drm/i915: Kill the remaining CHV HBR2 leftovers
Subsystems (2)
PATCH 1/1 drm/i915: Kill the remaining CHV HBR2 leftovers
From: Ville Syrjälä <[email protected]>
AFAIK CHV was supposed to have HBR2 originally, but in the end the feature was dropped. We still have some code leftovers from those early days. Eliminate them.
The extra bit for the training pattern seems to be dead in the hardware. I can set it (in fact I can set almost any reserved bit in the registers) but it doesn't seem to interfere with the operation of the hardware. Either that or I'm very lucky that my displays complete link training with the incorrect pattern being sent out.
--- drivers/gpu/drm/i915/i915_reg.h | 2 -- drivers/gpu/drm/i915/intel_dp.c | 20 ++++---------------- 2 files changed, 4 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -2
@@ -5250,8 +5250,6 @@ enum {#define DP_LINK_TRAIN_OFF (3 << 28)#define DP_LINK_TRAIN_MASK (3 << 28)#define DP_LINK_TRAIN_SHIFT 28 -#define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) -#define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14))/* CPT Link training mode */ #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)
drivers/gpu/drm/i915/intel_dp.c +4 -16
@@ -92,8 +92,6 @@ static const struct dp_link_dpll chv_dpll[] = { { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, {270000 ,/* m2_int = 27, m2_fraction = 0 */ { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, - {540000 ,/* m2_int = 27, m2_fraction = 0 */ - { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } };/**
@@ -2908,10 +2906,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, } }else { -if (IS_CHERRYVIEW (dev_priv)) - *DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else - *DP &= ~DP_LINK_TRAIN_MASK ; + *DP &= ~DP_LINK_TRAIN_MASK ;switch (dp_train_pat &DP_TRAINING_PATTERN_MASK ) {case DP_TRAINING_PATTERN_DISABLE :
@@ -2924,12 +2919,8 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, *DP |=DP_LINK_TRAIN_PAT_2 ;break ;case DP_TRAINING_PATTERN_3 : -if (IS_CHERRYVIEW (dev_priv)) { - *DP |=DP_LINK_TRAIN_PAT_3_CHV ; - }else { -DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); - *DP |=DP_LINK_TRAIN_PAT_2 ; - } +DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); + *DP |=DP_LINK_TRAIN_PAT_2 ;break ; } }
@@ -3668,10 +3659,7 @@ intel_dp_link_down(struct intel_encoder *encoder,DP &= ~DP_LINK_TRAIN_MASK_CPT ;DP |=DP_LINK_TRAIN_PAT_IDLE_CPT ; }else { -if (IS_CHERRYVIEW (dev_priv)) -DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else -DP &= ~DP_LINK_TRAIN_MASK ; +DP &= ~DP_LINK_TRAIN_MASK ;DP |=DP_LINK_TRAIN_PAT_IDLE ; }I915_WRITE (intel_dp->output_reg,DP );
Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Kill the remaining CHV HBR2 leftovers
== Series Details ==
== Series Details ==
Series: drm/i915: Kill the remaining CHV HBR2 leftovers
URL : https://patchwork.freedesktop.org/series/39260/
State : success
== Summary ==
Series 39260v1 drm/i915: Kill the remaining CHV HBR2 leftovers
https://patchwork.freedesktop.org/api/1.0/series/39260/revisions/1/mbox/
---- Known issues:
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
incomplete -> PASS (fi-snb-2520m) fdo#103713
Test prime_vgem:
Subgroup basic-fence-flip:
fail -> PASS (fi-byt-n2820) fdo#104008fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:414s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:423s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:370s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:481s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:277s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:480s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:462s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:453s fi-cfl-8700k total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:393s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:415s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:289s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:506s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:384s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:413s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:443s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:413s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:450s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:489s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:452s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:494s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:581s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:423s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:499s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:516s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:489s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:466s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:406s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:429s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:519s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:386s
