drm/i915: drop various VLAs in i915_debugfs.c
Subsystems (2)
PATCH 1/1 drm/i915: drop various VLAs in i915_debugfs.c
Avoid 3 VLAs[1] by using real constant expressions instead of variables. The compiler should be able to optimize the original code and avoid using any actual VLAs. Anyway this change is useful because it will avoid a false positives with -Wvla, it might also help the compiler generating better code.
[1] https://lkml.org/lkml/2018/3/7/621
--- drivers/gpu/drm/i915/i915_debugfs.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +16 -10
@@ -4259,19 +4259,20 @@ static ssize_t cur_wm_latency_write(struct file *file, const char __user *ubuf, i915_cache_sharing_get, i915_cache_sharing_set, "%llu\n"); +#define CHERRYVIEW_SS_MAX 2 +static void cherryview_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) { -int ss_max =2 ;int ss; -u32 sig1[ss_max], sig2[ss_max]; +u32 sig1[CHERRYVIEW_SS_MAX ], sig2[CHERRYVIEW_SS_MAX ]; sig1[0 ] =I915_READ (CHV_POWER_SS0_SIG1 ); sig1[1 ] =I915_READ (CHV_POWER_SS1_SIG1 ); sig2[0 ] =I915_READ (CHV_POWER_SS0_SIG2 ); sig2[1 ] =I915_READ (CHV_POWER_SS1_SIG2 ); -for (ss =0 ; ss < ss_max; ss++) { +for (ss =0 ; ss <CHERRYVIEW_SS_MAX ; ss++) {unsigned int eu_cnt;if (sig1[ss] &CHV_SS_PG_ENABLE )
@@ -4290,15 +4291,17 @@ static void cherryview_sseu_device_status(struct drm_i915_private *dev_priv, } } +#define GEN10_S_MAX 6 +#define GEN10_SS_MAX 4 +static void gen10_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) {const struct intel_device_info *info =INTEL_INFO (dev_priv); -int s_max =6 , ss_max =4 ;int s, ss; -u32 s_reg[s_max], eu_reg[2 * s_max], eu_mask[2 ]; +u32 s_reg[GEN10_S_MAX ], eu_reg[2 *GEN10_S_MAX ], eu_mask[2 ]; -for (s =0 ; s < s_max; s++) { +for (s =0 ; s <GEN10_S_MAX ; s++) {/* * FIXME: Valid SS Mask respects the spec and read * only valid bits for those registers, excluding reserverd
@@ -4320,7 +4323,7 @@ static void gen10_sseu_device_status(struct drm_i915_private *dev_priv,GEN9_PGCTL_SSB_EU210_ACK |GEN9_PGCTL_SSB_EU311_ACK ; -for (s =0 ; s < s_max; s++) { +for (s =0 ; s <GEN10_S_MAX ; s++) {if ((s_reg[s] &GEN9_PGCTL_SLICE_ACK ) ==0 )/* skip disabled slice */ continue ;
@@ -4328,7 +4331,7 @@ static void gen10_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s); sseu->subslice_mask = info->sseu.subslice_mask; -for (ss =0 ; ss < ss_max; ss++) { +for (ss =0 ; ss <GEN10_SS_MAX ; ss++) {unsigned int eu_cnt;if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss))))
@@ -4345,12 +4348,15 @@ static void gen10_sseu_device_status(struct drm_i915_private *dev_priv, } } +#define GEN9_S_MAX 3 +#define GEN9_SS_MAX 4 +static void gen9_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) { -int s_max =3 , ss_max =4 ; +int s_max =GEN9_S_MAX , ss_max =GEN9_SS_MAX ;int s, ss; -u32 s_reg[s_max], eu_reg[2 *s_max], eu_mask[2 ]; +u32 s_reg[GEN9_S_MAX ], eu_reg[2 *GEN9_S_MAX ], eu_mask[2 ];/* BXT has a single slice and at most 3 subslices. */ if (IS_GEN9_LP (dev_priv)) {
Signature · 1 line
1.9.1
Jani Nikula
maintainerQuoted 5 lines · Salvatore Mesoraca
Avoid 3 VLAs[1] by using real constant expressions instead of variables. The compiler should be able to optimize the original code and avoid using any actual VLAs. Anyway this change is useful because it will avoid a false positives with -Wvla, it might also help the compiler generating better code.
Thanks for your patch. However, Chris beat you to it with:
7aa0b14ede64 ("drm/i915: Remove variable length arrays from sseu debugfs printers")
as well as adding -Wvla to our subdir-ccflags-y to prevent more from cropping up:
c5c2b11894f4 ("drm/i915: Warn against variable length arrays")
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
2018-03-14 13:17 GMT+01:00 Jani Nikula <[email protected]>:
Quoted 4 lines
Thanks for your patch. However, Chris beat you to it with:
7aa0b14ede64("drm/i915: Remove variable length arrays from sseu debugfs printers")
I didn't notice it :)
Quoted 4 lines
as well as adding -Wvla to our subdir-ccflags-y to prevent more from cropping up:
c5c2b11894f4("drm/i915: Warn against variable length arrays")
Great!
Best regards,
Salvatore
Joonas Lahtinen
maintainerQuoting Salvatore Mesoraca (2018-03-13 21:51:28)
Quoted 18 lines
Avoid 3 VLAs[1] by using real constant expressions instead of variables. The compiler should be able to optimize the original code and avoid using any actual VLAs. Anyway this change is useful because it will avoid a false positives with -Wvla, it might also help the compiler generating better code.
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by Salvatore Mesoraca <[email protected]>--- drivers/gpu/drm/i915/i915_debugfs.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)drivers/gpu/drm/i915/i915_debugfs.c +0
-0
drivers/gpu/drm/i915/i915_debugfs.c static ssize_t cur_wm_latency_write(struct file *file, const char __user *ubuf, · line 4262
Quoted 4 lines
drivers/gpu/drm/i915/i915_debugfs.c +1
-0@@ -4259,19 +4259,20 @@ static ssize_t cur_wm_latency_write(struct file *file, const char __user *ubuf, i915_cache_sharing_get, i915_cache_sharing_set, "%llu\n"); +#define CHERRYVIEW_SS_MAX 2
CHV_SS_MAX should be good enough. Make these function scoped (so #define at the beginning and #undef at the end of function).
Do use ARRAY_SIZE() instead of repeating.
Regards, Joonas
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
2018-03-14 13:27 GMT+01:00 Joonas Lahtinen <[email protected]>:
Quoted 4 lines
CHV_SS_MAXshould be good enough. Make these function scoped (so #define at the beginning and #undef at the end of function).Do use
ARRAY_SIZE()instead of repeating.
Thank you very much for your suggestions.
Unfortunately, it seems that someone else already fixed this issue, so I'll just drop this patch.
Best regards,
Salvatore
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: drop various VLAs in i915_debugfs.c
In reply to Salvatore Mesoraca== Series Details ==
== Series Details ==
Series: drm/i915: drop various VLAs in i915_debugfs.c
URL : https://patchwork.freedesktop.org/series/39985/
State : failure
== Summary ==
Applying: drm/i915: drop various VLAs in i915_debugfs.c
error: Failed to merge in the changes.
Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/i915_debugfs.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/i915_debugfs.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_debugfs.c Patch failed at 0001 drm/i915: drop various VLAs in i915_debugfs.c The copy of the patch that failed is found in: .git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx