Skip to contentSkip to conversation

reset: add support for non-DT systems

PATCH Superseded Bartosz Golaszewski 3 participants 5 messages Feb 23, 2018 – Feb 28, 2018 Reset controller framework

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 reset: add support for non-DT systems

From: Bartosz Golaszewski <[email protected]>

The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode.

An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions.

We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework.

This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings.

It also provides a function allowing drivers to register lookup entries with the framework.

The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users.

Tested with a dummy reset driver with several lookup entries.

An example lookup table registration from a driver can be found below:

static struct reset_control_lookup foobar_reset_lookup[] = {
	RESET_LOOKUP("foo.0", "foo", 15),
	RESET_LOOKUP("bar.0", NULL,   5),
};

foobar_probe()
{
...

        reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
                                    ARRAY_SIZE(foobar_reset_lookup));

...
}

Cc Sekhar Nori <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc David Lechner <[email protected]>

---
v1 -> v2:
- renamed the new function to __reset_control_get_from_lookup()
- added a missing break; when a matching entry is found
- rearranged the code in __reset_control_get() - we can no longer get to the return at the bottom, so remove it and return from __reset_control_get_from_lookup() if __of_reset_control_get() fails
- return -ENOENT from reset_contol_get() if we can't find a matching entry, prevously returned -EINVAL referred to the fact that we passed a device without the of_node which is no longer an error condition
- add a comment about needing a sentinel in the lookup table

v2 -> v3:
- added the reset id number field to the lookup struct so that we don't need to rely on the array index

v3 -> v4:
- separated the driver and lookup table registration logic by adding a function meant to be called by machine-specific code that adds a lookup table to the internal list
- the correct reset controller is now found by first finding the lookup table associated with it, then finding the actual reset controller by the associated device

v4 -> v5:
- since the first user of this will be the davinci clk driver and it already registers clock lookup from within the driver code - allow drivers to register lookups with the assumption that the code can be extended to make it possible to register entries from machine code as well
- simplify the code - only expose a single lookup structure and a simply registration function
- add the RESET_LOOKUP macro for brevity

 drivers/reset/core.c             | 65 +++++++++++++++++++++++++++++++++++++++-
 include/linux/reset-controller.h | 28 +++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)
drivers/reset/core.c +64 -1
index da4292e9de97..75e54a05147a 100644
@@ -23,6 +23,9 @@
 static DEFINE_MUTEX(reset_list_mutex);
 static LIST_HEAD(reset_controller_list);
 
+static DEFINE_MUTEX(reset_lookup_mutex);
+static LIST_HEAD(reset_lookup_list);
+
 /**
  * struct reset_control - a reset control
  * @rcdev: a pointer to the reset controller device
@@ -148,6 +151,30 @@ int devm_reset_controller_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_reset_controller_register);
 
+/**
+ * reset_controller_add_lookup - register a set of lookup entries
+ * @rcdev: initialized reset controller device owning the reset line
+ * @lookup: array of reset lookup entries
+ * @num_entries: number of entries in the lookup array
+ */
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+				 struct reset_control_lookup *lookup,
+				 unsigned int num_entries)
+{
+	struct reset_control_lookup *entry;
+	unsigned int i;
+
+	mutex_lock(&reset_lookup_mutex);
+	for (i = 0; i < num_entries; i++) {
+		entry = &lookup[i];
+
+		entry->rcdev = rcdev;
+		list_add_tail(&entry->list, &reset_lookup_list);
+	}
+	mutex_unlock(&reset_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(reset_controller_add_lookup);
+
 static inline struct reset_control_array *
 rstc_to_array(struct reset_control *rstc) {
 	return container_of(rstc, struct reset_control_array, base);
@@ -493,6 +520,42 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
 }
 EXPORT_SYMBOL_GPL(__of_reset_control_get);
 
