootmenu enable='yes' timeout='X'/>
    </os>

    or
    
    <disk>
      ...
      <boot order='1' loadparm='PROMPT'/>
    </disk>

Where X is some positive integer representing time in milliseconds.

<boot order='1' ... > must be specified for the device to be IPL'd from

A loadparm other than 'prompt' will disable the menu and just boot the specified entry.

If no boot options are specified, we will attempt to use the values provided by zipl (ECKD DASD only).

Collin L. Walling (13):
s390-ccw: refactor boot map table code
s390-ccw: refactor eckd_block_num to use CHS
s390-ccw: refactor IPL structs
s390-ccw: update libc
s390-ccw: move auxiliary IPL data to separate location
s390-ccw: parse and set boot menu options
s390-ccw: set up interactive boot menu parameters
s390-ccw: read stage2 boot loader data to find menu
s390-ccw: print zipl boot menu
s390-ccw: read user input for boot index via the SCLP console
s390-ccw: set cp_receive mask only when needed and consume pending
service irqs
s390-ccw: use zipl values when no boot menu options are present
s390-ccw: interactive boot menu for scsi

 hw/s390x/ipl.c              |  76 +++++++++++++-
 hw/s390x/ipl.h              |  31 +++++-
 pc-bios/s390-ccw/Makefile   |   2 +-
 pc-bios/s390-ccw/bootmap.c  | 184 +++++++++++++++++++++++---------
 pc-bios/s390-ccw/bootmap.h  |  91 ++++++++++------
 pc-bios/s390-ccw/iplb.h     |  24 ++++-
 pc-bios/s390-ccw/libc.c     |  88 ++++++++++++++++
 pc-bios/s390-ccw/libc.h     |  37 ++++++-
 pc-bios/s390-ccw/main.c     |  49 ++++++---
 pc-bios/s390-ccw/menu.c     | 249 ++++++++++++++++++++++++++++++++++++++++++++
 pc-bios/s390-ccw/s390-ccw.h |  10 ++
 pc-bios/s390-ccw/sclp.c     |  39 ++++---
 pc-bios/s390-ccw/virtio.c   |   2 +-
 13 files changed, 756 insertions(+), 126 deletions(-)
 create mode 100644 pc-bios/s390-ccw/libc.c
 create mode 100644 pc-bios/s390-ccw/menu.c
Signature · 1 line
2.7.4
#1 lore raw

PATCH v9 1/13 s390-ccw: refactor boot map table code

Some ECKD bootmap code was using structs designed for SCSI. Even though this works, it confuses readability. Add a new BootMapTable struct to assist with readability in bootmap entry code. Also:

- replace ScsiMbr in ECKD code with appropriate structs
- fix read_block messages to reflect BootMapTable
- fixup ipl_scsi to use BootMapTable (referred to as Program Table)
- defined value for maximum table entries

---
 pc-bios/s390-ccw/bootmap.c | 60 +++++++++++++++++++++-------------------------
 pc-bios/s390-ccw/bootmap.h | 11 ++++++++-
 2 files changed, 37 insertions(+), 34 deletions(-)
pc-bios/s390-ccw/bootmap.c +27 -33
index 67a6123..a4eaf24 100644
@@ -182,24 +182,24 @@ static block_number_t load_eckd_segments(block_number_t blk, uint64_t *address)
     return block_nr;
 }
 
-static void run_eckd_boot_script(block_number_t mbr_block_nr)
+static void run_eckd_boot_script(block_number_t bmt_block_nr)
 {
     int i;
     unsigned int loadparm = get_loadparm_index();
     block_number_t block_nr;
     uint64_t address;
-    ScsiMbr *bte = (void *)sec; /* Eckd bootmap table entry */
+    BootMapTable *bmt = (void *)sec;
     BootMapScript *bms = (void *)sec;
 
     debug_print_int("loadparm", loadparm);
-    IPL_assert(loadparm < 31, "loadparm value greater than"
+    IPL_assert(loadparm <= MAX_TABLE_ENTRIES, "loadparm value greater than"
                " maximum number of boot entries allowed");
 
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
-    read_block(mbr_block_nr, sec, "Cannot read MBR");
+    read_block(bmt_block_nr, sec, "Cannot read Boot Map Table");
 
-    block_nr = eckd_block_num((void *)&(bte->blockptr[loadparm]));
-    IPL_assert(block_nr != -1, "No Boot Map");
+    block_nr = eckd_block_num(&bmt->entry[loadparm]);
+    IPL_assert(block_nr != -1, "Cannot find Boot Map Table Entry");
 
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(block_nr, sec, "Cannot read Boot Map Script");
@@ -223,7 +223,7 @@ static void ipl_eckd_cdl(void)
     XEckdMbr *mbr;
     Ipl2 *ipl2 = (void *)sec;
     IplVolumeLabel *vlbl = (void *)sec;
-    block_number_t block_nr;
+    block_number_t bmt_block_nr;
 
     /* we have just read the block #0 and recognized it as "IPL1" */
     sclp_print("CDL\n");
@@ -238,8 +238,8 @@ static void ipl_eckd_cdl(void)
     IPL_assert(mbr->dev_type == DEV_TYPE_ECKD,
                "Non-ECKD device type in zIPL section of IPL2 record.");
 
-    /* save pointer to Boot Script */
-    block_nr = eckd_block_num((void *)&(mbr->blockptr));
+    /* save pointer to Boot Map Table */
+    bmt_block_nr = eckd_block_num(&mbr->blockptr);
 
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(2, vlbl, "Cannot read Volume Label at block 2");
@@ -249,7 +249,7 @@ static void ipl_eckd_cdl(void)
                "Invalid magic of volser block");
     print_volser(vlbl->f.volser);
 
-    run_eckd_boot_script(block_nr);
+    run_eckd_boot_script(bmt_block_nr);
     /* no return */
 }
 
@@ -280,7 +280,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode)
 
 static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
 {
-    block_number_t block_nr;
+    block_number_t bmt_block_nr;
     BootInfo *bip = (void *)(sec + 0x70); /* BootInfo is MBR for LDL */
 
     if (mode != ECKD_LDL_UNLABELED) {
@@ -299,8 +299,10 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
     }
     verify_boot_info(bip);
 
-    block_nr = eckd_block_num((void *)&(bip->bp.ipl.bm_ptr.eckd.bptr));
-    run_eckd_boot_script(block_nr);
+    /* save pointer to Boot Map Table */
+    bmt_block_nr = eckd_block_num((void *)&bip->bp.ipl.bm_ptr.eckd.bptr);
+
+    run_eckd_boot_script(bmt_block_nr);
     /* no return */
 }
 
@@ -325,7 +327,7 @@ static void print_eckd_msg(void)
 
 static void ipl_eckd(void)
 {
-    ScsiMbr *mbr = (void *)sec;
+    XEckdMbr *mbr = (void *)sec;
     LDL_VTOC *vlbl = (void *)sec;
 
     print_eckd_msg();
@@ -449,10 +451,8 @@ static void zipl_run(ScsiBlockPtr *pte)
 static void ipl_scsi(void)
 {
     ScsiMbr *mbr = (void *)sec;
-    uint8_t *ns, *ns_end;
     int program_table_entries = 0;
-    const int pte_len = sizeof(ScsiBlockPtr);
-    ScsiBlockPtr *prog_table_entry = NULL;
+    BootMapTable *prog_table = (void *)sec;
     unsigned int loadparm = get_loadparm_index();
 
     /* Grab the MBR */
@@ -467,34 +467,28 @@ static void ipl_scsi(void)
     debug_print_int("MBR Version", mbr->version_id);
     IPL_check(mbr->version_id == 1,
               "Unknown MBR layout version, assuming version 1");
-    debug_print_int("program table", mbr->blockptr[0].blockno);
-    IPL_assert(mbr->blockptr[0].blockno, "No Program Table");
+    debug_print_int("program table", mbr->pt.blockno);
+    IPL_assert(mbr->pt.blockno, "No Program Table");
 
     /* Parse the program table */
-    read_block(mbr->blockptr[0].blockno, sec,
-               "Error reading Program Table");
-
+    read_block(mbr->pt.blockno, sec, "Error reading Program Table");
     IPL_assert(magic_match(sec, ZIPL_MAGIC), "No zIPL magic in PT");
 
-    debug_print_int("loadparm index", loadparm);
-    ns_end = sec + virtio_get_block_size();
-    for (ns = (sec + pte_len); (ns + pte_len) < ns_end; ns += pte_len) {
-        prog_table_entry = (ScsiBlockPtr *)ns;
-        if (!prog_table_entry->blockno) {
+    while (program_table_entries <= MAX_TABLE_ENTRIES) {
+        if (!prog_table->entry[program_table_entries].scsi.blockno) {
             break;
         }
-
         program_table_entries++;
-        if (program_table_entries == loadparm + 1) {
-            break; /* selected entry found */
-        }
     }
 
     debug_print_int("program table entries", program_table_entries);
-
     IPL_assert(program_table_entries != 0, "Empty Program Table");
 
-    zipl_run(prog_table_entry); /* no return */
+    debug_print_int("loadparm", loadparm);
+    IPL_assert(loadparm <= MAX_TABLE_ENTRIES, "loadparm value greater than"
+               " maximum number of boot entries allowed");
+
+    zipl_run(&prog_table->entry[loadparm].scsi); /* no return */
 }
 
 /***********************************************************************
pc-bios/s390-ccw/bootmap.h +10 -1
index cf99a4c..486c0f3 100644
@@ -53,6 +53,15 @@ typedef union BootMapPointer {
     ExtEckdBlockPtr xeckd;
 } __attribute__ ((packed)) BootMapPointer;
 
+#define MAX_TABLE_ENTRIES  30
+
+/* aka Program Table */
+typedef struct BootMapTable {
+    uint8_t magic[4];
+    uint8_t reserved[12];
+    BootMapPointer entry[];
+} __attribute__ ((packed)) BootMapTable;
+
 typedef struct ComponentEntry {
     ScsiBlockPtr data;
     uint8_t pad[7];
@@ -70,7 +79,7 @@ typedef struct ScsiMbr {
     uint8_t magic[4];
     uint32_t version_id;
     uint8_t reserved[8];
-    ScsiBlockPtr blockptr[];
+    ScsiBlockPtr pt;   /* block pointer to program table */
 } __attribute__ ((packed)) ScsiMbr;
 
 #define ZIPL_MAGIC              "zIPL"
Signature · 1 line
2.7.4
#2 lore raw

PATCH v9 2/13 s390-ccw: refactor eckd_block_num to use CHS

In reply to Collin L. Walling

Add new cylinder/head/sector struct. Use it to calculate eckd block numbers instead of a BootMapPointer (which used eckd chs anyway).

---
 pc-bios/s390-ccw/bootmap.c | 28 ++++++++++++++--------------
 pc-bios/s390-ccw/bootmap.h |  8 ++++++--
 2 files changed, 20 insertions(+), 16 deletions(-)
pc-bios/s390-ccw/bootmap.c +14 -14
index a4eaf24..9534f56 100644
@@ -95,32 +95,32 @@ static inline void verify_boot_info(BootInfo *bip)
                "Bad block size in zIPL section of the 1st record.");
 }
 
-static block_number_t eckd_block_num(BootMapPointer *p)
+static block_number_t eckd_block_num(EckdCHS *chs)
 {
     const uint64_t sectors = virtio_get_sectors();
     const uint64_t heads = virtio_get_heads();
-    const uint64_t cylinder = p->eckd.cylinder
-                            + ((p->eckd.head & 0xfff0) << 12);
-    const uint64_t head = p->eckd.head & 0x000f;
+    const uint64_t cylinder = chs->cylinder
+                            + ((chs->head & 0xfff0) << 12);
+    const uint64_t head = chs->head & 0x000f;
     const block_number_t block = sectors * heads * cylinder
                                + sectors * head
-                               + p->eckd.sector
+                               + chs->sector
                                - 1; /* block nr starts with zero */
     return block;
 }
 
 static bool eckd_valid_address(BootMapPointer *p)
 {
-    const uint64_t head = p->eckd.head & 0x000f;
+    const uint64_t head = p->eckd.chs.head & 0x000f;
 
     if (head >= virtio_get_heads()
-        ||  p->eckd.sector > virtio_get_sectors()
-        ||  p->eckd.sector <= 0) {
+        ||  p->eckd.chs.sector > virtio_get_sectors()
+        ||  p->eckd.chs.sector <= 0) {
         return false;
     }
 
     if (!virtio_guessed_disk_nature() &&
-        eckd_block_num(p) >= virtio_get_blocks()) {
+        eckd_block_num(&p->eckd.chs) >= virtio_get_blocks()) {
         return false;
     }
 
@@ -140,7 +140,7 @@ static block_number_t load_eckd_segments(block_number_t blk, uint64_t *address)
     do {
         more_data = false;
         for (j = 0;; j++) {
-            block_nr = eckd_block_num((void *)&(bprs[j].xeckd));
+            block_nr = eckd_block_num(&bprs[j].xeckd.bptr.chs);
             if (is_null_block_number(block_nr)) { /* end of chunk */
                 break;
             }
@@ -198,7 +198,7 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr)
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(bmt_block_nr, sec, "Cannot read Boot Map Table");
 
-    block_nr = eckd_block_num(&bmt->entry[loadparm]);
+    block_nr = eckd_block_num(&bmt->entry[loadparm].xeckd.bptr.chs);
     IPL_assert(block_nr != -1, "Cannot find Boot Map Table Entry");
 
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
@@ -206,7 +206,7 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr)
 
     for (i = 0; bms->entry[i].type == BOOT_SCRIPT_LOAD; i++) {
         address = bms->entry[i].address.load_address;
-        block_nr = eckd_block_num(&(bms->entry[i].blkptr));
+        block_nr = eckd_block_num(&bms->entry[i].blkptr.xeckd.bptr.chs);
 
         do {
             block_nr = load_eckd_segments(block_nr, &address);
@@ -239,7 +239,7 @@ static void ipl_eckd_cdl(void)
                "Non-ECKD device type in zIPL section of IPL2 record.");
 
     /* save pointer to Boot Map Table */
-    bmt_block_nr = eckd_block_num(&mbr->blockptr);
+    bmt_block_nr = eckd_block_num(&mbr->blockptr.xeckd.bptr.chs);
 
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(2, vlbl, "Cannot read Volume Label at block 2");
@@ -300,7 +300,7 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
     verify_boot_info(bip);
 
     /* save pointer to Boot Map Table */
-    bmt_block_nr = eckd_block_num((void *)&bip->bp.ipl.bm_ptr.eckd.bptr);
+    bmt_block_nr = eckd_block_num(&bip->bp.ipl.bm_ptr.eckd.bptr.chs);
 
     run_eckd_boot_script(bmt_block_nr);
     /* no return */
pc-bios/s390-ccw/bootmap.h +6 -2
index 486c0f3..b361084 100644
@@ -32,10 +32,14 @@ typedef struct FbaBlockPtr {
     uint16_t blockct;
 } __attribute__ ((packed)) FbaBlockPtr;
 
-typedef struct EckdBlockPtr {
-    uint16_t cylinder; /* cylinder/head/sector is an address of the block */
+typedef struct EckdCHS {
+    uint16_t cylinder;
     uint16_t head;
     uint8_t sector;
+} __attribute__ ((packed)) EckdCHS;
+
+typedef struct EckdBlockPtr {
+    EckdCHS chs; /* cylinder/head/sector is an address of the block */
     uint16_t size;
     uint8_t count; /* (size_in_blocks-1);
                     * it's 0 for TablePtr, ScriptPtr, and SectionPtr */
Signature · 1 line
2.7.4
#3 lore raw

PATCH v9 3/13 s390-ccw: refactor IPL structs

In reply to Collin L. Walling

ECKD DASDs have different IPL structures for CDL and LDL formats. The current Ipl1 and Ipl2 structs follow the CDL format, so we prepend "EckdCdl" to them. Boot info for LDL has been moved to a new struct: EckdLdlIpl1.

---
 pc-bios/s390-ccw/bootmap.c | 12 ++++++------
 pc-bios/s390-ccw/bootmap.h | 37 +++++++++++++++++++++----------------
 2 files changed, 27 insertions(+), 22 deletions(-)
pc-bios/s390-ccw/bootmap.c +6 -6
index 9534f56..a94638d 100644
@@ -221,7 +221,7 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr)
 static void ipl_eckd_cdl(void)
 {
     XEckdMbr *mbr;
-    Ipl2 *ipl2 = (void *)sec;
+    EckdCdlIpl2 *ipl2 = (void *)sec;
     IplVolumeLabel *vlbl = (void *)sec;
     block_number_t bmt_block_nr;
 
@@ -231,7 +231,7 @@ static void ipl_eckd_cdl(void)
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(1, ipl2, "Cannot read IPL2 record at block 1");
 
-    mbr = &ipl2->u.x.mbr;
+    mbr = &ipl2->mbr;
     IPL_assert(magic_match(mbr, ZIPL_MAGIC), "No zIPL section in IPL2 record.");
     IPL_assert(block_size_ok(mbr->blockptr.xeckd.bptr.size),
                "Bad block size in zIPL section of IPL2 record.");
@@ -281,7 +281,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode)
 static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
 {
     block_number_t bmt_block_nr;
-    BootInfo *bip = (void *)(sec + 0x70); /* BootInfo is MBR for LDL */
+    EckdLdlIpl1 *ipl1 = (void *)sec;
 
     if (mode != ECKD_LDL_UNLABELED) {
         print_eckd_ldl_msg(mode);
@@ -292,15 +292,15 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(0, sec, "Cannot read block 0 to grab boot info.");
     if (mode == ECKD_LDL_UNLABELED) {
-        if (!magic_match(bip->magic, ZIPL_MAGIC)) {
+        if (!magic_match(ipl1->bip.magic, ZIPL_MAGIC)) {
             return; /* not applicable layout */
         }
         sclp_print("unlabeled LDL.\n");
     }
-    verify_boot_info(bip);
+    verify_boot_info(&ipl1->bip);
 
     /* save pointer to Boot Map Table */
-    bmt_block_nr = eckd_block_num(&bip->bp.ipl.bm_ptr.eckd.bptr.chs);
+    bmt_block_nr = eckd_block_num(&ipl1->bip.bp.ipl.bm_ptr.eckd.bptr.chs);
 
     run_eckd_boot_script(bmt_block_nr);
     /* no return */
pc-bios/s390-ccw/bootmap.h +21 -16
index b361084..4bd95cd 100644
@@ -239,22 +239,27 @@ typedef struct BootInfo {          /* @ 0x70, record #0    */
     } bp;
 } __attribute__ ((packed)) BootInfo; /* see also XEckdMbr   */
 
-typedef struct Ipl1 {
-    unsigned char key[4]; /* == "IPL1" */
-    unsigned char data[24];
-} __attribute__((packed)) Ipl1;
-
-typedef struct Ipl2 {
-    unsigned char key[4]; /* == "IPL2" */
-    union {
-        unsigned char data[144];
-        struct {
-            unsigned char reserved1[92-4];
-            XEckdMbr mbr;
-            unsigned char reserved2[144-(92-4)-sizeof(XEckdMbr)];
-        } x;
-    } u;
-} __attribute__((packed)) Ipl2;
+/*
+ * Structs for IPL
+ */
+#define STAGE2_BLK_CNT_MAX  24 /* Stage 1b can load up to 24 blocks */
+
+typedef struct EckdCdlIpl1 {
+    uint8_t key[4]; /* == "IPL1" */
+    uint8_t data[24];
+} __attribute__((packed)) EckdCdlIpl1;
+
+typedef struct EckdCdlIpl2 {
+    uint8_t key[4]; /* == "IPL2" */
+    uint8_t reserved0[88];
+    XEckdMbr mbr;
+    uint8_t reserved[24];
+} __attribute__((packed)) EckdCdlIpl2;
+
+typedef struct EckdLdlIpl1 {
+    uint8_t reserved[112];
+    BootInfo bip; /* BootInfo is MBR for LDL */
+} __attribute__((packed)) EckdLdlIpl1;
 
 typedef struct IplVolumeLabel {
     unsigned char key[4]; /* == "VOL1" */
Signature · 1 line
2.7.4
#4 lore raw

PATCH v9 4/13 s390-ccw: update libc

In reply to Collin L. Walling

Moved:
memcmp from bootmap.h to libc.h (renamed from _memcmp) strlen from sclp.c to libc.h (renamed from _strlen)

Added C standard functions:
isdigit

Added non C-standard function:
uitoa
atoui

---
 pc-bios/s390-ccw/Makefile  |  2 +-
 pc-bios/s390-ccw/bootmap.c |  4 +--
 pc-bios/s390-ccw/bootmap.h | 16 +--------
 pc-bios/s390-ccw/libc.c    | 88 ++++++++++++++++++++++++++++++++++++++++++++++
 pc-bios/s390-ccw/libc.h    | 37 +++++++++++++++++--
 pc-bios/s390-ccw/main.c    | 17 +--------
 pc-bios/s390-ccw/sclp.c    | 10 +-----
 7 files changed, 129 insertions(+), 45 deletions(-)
 create mode 100644 pc-bios/s390-ccw/libc.c
pc-bios/s390-ccw/Makefile +1 -1
index 6d0c2ee..9f7904f 100644
@@ -9,7 +9,7 @@ $(call set-vpath, $(SRC_PATH)/pc-bios/s390-ccw)
 
 .PHONY : all clean build-all
 
-OBJECTS = start.o main.o bootmap.o sclp.o virtio.o virtio-scsi.o virtio-blkdev.o
+OBJECTS = start.o main.o bootmap.o sclp.o virtio.o virtio-scsi.o virtio-blkdev.o libc.o
 QEMU_CFLAGS := $(filter -W%, $(QEMU_CFLAGS))
 QEMU_CFLAGS += -ffreestanding -fno-delete-null-pointer-checks -msoft-float
 QEMU_CFLAGS += -march=z900 -fPIE -fno-strict-aliasing
pc-bios/s390-ccw/bootmap.c +2 -2
index a94638d..092fb35 100644
@@ -506,7 +506,7 @@ static bool is_iso_bc_entry_compatible(IsoBcSection *s)
                     "Failed to read image sector 0");
 
     /* Checking bytes 8 - 32 for S390 Linux magic */
-    return !_memcmp(magic_sec + 8, linux_s390_magic, 24);
+    return !memcmp(magic_sec + 8, linux_s390_magic, 24);
 }
 
 /* Location of the current sector of the directory */
@@ -635,7 +635,7 @@ static uint32_t find_iso_bc(void)
         if (vd->type == VOL_DESC_TYPE_BOOT) {
             IsoVdElTorito *et = &vd->vd.boot;
 
-            if (!_memcmp(&et->el_torito[0], el_torito_magic, 32)) {
+            if (!memcmp(&et->el_torito[0], el_torito_magic, 32)) {
                 return bswap32(et->bc_offset);
             }
         }
pc-bios/s390-ccw/bootmap.h +1 -15
index 4bd95cd..4cf7e1e 100644
@@ -328,20 +328,6 @@ static inline bool magic_match(const void *data, const void *magic)
     return *((uint32_t *)data) == *((uint32_t *)magic);
 }
 
-static inline int _memcmp(const void *s1, const void *s2, size_t n)
-{
-    int i;
-    const uint8_t *p1 = s1, *p2 = s2;
-
-    for (i = 0; i < n; i++) {
-        if (p1[i] != p2[i]) {
-            return p1[i] > p2[i] ? 1 : -1;
-        }
-    }
-
-    return 0;
-}
-
 static inline uint32_t iso_733_to_u32(uint64_t x)
 {
     return (uint32_t)x;
@@ -434,7 +420,7 @@ const uint8_t vol_desc_magic[] = "CD001";
 
 static inline bool is_iso_vd_valid(IsoVolDesc *vd)
 {
-    return !_memcmp(&vd->ident[0], vol_desc_magic, 5) &&
+    return !memcmp(&vd->ident[0], vol_desc_magic, 5) &&
            vd->version == 0x1 &&
            vd->type <= VOL_DESC_TYPE_PARTITION;
 }
pc-bios/s390-ccw/libc.c new file +88 -0

88 lines not on this page · raw message

pc-bios/s390-ccw/libc.h +35 -2
index 0142ea8..63ece70 100644
@@ -1,6 +1,8 @@
 /*
  * libc-style definitions and functions
  *
+ * Copyright (c) 2013 Alexander Graf <[email protected]>
+ *
  * This code is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -19,7 +21,7 @@ typedef unsigned long long uint64_t;
 
 static inline void *memset(void *s, int c, size_t n)
 {
-    int i;
+    size_t i;
     unsigned char *p = s;
 
     for (i = 0; i < n; i++) {
@@ -33,7 +35,7 @@ static inline void *memcpy(void *s1, const void *s2, size_t n)
 {
     uint8_t *dest = s1;
     const uint8_t *src = s2;
-    int i;
+    size_t i;
 
     for (i = 0; i < n; i++) {
         dest[i] = src[i];
@@ -42,4 +44,35 @@ static inline void *memcpy(void *s1, const void *s2, size_t n)
     return s1;
 }
 
+static inline int memcmp(const void *s1, const void *s2, size_t n)
+{
+    size_t i;
+    const uint8_t *p1 = s1, *p2 = s2;
+
+    for (i = 0; i < n; i++) {
+        if (p1[i] != p2[i]) {
+            return p1[i] > p2[i] ? 1 : -1;
+        }
+    }
+
+    return 0;
+}
+
+static inline size_t strlen(const char *str)
+{
+    size_t i;
+    for (i = 0; *str; i++) {
+        str++;
+    }
+    return i;
+}
+
+static inline int isdigit(int c)
+{
+    return (c >= '0') && (c <= '9');
+}
+
+uint64_t atoui(const char *str);
+char *uitoa(uint64_t num, char *str, size_t len);
+
 #endif
pc-bios/s390-ccw/main.c +1 -16
index 401e9db..e857ce4 100644
@@ -40,22 +40,7 @@ void panic(const char *string)
 
 unsigned int get_loadparm_index(void)
 {
-    const char *lp = loadparm;
-    int i;
-    unsigned int idx = 0;
-
-    for (i = 0; i < 8; i++) {
-        char c = lp[i];
-
-        if (c < '0' || c > '9') {
-            break;
-        }
-
-        idx *= 10;
-        idx += c - '0';
-    }
-
-    return idx;
+    return atoui(loadparm);
 }
 
 static bool find_dev(Schib *schib, int dev_no)
pc-bios/s390-ccw/sclp.c +1 -9
index 90d1bc3..e6a0898 100644
@@ -65,14 +65,6 @@ void sclp_setup(void)
     sclp_set_write_mask();
 }
 
-static int _strlen(const char *str)
-{
-    int i;
-    for (i = 0; *str; i++)
-        str++;
-    return i;
-}
-
 long write(int fd, const void *str, size_t len)
 {
     WriteEventData *sccb = (void *)_sccb;
@@ -113,7 +105,7 @@ long write(int fd, const void *str, size_t len)
 
 void sclp_print(const char *str)
 {
-    write(1, str, _strlen(str));
+    write(1, str, strlen(str));
 }
 
 void sclp_get_loadparm_ascii(char *loadparm)
Signature · 1 line
2.7.4
#5 lore raw

PATCH v9 5/13 s390-ccw: move auxiliary IPL data to separate location

In reply to Collin L. Walling

The s390-ccw firmware needs some information in support of the boot process which is not available on the native machine. Examples are the netboot firmware load address and now the boot menu parameters.

While storing that data in unused fields of the IPL parameter block works, that approach could create problems if the parameter block definition should change in the future. Because then a guest could overwrite these fields using the set IPLB diagnose.

In fact the data in question is of more global nature and not really tied to an IPL device, so separating it is rather logical.

This commit introduces a new structure to hold firmware relevant IPL parameters set by QEMU. The data is stored at location 204 (dec) and can contain up to 7 32-bit words. This area is available to programming in the z/Architecture Principles of Operation and can thus safely be used by the firmware until the IPL has completed.

---
 hw/s390x/ipl.c          | 18 +++++++++++++++++-
 hw/s390x/ipl.h          | 25 +++++++++++++++++++++++--
 pc-bios/s390-ccw/iplb.h | 18 ++++++++++++++++--
 pc-bios/s390-ccw/main.c |  6 +++++-
 4 files changed, 61 insertions(+), 6 deletions(-)
hw/s390x/ipl.c +17 -1
index 0d06fc1..79f5a58 100644
@@ -399,6 +399,21 @@ void s390_reipl_request(void)
     qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 }
 
+static void s390_ipl_prepare_qipl(S390CPU *cpu)
+{
+    S390IPLState *ipl = get_ipl_device();
+    uint8_t *addr;
+    uint64_t len = 4096;
+
+    addr = cpu_physical_memory_map(cpu->env.psa, &len, 1);
+    if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
+        error_report("Cannot set QEMU IPL parameters");
+        return;
+    }
+    memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
+    cpu_physical_memory_unmap(addr, len, 1, len);
+}
+
 void s390_ipl_prepare_cpu(S390CPU *cpu)
 {
     S390IPLState *ipl = get_ipl_device();
@@ -418,8 +433,9 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
             error_report_err(err);
             vm_stop(RUN_STATE_INTERNAL_ERROR);
         }
-        ipl->iplb.ccw.netboot_start_addr = cpu_to_be64(ipl->start_addr);
+        ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
     }
+    s390_ipl_prepare_qipl(cpu);
 }
 
 static void s390_ipl_reset(DeviceState *dev)
hw/s390x/ipl.h +23 -2
index 8a705e0..08926a3 100644
@@ -16,8 +16,7 @@
 #include "cpu.h"
 
 struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
     uint8_t  ssid;
     uint16_t devno;
     uint8_t  vm_flags;
@@ -90,6 +89,27 @@ void s390_ipl_prepare_cpu(S390CPU *cpu);
 IplParameterBlock *s390_ipl_get_iplb(void);
 void s390_reipl_request(void);
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * The QEMU IPL Parameters will be stored at absolute address
+ * 204 (0xcc) which means it is 32-bit word aligned but not
+ * double-word aligned.
+ * Placement of data fields in this area must account for
+ * their alignment needs. E.g., netboot_start_address must
+ * have an offset of n * 8 bytes within the struct in order
+ * to keep it double-word aligned.
+ * The total size of the struct must never exceed 28 bytes.
+ * This definition must be kept in sync with the defininition
+ * in pc-bios/s390-ccw/iplb.h.
+ */
+struct QemuIplParameters {
+    uint8_t  reserved1[4];
+    uint64_t netboot_start_addr;
+    uint8_t  reserved2[16];
+} QEMU_PACKED;
+typedef struct QemuIplParameters QemuIplParameters;
+
 #define TYPE_S390_IPL "s390-ipl"
 #define S390_IPL(obj) OBJECT_CHECK(S390IPLState, (obj), TYPE_S390_IPL)
 
@@ -105,6 +125,7 @@ struct S390IPLState {
     bool iplb_valid;
     bool reipl_requested;
     bool netboot;
+    QemuIplParameters qipl;
 
     /*< public >*/
     char *kernel;
pc-bios/s390-ccw/iplb.h +16 -2
index 890aed9..31d2934 100644
@@ -13,8 +13,7 @@
 #define IPLB_H
 
 struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
     uint8_t  ssid;
     uint16_t devno;
     uint8_t  vm_flags;
@@ -73,6 +72,21 @@ typedef struct IplParameterBlock IplParameterBlock;
 
 extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * This definition must be kept in sync with the defininition
+ * in hw/s390x/ipl.h
+ */
+struct QemuIplParameters {
+    uint8_t  reserved1[4];
+    uint64_t netboot_start_addr;
+    uint8_t  reserved2[16];
+} __attribute__ ((packed));
+typedef struct QemuIplParameters QemuIplParameters;
+
+extern QemuIplParameters qipl;
+
 #define S390_IPL_TYPE_FCP 0x00
 #define S390_IPL_TYPE_CCW 0x02
 #define S390_IPL_TYPE_QEMU_SCSI 0xff
pc-bios/s390-ccw/main.c +5 -1
index e857ce4..e41b264 100644
@@ -16,6 +16,7 @@ char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
 static SubChannelId blk_schid = { .one = 1 };
 IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 static char loadparm[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+QemuIplParameters qipl;
 
