Skip to contentSkip to conversation

Patch "scsi: qla2xxx: Fix memory leak in dual/target mode" has been added to the 4.15-stable tree

PATCH [email protected] 1 participant 1 message Mar 13, 2018

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

scsi: qla2xxx: Fix memory leak in dual/target mode

to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
scsi-qla2xxx-fix-memory-leak-in-dual-target-mode.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 7867b98dceb7741065c9c1b645136facad5c2e93 Mon Sep 17 00:00:00 2001

From: "[email protected]" <[email protected]>
Date: Mon, 4 Dec 2017 14:45:16 -0800
Subject: scsi: qla2xxx: Fix memory leak in dual/target mode

From: [email protected] <[email protected]>

commit 7867b98dceb7741065c9c1b645136facad5c2e93 upstream.

When driver is loaded in Target/Dual mode, it creates QPair to support MQ and allocates resources for each QPair. This Qpair initialization is delayed until the FW personality is changed to Dual/Target mode by issuing chip reset. At the time of chip reset firmware is re-initilized in correct personality all the QPairs are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh).

This patch fixes memory leak by adding check to issue MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the flag is set for initiator mode, and clean up QPair resources correctly during the driver unload. This MBX does not need to be issued for Target/Dual mode because chip reset will reset ISP.

Fixes d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs")
Cc <[email protected]> # 4.10+
---
 drivers/scsi/qla2xxx/qla_init.c |    4 +---
 drivers/scsi/qla2xxx/qla_mid.c  |   18 ++++++++++--------
 2 files changed, 11 insertions(+), 11 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +1 -3
@@ -8221,9 +8221,6 @@ int qla2xxx_delete_qpair(struct scsi_qla
 	int ret = QLA_FUNCTION_FAILED;
 	struct qla_hw_data *ha = qpair->hw;
 
-	if (!vha->flags.qpairs_req_created && !vha->flags.qpairs_rsp_created)
-		goto fail;
-
 	qpair->delete_in_progress = 1;
 	while (atomic_read(&qpair->ref_count))
 		msleep(500);
@@ -8231,6 +8228,7 @@ int qla2xxx_delete_qpair(struct scsi_qla
 	ret = qla25xx_delete_req_que(vha, qpair->req);
 	if (ret != QLA_SUCCESS)
 		goto fail;
+
 	ret = qla25xx_delete_rsp_que(vha, qpair->rsp);
 	if (ret != QLA_SUCCESS)
 		goto fail;
drivers/scsi/qla2xxx/qla_mid.c +10 -8
@@ -575,14 +575,15 @@ qla25xx_free_rsp_que(struct scsi_qla_hos
 int
 qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
 {
-	int ret = -1;
+	int ret = QLA_SUCCESS;
 
-	if (req) {
+	if (req && vha->flags.qpairs_req_created) {
 		req->options |= BIT_0;
 		ret = qla25xx_init_req_que(vha, req);
+		if (ret != QLA_SUCCESS)
+			return QLA_FUNCTION_FAILED;
 	}
-	if (ret == QLA_SUCCESS)
-		qla25xx_free_req_que(vha, req);
+	qla25xx_free_req_que(vha, req);
 
 	return ret;
 }
@@ -590,14 +591,15 @@ qla25xx_delete_req_que(struct scsi_qla_h
 int
 qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 {
-	int ret = -1;
+	int ret = QLA_SUCCESS;
 
-	if (rsp) {
+	if (rsp && vha->flags.qpairs_rsp_created) {
 		rsp->options |= BIT_0;
 		ret = qla25xx_init_rsp_que(vha, rsp);
+		if (ret != QLA_SUCCESS)
+			return QLA_FUNCTION_FAILED;
 	}
-	if (ret == QLA_SUCCESS)
-		qla25xx_free_rsp_que(vha, rsp);
+	qla25xx_free_rsp_que(vha, rsp);
 
 	return ret;
 }

Patches currently in stable-queue which might be from [email protected] are

queue-4.15/scsi-qla2xxx-fix-null-pointer-crash-due-to-active-timer-for-abts.patch queue-4.15/scsi-qla2xxx-retry-switch-command-on-time-out.patch queue-4.15/scsi-qla2xxx-relogin-to-target-port-on-a-cable-swap.patch queue-4.15/scsi-qla2xxx-fix-abort-command-deadlock-due-to-spinlock.patch queue-4.15/scsi-qla2xxx-fix-re-login-for-nport-handle-in-use.patch queue-4.15/scsi-qla2xxx-fix-login-state-machine-stuck-at-gpdb.patch queue-4.15/scsi-qla2xxx-fix-system-crash-for-notify-ack-timeout-handling.patch queue-4.15/scsi-qla2xxx-replace-fcport-alloc-with-qla2x00_alloc_fcport.patch queue-4.15/scsi-qla2xxx-clear-loop-id-after-delete.patch queue-4.15/scsi-qla2xxx-defer-processing-of-gs-iocb-calls.patch queue-4.15/scsi-qla2xxx-remove-aborting-els-iocb-call-issued-as-part-of-timeout.patch queue-4.15/scsi-qla2xxx-fix-memory-leak-in-dual-target-mode.patch queue-4.15/scsi-qla2xxx-fix-npiv-host-cleanup-in-target-mode.patch queue-4.15/scsi-qla2xxx-fix-relogin-being-triggered-too-fast.patch queue-4.15/scsi-qla2xxx-skip-irq-affinity-for-target-qpairs.patch queue-4.15/scsi-qla2xxx-fix-scan-state-field-for-fcport.patch queue-4.15/scsi-qla2xxx-fix-prli-state-check.patch queue-4.15/scsi-qla2xxx-fix-recursion-while-sending-terminate-exchange.patch queue-4.15/scsi-qla2xxx-fix-null-pointer-crash-due-to-probe-failure.patch queue-4.15/scsi-qla2xxx-fix-system-crash-in-qlt_plogi_ack_unref.patch queue-4.15/scsi-qla2xxx-serialize-gpnid-for-multiple-rscn.patch queue-4.15/scsi-qla2xxx-fix-gpnid-error-processing.patch queue-4.15/scsi-qla2xxx-move-session-delete-to-driver-work-queue.patch