ARM: dts: aspeed-g5: Add IPMI KCS node
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed-g5: Add IPMI KCS node
The IPMI KCS device part of the LPC interface and is used for communication with the host processor.
---
Hi Joel & Andrew,
The kcs-bmc-aspeed module has been in:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/char/ipmi/kcs_bmc_aspeed.c
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
I updated the device tree node about kcs-bmc, this is passed on my board.
And the patch is generated by rebasing on:
https://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
Please help to review.
BR,
Haiyue
--- arch/arm/boot/dts/aspeed-g5.dtsi | 43 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-g5.dtsi +42 -1
@@ -267,8 +267,40 @@ ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <1>; + kcs_addr = <0x0>; + status = "disabled"; + }; + + kcs2: kcs2@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <2>; + kcs_addr = <0x0>; + status = "disabled"; + }; + + kcs3: kcs3@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <3>; + kcs_addr = <0x0>; + status = "disabled"; + }; }; lpc_host: lpc-host@80 {
@@ -294,6 +326,15 @@ status = "disabled"; }; + kcs4: kcs4@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0xa0>; + interrupts = <8>; + kcs_chan = <4>; + kcs_addr = <0x0>; + status = "disabled"; + }; + lhc: lhc@20 { compatible = "aspeed,ast2500-lhc"; reg = <0x20 0x24 0x48 0x8>;
Signature · 1 line
2.7.4
Joel Stanley
maintainerQuoted 11 lines · Haiyue Wang
The IPMI KCS device part of the LPC interface and is used for communication with the host processor.
Signed-off-by Haiyue Wang <[email protected]>---
Hi Joel & Andrew,The kcs-bmc-aspeed module has been in:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/char/ipmi/kcs_bmc_aspeed.c
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
Quoted 5 lines
I updated the device tree node about kcs-bmc, this is passed on my board.
And the patch is generated by rebasing on:
https://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
Please help to review.
Thanks for the patch. I suggest you submit this patch for inclusion in the upstream kernel. To do this, send it to:
Joel Stanley <[email protected]>
Andrew Jeffery <[email protected]>
[email protected]
[email protected]
[email protected]
And I will consider it for merging.
From there I can backport it into the dev-4.13 tree.
Cheers,
Joel
Quoted 72 lines
BR,
Haiyue--- arch/arm/boot/dts/aspeed-g5.dtsi | 43 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)arch/arm/boot/dts/aspeed-g5.dtsi +42
-2@@ -267,8 +267,40 @@ ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <1>; + kcs_addr = <0x0>; + status = "disabled"; + }; + + kcs2: kcs2@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <2>; + kcs_addr = <0x0>; + status = "disabled"; + }; + + kcs3: kcs3@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0x80>; + interrupts = <8>; + kcs_chan = <3>; + kcs_addr = <0x0>; + status = "disabled"; + }; }; lpc_host: lpc-host@80 {@@ -294,6 +326,15 @@ status = "disabled"; }; + kcs4: kcs4@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + reg = <0x0 0xa0>; + interrupts = <8>; + kcs_chan = <4>; + kcs_addr = <0x0>; + status = "disabled"; + }; + lhc: lhc@20 { compatible = "aspeed,ast2500-lhc"; reg = <0x20 0x24 0x48 0x8>; --2.7.4
Quoted 10 lines · Joel Stanley
Quoted 3 lines
And the patch is generated by rebasing on:
https://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
Please help to review.Thanks for the patch. I suggest you submit this patch for inclusion in the upstream kernel. To do this, send it to:
Joel Stanley<[email protected]>
Andrew Jeffery<[email protected]> [email protected] [email protected]
[email protected]
Got it.
Quoted 8 lines
And I will consider it for merging.
From there I can backport it into the dev-4.13 tree.
Cheers,
Joel