 /*
  * Priniciples of Operations (SA22-7832-09) chapter 17 requires that
@@ -81,6 +82,7 @@ static void virtio_setup(void)
     uint16_t dev_no;
     char ldp[] = "LOADPARM=[________]\n";
     VDev *vdev = virtio_get_device();
+    QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
 
     /*
      * We unconditionally enable mss support. In every sane configuration,
@@ -93,6 +95,8 @@ static void virtio_setup(void)
     memcpy(ldp + 10, loadparm, 8);
     sclp_print(ldp);
 
+    memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+
     if (store_iplb(&iplb)) {
         switch (iplb.pbt) {
         case S390_IPL_TYPE_CCW:
@@ -127,7 +131,7 @@ static void virtio_setup(void)
 
     if (virtio_get_device_type() == VIRTIO_ID_NET) {
         sclp_print("Network boot device detected\n");
-        vdev->netboot_start_addr = iplb.ccw.netboot_start_addr;
+        vdev->netboot_start_addr = qipl.netboot_start_addr;
     } else {
         virtio_blk_setup_device(blk_schid);
 
Signature · 1 line
2.7.4
#6 lore raw

Re: [Qemu-devel] [PATCH v9 05/13] s390-ccw: move auxiliary IPL data to separate location

Quoted 83 lines · Collin L. Walling

The s390-ccw firmware needs some information in support of the boot process which is not available on the native machine. Examples are the netboot firmware load address and now the boot menu parameters.

While storing that data in unused fields of the IPL parameter block works, that approach could create problems if the parameter block definition should change in the future. Because then a guest could overwrite these fields using the set IPLB diagnose.

In fact the data in question is of more global nature and not really tied to an IPL device, so separating it is rather logical.

This commit introduces a new structure to hold firmware relevant IPL parameters set by QEMU. The data is stored at location 204 (dec) and can contain up to 7 32-bit words. This area is available to programming in the z/Architecture Principles of Operation and can thus safely be used by the firmware until the IPL has completed.

---
 hw/s390x/ipl.c          | 18 +++++++++++++++++-
 hw/s390x/ipl.h          | 25 +++++++++++++++++++++++--
 pc-bios/s390-ccw/iplb.h | 18 ++++++++++++++++--
 pc-bios/s390-ccw/main.c |  6 +++++-
 4 files changed, 61 insertions(+), 6 deletions(-)
hw/s390x/ipl.c +17 -1
index 0d06fc1..79f5a58 100644
@@ -399,6 +399,21 @@ void s390_reipl_request(void)
     qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 }
 
+static void s390_ipl_prepare_qipl(S390CPU *cpu)
+{
+    S390IPLState *ipl = get_ipl_device();
+    uint8_t *addr;
+    uint64_t len = 4096;
+
+    addr = cpu_physical_memory_map(cpu->env.psa, &len, 1);
+    if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
+        error_report("Cannot set QEMU IPL parameters");
+        return;
+    }
+    memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
+    cpu_physical_memory_unmap(addr, len, 1, len);
+}
+
 void s390_ipl_prepare_cpu(S390CPU *cpu)
 {
     S390IPLState *ipl = get_ipl_device();
@@ -418,8 +433,9 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
             error_report_err(err);
             vm_stop(RUN_STATE_INTERNAL_ERROR);
         }
-        ipl->iplb.ccw.netboot_start_addr = cpu_to_be64(ipl->start_addr);
+        ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
     }
+    s390_ipl_prepare_qipl(cpu);
 }
 
 static void s390_ipl_reset(DeviceState *dev)
hw/s390x/ipl.h +1 -2
index 8a705e0..08926a3 100644
@@ -16,8 +16,7 @@
 #include "cpu.h"
 
 struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
     uint8_t  ssid;
     uint16_t devno;
     uint8_t  vm_flags;
@@ -90,6 +89,27 @@ void s390_ipl_prepare_cpu(S390CPU *cpu);
 IplParameterBlock *s390_ipl_get_iplb(void);
 void s390_reipl_request(void);

hw/s390x/ipl.h void s390_ipl_prepare_cpu(S390CPU *cpu); · line 100

Quoted 10 lines
hw/s390x/ipl.h +9 -0
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * The QEMU IPL Parameters will be stored at absolute address
+ * 204 (0xcc) which means it is 32-bit word aligned but not
+ * double-word aligned.
+ * Placement of data fields in this area must account for
+ * their alignment needs. E.g., netboot_start_address must
+ * have an offset of n * 8 bytes within the struct in order

Please replace "n * 8" with "4 + n * 8" in your tree. I can fix it up manually again, but in case we need a v10 ...

Thomas

#7 lore raw

Re: [Qemu-devel] [PATCH v9 05/13] s390-ccw: move auxiliary IPL data to separate location

Quoted 97 lines · Thomas Huth
Quoted 83 lines · Collin L. Walling

The s390-ccw firmware needs some information in support of the boot process which is not available on the native machine. Examples are the netboot firmware load address and now the boot menu parameters.

While storing that data in unused fields of the IPL parameter block works, that approach could create problems if the parameter block definition should change in the future. Because then a guest could overwrite these fields using the set IPLB diagnose.

In fact the data in question is of more global nature and not really tied to an IPL device, so separating it is rather logical.

This commit introduces a new structure to hold firmware relevant IPL parameters set by QEMU. The data is stored at location 204 (dec) and can contain up to 7 32-bit words. This area is available to programming in the z/Architecture Principles of Operation and can thus safely be used by the firmware until the IPL has completed.

---
  hw/s390x/ipl.c          | 18 +++++++++++++++++-
  hw/s390x/ipl.h          | 25 +++++++++++++++++++++++--
  pc-bios/s390-ccw/iplb.h | 18 ++++++++++++++++--
  pc-bios/s390-ccw/main.c |  6 +++++-
  4 files changed, 61 insertions(+), 6 deletions(-)
hw/s390x/ipl.c +17 -1
index 0d06fc1..79f5a58 100644
@@ -399,6 +399,21 @@ void s390_reipl_request(void)
      qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
  }
 
+static void s390_ipl_prepare_qipl(S390CPU *cpu)
+{
+    S390IPLState *ipl = get_ipl_device();
+    uint8_t *addr;
+    uint64_t len = 4096;
+
+    addr = cpu_physical_memory_map(cpu->env.psa, &len, 1);
+    if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
+        error_report("Cannot set QEMU IPL parameters");
+        return;
+    }
+    memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
+    cpu_physical_memory_unmap(addr, len, 1, len);
+}
+
  void s390_ipl_prepare_cpu(S390CPU *cpu)
  {
      S390IPLState *ipl = get_ipl_device();
@@ -418,8 +433,9 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
              error_report_err(err);
              vm_stop(RUN_STATE_INTERNAL_ERROR);
          }
-        ipl->iplb.ccw.netboot_start_addr = cpu_to_be64(ipl->start_addr);
+        ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
      }
+    s390_ipl_prepare_qipl(cpu);
  }
 
  static void s390_ipl_reset(DeviceState *dev)
hw/s390x/ipl.h +1 -2
index 8a705e0..08926a3 100644
@@ -16,8 +16,7 @@
  #include "cpu.h"
 
  struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
      uint8_t  ssid;
      uint16_t devno;
      uint8_t  vm_flags;
@@ -90,6 +89,27 @@ void s390_ipl_prepare_cpu(S390CPU *cpu);
  IplParameterBlock *s390_ipl_get_iplb(void);
  void s390_reipl_request(void);

hw/s390x/ipl.h void s390_ipl_prepare_cpu(S390CPU *cpu); · line 100

Quoted 10 lines
hw/s390x/ipl.h +9 -0
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * The QEMU IPL Parameters will be stored at absolute address
+ * 204 (0xcc) which means it is 32-bit word aligned but not
+ * double-word aligned.
+ * Placement of data fields in this area must account for
+ * their alignment needs. E.g., netboot_start_address must
+ * have an offset of n * 8 bytes within the struct in order

Please replace "n * 8" with "4 + n * 8" in your tree. I can fix it up manually again, but in case we need a v10 ...

Quoted 2 lines

Thomas

Fixed just in case (along with the missing break for 13/13). Thank you for reminding me.

Signature · 1 line
- Collin L Walling
#8 lore raw

PATCH v9 6/13 s390-ccw: parse and set boot menu options

In reply to Collin L. Walling

Set boot menu options for an s390 guest and store them in the iplb. These options are set via the QEMU command line option:

-boot menu=on|off[,splash-time=X]

or via the libvirt domain xml:

    <os>
      <bootmenu enable='yes|no' timeout='X'/>
    </os>

Where X represents some positive integer representing milliseconds.

Any value set for loadparm will override all boot menu options. If loadparm=PROMPT, then the menu will be enabled without a timeout.