Blacklisted hosts:
fi-cfl-u total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:490s
fi-bxt-dsi failed to collect. IGT log at Patchwork_8208/fi-bxt-dsi/run0.log
b2e10fd5e8b2cd72b0e1eba46c1221dc3d4b70bc drm-tip: 2018y-03m-02d-09h-36m-59s UTC integration manifest bd80036a0d46 drm/i915: Kill the remaining CHV HBR2 leftovers
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8208/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Kill the remaining CHV HBR2 leftovers
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: drm/i915: Kill the remaining CHV HBR2 leftovers
URL : https://patchwork.freedesktop.org/series/39260/
State : success
== Summary ==
---- Possible new issues:
Test kms_cursor_crc:
Subgroup cursor-128x128-suspend:
skip -> PASS (shard-snb)---- Known issues:
Test kms_chv_cursor_fail:
Subgroup pipe-b-128x128-right-edge:
pass -> DMESG-WARN (shard-snb) fdo#105185 +4
Test kms_cursor_crc:
Subgroup cursor-64x64-suspend:
pass -> DMESG-WARN (shard-snb) fdo#102365
Test kms_sysfs_edid_timing:
warn -> PASS (shard-apl) fdo#100047fdo#105185 https://bugs.freedesktop.org/show_bug.cgi?id=105185
fdo#102365 https://bugs.freedesktop.org/show_bug.cgi?id=102365
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
shard-apl total:3442 pass:1810 dwarn:1 dfail:0 fail:7 skip:1623 time:12114s shard-hsw total:3366 pass:1727 dwarn:1 dfail:0 fail:1 skip:1636 time:11477s shard-snb total:3463 pass:1358 dwarn:5 dfail:0 fail:1 skip:2099 time:7024s
Blacklisted hosts:
shard-kbl total:3445 pass:1927 dwarn:1 dfail:0 fail:7 skip:1509 time:9675s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8208/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
AFAIK CHV was supposed to have HBR2 originally, but in the end the feature was dropped. We still have some code leftovers from those early days. Eliminate them.
Not much in the spec about HBR2 other than the support for TP3. Since we don't support HBR2 on CHV, removing the unused TPS3 bits looks correct.
Quoted 6 lines
The extra bit for the training pattern seems to be dead in the hardware. I can set it (in fact I can set almost any reserved bit in the registers) but it doesn't seem to interfere with the operation of the hardware. Either that or I'm very lucky that my displays complete link training with the incorrect pattern being sent out.
I don't think I follow this, are you saying there's no need to clear the TPS3 bit? Isn't it better to have the mask include 1 << 14, so that _intel_dp_set_link_train() clears the bit?
Quoted 61 lines
Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 -- drivers/gpu/drm/i915/intel_dp.c | 20 ++++---------------- 2 files changed, 4 insertions(+), 18 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-2@@ -5250,8 +5250,6 @@ enum {#define DP_LINK_TRAIN_OFF (3 << 28)#define DP_LINK_TRAIN_MASK (3 << 28)#define DP_LINK_TRAIN_SHIFT 28 -#define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) -#define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14))/* CPT Link training mode */ #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)drivers/gpu/drm/i915/intel_dp.c +3
-12@@ -92,8 +92,6 @@ static const struct dp_link_dpll chv_dpll[] = { { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, {270000 ,/* m2_int = 27, m2_fraction = 0 */ { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, - {540000 ,/* m2_int = 27, m2_fraction = 0 */ - { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } };/** @@ -2908,10 +2906,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, } }else { -if (IS_CHERRYVIEW (dev_priv)) - *DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else - *DP &= ~DP_LINK_TRAIN_MASK ; + *DP &= ~DP_LINK_TRAIN_MASK ;switch (dp_train_pat &DP_TRAINING_PATTERN_MASK ) {case DP_TRAINING_PATTERN_DISABLE :@@ -2924,12 +2919,8 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, *DP |=DP_LINK_TRAIN_PAT_2 ;break ;case DP_TRAINING_PATTERN_3 : -if (IS_CHERRYVIEW (dev_priv)) { - *DP |=DP_LINK_TRAIN_PAT_3_CHV ; - }else { -DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); - *DP |=DP_LINK_TRAIN_PAT_2 ; - } +DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); + *DP |=DP_LINK_TRAIN_PAT_2 ;break ; } }@@ -3668,10 +3659,7 @@ intel_dp_link_down(struct intel_encoder *encoder,DP &= ~DP_LINK_TRAIN_MASK_CPT ;
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3665
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +1
-4DP |=DP_LINK_TRAIN_PAT_IDLE_CPT ; }else { -if (IS_CHERRYVIEW (dev_priv)) -DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else -DP &= ~DP_LINK_TRAIN_MASK ; +DP &= ~DP_LINK_TRAIN_MASK ;DP |=DP_LINK_TRAIN_PAT_IDLE ; }I915_WRITE (intel_dp->output_reg,DP );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 23 lines · Dhinakaran
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
AFAIK CHV was supposed to have HBR2 originally, but in the end the feature was dropped. We still have some code leftovers from those early days. Eliminate them.
