remove unused patches
cover remove unused patches
Some patches are unused and some were not removed during the cleanup process. Detected using this silly python script:
import os
import subprocess
patches = subprocess.check_output(("git", "ls-files", "*.patch","*.diff")).decode("utf-8").split() for patch in patches:
patchname=os.path.basename(patch)
result = subprocess.check_output(("git", "grep", patchname)).decode("utf-8").splitlines()
print(result)Maxin B. John (5):
nautilus: remove unused patches
breakpad: remove unused patch
flite: remove leftover patch
libeigen: remove unused patch
gst-ffmpeg: remove leftover patch
.../nautilus/nautilus/no-try-run-strftime.diff | 28 - .../nautilus/nautilus3/no-try-run-strftime.diff | 41 - .../gst-ffmpeg-0.10.13/lower-rank.diff | 16 - ...-Import-necessary-definitions-from-stab.h.patch | 199 - .../flite-alsa-1.3/flite-1.3-alsa_support-1.2.diff | 6615 -------------------- ...Lists.txt-install-FindEigen3.cmake-script.patch | 28 - 6 files changed, 6927 deletions(-) delete mode 100644 meta-gnome/recipes-gnome/nautilus/nautilus/no-try-run-strftime.diff delete mode 100644 meta-gnome/recipes-gnome/nautilus/nautilus3/no-try-run-strftime.diff delete mode 100644 meta-multimedia/recipes-multimedia/gstreamer-0.10/gst-ffmpeg-0.10.13/lower-rank.diff delete mode 100644 meta-oe/recipes-devtools/breakpad/breakpad/0005-Import-necessary-definitions-from-stab.h.patch delete mode 100644 meta-oe/recipes-support/flite/flite-alsa-1.3/flite-1.3-alsa_support-1.2.diff delete mode 100644 meta-oe/recipes-support/libeigen/libeigen/0001-CMakeLists.txt-install-FindEigen3.cmake-script.patch
Signature · 1 line
2.4.0
PATCH 1/5 nautilus: remove unused patches
remove the following unused patch from nautilus and nautilus3:
no-try-run-strftime.diff
--- .../nautilus/nautilus/no-try-run-strftime.diff | 28 --------------- .../nautilus/nautilus3/no-try-run-strftime.diff | 41 ---------------------- 2 files changed, 69 deletions(-) delete mode 100644 meta-gnome/recipes-gnome/nautilus/nautilus/no-try-run-strftime.diff delete mode 100644 meta-gnome/recipes-gnome/nautilus/nautilus3/no-try-run-strftime.diff
meta-gnome/recipes-gnome/nautilus/nautilus/no-try-run-strftime.diff deleted +0 -28
@@ -1,28 +0,0 @@ ---- /tmp/configure.in 2009-04-13 11:26:43.000000000 +0200 -+++ nautilus-2.26.1/configure.in 2009-04-13 11:28:37.000000000 +0200 -@@ -375,25 +375,6 @@ - - dnl =========================================================================== - --dnl strftime checks -- --AC_TRY_RUN([#include <time.h> -- int main () -- { -- char buf[100]; -- struct tm tm = {0}; -- tm.tm_year = 99; -- if (strftime(buf, 100, "%EY", &tm) == 4 && -- strcmp (buf, "1999")==0) -- return 0; -- return 1; -- } -- ], -- AC_DEFINE(HAVE_STRFTIME_EXTENSION, 1, [Define if strftime supports %E and %O modifiers.]) -- ) -- --dnl =========================================================================== -- - # - # Checks for Xft/XRender - #
meta-gnome/recipes-gnome/nautilus/nautilus3/no-try-run-strftime.diff deleted +0 -41
41 lines not on this page · raw message
Signature · 1 line
2.4.0
PATCH 2/5 breakpad: remove unused patch
In reply to Maxin B. JohnRemove the following unused patch:
0005-Import-necessary-definitions-from-stab.h.patch
--- ...-Import-necessary-definitions-from-stab.h.patch | 199 --------------------- 1 file changed, 199 deletions(-) delete mode 100644 meta-oe/recipes-devtools/breakpad/breakpad/0005-Import-necessary-definitions-from-stab.h.patch
meta-oe/recipes-devtools/breakpad/breakpad/0005-Import-necessary-definitions-from-stab.h.patch deleted +0 -199
@@ -1,199 +0,0 @@ -From fa7a3b7312307acad0045549d5f306e7fd117804 Mon Sep 17 00:00:00 2001 -From: Felix Janda <[email protected]> -Date: Sun, 1 Feb 2015 14:34:44 +0100 -Subject: [PATCH 5/6] Import necessary definitions from stab.h - ---- - configure.ac | 1 - - src/common/android/include/stab.h | 100 ------------------------------------ - src/common/common.gyp | 1 - - src/common/stabs_reader.cc | 1 - - src/common/stabs_reader.h | 13 +++-- - src/common/stabs_reader_unittest.cc | 1 - - 6 files changed, 10 insertions(+), 107 deletions(-) - delete mode 100644 src/common/android/include/stab.h - -diff --git a/configure.ac b/configure.ac -index 2223920..0e55cd9 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -73,7 +73,6 @@ AC_HEADER_STDC - AC_SYS_LARGEFILE - m4_include(m4/ax_pthread.m4) - AX_PTHREAD --AC_CHECK_HEADERS([a.out.h]) - - # Only build Linux client libs when compiling for Linux - case $host in -diff --git a/src/common/android/include/stab.h b/src/common/android/include/stab.h -deleted file mode 100644 -index cd92902..0000000 ---- a/src/common/android/include/stab.h -+++ /dev/null -@@ -1,100 +0,0 @@ --// Copyright (c) 2012, Google Inc. --// All rights reserved. --// --// Redistribution and use in source and binary forms, with or without --// modification, are permitted provided that the following conditions are --// met: --// --// * Redistributions of source code must retain the above copyright --// notice, this list of conditions and the following disclaimer. --// * Redistributions in binary form must reproduce the above --// copyright notice, this list of conditions and the following disclaimer --// in the documentation and/or other materials provided with the --// distribution. --// * Neither the name of Google Inc. nor the names of its --// contributors may be used to endorse or promote products derived from --// this software without specific prior written permission. --// --// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS --// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT --// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR --// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT --// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, --// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT --// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, --// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY --// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT --// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE --// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- --#ifndef GOOGLE_BREAKPAD_COMMON_ANDROID_INCLUDE_STAB_H --#define GOOGLE_BREAKPAD_COMMON_ANDROID_INCLUDE_STAB_H -- --#include <sys/cdefs.h> -- --#ifdef __BIONIC_HAVE_STAB_H --#include <stab.h> --#else -- --#ifdef __cplusplus --extern "C" { --#endif // __cplusplus -- --#define _STAB_CODE_LIST \ -- _STAB_CODE_DEF(UNDF,0x00) \ -- _STAB_CODE_DEF(GSYM,0x20) \ -- _STAB_CODE_DEF(FNAME,0x22) \ -- _STAB_CODE_DEF(FUN,0x24) \ -- _STAB_CODE_DEF(STSYM,0x26) \ -- _STAB_CODE_DEF(LCSYM,0x28) \ -- _STAB_CODE_DEF(MAIN,0x2a) \ -- _STAB_CODE_DEF(PC,0x30) \ -- _STAB_CODE_DEF(NSYMS,0x32) \ -- _STAB_CODE_DEF(NOMAP,0x34) \ -- _STAB_CODE_DEF(OBJ,0x38) \ -- _STAB_CODE_DEF(OPT,0x3c) \ -- _STAB_CODE_DEF(RSYM,0x40) \ -- _STAB_CODE_DEF(M2C,0x42) \ -- _STAB_CODE_DEF(SLINE,0x44) \ -- _STAB_CODE_DEF(DSLINE,0x46) \ -- _STAB_CODE_DEF(BSLINE,0x48) \ -- _STAB_CODE_DEF(BROWS,0x48) \ -- _STAB_CODE_DEF(DEFD,0x4a) \ -- _STAB_CODE_DEF(EHDECL,0x50) \ -- _STAB_CODE_DEF(MOD2,0x50) \ -- _STAB_CODE_DEF(CATCH,0x54) \ -- _STAB_CODE_DEF(SSYM,0x60) \ -- _STAB_CODE_DEF(SO,0x64) \ -- _STAB_CODE_DEF(LSYM,0x80) \ -- _STAB_CODE_DEF(BINCL,0x82) \ -- _STAB_CODE_DEF(SOL,0x84) \ -- _STAB_CODE_DEF(PSYM,0xa0) \ -- _STAB_CODE_DEF(EINCL,0xa2) \ -- _STAB_CODE_DEF(ENTRY,0xa4) \ -- _STAB_CODE_DEF(LBRAC,0xc0) \ -- _STAB_CODE_DEF(EXCL,0xc2) \ -- _STAB_CODE_DEF(SCOPE,0xc4) \ -- _STAB_CODE_DEF(RBRAC,0xe0) \ -- _STAB_CODE_DEF(BCOMM,0xe2) \ -- _STAB_CODE_DEF(ECOMM,0xe4) \ -- _STAB_CODE_DEF(ECOML,0xe8) \ -- _STAB_CODE_DEF(NBTEXT,0xf0) \ -- _STAB_CODE_DEF(NBDATA,0xf2) \ -- _STAB_CODE_DEF(NBBSS,0xf4) \ -- _STAB_CODE_DEF(NBSTS,0xf6) \ -- _STAB_CODE_DEF(NBLCS,0xf8) \ -- _STAB_CODE_DEF(LENG,0xfe) -- --enum __stab_debug_code { --#define _STAB_CODE_DEF(x,y) N_##x = y, --_STAB_CODE_LIST --#undef _STAB_CODE_DEF --}; -- --#ifdef __cplusplus --} // extern "C" --#endif // __cplusplus -- --#endif // __BIONIC_HAVE_STAB_H -- --#endif // GOOGLE_BREAKPAD_COMMON_ANDROID_INCLUDE_STAB_H -diff --git a/src/common/common.gyp b/src/common/common.gyp -index f01ede5..c49ff85 100644 ---- a/src/common/common.gyp -+++ b/src/common/common.gyp -@@ -46,7 +46,6 @@ - 'android/include/elf.h', - 'android/include/link.h', - 'android/include/sgidefs.h', -- 'android/include/stab.h', - 'android/include/sys/procfs.h', - 'android/include/sys/signal.h', - 'android/include/sys/user.h', -diff --git a/src/common/stabs_reader.cc b/src/common/stabs_reader.cc -index 6019fc7..9562caa 100644 ---- a/src/common/stabs_reader.cc -+++ b/src/common/stabs_reader.cc -@@ -34,7 +34,6 @@ - #include "common/stabs_reader.h" - - #include <assert.h> --#include <stab.h> - #include <string.h> - - #include <string> -diff --git a/src/common/stabs_reader.h b/src/common/stabs_reader.h -index d89afc0..591f007 100644 ---- a/src/common/stabs_reader.h -+++ b/src/common/stabs_reader.h -@@ -53,12 +53,19 @@ - #include <config.h> - #endif - --#ifdef HAVE_A_OUT_H --#include <a.out.h> --#endif - #ifdef HAVE_MACH_O_NLIST_H - #include <mach-o/nlist.h> - #endif -+// Definitions from <stab.h> and <a.out.h> for systems which -+// do not have them -+#undef N_UNDF -+#define N_UNDF 0x0 -+#define N_FUN 0x24 -+#define N_SLINE 0x44 -+#define N_SO 0x64 -+#define N_LSYM 0x80 -+#define N_BINCL 0x82 -+#define N_SOL 0x84 - - #include <string> - #include <vector> -diff --git a/src/common/stabs_reader_unittest.cc b/src/common/stabs_reader_unittest.cc -index a84da1c..854ac42 100644 ---- a/src/common/stabs_reader_unittest.cc -+++ b/src/common/stabs_reader_unittest.cc -@@ -33,7 +33,6 @@ - - #include <assert.h> - #include <errno.h> --#include <stab.h> - #include <stdarg.h> - #include <stdlib.h> - #include <string.h> --- -2.0.5 -