---
 hw/s390x/ipl.c          | 52 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/s390x/ipl.h          |  9 +++++++--
 pc-bios/s390-ccw/iplb.h |  9 +++++++--
 3 files changed, 66 insertions(+), 4 deletions(-)
hw/s390x/ipl.c +52 -0
index 79f5a58..ee2039d 100644
@@ -23,6 +23,9 @@
 #include "hw/s390x/ebcdic.h"
 #include "ipl.h"
 #include "qemu/error-report.h"
+#include "qemu/config-file.h"
+#include "qemu/cutils.h"
+#include "qemu/option.h"
 
 #define KERN_IMAGE_START                0x010000UL
 #define KERN_PARM_AREA                  0x010480UL
@@ -219,6 +222,54 @@ static Property s390_ipl_properties[] = {
     DEFINE_PROP_END_OF_LIST(),
 };
 
+static void s390_ipl_set_boot_menu(S390IPLState *ipl)
+{
+    QemuOptsList *plist = qemu_find_opts("boot-opts");
+    QemuOpts *opts = QTAILQ_FIRST(&plist->head);
+    uint8_t *flags = &ipl->qipl.qipl_flags;
+    uint32_t *timeout = &ipl->qipl.boot_menu_timeout;
+    const char *tmp;
+    unsigned long splash_time = 0;
+
+    if (!get_boot_device(0)) {
+        if (boot_menu) {
+            error_report("boot menu requires a bootindex to be specified for "
+                         "the IPL device.");
+        }
+        return;
+    }
+
+    switch (ipl->iplb.pbt) {
+    case S390_IPL_TYPE_CCW:
+        break;
+    default:
+        error_report("boot menu is not supported for this device type.");
+        return;
+    }
+
+    if (!boot_menu) {
+        return;
+    }
+
+    *flags |= QIPL_FLAG_BM_OPTS_CMD;
+
+    tmp = qemu_opt_get(opts, "splash-time");
+
+    if (tmp && qemu_strtoul(tmp, NULL, 10, &splash_time)) {
+        error_report("splash-time is invalid, forcing it to 0.");
+        *timeout = 0;
+        return;
+    }
+
+    if (splash_time > 0xffffffff) {
+        error_report("splash-time is too large, forcing it to max value.");
+        *timeout = 0xffffffff;
+        return;
+    }
+
+    *timeout = cpu_to_be32(splash_time);
+}
+
 static bool s390_gen_initial_iplb(S390IPLState *ipl)
 {
     DeviceState *dev_st;
@@ -435,6 +486,7 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
         }
         ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
     }
+    s390_ipl_set_boot_menu(ipl);
     s390_ipl_prepare_qipl(cpu);
 }
 
hw/s390x/ipl.h +7 -2
index 08926a3..3a37924 100644
@@ -91,6 +91,9 @@ void s390_reipl_request(void);
 
 #define QIPL_ADDRESS  0xcc
 
+/* Boot Menu flags */
+#define QIPL_FLAG_BM_OPTS_CMD   0x80
+
 /*
  * The QEMU IPL Parameters will be stored at absolute address
  * 204 (0xcc) which means it is 32-bit word aligned but not
@@ -104,9 +107,11 @@ void s390_reipl_request(void);
  * in pc-bios/s390-ccw/iplb.h.
  */
 struct QemuIplParameters {
-    uint8_t  reserved1[4];
+    uint8_t  qipl_flags;
+    uint8_t  reserved1[3];
     uint64_t netboot_start_addr;
-    uint8_t  reserved2[16];
+    uint32_t boot_menu_timeout;
+    uint8_t  reserved2[12];
 } QEMU_PACKED;
 typedef struct QemuIplParameters QemuIplParameters;
 
pc-bios/s390-ccw/iplb.h +7 -2
index 31d2934..832bb94 100644
@@ -74,14 +74,19 @@ extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 
 #define QIPL_ADDRESS  0xcc
 
+/* Boot Menu flags */
+#define QIPL_FLAG_BM_OPTS_CMD   0x80
+
 /*
  * This definition must be kept in sync with the defininition
  * in hw/s390x/ipl.h
  */
 struct QemuIplParameters {
-    uint8_t  reserved1[4];
+    uint8_t  qipl_flags;
+    uint8_t  reserved1[3];
     uint64_t netboot_start_addr;
-    uint8_t  reserved2[16];
+    uint32_t boot_menu_timeout;
+    uint8_t  reserved2[12];
 } __attribute__ ((packed));
 typedef struct QemuIplParameters QemuIplParameters;
 
Signature · 1 line
2.7.4
#9 lore raw

PATCH v9 7/13 s390-ccw: set up interactive boot menu parameters

In reply to Collin L. Walling

Reads boot menu flag and timeout values from the iplb and sets the respective fields for the menu.

---
 pc-bios/s390-ccw/Makefile   |  2 +-
 pc-bios/s390-ccw/main.c     | 24 ++++++++++++++++++++++++
 pc-bios/s390-ccw/menu.c     | 22 ++++++++++++++++++++++
 pc-bios/s390-ccw/s390-ccw.h |  3 +++
 4 files changed, 50 insertions(+), 1 deletion(-)
 create mode 100644 pc-bios/s390-ccw/menu.c
pc-bios/s390-ccw/Makefile +1 -1
index 9f7904f..1712c2d 100644
@@ -9,7 +9,7 @@ $(call set-vpath, $(SRC_PATH)/pc-bios/s390-ccw)
 
 .PHONY : all clean build-all
 
-OBJECTS = start.o main.o bootmap.o sclp.o virtio.o virtio-scsi.o virtio-blkdev.o libc.o
+OBJECTS = start.o main.o bootmap.o sclp.o virtio.o virtio-scsi.o virtio-blkdev.o libc.o menu.o
 QEMU_CFLAGS := $(filter -W%, $(QEMU_CFLAGS))
 QEMU_CFLAGS += -ffreestanding -fno-delete-null-pointer-checks -msoft-float
 QEMU_CFLAGS += -march=z900 -fPIE -fno-strict-aliasing
pc-bios/s390-ccw/main.c +24 -0
index e41b264..32ed70e 100644
@@ -18,6 +18,9 @@ IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 static char loadparm[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
 QemuIplParameters qipl;
 
+#define LOADPARM_PROMPT "PROMPT  "
+#define LOADPARM_EMPTY  "........"
+
 /*
  * Priniciples of Operations (SA22-7832-09) chapter 17 requires that
  * a subsystem-identification is at 184-187 and bytes 188-191 are zero
@@ -74,6 +77,26 @@ static bool find_dev(Schib *schib, int dev_no)
     return false;
 }
 
+static void menu_setup(void)
+{
+    if (memcmp(loadparm, LOADPARM_PROMPT, 8) == 0) {
+        menu_set_parms(QIPL_FLAG_BM_OPTS_CMD, 0);
+        return;
+    }
+
+    /* If loadparm was set to any other value, then do not enable menu */
+    if (memcmp(loadparm, LOADPARM_EMPTY, 8) != 0) {
+        return;
+    }
+
+    switch (iplb.pbt) {
+    case S390_IPL_TYPE_CCW:
+        menu_set_parms(qipl.qipl_flags & QIPL_FLAG_BM_OPTS_CMD,
+                       qipl.boot_menu_timeout);
+        return;
+    }
+}
+
 static void virtio_setup(void)
 {
     Schib schib;
@@ -117,6 +140,7 @@ static void virtio_setup(void)
         default:
             panic("List-directed IPL not supported yet!\n");
         }
+        menu_setup();
     } else {
         for (ssid = 0; ssid < 0x3; ssid++) {
             blk_schid.ssid = ssid;
pc-bios/s390-ccw/menu.c new file +22 -0
new file mode 100644
index 0000000..1ce33dd
@@ -0,0 +1,22 @@
+/*
+ * QEMU S390 Interactive Boot Menu
+ *
+ * Copyright 2018 IBM Corp.
+ * Author: Collin L. Walling <[email protected]>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "libc.h"
+#include "s390-ccw.h"
+
+static uint8_t flag;
+static uint64_t timeout;
+
+void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
+{
+    flag = boot_menu_flag;
+    timeout = boot_menu_timeout;
+}
pc-bios/s390-ccw/s390-ccw.h +3 -0
index 25d4d21..6cfd4b2 100644
@@ -84,6 +84,9 @@ ulong get_second(void);
 /* bootmap.c */
 void zipl_load(void);
 
+/* menu.c */
+void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout);
+
 static inline void fill_hex(char *out, unsigned char val)
 {
     const char hex[] = "0123456789abcdef";
Signature · 1 line
2.7.4
#10 lore raw

PATCH v9 8/13 s390-ccw: read stage2 boot loader data to find menu

In reply to Collin L. Walling

Read the stage2 boot loader data block-by-block. We scan the current block for the string "zIPL" to detect the start of the boot menu banner. We then load the adjacent blocks (previous block and next block) to account for the possibility of menu data spanning multiple blocks.

---
 pc-bios/s390-ccw/bootmap.c  | 94 ++++++++++++++++++++++++++++++++++++++++++---
 pc-bios/s390-ccw/bootmap.h  | 23 ++++++++++-
 pc-bios/s390-ccw/menu.c     | 10 +++++
 pc-bios/s390-ccw/s390-ccw.h |  2 +
 4 files changed, 122 insertions(+), 7 deletions(-)
pc-bios/s390-ccw/bootmap.c +89 -5
index 092fb35..ae93b55 100644
@@ -83,6 +83,10 @@ static void jump_to_IPL_code(uint64_t address)
 
 static unsigned char _bprs[8*1024]; /* guessed "max" ECKD sector size */
 static const int max_bprs_entries = sizeof(_bprs) / sizeof(ExtEckdBlockPtr);
+static uint8_t _s2[MAX_SECTOR_SIZE * 3] __attribute__((__aligned__(PAGE_SIZE)));
+static void *s2_prev_blk = _s2;
+static void *s2_cur_blk = _s2 + MAX_SECTOR_SIZE;
+static void *s2_next_blk = _s2 + MAX_SECTOR_SIZE * 2;
 
 static inline void verify_boot_info(BootInfo *bip)
 {
@@ -182,7 +186,77 @@ static block_number_t load_eckd_segments(block_number_t blk, uint64_t *address)
     return block_nr;
 }
 
-static void run_eckd_boot_script(block_number_t bmt_block_nr)
+static bool find_zipl_boot_menu_banner(int *offset)
+{
+    int i;
+
+    /* Menu banner starts with "zIPL" */
+    for (i = 0; i < virtio_get_block_size() - 4; i++) {
+        if (magic_match(s2_cur_blk + i, ZIPL_MAGIC_EBCDIC)) {
+            *offset = i;
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
+{
+    block_number_t cur_block_nr;
+    block_number_t prev_block_nr = 0;
+    block_number_t next_block_nr = 0;
+    EckdStage1b *s1b = (void *)sec;
+    int banner_offset;
+    int i;
+
+    /* Get Stage1b data */
+    memset(sec, FREE_SPACE_FILLER, sizeof(sec));
+    read_block(s1b_block_nr, s1b, "Cannot read stage1b boot loader");
+
+    memset(_s2, FREE_SPACE_FILLER, sizeof(_s2));
+
+    /* Get Stage2 data */
+    for (i = 0; i < STAGE2_BLK_CNT_MAX; i++) {
+        cur_block_nr = eckd_block_num(&s1b->seek[i].chs);
+
+        if (!cur_block_nr) {
+            break;
+        }
+
+        read_block(cur_block_nr, s2_cur_blk, "Cannot read stage2 boot loader");
+
+        if (find_zipl_boot_menu_banner(&banner_offset)) {
+            /*
+             * Load the adjacent blocks to account for the
+             * possibility of menu data spanning multiple blocks.
+             */
+            if (prev_block_nr) {
+                read_block(prev_block_nr, s2_prev_blk,
+                           "Cannot read stage2 boot loader");
+            }
+
+            if (i + 1 < STAGE2_BLK_CNT_MAX) {
+                next_block_nr = eckd_block_num(&s1b->seek[i + 1].chs);
+            }
+
+            if (next_block_nr) {
+                read_block(next_block_nr, s2_next_blk,
+                           "Cannot read stage2 boot loader");
+            }
+
+            return menu_get_zipl_boot_index(s2_cur_blk + banner_offset);
+        }
+
+        prev_block_nr = cur_block_nr;
+    }
+
+    sclp_print("No zipl boot menu data found. Booting default entry.");
+    return 0;
+}
+
+static void run_eckd_boot_script(block_number_t bmt_block_nr,
+                                 block_number_t s1b_block_nr)
 {
     int i;
     unsigned int loadparm = get_loadparm_index();
@@ -191,6 +265,10 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr)
     BootMapTable *bmt = (void *)sec;
     BootMapScript *bms = (void *)sec;
 
+    if (menu_is_enabled_zipl()) {
+        loadparm = eckd_get_boot_menu_index(s1b_block_nr);
+    }
+
     debug_print_int("loadparm", loadparm);
     IPL_assert(loadparm <= MAX_TABLE_ENTRIES, "loadparm value greater than"
                " maximum number of boot entries allowed");
@@ -223,7 +301,7 @@ static void ipl_eckd_cdl(void)
     XEckdMbr *mbr;
     EckdCdlIpl2 *ipl2 = (void *)sec;
     IplVolumeLabel *vlbl = (void *)sec;
-    block_number_t bmt_block_nr;
+    block_number_t bmt_block_nr, s1b_block_nr;
 
     /* we have just read the block #0 and recognized it as "IPL1" */
     sclp_print("CDL\n");
@@ -241,6 +319,9 @@ static void ipl_eckd_cdl(void)
     /* save pointer to Boot Map Table */
     bmt_block_nr = eckd_block_num(&mbr->blockptr.xeckd.bptr.chs);
 
+    /* save pointer to Stage1b Data */
+    s1b_block_nr = eckd_block_num(&ipl2->stage1.seek[0].chs);
+
     memset(sec, FREE_SPACE_FILLER, sizeof(sec));
     read_block(2, vlbl, "Cannot read Volume Label at block 2");
     IPL_assert(magic_match(vlbl->key, VOL1_MAGIC),
@@ -249,7 +330,7 @@ static void ipl_eckd_cdl(void)
                "Invalid magic of volser block");
     print_volser(vlbl->f.volser);
 
-    run_eckd_boot_script(bmt_block_nr);
+    run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
     /* no return */
 }
 
@@ -280,7 +361,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode)
 
 static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
 {
-    block_number_t bmt_block_nr;
+    block_number_t bmt_block_nr, s1b_block_nr;
     EckdLdlIpl1 *ipl1 = (void *)sec;
 
     if (mode != ECKD_LDL_UNLABELED) {
@@ -302,7 +383,10 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
     /* save pointer to Boot Map Table */
     bmt_block_nr = eckd_block_num(&ipl1->bip.bp.ipl.bm_ptr.eckd.bptr.chs);
 
-    run_eckd_boot_script(bmt_block_nr);
+    /* save pointer to Stage1b Data */
+    s1b_block_nr = eckd_block_num(&ipl1->stage1.seek[0].chs);
+
+    run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
     /* no return */
 }
 
pc-bios/s390-ccw/bootmap.h +21 -2
index 4cf7e1e..c636626 100644
@@ -87,6 +87,7 @@ typedef struct ScsiMbr {
 } __attribute__ ((packed)) ScsiMbr;
 
 #define ZIPL_MAGIC              "zIPL"
+#define ZIPL_MAGIC_EBCDIC       "\xa9\xc9\xd7\xd3"
 #define IPL1_MAGIC "\xc9\xd7\xd3\xf1" /* == "IPL1" in EBCDIC */
 #define IPL2_MAGIC "\xc9\xd7\xd3\xf2" /* == "IPL2" in EBCDIC */
 #define VOL1_MAGIC "\xe5\xd6\xd3\xf1" /* == "VOL1" in EBCDIC */
@@ -249,15 +250,33 @@ typedef struct EckdCdlIpl1 {
     uint8_t data[24];
 } __attribute__((packed)) EckdCdlIpl1;
 
+typedef struct EckdSeekArg {
+    uint16_t pad;
+    EckdCHS chs;
+    uint8_t pad2;
+} __attribute__ ((packed)) EckdSeekArg;
+
+typedef struct EckdStage1b {
+    uint8_t reserved[32 * STAGE2_BLK_CNT_MAX];
+    struct EckdSeekArg seek[STAGE2_BLK_CNT_MAX];
+    uint8_t unused[64];
+} __attribute__ ((packed)) EckdStage1b;
+
+typedef struct EckdStage1 {
+    uint8_t reserved[72];
+    struct EckdSeekArg seek[2];
+} __attribute__ ((packed)) EckdStage1;
+
 typedef struct EckdCdlIpl2 {
     uint8_t key[4]; /* == "IPL2" */
-    uint8_t reserved0[88];
+    struct EckdStage1 stage1;
     XEckdMbr mbr;
     uint8_t reserved[24];
 } __attribute__((packed)) EckdCdlIpl2;
 
 typedef struct EckdLdlIpl1 {
-    uint8_t reserved[112];
+    uint8_t reserved[24];
+    struct EckdStage1 stage1;
     BootInfo bip; /* BootInfo is MBR for LDL */
 } __attribute__((packed)) EckdLdlIpl1;
 
pc-bios/s390-ccw/menu.c +10 -0
index 1ce33dd..c1d242f 100644
@@ -15,8 +15,18 @@
 static uint8_t flag;
 static uint64_t timeout;
 
+int menu_get_zipl_boot_index(const char *menu_data)
+{
+    return 0; /* implemented next patch */
+}
+
 void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
 {
     flag = boot_menu_flag;
     timeout = boot_menu_timeout;
 }
+
+bool menu_is_enabled_zipl(void)
+{
+    return flag & QIPL_FLAG_BM_OPTS_CMD;
+}
pc-bios/s390-ccw/s390-ccw.h +2 -0
index 6cfd4b2..c0dd37f 100644
@@ -86,6 +86,8 @@ void zipl_load(void);
 
 /* menu.c */
 void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout);
+int menu_get_zipl_boot_index(const char *menu_data);
+bool menu_is_enabled_zipl(void);
 
 static inline void fill_hex(char *out, unsigned char val)
 {
Signature · 1 line
2.7.4
#11 lore raw

PATCH v9 9/13 s390-ccw: print zipl boot menu

In reply to Collin L. Walling

When the boot menu options are present and the guest's disk has been configured by the zipl tool, then the user will be presented with an interactive boot menu with labeled entries. An example of what the menu might look like:

zIPL v1.37.1-build-20170714 interactive boot menu.

0. default (linux-4.13.0)

1. linux-4.13.0
2. performance
3. kvm

---
 pc-bios/s390-ccw/menu.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
pc-bios/s390-ccw/menu.c +32 -1
index c1d242f..730d44e 100644
@@ -15,11 +15,42 @@
 static uint8_t flag;
 static uint64_t timeout;
 
-int menu_get_zipl_boot_index(const char *menu_data)
+static int get_boot_index(int entries)
 {
     return 0; /* implemented next patch */
 }
 
+static void zipl_println(const char *data, size_t len)
+{
+    char buf[len + 2];
+
+    ebcdic_to_ascii(data, buf, len);
+    buf[len] = '\n';
+    buf[len + 1] = '\0';
+
+    sclp_print(buf);
+}
+
+int menu_get_zipl_boot_index(const char *menu_data)
+{
+    size_t len;
+    int entries;
+
+    /* Print and count all menu items, including the banner */
+    for (entries = 0; *menu_data; entries++) {
+        len = strlen(menu_data);
+        zipl_println(menu_data, len);
+        menu_data += len + 1;
+
+        if (entries < 2) {
+            sclp_print("\n");
+        }
+    }
+
+    sclp_print("\n");
+    return get_boot_index(entries - 1); /* subtract 1 to exclude banner */
+}
+
 void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
 {
     flag = boot_menu_flag;
Signature · 1 line
2.7.4
#12 lore raw

PATCH v9 10/13 s390-ccw: read user input for boot index via the SCLP console

In reply to Collin L. Walling

Implements an sclp_read function to capture input from the console and a wrapper function that handles parsing certain characters and adding input to a buffer. The input is checked for any erroneous values and is handled appropriately.

A prompt will persist until input is entered or the timeout expires (if one was set). Example:

Please choose (default will boot in 10 seconds):

Correct input will boot the respective boot index. If the user's input is empty, 0, or if the timeout expires, then the default zipl entry will be chosen. If the input is within the range of available boot entries, then the selection will be booted. Any erroneous input will cancel the timeout and re-prompt the user.

---
 pc-bios/s390-ccw/menu.c     | 149 +++++++++++++++++++++++++++++++++++++++++++-
 pc-bios/s390-ccw/s390-ccw.h |   2 +
 pc-bios/s390-ccw/sclp.c     |  19 ++++++
 pc-bios/s390-ccw/virtio.c   |   2 +-
 4 files changed, 170 insertions(+), 2 deletions(-)
pc-bios/s390-ccw/menu.c +148 -1
index 730d44e..b99ff03 100644
@@ -12,12 +12,159 @@
 #include "libc.h"
 #include "s390-ccw.h"
 
+#define KEYCODE_NO_INP '\0'
+#define KEYCODE_ESCAPE '\033'
+#define KEYCODE_BACKSP '\177'
+#define KEYCODE_ENTER  '\r'
+
+#define TOD_CLOCK_MILLISECOND   0x3e8000
+
+#define LOW_CORE_EXTERNAL_INT_ADDR   0x86
+#define CLOCK_COMPARATOR_INT         0X1004
+
 static uint8_t flag;
 static uint64_t timeout;
 