+static struct reset_control *
+__reset_control_get_from_lookup(struct device *dev, const char *con_id,
+				bool shared, bool optional)
+{
+	const struct reset_control_lookup *lookup;
+	const char *dev_id = dev_name(dev);
+	struct reset_control *rstc = NULL;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&reset_lookup_mutex);
+
+	list_for_each_entry(lookup, &reset_lookup_list, list) {
+		if (strcmp(lookup->dev_id, dev_id))
+			continue;
+
+		if ((!con_id && !lookup->con_id) ||
+		    !strcmp(con_id, lookup->con_id)) {
+			mutex_lock(&reset_list_mutex);
+			rstc = __reset_control_get_internal(lookup->rcdev,
+							    lookup->index,
+							    shared);
+			mutex_unlock(&reset_list_mutex);
+			break;
+		}
+	}
+
+	mutex_unlock(&reset_lookup_mutex);
+
+	if (!rstc)
+		return optional ? NULL : ERR_PTR(-ENOENT);
+
+	return rstc;
+}
+
 struct reset_control *__reset_control_get(struct device *dev, const char *id,
 					  int index, bool shared, bool optional)
 {
@@ -500,7 +563,7 @@ struct reset_control *__reset_control_get(struct device *dev, const char *id,
 		return __of_reset_control_get(dev->of_node, id, index, shared,
 					      optional);
 
-	return optional ? NULL : ERR_PTR(-EINVAL);
+	return __reset_control_get_from_lookup(dev, id, shared, optional);
 }
 EXPORT_SYMBOL_GPL(__reset_control_get);
 
include/linux/reset-controller.h +28 -0
index adb88f8cefbc..25698f6c1fae 100644
@@ -26,6 +26,30 @@ struct module;
 struct device_node;
 struct of_phandle_args;
 
+/**
+ * struct reset_control_lookup - represents a single lookup entry
+ *
+ * @list: internal list of all reset lookup entries
+ * @rcdev: reset controller device controlling this reset line
+ * @index: ID of the reset controller in the reset controller device
+ * @dev_id: name of the device associated with this reset line
+ * @con_id name of the reset line (can be NULL)
+ */
+struct reset_control_lookup {
+	struct list_head list;
+	struct reset_controller_dev *rcdev;
+	unsigned int index;
+	const char *dev_id;
+	const char *con_id;
+};
+
+#define RESET_LOOKUP(_dev_id, _con_id, _index)				\
+	{								\
+		.dev_id = _dev_id,					\
+		.con_id = _con_id,					\
+		.index = _index,					\
+	}
+
 /**
  * struct reset_controller_dev - reset controller entity that might
  *                               provide multiple reset controls
@@ -58,4 +82,8 @@ struct device;
 int devm_reset_controller_register(struct device *dev,
 				   struct reset_controller_dev *rcdev);
 
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+				 struct reset_control_lookup *lookup,
+				 unsigned int num_entries);
+
 #endif
Signature · 1 line
2.16.1
#1 lore raw

2018-02-23 12:39 GMT+01:00 Bartosz Golaszewski <[email protected]>:

Quoted 81 lines

From: Bartosz Golaszewski <[email protected]>

The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode.

An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions.

We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework.

This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings.

It also provides a function allowing drivers to register lookup entries with the framework.

The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users.

Tested with a dummy reset driver with several lookup entries.

An example lookup table registration from a driver can be found below:

static struct reset_control_lookup foobar_reset_lookup[] = {
        RESET_LOOKUP("foo.0", "foo", 15),
        RESET_LOOKUP("bar.0", NULL,   5),
};

foobar_probe()
{
...

        reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
                                    ARRAY_SIZE(foobar_reset_lookup));

...
}

Cc Sekhar Nori <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc David Lechner <[email protected]>

---
v1 -> v2:
- renamed the new function to __reset_control_get_from_lookup()
- added a missing break; when a matching entry is found
- rearranged the code in __reset_control_get() - we can no longer get to the return at the bottom, so remove it and return from __reset_control_get_from_lookup() if __of_reset_control_get() fails
- return -ENOENT from reset_contol_get() if we can't find a matching entry, prevously returned -EINVAL referred to the fact that we passed a device without the of_node which is no longer an error condition
- add a comment about needing a sentinel in the lookup table

v2 -> v3:
- added the reset id number field to the lookup struct so that we don't need to rely on the array index

v3 -> v4:
- separated the driver and lookup table registration logic by adding a function meant to be called by machine-specific code that adds a lookup table to the internal list
- the correct reset controller is now found by first finding the lookup table associated with it, then finding the actual reset controller by the associated device

v4 -> v5:
- since the first user of this will be the davinci clk driver and it already registers clock lookup from within the driver code - allow drivers to register lookups with the assumption that the code can be extended to make it possible to register entries from machine code as well
- simplify the code - only expose a single lookup structure and a simply registration function
- add the RESET_LOOKUP macro for brevity

Quoted 3 lines
 drivers/reset/core.c             | 65 +++++++++++++++++++++++++++++++++++++++-
 include/linux/reset-controller.h | 28 +++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)

Also: I decided not to go the phy way of allocating memory dynamically for lookup entries - I believe this is overkill and makes the code more complicated with all the error checking required.

Instead, the lookup entries structs should be provided by the caller.

Bart

maintainer
#2 lore raw
In reply to Bartosz Golaszewski

Hi Bartosz,

thank you for the update.

Quoted 71 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode.

An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions.

We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework.

This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings.

It also provides a function allowing drivers to register lookup entries with the framework.

The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users.

Tested with a dummy reset driver with several lookup entries.

An example lookup table registration from a driver can be found below:

static struct reset_control_lookup foobar_reset_lookup[] = {
	RESET_LOOKUP("foo.0", "foo", 15),
	RESET_LOOKUP("bar.0", NULL,   5),
};

foobar_probe()
{
...

        reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
                                    ARRAY_SIZE(foobar_reset_lookup));

...
}

Cc Sekhar Nori <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc David Lechner <[email protected]>

---
v1 -> v2:
- renamed the new function to __reset_control_get_from_lookup()
- added a missing break; when a matching entry is found
- rearranged the code in __reset_control_get() - we can no longer get to the return at the bottom, so remove it and return from __reset_control_get_from_lookup() if __of_reset_control_get() fails
- return -ENOENT from reset_contol_get() if we can't find a matching entry, prevously returned -EINVAL referred to the fact that we passed a device without the of_node which is no longer an error condition
- add a comment about needing a sentinel in the lookup table

v2 -> v3:
- added the reset id number field to the lookup struct so that we don't need to rely on the array index

v3 -> v4:
- separated the driver and lookup table registration logic by adding a function meant to be called by machine-specific code that adds a lookup table to the internal list
- the correct reset controller is now found by first finding the lookup table associated with it, then finding the actual reset controller by the associated device

Quoted 6 lines

v4 -> v5:
- since the first user of this will be the davinci clk driver and it already registers clock lookup from within the driver code - allow drivers to register lookups with the assumption that the code can be extended to make it possible to register entries from machine code as well

How do you imagine this may be extended? By adding an rddev_devid field to the lookup, similarly to the pwm_lookup?
I suppose reset_controller_add_lookup could then be called with a NULL rcdev to register lookups by id.

Quoted 40 lines

- simplify the code - only expose a single lookup structure and a simply registration function
- add the RESET_LOOKUP macro for brevity

 drivers/reset/core.c             | 65 +++++++++++++++++++++++++++++++++++++++-
 include/linux/reset-controller.h | 28 +++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)
drivers/reset/core.c +17 -0
index da4292e9de97..75e54a05147a 100644
@@ -23,6 +23,9 @@
 static DEFINE_MUTEX(reset_list_mutex);
 static LIST_HEAD(reset_controller_list);
 
+static DEFINE_MUTEX(reset_lookup_mutex);
+static LIST_HEAD(reset_lookup_list);
+
 /**
  * struct reset_control - a reset control
  * @rcdev: a pointer to the reset controller device
@@ -148,6 +151,30 @@ int devm_reset_controller_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_reset_controller_register);
 
+/**
+ * reset_controller_add_lookup - register a set of lookup entries
+ * @rcdev: initialized reset controller device owning the reset line
+ * @lookup: array of reset lookup entries
+ * @num_entries: number of entries in the lookup array
+ */
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+				 struct reset_control_lookup *lookup,
+				 unsigned int num_entries)
+{
+	struct reset_control_lookup *entry;
+	unsigned int i;
+
+	mutex_lock(&reset_lookup_mutex);

drivers/reset/core.c int devm_reset_controller_register(struct device *dev, · line 177

Quoted 10 lines
drivers/reset/core.c +10 -0
+	for (i = 0; i < num_entries; i++) {
+		entry = &lookup[i];
+
+		entry->rcdev = rcdev;
+		list_add_tail(&entry->list, &reset_lookup_list);
+	}
+	mutex_unlock(&reset_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(reset_controller_add_lookup);
+

What about reset_controller_remove_lookup?

Quoted 12 lines
drivers/reset/core.c +5 -0
 static inline struct reset_control_array *
 rstc_to_array(struct reset_control *rstc) {
 	return container_of(rstc, struct reset_control_array, base);
@@ -493,6 +520,42 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
 }
 EXPORT_SYMBOL_GPL(__of_reset_control_get);
 
+static struct reset_control *
+__reset_control_get_from_lookup(struct device *dev, const char *con_id,
+				bool shared, bool optional)
+{
+	const struct reset_control_lookup *lookup;

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 537

Quoted 10 lines
drivers/reset/core.c +10 -0
+	const char *dev_id = dev_name(dev);
+	struct reset_control *rstc = NULL;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&reset_lookup_mutex);
+
+	list_for_each_entry(lookup, &reset_lookup_list, list) {
+		if (strcmp(lookup->dev_id, dev_id))

This will crash if (lookup->dev_id == NULL).

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 541

Quoted 4 lines
drivers/reset/core.c +4 -0
+			continue;
+
+		if ((!con_id && !lookup->con_id) ||
+		    !strcmp(con_id, lookup->con_id)) {

This will crash if only one of con_id or lookup->con_id is NULL.

Call strcmp only if both strings are valid.

Quoted 65 lines
drivers/reset/core.c +18 -1
+			mutex_lock(&reset_list_mutex);
+			rstc = __reset_control_get_internal(lookup->rcdev,
+							    lookup->index,
+							    shared);
+			mutex_unlock(&reset_list_mutex);
+			break;
+		}
+	}
+
+	mutex_unlock(&reset_lookup_mutex);
+
+	if (!rstc)
+		return optional ? NULL : ERR_PTR(-ENOENT);
+
+	return rstc;
+}
+
 struct reset_control *__reset_control_get(struct device *dev, const char *id,
 					  int index, bool shared, bool optional)
 {
@@ -500,7 +563,7 @@ struct reset_control *__reset_control_get(struct device *dev, const char *id,
 		return __of_reset_control_get(dev->of_node, id, index, shared,
 					      optional);
 
-	return optional ? NULL : ERR_PTR(-EINVAL);
+	return __reset_control_get_from_lookup(dev, id, shared, optional);
 }
 EXPORT_SYMBOL_GPL(__reset_control_get);
 
include/linux/reset-controller.h +24 -0
index adb88f8cefbc..25698f6c1fae 100644
@@ -26,6 +26,30 @@ struct module;
 struct device_node;
 struct of_phandle_args;
 
+/**
+ * struct reset_control_lookup - represents a single lookup entry
+ *
+ * @list: internal list of all reset lookup entries
+ * @rcdev: reset controller device controlling this reset line
+ * @index: ID of the reset controller in the reset controller device
+ * @dev_id: name of the device associated with this reset line
+ * @con_id name of the reset line (can be NULL)
+ */
+struct reset_control_lookup {
+	struct list_head list;
+	struct reset_controller_dev *rcdev;
+	unsigned int index;
+	const char *dev_id;
+	const char *con_id;
+};
+
+#define RESET_LOOKUP(_dev_id, _con_id, _index)				\
+	{								\
+		.dev_id = _dev_id,					\
+		.con_id = _con_id,					\
+		.index = _index,					\
+	}
+
 /**
  * struct reset_controller_dev - reset controller entity that might
  *                               provide multiple reset controls

include/linux/reset-controller.h struct device; · line 89

Quoted 8 lines
include/linux/reset-controller.h +4 -0
@@ -58,4 +82,8 @@ struct device;
 int devm_reset_controller_register(struct device *dev,
 				   struct reset_controller_dev *rcdev);
 
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+				 struct reset_control_lookup *lookup,
+				 unsigned int num_entries);
+
 #endif

regards
Philipp

#3 lore raw

2018-02-27 17:10 GMT+01:00 Philipp Zabel <[email protected]>:

Quoted 83 lines

Hi Bartosz,

thank you for the update.

Quoted 71 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode.

An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions.

We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework.

This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings.

It also provides a function allowing drivers to register lookup entries with the framework.

The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users.

Tested with a dummy reset driver with several lookup entries.

An example lookup table registration from a driver can be found below:

static struct reset_control_lookup foobar_reset_lookup[] = {
      RESET_LOOKUP("foo.0", "foo", 15),
      RESET_LOOKUP("bar.0", NULL,   5),
};

foobar_probe()
{
...

        reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
                                    ARRAY_SIZE(foobar_reset_lookup));

...
}

Cc Sekhar Nori <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc David Lechner <[email protected]>

---
v1 -> v2:
- renamed the new function to __reset_control_get_from_lookup()
- added a missing break; when a matching entry is found
- rearranged the code in __reset_control_get() - we can no longer get to the return at the bottom, so remove it and return from __reset_control_get_from_lookup() if __of_reset_control_get() fails
- return -ENOENT from reset_contol_get() if we can't find a matching entry, prevously returned -EINVAL referred to the fact that we passed a device without the of_node which is no longer an error condition
- add a comment about needing a sentinel in the lookup table

v2 -> v3:
- added the reset id number field to the lookup struct so that we don't need to rely on the array index

v3 -> v4:
- separated the driver and lookup table registration logic by adding a function meant to be called by machine-specific code that adds a lookup table to the internal list
- the correct reset controller is now found by first finding the lookup table associated with it, then finding the actual reset controller by the associated device

Quoted 6 lines

v4 -> v5:
- since the first user of this will be the davinci clk driver and it already registers clock lookup from within the driver code - allow drivers to register lookups with the assumption that the code can be extended to make it possible to register entries from machine code as well

Quoted 5 lines

How do you imagine this may be extended? By adding an rddev_devid field to the lookup, similarly to the pwm_lookup?
I suppose reset_controller_add_lookup could then be called with a NULL rcdev to register lookups by id.

Yes, this is what I was thinking about more or less.

Quoted 44 lines
Quoted 44 lines

- simplify the code - only expose a single lookup structure and a simply registration function
- add the RESET_LOOKUP macro for brevity

 drivers/reset/core.c             | 65 +++++++++++++++++++++++++++++++++++++++-
 include/linux/reset-controller.h | 28 +++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)
drivers/reset/core.c +21 -0
index da4292e9de97..75e54a05147a 100644
@@ -23,6 +23,9 @@
 static DEFINE_MUTEX(reset_list_mutex);
 static LIST_HEAD(reset_controller_list);
 
+static DEFINE_MUTEX(reset_lookup_mutex);
+static LIST_HEAD(reset_lookup_list);
+
 /**
  * struct reset_control - a reset control
  * @rcdev: a pointer to the reset controller device
@@ -148,6 +151,30 @@ int devm_reset_controller_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_reset_controller_register);
 
+/**
+ * reset_controller_add_lookup - register a set of lookup entries
+ * @rcdev: initialized reset controller device owning the reset line
+ * @lookup: array of reset lookup entries
+ * @num_entries: number of entries in the lookup array
+ */
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+                              struct reset_control_lookup *lookup,
+                              unsigned int num_entries)
+{
+     struct reset_control_lookup *entry;
+     unsigned int i;
+
+     mutex_lock(&reset_lookup_mutex);
+     for (i = 0; i < num_entries; i++) {
+             entry = &lookup[i];
+
+             entry->rcdev = rcdev;
Quoted 8 lines

drivers/reset/core.c int devm_reset_controller_register(struct device *dev, · line 177

Quoted 6 lines
drivers/reset/core.c +6 -0
+             list_add_tail(&entry->list, &reset_lookup_list);
+     }
+     mutex_unlock(&reset_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(reset_controller_add_lookup);
+

What about reset_controller_remove_lookup?

While I understand that we have those for phy or gpio, I don't really think they're that useful. Not many users do it anyway. Can we add it once it's actually needed?

Quoted 17 lines
Quoted 17 lines
drivers/reset/core.c +9 -0
 static inline struct reset_control_array *
 rstc_to_array(struct reset_control *rstc) {
      return container_of(rstc, struct reset_control_array, base);
@@ -493,6 +520,42 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
 }
 EXPORT_SYMBOL_GPL(__of_reset_control_get);
 
+static struct reset_control *
+__reset_control_get_from_lookup(struct device *dev, const char *con_id,
+                             bool shared, bool optional)
+{
+     const struct reset_control_lookup *lookup;
+     const char *dev_id = dev_name(dev);
+     struct reset_control *rstc = NULL;
+
+     if (!dev)
Quoted 9 lines

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 537

Quoted 6 lines
drivers/reset/core.c +6 -0
+             return ERR_PTR(-EINVAL);
+
+     mutex_lock(&reset_lookup_mutex);
+
+     list_for_each_entry(lookup, &reset_lookup_list, list) {
+             if (strcmp(lookup->dev_id, dev_id))

This will crash if (lookup->dev_id == NULL).

We're stating explicitly that dev_id is required in the kernel doc but if you insist, I can add a check for that.

Quoted 9 lines

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 541

Quoted 4 lines
drivers/reset/core.c +4 -0
+                     continue;
+
+             if ((!con_id && !lookup->con_id) ||
+                 !strcmp(con_id, lookup->con_id)) {

This will crash if only one of con_id or lookup->con_id is NULL.

Call strcmp only if both strings are valid.

Indeed, will fix it.

Quoted 68 lines
Quoted 68 lines
drivers/reset/core.c +18 -1
+                     mutex_lock(&reset_list_mutex);
+                     rstc = __reset_control_get_internal(lookup->rcdev,
+                                                         lookup->index,
+                                                         shared);
+                     mutex_unlock(&reset_list_mutex);
+                     break;
+             }
+     }
+
+     mutex_unlock(&reset_lookup_mutex);
+
+     if (!rstc)
+             return optional ? NULL : ERR_PTR(-ENOENT);
+
+     return rstc;
+}
+
 struct reset_control *__reset_control_get(struct device *dev, const char *id,
                                        int index, bool shared, bool optional)
 {
@@ -500,7 +563,7 @@ struct reset_control *__reset_control_get(struct device *dev, const char *id,
              return __of_reset_control_get(dev->of_node, id, index, shared,
                                            optional);
 
-     return optional ? NULL : ERR_PTR(-EINVAL);
+     return __reset_control_get_from_lookup(dev, id, shared, optional);
 }
 EXPORT_SYMBOL_GPL(__reset_control_get);
 
include/linux/reset-controller.h +24 -0
index adb88f8cefbc..25698f6c1fae 100644
@@ -26,6 +26,30 @@ struct module;
 struct device_node;
 struct of_phandle_args;
 
+/**
+ * struct reset_control_lookup - represents a single lookup entry
+ *
+ * @list: internal list of all reset lookup entries
+ * @rcdev: reset controller device controlling this reset line
+ * @index: ID of the reset controller in the reset controller device
+ * @dev_id: name of the device associated with this reset line
+ * @con_id name of the reset line (can be NULL)
+ */
+struct reset_control_lookup {
+     struct list_head list;
+     struct reset_controller_dev *rcdev;
+     unsigned int index;
+     const char *dev_id;
+     const char *con_id;
+};
+
+#define RESET_LOOKUP(_dev_id, _con_id, _index)                               \
+     {                                                               \
+             .dev_id = _dev_id,                                      \
+             .con_id = _con_id,                                      \
+             .index = _index,                                        \
+     }
+
 /**
  * struct reset_controller_dev - reset controller entity that might
  *                               provide multiple reset controls
@@ -58,4 +82,8 @@ struct device;
 int devm_reset_controller_register(struct device *dev,
                                 struct reset_controller_dev *rcdev);
 
Quoted 8 lines

include/linux/reset-controller.h struct device; · line 89

Quoted 5 lines
include/linux/reset-controller.h +4 -0
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+                              struct reset_control_lookup *lookup,
+                              unsigned int num_entries);
+
 #endif

regards
Philipp

Thanks,
Bart

maintainer
#4 lore raw
Quoted 84 lines · Bartosz Golaszewski

2018-02-27 17:10 GMT+01:00 Philipp Zabel <[email protected]>:

Quoted 83 lines

Hi Bartosz,

thank you for the update.

Quoted 77 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode.

An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions.

We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework.

This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings.

It also provides a function allowing drivers to register lookup entries with the framework.

The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users.

Tested with a dummy reset driver with several lookup entries.

An example lookup table registration from a driver can be found below:

static struct reset_control_lookup foobar_reset_lookup[] = {
      RESET_LOOKUP("foo.0", "foo", 15),
      RESET_LOOKUP("bar.0", NULL,   5),
};

foobar_probe()
{
...

        reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
                                    ARRAY_SIZE(foobar_reset_lookup));

...
}

Cc Sekhar Nori <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc David Lechner <[email protected]>

---
v1 -> v2:
- renamed the new function to __reset_control_get_from_lookup()
- added a missing break; when a matching entry is found
- rearranged the code in __reset_control_get() - we can no longer get to the return at the bottom, so remove it and return from __reset_control_get_from_lookup() if __of_reset_control_get() fails
- return -ENOENT from reset_contol_get() if we can't find a matching entry, prevously returned -EINVAL referred to the fact that we passed a device without the of_node which is no longer an error condition
- add a comment about needing a sentinel in the lookup table

v2 -> v3:
- added the reset id number field to the lookup struct so that we don't need to rely on the array index

v3 -> v4:
- separated the driver and lookup table registration logic by adding a function meant to be called by machine-specific code that adds a lookup table to the internal list
- the correct reset controller is now found by first finding the lookup table associated with it, then finding the actual reset controller by the associated device

v4 -> v5:
- since the first user of this will be the davinci clk driver and it already registers clock lookup from within the driver code - allow drivers to register lookups with the assumption that the code can be extended to make it possible to register entries from machine code as well

Quoted 7 lines
Quoted 5 lines

How do you imagine this may be extended? By adding an rddev_devid field to the lookup, similarly to the pwm_lookup?
I suppose reset_controller_add_lookup could then be called with a NULL rcdev to register lookups by id.

Yes, this is what I was thinking about more or less.

Ok. I just want to avoid having to change all users when somebody needs that functionality, even though hopefully there won't be that many.