Not much in the spec about HBR2 other than the support for TP3. Since we don't support HBR2 on CHV, removing the unused TPS3 bits looks correct.
Quoted 6 lines
The extra bit for the training pattern seems to be dead in the hardware. I can set it (in fact I can set almost any reserved bit in the registers) but it doesn't seem to interfere with the operation of the hardware. Either that or I'm very lucky that my displays complete link training with the incorrect pattern being sent out.
Quoted 3 lines
I don't think I follow this, are you saying there's no need to clear the TPS3 bit? Isn't it better to have the mask include 1 << 14, so that
_intel_dp_set_link_train()clears the bit?
I'm saying the bit doesn't actually seem to exist in hardware. In fact most of my specs don't list it either. Looks like only the "K0" specs have it.
Quoted 74 lines
Quoted 74 lines
Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 -- drivers/gpu/drm/i915/intel_dp.c | 20 ++++---------------- 2 files changed, 4 insertions(+), 18 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-2@@ -5250,8 +5250,6 @@ enum {#define DP_LINK_TRAIN_OFF (3 << 28)#define DP_LINK_TRAIN_MASK (3 << 28)#define DP_LINK_TRAIN_SHIFT 28 -#define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) -#define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14))/* CPT Link training mode */ #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)drivers/gpu/drm/i915/intel_dp.c +4
-16@@ -92,8 +92,6 @@ static const struct dp_link_dpll chv_dpll[] = { { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, {270000 ,/* m2_int = 27, m2_fraction = 0 */ { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, - {540000 ,/* m2_int = 27, m2_fraction = 0 */ - { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } };/** @@ -2908,10 +2906,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, } }else { -if (IS_CHERRYVIEW (dev_priv)) - *DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else - *DP &= ~DP_LINK_TRAIN_MASK ; + *DP &= ~DP_LINK_TRAIN_MASK ;switch (dp_train_pat &DP_TRAINING_PATTERN_MASK ) {case DP_TRAINING_PATTERN_DISABLE :@@ -2924,12 +2919,8 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, *DP |=DP_LINK_TRAIN_PAT_2 ;break ;case DP_TRAINING_PATTERN_3 : -if (IS_CHERRYVIEW (dev_priv)) { - *DP |=DP_LINK_TRAIN_PAT_3_CHV ; - }else { -DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); - *DP |=DP_LINK_TRAIN_PAT_2 ; - } +DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); + *DP |=DP_LINK_TRAIN_PAT_2 ;break ; } }@@ -3668,10 +3659,7 @@ intel_dp_link_down(struct intel_encoder *encoder,DP &= ~DP_LINK_TRAIN_MASK_CPT ;DP |=DP_LINK_TRAIN_PAT_IDLE_CPT ; }else { -if (IS_CHERRYVIEW (dev_priv)) -DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else -DP &= ~DP_LINK_TRAIN_MASK ; +DP &= ~DP_LINK_TRAIN_MASK ;DP |=DP_LINK_TRAIN_PAT_IDLE ; }I915_WRITE (intel_dp->output_reg,DP );
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Pandiyan, Dhinakaran
Reviewed-byQuoted 24 lines · Ville Syrjälä
Quoted 23 lines · Dhinakaran
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
AFAIK CHV was supposed to have HBR2 originally, but in the end the feature was dropped. We still have some code leftovers from those early days. Eliminate them.