Signature · 1 line
2.4.0
PATCH 3/5 flite: remove leftover patch
In reply to Maxin B. JohnRemove left-over patch from flite package which was removed earlier:
flite-1.3-alsa_support-1.2.diff
--- .../flite-alsa-1.3/flite-1.3-alsa_support-1.2.diff | 6615 -------------------- 1 file changed, 6615 deletions(-) delete mode 100644 meta-oe/recipes-support/flite/flite-alsa-1.3/flite-1.3-alsa_support-1.2.diff
meta-oe/recipes-support/flite/flite-alsa-1.3/flite-1.3-alsa_support-1.2.diff deleted +0 -6615
@@ -1,6615 +0,0 @@ -Index: lang/usenglish/Makefile -=================================================================== ---- flite-1.3-release/lang/usenglish/Makefile (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/lang/usenglish/Makefile (.../release-1.2) (revision 7) -@@ -38,6 +38,7 @@ - DIRNAME=lang/usenglish - BUILD_DIRS = - ALL_DIRS= -+include $(TOP)/config/config - H = usenglish.h us_int_accent_cart.h us_int_tone_cart.h us_durz_cart.h \ - us_ffeatures.h us_phrasing_cart.h us_text.h us_f0.h us_nums_cart.h - SRCS = us_int_accent_cart.c us_int_tone_cart.c us_f0_model.c \ -@@ -45,7 +46,11 @@ - us_phoneset.c us_ffeatures.c us_phrasing_cart.c \ - us_gpos.c us_text.c us_expand.c us_postlex.c \ - us_nums_cart.c us_aswd.c usenglish.c --OBJS = $(SRCS:.c=.o) -+ifdef SHFLAGS -+OBJS := $(SRCS:.c=.os) -+else -+OBJS := $(SRCS:.c=.o) -+endif - SCM= - FILES = Makefile $(SCM) $(SRCS) $(H) - LIBNAME = flite_usenglish -Index: lang/cmu_us_kal/Makefile -=================================================================== ---- flite-1.3-release/lang/cmu_us_kal/Makefile (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/lang/cmu_us_kal/Makefile (.../release-1.2) (revision 7) -@@ -43,7 +43,12 @@ - cmu_us_kal_lpc.c \ - cmu_us_kal_res.c \ - cmu_us_kal_residx.c --OBJS = $(SRCS:.c=.o) -+include $(TOP)/config/config -+ifdef SHFLAGS -+OBJS := $(SRCS:.c=.os) -+else -+OBJS := $(SRCS:.c=.o) -+endif - SCM= - FILES = Makefile $(SCM) $(SRCS) $(H) - LIBNAME = flite_cmu_us_kal -Index: lang/cmu_us_kal16/Makefile -=================================================================== ---- flite-1.3-release/lang/cmu_us_kal16/Makefile (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/lang/cmu_us_kal16/Makefile (.../release-1.2) (revision 7) -@@ -44,7 +44,12 @@ - cmu_us_kal16_lpc.c \ - cmu_us_kal16_res.c \ - cmu_us_kal16_residx.c --OBJS = $(SRCS:.c=.o) -+include $(TOP)/config/config -+ifdef SHFLAGS -+OBJS := $(SRCS:.c=.os) -+else -+OBJS := $(SRCS:.c=.o) -+endif - SCM= - FILES = Makefile $(SCM) $(SRCS) $(H) - LIBNAME = flite_cmu_us_kal16 -Index: lang/cmu_time_awb/Makefile -=================================================================== ---- flite-1.3-release/lang/cmu_time_awb/Makefile (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/lang/cmu_time_awb/Makefile (.../release-1.2) (revision 7) -@@ -45,7 +45,12 @@ - cmu_time_awb_mcep.c \ - cmu_time_awb_lpc.c \ - cmu_time_awb_lex_entry.c --OBJS = $(SRCS:.c=.o) -+include $(TOP)/config/config -+ifdef SHFLAGS -+OBJS := $(SRCS:.c=.os) -+else -+OBJS := $(SRCS:.c=.o) -+endif - SCM= - FILES = Makefile $(SCM) $(SRCS) $(H) - LIBNAME = flite_cmu_time_awb -Index: lang/cmulex/Makefile -=================================================================== ---- flite-1.3-release/lang/cmulex/Makefile (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/lang/cmulex/Makefile (.../release-1.2) (revision 7) -@@ -38,13 +38,20 @@ - DIRNAME=lang/cmulex - BUILD_DIRS = - ALL_DIRS= -+ - H = cmu_lts_model.h cmulex.h - SRCS = cmu_lts_rules.c cmu_lts_model.c \ - cmu_lex.c cmu_lex_entries.c cmu_lex_data.c - LEX_DATA_INCLUDES = cmu_lex_data_raw.c cmu_lex_num_bytes.c \ - cmu_lex_phones_huff_table.c cmu_lex_entries_huff_table.c - --OBJS = $(SRCS:.c=.o) -+include $(TOP)/config/config -+ifdef SHFLAGS -+OBJS := $(SRCS:.c=.os) -+else -+OBJS := $(SRCS:.c=.o) -+endif -+ - SCRIPTS=make_cmulex - - SCM= -Index: configure -=================================================================== ---- flite-1.3-release/configure (.../flite-1.3-orig) (revision 7) -+++ flite-1.3-release/configure (.../release-1.2) (revision 7) -@@ -1,324 +1,38 @@ - #! /bin/sh -+ - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.57. -+# Generated automatically using autoconf version 2.13 -+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. - # --# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 --# Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. --## --------------------- ## --## M4sh Initialization. ## --## --------------------- ## - --# Be Bourne compatible --if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -- emulate sh -- NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -- # is contrary to our usage. Disable this feature. -- alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix --fi -- --# Support unset when possible. --if (FOO=FOO; unset FOO) >/dev/null 2>&1; then -- as_unset=unset --else -- as_unset=false --fi -- -- --# Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH --PS1='$ ' --PS2='> ' --PS4='+ ' -- --# NLS nuisances. --for as_var in \ -- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -- LC_TELEPHONE LC_TIME --do -- if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then -- eval $as_var=C; export $as_var -- else -- $as_unset $as_var -- fi --done -- --# Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -- as_expr=expr --else -- as_expr=false --fi -- --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -- as_basename=basename --else -- as_basename=false --fi -- -- --# Name of the executable. --as_me=`$as_basename "$0" || --$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -- X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || --echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- -- --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -- --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi -- -- -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -- -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -- -- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -- # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -- sed ' -- N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -- t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -- ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -- { (exit 1); exit 1; }; } -- -- # Don't try to exec as it changes $[0], causing all sort of problems -- # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -- # Exit status is that of the last command. -- exit --} -- -- --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; --esac -- --if expr a : '\(a\)' >/dev/null 2>&1; then -- as_expr=expr --else -- as_expr=false --fi -- --rm -f conf$$ conf$$.exe conf$$.file --echo >conf$$.file --if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -- as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi --elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln --else -- as_ln_s='cp -p' --fi --rm -f conf$$ conf$$.exe conf$$.file -- --if mkdir -p . 2>/dev/null; then -- as_mkdir_p=: --else -- as_mkdir_p=false --fi -- --as_executable_p="test -f" -- --# Sed expression to map a string onto a valid CPP name. --as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" -- --# Sed expression to map a string onto a valid variable name. --as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -- -- --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- -- --# Name of the host. --# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, --# so uname gets run too. --ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -- --exec 6>&1 -- --# --# Initializations. --# -+# Defaults: -+ac_help= - ac_default_prefix=/usr/local --ac_config_libobj_dir=. --cross_compiling=no --subdirs= --MFLAGS= --MAKEFLAGS= --SHELL=${CONFIG_SHELL-/bin/sh} -+# Any additions from configure.in: -+ac_help="$ac_help -+ --disable-shared without shared library support" -+ac_help="$ac_help -+ --disable-sockets without socket support" -+ac_help="$ac_help -+ --with-audio with specific audio support (none linux freebsd etc) " -+ac_help="$ac_help -+ --with-lang with language " -+ac_help="$ac_help -+ --with-vox with vox " -+ac_help="$ac_help -+ --with-lex with lexicon " - --# Maximum number of lines to put in a shell here document. --# This variable seems obsolete. It should probably be removed, and --# only ac_max_sed_lines should be used. --: ${ac_max_here_lines=38} -- --# Identity of this package. --PACKAGE_NAME= --PACKAGE_TARNAME= --PACKAGE_VERSION= --PACKAGE_STRING= --PACKAGE_BUGREPORT= -- --ac_unique_file="include/flite.h" --# Factoring default headers for most tests. --ac_includes_default="\ --#include <stdio.h> --#if HAVE_SYS_TYPES_H --# include <sys/types.h> --#endif --#if HAVE_SYS_STAT_H --# include <sys/stat.h> --#endif --#if STDC_HEADERS --# include <stdlib.h> --# include <stddef.h> --#else --# if HAVE_STDLIB_H --# include <stdlib.h> --# endif --#endif --#if HAVE_STRING_H --# if !STDC_HEADERS && HAVE_MEMORY_H --# include <memory.h> --# endif --# include <string.h> --#endif --#if HAVE_STRINGS_H --# include <strings.h> --#endif --#if HAVE_INTTYPES_H --# include <inttypes.h> --#else --# if HAVE_STDINT_H --# include <stdint.h> --# endif --#endif --#if HAVE_UNISTD_H --# include <unistd.h> --#endif" -- --ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT RANLIB ac_ct_RANLIB INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA AR ac_ct_AR TARGET_OS TARGET_CPU M68KCC LEXDEFS VOXDEFS HOST_OS HOST_CPU OTHERLIBS SHFLAGS MMAPTYPE STDIOTYPE CPP EGREP AUDIODRIVER AUDIODEFS AUDIOLIBS FL_LANG FL_VOX FL_LEX LIBOBJS LTLIBOBJS' --ac_subst_files='' -- - # Initialize some variables set by options. --ac_init_help= --ac_init_version=false - # The variables have the same names as the options, with - # dashes changed to underlines. --cache_file=/dev/null -+build=NONE -+cache_file=./config.cache - exec_prefix=NONE -+host=NONE - no_create= -+nonopt=NONE - no_recursion= - prefix=NONE - program_prefix=NONE -@@ -327,15 +41,10 @@ - silent= - site= - srcdir= -+target=NONE - verbose= - x_includes=NONE - x_libraries=NONE -- --# Installation directory options. --# These are left unexpanded so users can "make install exec_prefix=/foo" --# and all the variables that are supposed to be based on exec_prefix --# by default will actually change. --# Use braces instead of parens because sh, perl, etc. also accept them. - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' -@@ -349,9 +58,17 @@ - infodir='${prefix}/info' - mandir='${prefix}/man' - -+# Initialize some other variables. -+subdirs= -+MFLAGS= MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+# Maximum number of lines to put in a shell here document. -+ac_max_here_lines=12 -+ - ac_prev= - for ac_option - do -+ - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" -@@ -359,59 +76,59 @@ - continue - fi - -- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` -+ case "$ac_option" in -+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; -+ *) ac_optarg= ;; -+ esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case $ac_option in -+ case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) -- bindir=$ac_optarg ;; -+ bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) -- ac_prev=build_alias ;; -+ ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) -- build_alias=$ac_optarg ;; -+ build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) -- cache_file=$ac_optarg ;; -+ cache_file="$ac_optarg" ;; - -- --config-cache | -C) -- cache_file=config.cache ;; -- - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) -- datadir=$ac_optarg ;; -+ datadir="$ac_optarg" ;; - - -disable-* | --disable-*) -- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -- { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- eval "enable_$ac_feature=no" ;; -+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then -+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } -+ fi -+ ac_feature=`echo $ac_feature| sed 's/-/_/g'` -+ eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) -- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -- { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then -+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } -+ fi -+ ac_feature=`echo $ac_feature| sed 's/-/_/g'` -+ case "$ac_option" in -+ *=*) ;; - *) ac_optarg=yes ;; - esac -- eval "enable_$ac_feature='$ac_optarg'" ;; -+ eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -420,47 +137,95 @@ - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) -- exec_prefix=$ac_optarg ;; -+ exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - -- -help | --help | --hel | --he | -h) -- ac_init_help=long ;; -- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) -- ac_init_help=recursive ;; -- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) -- ac_init_help=short ;; -+ -help | --help | --hel | --he) -+ # Omit some internal or obsolete options to make the list less imposing. -+ # This message is too long to be a string in the A/UX 3.1 sh. -+ cat << EOF -+Usage: configure [options] [host] -+Options: [defaults in brackets after descriptions] -+Configuration: -+ --cache-file=FILE cache test results in FILE -+ --help print this message -+ --no-create do not create output files -+ --quiet, --silent do not print \`checking...' messages -+ --version print the version of autoconf that created configure -+Directory and file names: -+ --prefix=PREFIX install architecture-independent files in PREFIX -+ [$ac_default_prefix] -+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -+ [same as prefix] -+ --bindir=DIR user executables in DIR [EPREFIX/bin] -+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] -+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec] -+ --datadir=DIR read-only architecture-independent data in DIR -+ [PREFIX/share] -+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data in DIR -+ [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] -+ --libdir=DIR object code libraries in DIR [EPREFIX/lib] -+ --includedir=DIR C header files in DIR [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] -+ --infodir=DIR info documentation in DIR [PREFIX/info] -+ --mandir=DIR man documentation in DIR [PREFIX/man] -+ --srcdir=DIR find the sources in DIR [configure dir or ..] -+ --program-prefix=PREFIX prepend PREFIX to installed program names -+ --program-suffix=SUFFIX append SUFFIX to installed program names -+ --program-transform-name=PROGRAM -+ run sed PROGRAM on installed program names -+EOF -+ cat << EOF -+Host type: -+ --build=BUILD configure for building on BUILD [BUILD=HOST] -+ --host=HOST configure for HOST [guessed] -+ --target=TARGET configure for TARGET [TARGET=HOST] -+Features and packages: -+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] -+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -+ --x-includes=DIR X include files are in DIR -+ --x-libraries=DIR X library files are in DIR -+EOF -+ if test -n "$ac_help"; then -+ echo "--enable and --with options recognized:$ac_help" -+ fi -+ exit 0 ;; - - -host | --host | --hos | --ho) -- ac_prev=host_alias ;; -+ ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) -- host_alias=$ac_optarg ;; -+ host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) -- includedir=$ac_optarg ;; -+ includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) -- infodir=$ac_optarg ;; -+ infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) -- libdir=$ac_optarg ;; -+ libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) -- libexecdir=$ac_optarg ;; -+ libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ -@@ -469,19 +234,19 @@ - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -- localstatedir=$ac_optarg ;; -+ localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) -- mandir=$ac_optarg ;; -+ mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -- | --no-cr | --no-c | -n) -+ | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -@@ -495,26 +260,26 @@ - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) -- oldincludedir=$ac_optarg ;; -+ oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) -- prefix=$ac_optarg ;; -+ prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) -- program_prefix=$ac_optarg ;; -+ program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) -- program_suffix=$ac_optarg ;; -+ program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ -@@ -531,7 +296,7 @@ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) -- program_transform_name=$ac_optarg ;; -+ program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) -@@ -541,7 +306,7 @@ - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) -- sbindir=$ac_optarg ;; -+ sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ -@@ -552,57 +317,58 @@ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) -- sharedstatedir=$ac_optarg ;; -+ sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) -- site=$ac_optarg ;; -+ site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -- srcdir=$ac_optarg ;; -+ srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) -- sysconfdir=$ac_optarg ;; -+ sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) -- ac_prev=target_alias ;; -+ ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) -- target_alias=$ac_optarg ;; -+ target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - -- -version | --version | --versio | --versi | --vers | -V) -- ac_init_version=: ;; -+ -version | --version | --versio | --versi | --vers) -+ echo "configure generated by autoconf version 2.13" -+ exit 0 ;; - - -with-* | --with-*) -- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -- { (exit 1); exit 1; }; } -+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then -+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } -+ fi - ac_package=`echo $ac_package| sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -+ case "$ac_option" in -+ *=*) ;; - *) ac_optarg=yes ;; - esac -- eval "with_$ac_package='$ac_optarg'" ;; -+ eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) -- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -- { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package | sed 's/-/_/g'` -- eval "with_$ac_package=no" ;; -+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then -+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } -+ fi -+ ac_package=`echo $ac_package| sed 's/-/_/g'` -+ eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. -@@ -613,110 +379,99 @@ - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) -- x_includes=$ac_optarg ;; -+ x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) -- x_libraries=$ac_optarg ;; -+ x_libraries="$ac_optarg" ;; - -- -*) { echo "$as_me: error: unrecognized option: $ac_option --Try \`$0 --help' for more information." >&2 -- { (exit 1); exit 1; }; } -+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - -- *=*) -- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` -- # Reject names that are not valid shell variable names. -- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -- { (exit 1); exit 1; }; } -- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -- eval "$ac_envvar='$ac_optarg'" -- export $ac_envvar ;; -- - *) -- # FIXME: should be removed in autoconf 3.0. -- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} -+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then -+ echo "configure: warning: $ac_option: invalid host type" 1>&2 -+ fi -+ if test "x$nonopt" != xNONE; then -+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } -+ fi -+ nonopt="$ac_option" - ;; - - esac - done - - if test -n "$ac_prev"; then -- ac_option=--`echo $ac_prev | sed 's/_/-/g'` -- { echo "$as_me: error: missing argument to $ac_option" >&2 -- { (exit 1); exit 1; }; } -+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } - fi - --# Be sure to have absolute paths. --for ac_var in exec_prefix prefix --do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -- esac --done -+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - --# Be sure to have absolute paths. --for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -- localstatedir libdir includedir oldincludedir infodir mandir -+# File descriptor usage: -+# 0 standard input -+# 1 file creation -+# 2 errors and warnings -+# 3 some systems may open it to /dev/tty -+# 4 used on the Kubota Titan -+# 6 checking for... messages and results -+# 5 compiler messages saved in config.log -+if test "$silent" = yes; then -+ exec 6>/dev/null -+else -+ exec 6>&1 -+fi -+exec 5>./config.log -+ -+echo "\ -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. -+" 1>&5 -+ -+# Strip out --no-create and --no-recursion so they do not pile up. -+# Also quote any args containing shell metacharacters. -+ac_configure_args= -+for ac_arg - do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+ case "$ac_arg" in -+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -+ | --no-cr | --no-c) ;; -+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; -+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) -+ ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac - done - --# There might be people who depend on the old broken behavior: `$host' --# used to hold the argument of --host etc. --# FIXME: To remove some day. --build=$build_alias --host=$host_alias --target=$target_alias -+# NLS nuisances. -+# Only set these to C if already set. These must not be set unconditionally -+# because not all systems understand e.g. LANG=C (notably SCO). -+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -+# Non-C LC_CTYPE values break the ctype check. -+if test "${LANG+set}" = set; then LANG=C; export LANG; fi -+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - --# FIXME: To remove some day. --if test "x$host_alias" != x; then -- if test "x$build_alias" = x; then -- cross_compiling=maybe -- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -- If a cross compiler is detected then cross compile mode will be used." >&2 -- elif test "x$build_alias" != "x$host_alias"; then -- cross_compiling=yes -- fi --fi -+# confdefs.h avoids OS command line length limits that DEFS can exceed. -+rm -rf conftest* confdefs.h -+# AIX cpp loses on an empty file, so make sure it contains at least a newline. -+echo > confdefs.h - --ac_tool_prefix= --test -n "$host_alias" && ac_tool_prefix=$host_alias- -+# A filename unique to this package, relative to the directory that -+# configure is in, which we can look for to find out if srcdir is correct. -+ac_unique_file=include/flite.h - --test "$silent" = yes && exec 6>/dev/null -- -- - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. -- ac_confdir=`(dirname "$0") 2>/dev/null || --$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$0" : 'X\(//\)[^/]' \| \ -- X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$0" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ ac_prog=$0 -+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` -+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. -@@ -726,441 +481,13 @@ - fi - if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -- { (exit 1); exit 1; }; } -+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -- { (exit 1); exit 1; }; } -+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi - fi --(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -- { (exit 1); exit 1; }; } --srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` --ac_env_build_alias_set=${build_alias+set} --ac_env_build_alias_value=$build_alias --ac_cv_env_build_alias_set=${build_alias+set} --ac_cv_env_build_alias_value=$build_alias --ac_env_host_alias_set=${host_alias+set} --ac_env_host_alias_value=$host_alias --ac_cv_env_host_alias_set=${host_alias+set} --ac_cv_env_host_alias_value=$host_alias --ac_env_target_alias_set=${target_alias+set} --ac_env_target_alias_value=$target_alias --ac_cv_env_target_alias_set=${target_alias+set} --ac_cv_env_target_alias_value=$target_alias --ac_env_CC_set=${CC+set} --ac_env_CC_value=$CC --ac_cv_env_CC_set=${CC+set} --ac_cv_env_CC_value=$CC --ac_env_CFLAGS_set=${CFLAGS+set} --ac_env_CFLAGS_value=$CFLAGS --ac_cv_env_CFLAGS_set=${CFLAGS+set} --ac_cv_env_CFLAGS_value=$CFLAGS --ac_env_LDFLAGS_set=${LDFLAGS+set} --ac_env_LDFLAGS_value=$LDFLAGS --ac_cv_env_LDFLAGS_set=${LDFLAGS+set} --ac_cv_env_LDFLAGS_value=$LDFLAGS --ac_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_env_CPPFLAGS_value=$CPPFLAGS --ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_cv_env_CPPFLAGS_value=$CPPFLAGS --ac_env_CPP_set=${CPP+set} --ac_env_CPP_value=$CPP --ac_cv_env_CPP_set=${CPP+set} --ac_cv_env_CPP_value=$CPP -+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - --# --# Report the --help message. --# --if test "$ac_init_help" = "long"; then -- # Omit some internal or obsolete options to make the list less imposing. -- # This message is too long to be a string in the A/UX 3.1 sh. -- cat <<_ACEOF --\`configure' configures this package to adapt to many kinds of systems. -- --Usage: $0 [OPTION]... [VAR=VALUE]... -- --To assign environment variables (e.g., CC, CFLAGS...), specify them as --VAR=VALUE. See below for descriptions of some of the useful variables. -- --Defaults for the options are specified in brackets. -- --Configuration: -- -h, --help display this help and exit -- --help=short display options specific to this package -- --help=recursive display the short help of all the included packages -- -V, --version display version information and exit -- -q, --quiet, --silent do not print \`checking...' messages -- --cache-file=FILE cache test results in FILE [disabled] -- -C, --config-cache alias for \`--cache-file=config.cache' -- -n, --no-create do not create output files -- --srcdir=DIR find the sources in DIR [configure dir or \`..'] -- --_ACEOF -- -- cat <<_ACEOF --Installation directories: -- --prefix=PREFIX install architecture-independent files in PREFIX -- [$ac_default_prefix] -- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -- [PREFIX] -- --By default, \`make install' will install all the files in --\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify --an installation prefix other than \`$ac_default_prefix' using \`--prefix', --for instance \`--prefix=\$HOME'. -- --For better control, use the options below. -- --Fine tuning of the installation directories: -- --bindir=DIR user executables [EPREFIX/bin] -- --sbindir=DIR system admin executables [EPREFIX/sbin] -- --libexecdir=DIR program executables [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data [PREFIX/share] -- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -- --localstatedir=DIR modifiable single-machine data [PREFIX/var] -- --libdir=DIR object code libraries [EPREFIX/lib] -- --includedir=DIR C header files [PREFIX/include] -- --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --infodir=DIR info documentation [PREFIX/info] -- --mandir=DIR man documentation [PREFIX/man] --_ACEOF -- -- cat <<\_ACEOF -- --System types: -- --build=BUILD configure for building on BUILD [guessed] -- --host=HOST cross-compile to build programs to run on HOST [BUILD] -- --target=TARGET configure for building compilers for TARGET [HOST] --_ACEOF --fi -- --if test -n "$ac_init_help"; then -- -- cat <<\_ACEOF -- --Optional Features: -- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -- --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -- --disable-shared without shared library support -- --disable-sockets without socket support -- --Optional Packages: -- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] -- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -- --with-audio with specific audio support (none linux freebsd etc) -- --with-lang with language -- --with-vox with vox -- --with-lex with lexicon -- --Some influential environment variables: -- CC C compiler command -- CFLAGS C compiler flags -- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a -- nonstandard directory <lib dir> -- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have -- headers in a nonstandard directory <include dir> -- CPP C preprocessor -- --Use these variables to override the choices made by `configure' or to help --it to find libraries and programs with nonstandard names/locations. -- --_ACEOF --fi -- --if test "$ac_init_help" = "recursive"; then -- # If there are subdirs, report their specific --help. -- ac_popdir=`pwd` -- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d $ac_dir || continue -- ac_builddir=. -- --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -- --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac --# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be --# absolute. --ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` --ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` --ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` --ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` -- -- cd $ac_dir -- # Check for guested configure; otherwise get Cygnus style configure. -- if test -f $ac_srcdir/configure.gnu; then -- echo -- $SHELL $ac_srcdir/configure.gnu --help=recursive -- elif test -f $ac_srcdir/configure; then -- echo -- $SHELL $ac_srcdir/configure --help=recursive -- elif test -f $ac_srcdir/configure.ac || -- test -f $ac_srcdir/configure.in; then -- echo -- $ac_configure --help -- else -- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -- fi -- cd $ac_popdir -- done --fi -- --test -n "$ac_init_help" && exit 0 --if $ac_init_version; then -- cat <<\_ACEOF -- --Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 --Free Software Foundation, Inc. --This configure script is free software; the Free Software Foundation --gives unlimited permission to copy, distribute and modify it. --_ACEOF -- exit 0 --fi --exec 5>config.log --cat >&5 <<_ACEOF --This file contains any messages produced by compilers while --running configure, to aid debugging if configure makes a mistake. -- --It was created by $as_me, which was --generated by GNU Autoconf 2.57. Invocation command line was -- -- $ $0 $@ -- --_ACEOF --{ --cat <<_ASUNAME --## --------- ## --## Platform. ## --## --------- ## -- --hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` --uname -m = `(uname -m) 2>/dev/null || echo unknown` --uname -r = `(uname -r) 2>/dev/null || echo unknown` --uname -s = `(uname -s) 2>/dev/null || echo unknown` --uname -v = `(uname -v) 2>/dev/null || echo unknown` -- --/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` --/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -- --/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` --/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` --/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --hostinfo = `(hostinfo) 2>/dev/null || echo unknown` --/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` --/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` --/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -- --_ASUNAME -- --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- echo "PATH: $as_dir" --done -- --} >&5 -- --cat >&5 <<_ACEOF -- -- --## ----------- ## --## Core tests. ## --## ----------- ## -- --_ACEOF -- -- --# Keep a trace of the command line. --# Strip out --no-create and --no-recursion so they do not pile up. --# Strip out --silent because we don't want to record it for future runs. --# Also quote any args containing shell meta-characters. --# Make two passes to allow for proper duplicate-argument suppression. --ac_configure_args= --ac_configure_args0= --ac_configure_args1= --ac_sep= --ac_must_keep_next=false --for ac_pass in 1 2 --do -- for ac_arg -- do -- case $ac_arg in -- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -- -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -- | -silent | --silent | --silen | --sile | --sil) -- continue ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -- esac -- case $ac_pass in -- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -- 2) -- ac_configure_args1="$ac_configure_args1 '$ac_arg'" -- if test $ac_must_keep_next = true; then -- ac_must_keep_next=false # Got value, back to normal. -- else -- case $ac_arg in -- *=* | --config-cache | -C | -disable-* | --disable-* \ -- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ -- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ -- | -with-* | --with-* | -without-* | --without-* | --x) -- case "$ac_configure_args0 " in -- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; -- esac -- ;; -- -* ) ac_must_keep_next=true ;; -- esac -- fi -- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -- # Get rid of the leading space. -- ac_sep=" " -- ;; -- esac -- done --done --$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } --$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -- --# When interrupted or exit'd, cleanup temporary files, and complete --# config.log. We remove comments because anyway the quotes in there --# would cause problems or look ugly. --# WARNING: Be sure not to use single quotes in there, as some shells, --# such as our DU 5.0 friend, will then `close' the trap. --trap 'exit_status=$? -- # Save into config.log some information that might help in debugging. -- { -- echo -- -- cat <<\_ASBOX --## ---------------- ## --## Cache variables. ## --## ---------------- ## --_ASBOX -- echo -- # The following way of writing the cache mishandles newlines in values, --{ -- (set) 2>&1 | -- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -- sed -n \ -- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" -- ;; -- *) -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -- ;; -- esac; --} -- echo -- -- cat <<\_ASBOX --## ----------------- ## --## Output variables. ## --## ----------------- ## --_ASBOX -- echo -- for ac_var in $ac_subst_vars -- do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -- done | sort -- echo -- -- if test -n "$ac_subst_files"; then -- cat <<\_ASBOX --## ------------- ## --## Output files. ## --## ------------- ## --_ASBOX -- echo -- for ac_var in $ac_subst_files -- do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -- done | sort -- echo -- fi -- -- if test -s confdefs.h; then -- cat <<\_ASBOX --## ----------- ## --## confdefs.h. ## --## ----------- ## --_ASBOX -- echo -- sed "/^$/d" confdefs.h | sort -- echo -- fi -- test "$ac_signal" != 0 && -- echo "$as_me: caught signal $ac_signal" -- echo "$as_me: exit $exit_status" -- } >&5 -- rm -f core core.* *.core && -- rm -rf conftest* confdefs* conf$$* $ac_clean_files && -- exit $exit_status -- ' 0 --for ac_signal in 1 2 13 15; do -- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal --done --ac_signal=0 -- --# confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo >confdefs.h -- --# Predefined preprocessor variables. -- --cat >>confdefs.h <<_ACEOF --#define PACKAGE_NAME "$PACKAGE_NAME" --_ACEOF -- -- --cat >>confdefs.h <<_ACEOF --#define PACKAGE_TARNAME "$PACKAGE_TARNAME" --_ACEOF -- -- --cat >>confdefs.h <<_ACEOF --#define PACKAGE_VERSION "$PACKAGE_VERSION" --_ACEOF -- -- --cat >>confdefs.h <<_ACEOF --#define PACKAGE_STRING "$PACKAGE_STRING" --_ACEOF -- -- --cat >>confdefs.h <<_ACEOF --#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" --_ACEOF -- -- --# Let the site file select an alternate cache file if it wants to. - # Prefer explicitly selected file to automatically selected ones. - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then -@@ -1171,106 +498,42 @@ - fi - for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then -- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 --echo "$as_me: loading site script $ac_site_file" >&6;} -- sed 's/^/| /' "$ac_site_file" >&5 -+ echo "loading site script $ac_site_file" - . "$ac_site_file" - fi - done - - if test -r "$cache_file"; then -- # Some versions of bash will fail to source /dev/null (special -- # files actually), so we avoid doing that. -- if test -f "$cache_file"; then -- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 --echo "$as_me: loading cache $cache_file" >&6;} -- case $cache_file in -- [\\/]* | ?:[\\/]* ) . $cache_file;; -- *) . ./$cache_file;; -- esac -- fi -+ echo "loading cache $cache_file" -+ . $cache_file - else -- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 --echo "$as_me: creating cache $cache_file" >&6;} -- >$cache_file -+ echo "creating cache $cache_file" -+ > $cache_file - fi - --# Check that the precious variables saved in the cache have kept the same --# value. --ac_cache_corrupted=false --for ac_var in `(set) 2>&1 | -- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do -- eval ac_old_set=\$ac_cv_env_${ac_var}_set -- eval ac_new_set=\$ac_env_${ac_var}_set -- eval ac_old_val="\$ac_cv_env_${ac_var}_value" -- eval ac_new_val="\$ac_env_${ac_var}_value" -- case $ac_old_set,$ac_new_set in -- set,) -- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -- ac_cache_corrupted=: ;; -- ,set) -- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -- ac_cache_corrupted=: ;; -- ,);; -- *) -- if test "x$ac_old_val" != "x$ac_new_val"; then -- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 --echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 --echo "$as_me: former value: $ac_old_val" >&2;} -- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 --echo "$as_me: current value: $ac_new_val" >&2;} -- ac_cache_corrupted=: -- fi;; -- esac -- # Pass precious variables to config.status. -- if test "$ac_new_set" = set; then -- case $ac_new_val in -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -- *) ac_arg=$ac_var=$ac_new_val ;; -- esac -- case " $ac_configure_args " in -- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -- esac -- fi --done --if $ac_cache_corrupted; then -- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 --echo "$as_me: error: changes in the environment can compromise the build" >&2;} -- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 --echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -- { (exit 1); exit 1; }; } --fi -- - ac_ext=c -+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. - ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -+cross_compiling=$ac_cv_prog_cc_cross - -+ac_exeext= -+ac_objext=o -+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then -+ # Stardent Vistra SVR4 grep lacks -e, says [email protected]. -+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then -+ ac_n= ac_c=' -+' ac_t=' ' -+ else -+ ac_n=-n ac_c= ac_t= -+ fi -+else -+ ac_n= ac_c='\c' ac_t= -+fi - - - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - ac_aux_dir= - for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then -@@ -1281,740 +544,312 @@ - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -- elif test -f $ac_dir/shtool; then -- ac_aux_dir=$ac_dir -- ac_install_sh="$ac_aux_dir/shtool install -c" -- break - fi - done - if test -z "$ac_aux_dir"; then -- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 --echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} -- { (exit 1); exit 1; }; } -+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } - fi --ac_config_guess="$SHELL $ac_aux_dir/config.guess" --ac_config_sub="$SHELL $ac_aux_dir/config.sub" --ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. -+ac_config_guess=$ac_aux_dir/config.guess -+ac_config_sub=$ac_aux_dir/config.sub -+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - --# Make sure we can run config.sub. --$ac_config_sub sun4 >/dev/null 2>&1 || -- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 --echo "$as_me: error: cannot run $ac_config_sub" >&2;} -- { (exit 1); exit 1; }; } - --echo "$as_me:$LINENO: checking build system type" >&5 --echo $ECHO_N "checking build system type... $ECHO_C" >&6 --if test "${ac_cv_build+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_build_alias=$build_alias --test -z "$ac_cv_build_alias" && -- ac_cv_build_alias=`$ac_config_guess` --test -z "$ac_cv_build_alias" && -- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 --echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -- { (exit 1); exit 1; }; } --ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} -- { (exit 1); exit 1; }; } -+# Do some error checking and defaulting for the host and target type. -+# The inputs are: -+# configure --host=HOST --target=TARGET --build=BUILD NONOPT -+# -+# The rules are: -+# 1. You are not allowed to specify --host, --target, and nonopt at the -+# same time. -+# 2. Host defaults to nonopt. -+# 3. If nonopt is not specified, then host defaults to the current host, -+# as determined by config.guess. -+# 4. Target and build default to nonopt. -+# 5. If nonopt is not specified, then target and build default to host. - -+# The aliases save the names the user supplied, while $host etc. -+# will get canonicalized. -+case $host---$target---$nonopt in -+NONE---*---* | *---NONE---* | *---*---NONE) ;; -+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -+esac -+ -+ -+# Make sure we can run config.sub. -+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } - fi --echo "$as_me:$LINENO: result: $ac_cv_build" >&5 --echo "${ECHO_T}$ac_cv_build" >&6 --build=$ac_cv_build --build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -+echo $ac_n "checking host system type""... $ac_c" 1>&6 -+echo "configure:585: checking host system type" >&5 - --echo "$as_me:$LINENO: checking host system type" >&5 --echo $ECHO_N "checking host system type... $ECHO_C" >&6 --if test "${ac_cv_host+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_host_alias=$host_alias --test -z "$ac_cv_host_alias" && -- ac_cv_host_alias=$ac_cv_build_alias --ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} -- { (exit 1); exit 1; }; } -+host_alias=$host -+case "$host_alias" in -+NONE) -+ case $nonopt in -+ NONE) -+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : -+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } -+ fi ;; -+ *) host_alias=$nonopt ;; -+ esac ;; -+esac - --fi --echo "$as_me:$LINENO: result: $ac_cv_host" >&5 --echo "${ECHO_T}$ac_cv_host" >&6 --host=$ac_cv_host --host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+echo "$ac_t""$host" 1>&6 - -+echo $ac_n "checking target system type""... $ac_c" 1>&6 -+echo "configure:606: checking target system type" >&5 - --echo "$as_me:$LINENO: checking target system type" >&5 --echo $ECHO_N "checking target system type... $ECHO_C" >&6 --if test "${ac_cv_target+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_target_alias=$target_alias --test "x$ac_cv_target_alias" = "x" && -- ac_cv_target_alias=$ac_cv_host_alias --ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} -- { (exit 1); exit 1; }; } -+target_alias=$target -+case "$target_alias" in -+NONE) -+ case $nonopt in -+ NONE) target_alias=$host_alias ;; -+ *) target_alias=$nonopt ;; -+ esac ;; -+esac - --fi --echo "$as_me:$LINENO: result: $ac_cv_target" >&5 --echo "${ECHO_T}$ac_cv_target" >&6 --target=$ac_cv_target --target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` -+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+echo "$ac_t""$target" 1>&6 - -+echo $ac_n "checking build system type""... $ac_c" 1>&6 -+echo "configure:624: checking build system type" >&5 - --# The aliases save the names the user supplied, while $host etc. --# will get canonicalized. --test -n "$target_alias" && -+build_alias=$build -+case "$build_alias" in -+NONE) -+ case $nonopt in -+ NONE) build_alias=$host_alias ;; -+ *) build_alias=$nonopt ;; -+ esac ;; -+esac -+ -+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+echo "$ac_t""$build" 1>&6 -+ -+test "$host_alias" != "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. --set dummy ${ac_tool_prefix}gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$CC"; then -- ac_cv_prog_CC="$CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_CC="${ac_tool_prefix}gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done - --fi --fi --CC=$ac_cv_prog_CC --if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- --fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -- # Extract the first word of "gcc", so it can be a program name with args. -+# Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -+echo "configure:649: checking for $ac_word" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi -- --if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. --set dummy ${ac_tool_prefix}cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. - else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_CC="${ac_tool_prefix}cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -+ ac_dummy="$PATH" -+ for ac_dir in $ac_dummy; do -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$ac_word; then -+ ac_cv_prog_CC="gcc" -+ break -+ fi -+ done -+ IFS="$ac_save_ifs" - fi - fi --CC=$ac_cv_prog_CC -+CC="$ac_cv_prog_CC" - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ echo "$ac_t""$CC" 1>&6 - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ echo "$ac_t""no" 1>&6 - fi - --fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi -- --fi - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -+echo "configure:679: checking for $ac_word" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. - else -+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -- ac_prog_rejected=yes -- continue -- fi -- ac_cv_prog_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -+ ac_dummy="$PATH" -+ for ac_dir in $ac_dummy; do -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$ac_word; then -+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" -+ break -+ fi -+ done -+ IFS="$ac_save_ifs" - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift -- if test $# != 0; then -+ if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift -- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" -+ set dummy "$ac_dir/$ac_word" "$@" -+ shift -+ ac_cv_prog_CC="$@" - fi - fi - fi - fi --CC=$ac_cv_prog_CC -+CC="$ac_cv_prog_CC" - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ echo "$ac_t""$CC" 1>&6 - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ echo "$ac_t""no" 1>&6 - fi - --fi --if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- for ac_prog in cl -- do -- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. --set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ if test -z "$CC"; then -+ case "`uname -s`" in -+ *win32* | *WIN32*) -+ # Extract the first word of "cl", so it can be a program name with args. -+set dummy cl; ac_word=$2 -+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -+echo "configure:730: checking for $ac_word" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. - else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -+ ac_dummy="$PATH" -+ for ac_dir in $ac_dummy; do -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$ac_word; then -+ ac_cv_prog_CC="cl" -+ break -+ fi -+ done -+ IFS="$ac_save_ifs" - fi - fi --CC=$ac_cv_prog_CC -+CC="$ac_cv_prog_CC" - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ echo "$ac_t""$CC" 1>&6 - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ echo "$ac_t""no" 1>&6 - fi -- -- test -n "$CC" && break -- done --fi --if test -z "$CC"; then -- ac_ct_CC=$CC -- for ac_prog in cl --do -- # Extract the first word of "$ac_prog", so it can be a program name with args. --set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -+ ;; -+ esac - fi --done --done -- -+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } - fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi - -- test -n "$ac_ct_CC" && break --done -+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -+echo "configure:762: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -- CC=$ac_ct_CC --fi -+ac_ext=c -+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -+cross_compiling=$ac_cv_prog_cc_cross - --fi -+cat > conftest.$ac_ext << EOF - -+#line 773 "configure" -+#include "confdefs.h" - --test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH --See \`config.log' for more details." >&5 --echo "$as_me: error: no acceptable C compiler found in \$PATH --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -- --# Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C compiler version" >&5 --ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -- (eval $ac_compiler --version </dev/null >&5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -- (eval $ac_compiler -v </dev/null >&5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -- (eval $ac_compiler -V </dev/null >&5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- --cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --ac_clean_files_save=$ac_clean_files --ac_clean_files="$ac_clean_files a.out a.exe b.out" --# Try to create an executable without -o first, disregard a.out. --# It will help us diagnose broken compilers, and finding out an intuition --# of exeext. --echo "$as_me:$LINENO: checking for C compiler default output" >&5 --echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 --ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` --if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -- (eval $ac_link_default) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- # Find the output, starting from the most likely. This scheme is --# not robust to junk in `.', hence go to wildcards (a.*) only as a last --# resort. -- --# Be careful to initialize this variable, since it used to be cached. --# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. --ac_cv_exeext= --# b.out is created by i960 compilers. --for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out --do -- test -f "$ac_file" || continue -- case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -- ;; -- conftest.$ac_ext ) -- # This is the source file. -- ;; -- [ab].out ) -- # We found the default executable, but exeext='' is most -- # certainly right. -- break;; -- *.* ) -- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- # FIXME: I believe we export ac_cv_exeext for Libtool, -- # but it would be cool to find out if it's true. Does anybody -- # maintain Libtool? --akim. -- export ac_cv_exeext -- break;; -- * ) -- break;; -- esac --done --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --{ { echo "$as_me:$LINENO: error: C compiler cannot create executables --See \`config.log' for more details." >&5 --echo "$as_me: error: C compiler cannot create executables --See \`config.log' for more details." >&2;} -- { (exit 77); exit 77; }; } --fi -- --ac_exeext=$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_file" >&5 --echo "${ECHO_T}$ac_file" >&6 -- --# Check the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether the C compiler works" >&5 --echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 --# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 --# If not cross compiling, check that we can run a simple program. --if test "$cross_compiling" != yes; then -- if { ac_try='./$ac_file' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- cross_compiling=no -+main(){return(0);} -+EOF -+if { (eval echo configure:778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -+ ac_cv_prog_cc_works=yes -+ # If we can't run a trivial program, we are probably using a cross compiler. -+ if (./conftest; exit) 2>/dev/null; then -+ ac_cv_prog_cc_cross=no - else -- if test "$cross_compiling" = maybe; then -- cross_compiling=yes -- else -- { { echo "$as_me:$LINENO: error: cannot run C compiled programs. --If you meant to cross compile, use \`--host'. --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot run C compiled programs. --If you meant to cross compile, use \`--host'. --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -- fi -+ ac_cv_prog_cc_cross=yes - fi -+else -+ echo "configure: failed program was:" >&5 -+ cat conftest.$ac_ext >&5 -+ ac_cv_prog_cc_works=no - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+rm -fr conftest* -+ac_ext=c -+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -+cross_compiling=$ac_cv_prog_cc_cross - --rm -f a.out a.exe conftest$ac_cv_exeext b.out --ac_clean_files=$ac_clean_files_save --# Check the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 --echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $cross_compiling" >&5 --echo "${ECHO_T}$cross_compiling" >&6 -- --echo "$as_me:$LINENO: checking for suffix of executables" >&5 --echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- # If both `conftest.exe' and `conftest' are `present' (well, observable) --# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will --# work properly (i.e., refer to `conftest.exe'), while it won't with --# `rm'. --for ac_file in conftest.exe conftest conftest.*; do -- test -f "$ac_file" || continue -- case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- export ac_cv_exeext -- break;; -- * ) break;; -- esac --done --else -- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of executables: cannot compile and link --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -+if test $ac_cv_prog_cc_works = no; then -+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } - fi -+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -+echo "configure:804: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -+cross_compiling=$ac_cv_prog_cc_cross - --rm -f conftest$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 --echo "${ECHO_T}$ac_cv_exeext" >&6 -- --rm -f conftest.$ac_ext --EXEEXT=$ac_cv_exeext --ac_exeext=$EXEEXT --echo "$as_me:$LINENO: checking for suffix of object files" >&5 --echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 --if test "${ac_cv_objext+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -+echo "configure:809: checking whether we are using GNU C" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else -- cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --rm -f conftest.o conftest.obj --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -- case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` -- break;; -- esac --done -+ cat > conftest.c <<EOF -+#ifdef __GNUC__ -+ yes; -+#endif -+EOF -+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then -+ ac_cv_prog_gcc=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of object files: cannot compile --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ ac_cv_prog_gcc=no - fi -- --rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 --echo "${ECHO_T}$ac_cv_objext" >&6 --OBJEXT=$ac_cv_objext --ac_objext=$OBJEXT --echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 --if test "${ac_cv_c_compiler_gnu+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ - --int --main () --{ --#ifndef __GNUC__ -- choke me --#endif -+echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_compiler_gnu=yes -+if test $ac_cv_prog_gcc = yes; then -+ GCC=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_compiler_gnu=no -+ GCC= - fi --rm -f conftest.$ac_objext conftest.$ac_ext --ac_cv_c_compiler_gnu=$ac_compiler_gnu - --fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 --GCC=`test $ac_compiler_gnu = yes && echo yes` --ac_test_CFLAGS=${CFLAGS+set} --ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_g+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ac_test_CFLAGS="${CFLAGS+set}" -+ac_save_CFLAGS="$CFLAGS" -+CFLAGS= -+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -+echo "configure:837: checking whether ${CC-cc} accepts -g" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else -- cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ echo 'void f(){}' > conftest.c -+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_prog_cc_g=no -+fi -+rm -f conftest* - --ac_cv_prog_cc_g=no - fi --rm -f conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+ -+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then -- CFLAGS=$ac_save_CFLAGS -+ CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" -@@ -2028,304 +863,37 @@ - CFLAGS= - fi - fi --echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 --echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_prog_cc_stdc=no --ac_save_CC=$CC --cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <stdarg.h> --#include <stdio.h> --#include <sys/types.h> --#include <sys/stat.h> --/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ --struct buf { int x; }; --FILE * (*rcsopen) (struct buf *, struct stat *, int); --static char *e (p, i) -- char **p; -- int i; --{ -- return p[i]; --} --static char *f (char * (*g) (char **, int), char **p, ...) --{ -- char *s; -- va_list v; -- va_start (v,p); -- s = g (p, va_arg (v,int)); -- va_end (v); -- return s; --} --int test (int i, double x); --struct s1 {int (*f) (int a);}; --struct s2 {int (*f) (double a);}; --int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); --int argc; --char **argv; --int --main () --{ --return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; -- ; -- return 0; --} --_ACEOF --# Don't try gcc -ansi; that turns off useful extensions and --# breaks some systems' header files. --# AIX -qlanglvl=ansi --# Ultrix and OSF/1 -std1 --# HP-UX 10.20 and later -Ae --# HP-UX older versions -Aa -D_HPUX_SOURCE --# SVR4 -Xc -D__EXTENSIONS__ --for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" --do -- CC="$ac_save_CC $ac_arg" -- rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_cc_stdc=$ac_arg --break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --fi --rm -f conftest.$ac_objext --done --rm -f conftest.$ac_ext conftest.$ac_objext --CC=$ac_save_CC -- --fi -- --case "x$ac_cv_prog_cc_stdc" in -- x|xno) -- echo "$as_me:$LINENO: result: none needed" >&5 --echo "${ECHO_T}none needed" >&6 ;; -- *) -- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -- CC="$CC $ac_cv_prog_cc_stdc" ;; --esac -- --# Some people use a C++ compiler to compile C. Since we use `exit', --# in C++ we need to declare it. In case someone uses the same compiler --# for both compiling C and C++ we need to have the C++ compiler decide --# the declaration of exit, since it's the most demanding environment. --cat >conftest.$ac_ext <<_ACEOF --#ifndef __cplusplus -- choke me --#endif --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- for ac_declaration in \ -- ''\ -- '#include <stdlib.h>' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <stdlib.h> --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : -+# Extract the first word of "ranlib", so it can be a program name with args. -+set dummy ranlib; ac_word=$2 -+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -+echo "configure:871: checking for $ac_word" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --continue --fi --rm -f conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --#line $LINENO "configure" --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h --fi -- --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.$ac_objext conftest.$ac_ext --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -- --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. --set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_RANLIB+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. - else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -+ ac_dummy="$PATH" -+ for ac_dir in $ac_dummy; do -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$ac_word; then -+ ac_cv_prog_RANLIB="ranlib" -+ break -+ fi -+ done -+ IFS="$ac_save_ifs" -+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" - fi - fi --RANLIB=$ac_cv_prog_RANLIB -+RANLIB="$ac_cv_prog_RANLIB" - if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 -+ echo "$ac_t""$RANLIB" 1>&6 - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ echo "$ac_t""no" 1>&6 - fi - --fi --if test -z "$ac_cv_prog_RANLIB"; then -- ac_ct_RANLIB=$RANLIB -- # Extract the first word of "ranlib", so it can be a program name with args. --set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_RANLIB"; then -- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_RANLIB="ranlib" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" --fi --fi --ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB --if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- RANLIB=$ac_ct_RANLIB --else -- RANLIB="$ac_cv_prog_RANLIB" --fi -- - # Find a good install program. We prefer a C program (faster), - # so one script is as good as another. But avoid the broken or - # incompatible versions: -@@ -2333,306 +901,158 @@ - # SunOS /usr/etc/install - # IRIX /sbin/install - # AIX /bin/install --# AmigaOS /C/install, which installs bootblocks on floppy discs - # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag - # AFS /usr/afsws/bin/install, which mishandles nonexistent args - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -+echo "configure:910: checking for a BSD compatible install" >&5 - if test -z "$INSTALL"; then --if test "${ac_cv_path_install+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- # Account for people who put trailing slashes in PATH elements. --case $as_dir/ in -- ./ | .// | /cC/* | \ -- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -- /usr/ucb/* ) ;; -- *) -- # OSF1 and SCO ODT 3.0 have their own names for install. -- # Don't use installbsd from OSF since it installs stuff as root -- # by default. -- for ac_prog in ginstall scoinst install; do -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -- if test $ac_prog = install && -- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -- # AIX install. It has an incompatible calling convention. -- : -- elif test $ac_prog = install && -- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -- # program-specific install script used by HP pwplus--don't use. -- : -- else -- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -- break 3 -- fi -- fi -+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" -+ for ac_dir in $PATH; do -+ # Account for people who put trailing slashes in PATH elements. -+ case "$ac_dir/" in -+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ if test -f $ac_dir/$ac_prog; then -+ if test $ac_prog = install && -+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ else -+ ac_cv_path_install="$ac_dir/$ac_prog -c" -+ break 2 -+ fi -+ fi - done -- done -- ;; --esac --done -+ ;; -+ esac -+ done -+ IFS="$ac_save_IFS" - -- - fi - if test "${ac_cv_path_install+set}" = set; then -- INSTALL=$ac_cv_path_install -+ INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. -- INSTALL=$ac_install_sh -+ INSTALL="$ac_install_sh" - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+echo "$ac_t""$INSTALL" 1>&6 - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. - test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - --test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -+if test $host != $build; then -+ ac_tool_prefix=${host_alias}- -+else -+ ac_tool_prefix= -+fi -+ -+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. - set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_AR+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -+echo "configure:971: checking for $ac_word" >&5 -+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then -+ echo $ac_n "(cached) $ac_c" 1>&6 - else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. - else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_AR="${ac_tool_prefix}ar"
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.4.0
Part of the diff is not shown here. View the raw message.
PATCH 4/5 libeigen: remove unused patch
In reply to Maxin B. JohnRemove the following unused patch:
0001-CMakeLists.txt-install-FindEigen3.cmake-script.patch
--- ...Lists.txt-install-FindEigen3.cmake-script.patch | 28 ---------------------- 1 file changed, 28 deletions(-) delete mode 100644 meta-oe/recipes-support/libeigen/libeigen/0001-CMakeLists.txt-install-FindEigen3.cmake-script.patch
meta-oe/recipes-support/libeigen/libeigen/0001-CMakeLists.txt-install-FindEigen3.cmake-script.patch deleted +0 -28
@@ -1,28 +0,0 @@ -From fd8bc66efac1059c1068f804746b01b90177c333 Mon Sep 17 00:00:00 2001 -From: Lukas Bulwahn <[email protected]> -Date: Sun, 18 Oct 2015 16:52:25 +0200 -Subject: [PATCH] CMakeLists.txt: install FindEigen3.cmake script - -Upstream-Status: Pending - -Signed-off-by: Lukas Bulwahn <[email protected]> ---- - CMakeLists.txt | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 76a11b9..ec6c6ea 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -342,6 +342,8 @@ if(EIGEN_BUILD_PKGCONFIG) - ) - endif(EIGEN_BUILD_PKGCONFIG) - -+install(FILES "${PROJECT_SOURCE_DIR}/cmake/FindEigen3.cmake" DESTINATION "${CMAKE_INSTALL_PREFIX}/share/cmake/Modules") -+ - add_subdirectory(Eigen) - - add_subdirectory(doc EXCLUDE_FROM_ALL) --- -1.9.3 -
Signature · 1 line
2.4.0
PATCH 5/5 gst-ffmpeg: remove leftover patch
In reply to Maxin B. JohnRemove the following left-over patch from gst-ffmpeg package which was removed earlier:
lower-rank.diff
--- .../gstreamer-0.10/gst-ffmpeg-0.10.13/lower-rank.diff | 16 ---------------- 1 file changed, 16 deletions(-) delete mode 100644 meta-multimedia/recipes-multimedia/gstreamer-0.10/gst-ffmpeg-0.10.13/lower-rank.diff
meta-multimedia/recipes-multimedia/gstreamer-0.10/gst-ffmpeg-0.10.13/lower-rank.diff deleted +0 -16
@@ -1,16 +0,0 @@ -Lower the rank of ffmpeg plugin so codecs that hook into accelerated pieces (e.g. dsp or hw engines) can get picked over this -Derived from OE by Dongxiao Xu <[email protected]> - -Upstream-Status: Inappropriate [embedded specific] - ---- /tmp/gstffmpegdec.c 2009-03-05 09:31:15.000000000 +0100 -+++ gst-ffmpeg-0.10.6/ext/ffmpeg/gstffmpegdec.c 2009-03-05 09:33:09.000000000 +0100 -@@ -2588,7 +2588,7 @@ - case CODEC_ID_MSMPEG4V3: - case CODEC_ID_H264: - case CODEC_ID_COOK: -- rank = GST_RANK_PRIMARY; -+ rank = GST_RANK_SECONDARY; - break; - case CODEC_ID_DVVIDEO: - /* we have a good dv decoder, fast on both ppc as well as x86. they say
Signature · 1 line
2.4.0