+static inline void enable_clock_int(void)
+{
+    uint64_t tmp = 0;
+
+    asm volatile(
+        "stctg      0,0,%0\n"
+        "oi         6+%0, 0x8\n"
+        "lctlg      0,0,%0"
+        : : "Q" (tmp) : "memory"
+    );
+}
+
+static inline void disable_clock_int(void)
+{
+    uint64_t tmp = 0;
+
+    asm volatile(
+        "stctg      0,0,%0\n"
+        "ni         6+%0, 0xf7\n"
+        "lctlg      0,0,%0"
+        : : "Q" (tmp) : "memory"
+    );
+}
+
+static inline void set_clock_comparator(uint64_t time)
+{
+    asm volatile("sckc %0" : : "Q" (time));
+}
+
+static inline bool check_clock_int(void)
+{
+    uint16_t *code = (uint16_t *)LOW_CORE_EXTERNAL_INT_ADDR;
+
+    consume_sclp_int();
+
+    return *code == CLOCK_COMPARATOR_INT;
+}
+
+static int read_prompt(char *buf, size_t len)
+{
+    char inp[2] = {};
+    uint8_t idx = 0;
+    uint64_t time;
+
+    if (timeout) {
+        time = get_clock() + timeout * TOD_CLOCK_MILLISECOND;
+        set_clock_comparator(time);
+        enable_clock_int();
+        timeout = 0;
+    }
+
+    while (!check_clock_int()) {
+
+        sclp_read(inp, 1); /* Process only one character at a time */
+
+        switch (inp[0]) {
+        case KEYCODE_NO_INP:
+        case KEYCODE_ESCAPE:
+            continue;
+        case KEYCODE_BACKSP:
+            if (idx > 0) {
+                buf[--idx] = 0;
+                sclp_print("\b \b");
+            }
+            continue;
+        case KEYCODE_ENTER:
+            disable_clock_int();
+            return idx;
+        default:
+            /* Echo input and add to buffer */
+            if (idx < len) {
+                buf[idx++] = inp[0];
+                sclp_print(inp);
+            }
+        }
+    }
+
+    disable_clock_int();
+    *buf = 0;
+
+    return 0;
+}
+
+static int get_index(void)
+{
+    char buf[11];
+    int len;
+    int i;
+
+    memset(buf, 0, sizeof(buf));
+
+    len = read_prompt(buf, sizeof(buf) - 1);
+
+    /* If no input, boot default */
+    if (len == 0) {
+        return 0;
+    }
+
+    /* Check for erroneous input */
+    for (i = 0; i < len; i++) {
+        if (!isdigit(buf[i])) {
+            return -1;
+        }
+    }
+
+    return atoui(buf);
+}
+
+static void boot_menu_prompt(bool retry)
+{
+    char tmp[11];
+
+    if (retry) {
+        sclp_print("\nError: undefined configuration"
+                   "\nPlease choose:\n");
+    } else if (timeout > 0) {
+        sclp_print("Please choose (default will boot in ");
+        sclp_print(uitoa(timeout / 1000, tmp, sizeof(tmp)));
+        sclp_print(" seconds):\n");
+    } else {
+        sclp_print("Please choose:\n");
+    }
+}
+
 static int get_boot_index(int entries)
 {
-    return 0; /* implemented next patch */
+    int boot_index;
+    bool retry = false;
+    char tmp[5];
+
+    do {
+        boot_menu_prompt(retry);
+        boot_index = get_index();
+        retry = true;
+    } while (boot_index < 0 || boot_index >= entries);
+
+    sclp_print("\nBooting entry #");
+    sclp_print(uitoa(boot_index, tmp, sizeof(tmp)));
+
+    return boot_index;
 }
 
 static void zipl_println(const char *data, size_t len)
pc-bios/s390-ccw/s390-ccw.h +2 -0
index c0dd37f..aeba8b0 100644
@@ -71,6 +71,7 @@ unsigned int get_loadparm_index(void);
 void sclp_print(const char *string);
 void sclp_setup(void);
 void sclp_get_loadparm_ascii(char *loadparm);
+int sclp_read(char *str, size_t count);
 
 /* virtio.c */
 unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,
@@ -79,6 +80,7 @@ bool virtio_is_supported(SubChannelId schid);
 void virtio_blk_setup_device(SubChannelId schid);
 int virtio_read(ulong sector, void *load_addr);
 int enable_mss_facility(void);
+u64 get_clock(void);
 ulong get_second(void);
 
 /* bootmap.c */
pc-bios/s390-ccw/sclp.c +19 -0
index e6a0898..a2f25eb 100644
@@ -119,3 +119,22 @@ void sclp_get_loadparm_ascii(char *loadparm)
         ebcdic_to_ascii((char *) sccb->loadparm, loadparm, 8);
     }
 }
+
+int sclp_read(char *str, size_t count)
+{
+    ReadEventData *sccb = (void *)_sccb;
+    char *buf = (char *)(&sccb->ebh) + 7;
+
+    /* If count exceeds max buffer size, then restrict it to the max size */
+    if (count > SCCB_SIZE - 8) {
+        count = SCCB_SIZE - 8;
+    }
+
+    sccb->h.length = SCCB_SIZE;
+    sccb->h.function_code = SCLP_UNCONDITIONAL_READ;
+
+    sclp_service_call(SCLP_CMD_READ_EVENT_DATA, sccb);
+    memcpy(str, buf, count);
+
+    return sccb->ebh.length - 7;
+}
pc-bios/s390-ccw/virtio.c +1 -1
index c890a03..817e7f5 100644
@@ -176,7 +176,7 @@ void vring_send_buf(VRing *vr, void *p, int len, int flags)
     }
 }
 
-static u64 get_clock(void)
+u64 get_clock(void)
 {
     u64 r;
 
Signature · 1 line
2.7.4
#13 lore raw

PATCH v9 11/13 s390-ccw: set cp_receive mask only when needed and consume pending service irqs

In reply to Collin L. Walling

It is possible while waiting for multiple types of external interrupts that we might have pending irqs remaining between irq consumption and irq-type disabling. Those interrupts could potentially propagate to the guest after IPL completes and cause unwanted behavior.

As it is today, the SCLP will only recognize write events that are enabled by the control program's send and receive masks. To limit the window for, and prevent further irqs from, ASCII console events (specifically keystrokes), we should only enable the control program's receive mask when we need it.

While we're at it, remove assignment of the (non control program) send and receive masks, as those are actually set by the SCLP.

---
 pc-bios/s390-ccw/menu.c     |  5 +++++
 pc-bios/s390-ccw/s390-ccw.h |  1 +
 pc-bios/s390-ccw/sclp.c     | 10 ++++------
 3 files changed, 10 insertions(+), 6 deletions(-)
pc-bios/s390-ccw/menu.c +5 -0
index b99ff03..8d55869 100644
@@ -11,6 +11,7 @@
 
 #include "libc.h"
 #include "s390-ccw.h"
+#include "sclp.h"
 
 #define KEYCODE_NO_INP '\0'
 #define KEYCODE_ESCAPE '\033'
@@ -116,8 +117,12 @@ static int get_index(void)
 
     memset(buf, 0, sizeof(buf));
 
+    sclp_set_write_mask(SCLP_EVENT_MASK_MSG_ASCII, SCLP_EVENT_MASK_MSG_ASCII);
+
     len = read_prompt(buf, sizeof(buf) - 1);
 
+    sclp_set_write_mask(0, SCLP_EVENT_MASK_MSG_ASCII);
+
     /* If no input, boot default */
     if (len == 0) {
         return 0;
pc-bios/s390-ccw/s390-ccw.h +1 -0
index aeba8b0..c4ddf9f 100644
@@ -69,6 +69,7 @@ unsigned int get_loadparm_index(void);
 
 /* sclp.c */
 void sclp_print(const char *string);
+void sclp_set_write_mask(uint32_t receive_mask, uint32_t send_mask);
 void sclp_setup(void);
 void sclp_get_loadparm_ascii(char *loadparm);
 int sclp_read(char *str, size_t count);
pc-bios/s390-ccw/sclp.c +4 -6
index a2f25eb..3836cb4 100644
@@ -46,23 +46,21 @@ static int sclp_service_call(unsigned int command, void *sccb)
         return 0;
 }
 
-static void sclp_set_write_mask(void)
+void sclp_set_write_mask(uint32_t receive_mask, uint32_t send_mask)
 {
     WriteEventMask *sccb = (void *)_sccb;
 
     sccb->h.length = sizeof(WriteEventMask);
     sccb->mask_length = sizeof(unsigned int);
-    sccb->receive_mask = SCLP_EVENT_MASK_MSG_ASCII;
-    sccb->cp_receive_mask = SCLP_EVENT_MASK_MSG_ASCII;
-    sccb->send_mask = SCLP_EVENT_MASK_MSG_ASCII;
-    sccb->cp_send_mask = SCLP_EVENT_MASK_MSG_ASCII;
+    sccb->cp_receive_mask = receive_mask;
+    sccb->cp_send_mask = send_mask;
 
     sclp_service_call(SCLP_CMD_WRITE_EVENT_MASK, sccb);
 }
 
 void sclp_setup(void)
 {
-    sclp_set_write_mask();
+    sclp_set_write_mask(0, SCLP_EVENT_MASK_MSG_ASCII);
 }
 
 long write(int fd, const void *str, size_t len)
Signature · 1 line
2.7.4
#14 lore raw

PATCH v9 12/13 s390-ccw: use zipl values when no boot menu options are present

In reply to Collin L. Walling

If no boot menu options are present, then flag the boot menu to use the zipl options that were set in the zipl configuration file (and stored on disk by zipl). These options are found at some offset prior to the start of the zipl boot menu banner. The zipl timeout value is limited to a 16-bit unsigned integer and stored as seconds, so we take care to convert it to milliseconds in order to conform to the rest of the boot menu functionality. This is limited to CCW devices.

For reference, the zipl configuration file uses the following fields in the menu section:

prompt=1 enable the boot menu
timeout=X set the timeout to X seconds

To explicitly disregard any boot menu options, then menu=off or <bootmenu enable='no' ... /> must be specified.

---
 hw/s390x/ipl.c          |  5 +++++
 hw/s390x/ipl.h          |  1 +
 pc-bios/s390-ccw/iplb.h |  1 +
 pc-bios/s390-ccw/main.c |  3 ++-
 pc-bios/s390-ccw/menu.c | 16 +++++++++++++++-
 5 files changed, 24 insertions(+), 2 deletions(-)
hw/s390x/ipl.c +5 -0
index ee2039d..c12e460 100644
@@ -241,6 +241,11 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
 
     switch (ipl->iplb.pbt) {
     case S390_IPL_TYPE_CCW:
+        /* In the absence of -boot menu, use zipl parameters */
+        if (!qemu_opt_get(opts, "menu")) {
+            *flags |= QIPL_FLAG_BM_OPTS_ZIPL;
+            return;
+        }
         break;
     default:
         error_report("boot menu is not supported for this device type.");
hw/s390x/ipl.h +1 -0
index 3a37924..1a8adc2 100644
@@ -93,6 +93,7 @@ void s390_reipl_request(void);
 
 /* Boot Menu flags */
 #define QIPL_FLAG_BM_OPTS_CMD   0x80
+#define QIPL_FLAG_BM_OPTS_ZIPL  0x40
 
 /*
  * The QEMU IPL Parameters will be stored at absolute address
pc-bios/s390-ccw/iplb.h +1 -0
index 832bb94..7dfce4f 100644
@@ -76,6 +76,7 @@ extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 
 /* Boot Menu flags */
 #define QIPL_FLAG_BM_OPTS_CMD   0x80
+#define QIPL_FLAG_BM_OPTS_ZIPL  0x40
 
 /*
  * This definition must be kept in sync with the defininition
pc-bios/s390-ccw/main.c +2 -1
index 32ed70e..a7473b0 100644
@@ -20,6 +20,7 @@ QemuIplParameters qipl;
 