Not much in the spec about HBR2 other than the support for TP3. Since we don't support HBR2 on CHV, removing the unused TPS3 bits looks correct.
Quoted 6 lines
The extra bit for the training pattern seems to be dead in the hardware. I can set it (in fact I can set almost any reserved bit in the registers) but it doesn't seem to interfere with the operation of the hardware. Either that or I'm very lucky that my displays complete link training with the incorrect pattern being sent out.
Quoted 8 lines
Quoted 3 lines
I don't think I follow this, are you saying there's no need to clear the TPS3 bit? Isn't it better to have the mask include 1 << 14, so that
_intel_dp_set_link_train()clears the bit?I'm saying the bit doesn't actually seem to exist in hardware. In fact most of my specs don't list it either. Looks like only the "K0" specs have it.
Thanks for clarifying.
Quoted 66 lines
Quoted 66 lines
Quoted 66 lines
Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 -- drivers/gpu/drm/i915/intel_dp.c | 20 ++++---------------- 2 files changed, 4 insertions(+), 18 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-2@@ -5250,8 +5250,6 @@ enum {#define DP_LINK_TRAIN_OFF (3 << 28)#define DP_LINK_TRAIN_MASK (3 << 28)#define DP_LINK_TRAIN_SHIFT 28 -#define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) -#define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14))/* CPT Link training mode */ #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)drivers/gpu/drm/i915/intel_dp.c +3
-12@@ -92,8 +92,6 @@ static const struct dp_link_dpll chv_dpll[] = { { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, {270000 ,/* m2_int = 27, m2_fraction = 0 */ { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, - {540000 ,/* m2_int = 27, m2_fraction = 0 */ - { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } };/** @@ -2908,10 +2906,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, } }else { -if (IS_CHERRYVIEW (dev_priv)) - *DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else - *DP &= ~DP_LINK_TRAIN_MASK ; + *DP &= ~DP_LINK_TRAIN_MASK ;switch (dp_train_pat &DP_TRAINING_PATTERN_MASK ) {case DP_TRAINING_PATTERN_DISABLE :@@ -2924,12 +2919,8 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp, *DP |=DP_LINK_TRAIN_PAT_2 ;break ;case DP_TRAINING_PATTERN_3 : -if (IS_CHERRYVIEW (dev_priv)) { - *DP |=DP_LINK_TRAIN_PAT_3_CHV ; - }else { -DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); - *DP |=DP_LINK_TRAIN_PAT_2 ; - } +DRM_DEBUG_KMS ("TPS3 not supported, using TPS2 instead\n" ); + *DP |=DP_LINK_TRAIN_PAT_2 ;break ; } }@@ -3668,10 +3659,7 @@ intel_dp_link_down(struct intel_encoder *encoder,DP &= ~DP_LINK_TRAIN_MASK_CPT ;DP |=DP_LINK_TRAIN_PAT_IDLE_CPT ; }else {
Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_link_down(struct intel_encoder *encoder, · line 3665
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c +1
-4-if (IS_CHERRYVIEW (dev_priv)) -DP &= ~DP_LINK_TRAIN_MASK_CHV ; -else -DP &= ~DP_LINK_TRAIN_MASK ; +DP &= ~DP_LINK_TRAIN_MASK ;DP |=DP_LINK_TRAIN_PAT_IDLE ; }I915_WRITE (intel_dp->output_reg,DP );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx