ARM: imx_v6_v7_defconfig: Select CONFIG_SND_SOC_WM8962 explicitly

From: Fabio Estevam <[email protected]>

Currently CONFIG_SND_SOC_WM8962 is selected via SND_SOC_IMX_WM8962 machine driver option.

SND_SOC_IMX_WM8962 will be removed in the next kernel cycle, so select the codec driver directly so that it can still be used by default via the generic fsl-asoc-card machine driver.

---
The patch that removes SND_SOC_IMX_WM8962 is in linux-next:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20180301&id=790d631dcfec6b073b04bb6809bce4c09baf198a

 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

index 9d9c729..3a30843 100644
@@ -284,6 +284,7 @@ CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
 CONFIG_SND_SOC_TLV320AIC3X=y
 CONFIG_SND_SOC_WM8960=y
+CONFIG_SND_SOC_WM8962=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_HID_MULTITOUCH=y
 CONFIG_USB=y

2.7.4

Btw, we may also do this to imx-sgtl5000? I don't have a board to verify it though..

Hi Nicolin,

I will run some tests on mx25/mx53/mx6 boards with sgtl5000.

If all of them work well with the fsl-asoc-card machine driver, then I will send a patch removing imx-sgtl5000 as well.

Applied, thanks.