 #define LOADPARM_PROMPT "PROMPT  "
 #define LOADPARM_EMPTY  "........"
+#define BOOT_MENU_FLAG_MASK (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL)
 
 /*
  * Priniciples of Operations (SA22-7832-09) chapter 17 requires that
@@ -91,7 +92,7 @@ static void menu_setup(void)
 
     switch (iplb.pbt) {
     case S390_IPL_TYPE_CCW:
-        menu_set_parms(qipl.qipl_flags & QIPL_FLAG_BM_OPTS_CMD,
+        menu_set_parms(qipl.qipl_flags & BOOT_MENU_FLAG_MASK,
                        qipl.boot_menu_timeout);
         return;
     }
pc-bios/s390-ccw/menu.c +15 -1
index 8d55869..ee56939 100644
@@ -18,6 +18,10 @@
 #define KEYCODE_BACKSP '\177'
 #define KEYCODE_ENTER  '\r'
 
+/* Offsets from zipl fields to zipl banner start */
+#define ZIPL_TIMEOUT_OFFSET 138
+#define ZIPL_FLAG_OFFSET    140
+
 #define TOD_CLOCK_MILLISECOND   0x3e8000
 
 #define LOW_CORE_EXTERNAL_INT_ADDR   0x86
@@ -187,6 +191,16 @@ int menu_get_zipl_boot_index(const char *menu_data)
 {
     size_t len;
     int entries;
+    uint16_t zipl_flag = *(uint16_t *)(menu_data - ZIPL_FLAG_OFFSET);
+    uint16_t zipl_timeout = *(uint16_t *)(menu_data - ZIPL_TIMEOUT_OFFSET);
+
+    if (flag == QIPL_FLAG_BM_OPTS_ZIPL) {
+        if (!zipl_flag) {
+            return 0; /* Boot default */
+        }
+        /* zipl stores timeout as seconds */
+        timeout = zipl_timeout * 1000;
+    }
 
     /* Print and count all menu items, including the banner */
     for (entries = 0; *menu_data; entries++) {
@@ -211,5 +225,5 @@ void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
 
 bool menu_is_enabled_zipl(void)
 {
-    return flag & QIPL_FLAG_BM_OPTS_CMD;
+    return flag & (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL);
 }
Signature · 1 line
2.7.4
#15 lore raw

PATCH v9 13/13 s390-ccw: interactive boot menu for scsi

In reply to Collin L. Walling

Interactive boot menu for scsi. This follows a similar procedure as the interactive menu for eckd dasd. An example follows:

s390x Enumerated Boot Menu.

3 entries detected. Select from index 0 to 2.

---
 hw/s390x/ipl.c              |  1 +
 pc-bios/s390-ccw/bootmap.c  |  4 ++++
 pc-bios/s390-ccw/main.c     |  1 +
 pc-bios/s390-ccw/menu.c     | 20 ++++++++++++++++++++
 pc-bios/s390-ccw/s390-ccw.h |  2 ++
 5 files changed, 28 insertions(+)
hw/s390x/ipl.c +1 -0
index c12e460..edbec90 100644
@@ -246,6 +246,7 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
             *flags |= QIPL_FLAG_BM_OPTS_ZIPL;
             return;
         }
+    case S390_IPL_TYPE_QEMU_SCSI:
         break;
     default:
         error_report("boot menu is not supported for this device type.");
pc-bios/s390-ccw/bootmap.c +4 -0
index ae93b55..29bfd8c 100644
@@ -568,6 +568,10 @@ static void ipl_scsi(void)
     debug_print_int("program table entries", program_table_entries);
     IPL_assert(program_table_entries != 0, "Empty Program Table");
 
+    if (menu_is_enabled_enum()) {
+        loadparm = menu_get_enum_boot_index(program_table_entries);
+    }
+
     debug_print_int("loadparm", loadparm);
     IPL_assert(loadparm <= MAX_TABLE_ENTRIES, "loadparm value greater than"
                " maximum number of boot entries allowed");
pc-bios/s390-ccw/main.c +1 -0
index a7473b0..9d9f8cf 100644
@@ -92,6 +92,7 @@ static void menu_setup(void)
 
     switch (iplb.pbt) {
     case S390_IPL_TYPE_CCW:
+    case S390_IPL_TYPE_QEMU_SCSI:
         menu_set_parms(qipl.qipl_flags & BOOT_MENU_FLAG_MASK,
                        qipl.boot_menu_timeout);
         return;
pc-bios/s390-ccw/menu.c +20 -0
index ee56939..96eec81 100644
@@ -217,6 +217,21 @@ int menu_get_zipl_boot_index(const char *menu_data)
     return get_boot_index(entries - 1); /* subtract 1 to exclude banner */
 }
 
+
+int menu_get_enum_boot_index(int entries)
+{
+    char tmp[4];
+
+    sclp_print("s390x Enumerated Boot Menu.\n\n");
+
+    sclp_print(uitoa(entries, tmp, sizeof(tmp)));
+    sclp_print(" entries detected. Select from boot index 0 to ");
+    sclp_print(uitoa(entries - 1, tmp, sizeof(tmp)));
+    sclp_print(".\n\n");
+
+    return get_boot_index(entries);
+}
+
 void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
 {
     flag = boot_menu_flag;
@@ -227,3 +242,8 @@ bool menu_is_enabled_zipl(void)
 {
     return flag & (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL);
 }
+
+bool menu_is_enabled_enum(void)
+{
+    return flag & QIPL_FLAG_BM_OPTS_CMD;
+}
pc-bios/s390-ccw/s390-ccw.h +2 -0
index c4ddf9f..fd18da2 100644
@@ -91,6 +91,8 @@ void zipl_load(void);
 void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout);
 int menu_get_zipl_boot_index(const char *menu_data);
 bool menu_is_enabled_zipl(void);
+int menu_get_enum_boot_index(int entries);
+bool menu_is_enabled_enum(void);
 
 static inline void fill_hex(char *out, unsigned char val)
 {
Signature · 1 line
2.7.4
#16 lore raw

Re: [Qemu-devel] [PATCH v9 13/13] s390-ccw: interactive boot menu for scsi

Quoted 22 lines · Collin L. Walling

Interactive boot menu for scsi. This follows a similar procedure as the interactive menu for eckd dasd. An example follows:

s390x Enumerated Boot Menu.

3 entries detected. Select from index 0 to 2.

---
 hw/s390x/ipl.c              |  1 +
 pc-bios/s390-ccw/bootmap.c  |  4 ++++
 pc-bios/s390-ccw/main.c     |  1 +
 pc-bios/s390-ccw/menu.c     | 20 ++++++++++++++++++++
 pc-bios/s390-ccw/s390-ccw.h |  2 ++
 5 files changed, 28 insertions(+)
hw/s390x/ipl.c +0 -0
index c12e460..edbec90 100644

hw/s390x/ipl.c static void s390_ipl_set_boot_menu(S390IPLState *ipl) · line 248

Quoted 3 lines
hw/s390x/ipl.c +0 -0
@@ -246,6 +246,7 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
             *flags |= QIPL_FLAG_BM_OPTS_ZIPL;
             return;
         }

break still missing here ...

hw/s390x/ipl.c static void s390_ipl_set_boot_menu(S390IPLState *ipl) · line 252

Quoted 4 lines
hw/s390x/ipl.c +1 -0
+    case S390_IPL_TYPE_QEMU_SCSI:
         break;
     default:
         error_report("boot menu is not supported for this device type.");

otherwise, LGTM

Signature · 2 lines
Regards,
 Viktor Mihajlovski
#17 lore raw
In reply to Collin L. Walling
Quoted 59 lines · Collin L. Walling

--- [v9] ---

- only set boot menu opts if a bootindex was specified on cmd

- Menus for guests with an IPL device that chooses to use the SCSI scheme are only enabled explicitly for -boot menu=on options (i.e. it will appropriately and cleanly ignore the zipl flag)

--- [Summary] ---

These patches implement a boot menu for ECKD DASD and SCSI guests on s390x. The menu will only appear if the disk has been configured for IPL with the zIPL tool and with the following QEMU command line options:

-boot menu=on[,splash-time=X] and/or -machine loadparm='prompt'

The following must be specified for the device to be IPL'd from:

    -device ...,bootindex=1

or via the following libvirt domain xml:

    <os>
      <bootmenu enable='yes' timeout='X'/>
    </os>

    or
    
    <disk>
      ...
      <boot order='1' loadparm='PROMPT'/>
    </disk>

Where X is some positive integer representing time in milliseconds.

<boot order='1' ... > must be specified for the device to be IPL'd from

A loadparm other than 'prompt' will disable the menu and just boot the specified entry.

If no boot options are specified, we will attempt to use the values provided by zipl (ECKD DASD only).

Collin L. Walling (13):
s390-ccw: refactor boot map table code
s390-ccw: refactor eckd_block_num to use CHS
s390-ccw: refactor IPL structs
s390-ccw: update libc
s390-ccw: move auxiliary IPL data to separate location
s390-ccw: parse and set boot menu options
s390-ccw: set up interactive boot menu parameters
s390-ccw: read stage2 boot loader data to find menu
s390-ccw: print zipl boot menu
s390-ccw: read user input for boot index via the SCLP console
s390-ccw: set cp_receive mask only when needed and consume pending
service irqs
s390-ccw: use zipl values when no boot menu options are present
s390-ccw: interactive boot menu for scsi

Quoted 17 lines
 hw/s390x/ipl.c              |  76 +++++++++++++-
 hw/s390x/ipl.h              |  31 +++++-
 pc-bios/s390-ccw/Makefile   |   2 +-
 pc-bios/s390-ccw/bootmap.c  | 184 +++++++++++++++++++++++---------
 pc-bios/s390-ccw/bootmap.h  |  91 ++++++++++------
 pc-bios/s390-ccw/iplb.h     |  24 ++++-
 pc-bios/s390-ccw/libc.c     |  88 ++++++++++++++++
 pc-bios/s390-ccw/libc.h     |  37 ++++++-
 pc-bios/s390-ccw/main.c     |  49 ++++++---
 pc-bios/s390-ccw/menu.c     | 249 ++++++++++++++++++++++++++++++++++++++++++++
 pc-bios/s390-ccw/s390-ccw.h |  10 ++
 pc-bios/s390-ccw/sclp.c     |  39 ++++---
 pc-bios/s390-ccw/virtio.c   |   2 +-
 13 files changed, 756 insertions(+), 126 deletions(-)
 create mode 100644 pc-bios/s390-ccw/libc.c
 create mode 100644 pc-bios/s390-ccw/menu.c

Series looks good to me (the break nit in 13/13 notwithstanding).

Signature · 2 lines
Regards,
 Viktor Mihajlovski