Quoted 53 lines
Quoted 44 lines
Quoted 44 lines

- simplify the code - only expose a single lookup structure and a simply registration function
- add the RESET_LOOKUP macro for brevity

 drivers/reset/core.c             | 65 +++++++++++++++++++++++++++++++++++++++-
 include/linux/reset-controller.h | 28 +++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)
drivers/reset/core.c +21 -0
index da4292e9de97..75e54a05147a 100644
@@ -23,6 +23,9 @@
 static DEFINE_MUTEX(reset_list_mutex);
 static LIST_HEAD(reset_controller_list);
 
+static DEFINE_MUTEX(reset_lookup_mutex);
+static LIST_HEAD(reset_lookup_list);
+
 /**
  * struct reset_control - a reset control
  * @rcdev: a pointer to the reset controller device
@@ -148,6 +151,30 @@ int devm_reset_controller_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_reset_controller_register);
 
+/**
+ * reset_controller_add_lookup - register a set of lookup entries
+ * @rcdev: initialized reset controller device owning the reset line
+ * @lookup: array of reset lookup entries
+ * @num_entries: number of entries in the lookup array
+ */
+void reset_controller_add_lookup(struct reset_controller_dev *rcdev,
+                              struct reset_control_lookup *lookup,
+                              unsigned int num_entries)
+{
+     struct reset_control_lookup *entry;
+     unsigned int i;
+
+     mutex_lock(&reset_lookup_mutex);
+     for (i = 0; i < num_entries; i++) {
+             entry = &lookup[i];
+
+             entry->rcdev = rcdev;
Quoted 8 lines

drivers/reset/core.c int devm_reset_controller_register(struct device *dev, · line 177

Quoted 6 lines
drivers/reset/core.c +6 -0
+             list_add_tail(&entry->list, &reset_lookup_list);
+     }
+     mutex_unlock(&reset_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(reset_controller_add_lookup);
+

What about reset_controller_remove_lookup?

Quoted 3 lines

While I understand that we have those for phy or gpio, I don't really think they're that useful. Not many users do it anyway. Can we add it once it's actually needed?

Agreed.

Quoted 27 lines
Quoted 17 lines
Quoted 17 lines
drivers/reset/core.c +9 -0
 static inline struct reset_control_array *
 rstc_to_array(struct reset_control *rstc) {
      return container_of(rstc, struct reset_control_array, base);
@@ -493,6 +520,42 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
 }
 EXPORT_SYMBOL_GPL(__of_reset_control_get);
 
+static struct reset_control *
+__reset_control_get_from_lookup(struct device *dev, const char *con_id,
+                             bool shared, bool optional)
+{
+     const struct reset_control_lookup *lookup;
+     const char *dev_id = dev_name(dev);
+     struct reset_control *rstc = NULL;
+
+     if (!dev)
Quoted 9 lines

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 537

Quoted 6 lines
drivers/reset/core.c +6 -0
+             return ERR_PTR(-EINVAL);
+
+     mutex_lock(&reset_lookup_mutex);
+
+     list_for_each_entry(lookup, &reset_lookup_list, list) {
+             if (strcmp(lookup->dev_id, dev_id))

This will crash if (lookup->dev_id == NULL).

Quoted 2 lines

We're stating explicitly that dev_id is required in the kernel doc but if you insist, I can add a check for that.

This isn't such a hot path that we couldn't afford the NULL pointer check, but given that it is documented as required, maybe better let reset_controller_add_lookup check for it and never add malformed lookups to the list in the first place.

Quoted 11 lines
Quoted 9 lines

drivers/reset/core.c struct reset_control *__of_reset_control_get(struct device_node *node, · line 541

Quoted 4 lines
drivers/reset/core.c +4 -0
+                     continue;
+
+             if ((!con_id && !lookup->con_id) ||
+                 !strcmp(con_id, lookup->con_id)) {

This will crash if only one of con_id or lookup->con_id is NULL.

Call strcmp only if both strings are valid.

Indeed, will fix it.

regards
Philipp