Skip to contentSkip to conversation

patch "parport_pc: Add support for WCH CH382L PCI-E single parallel port" added to char-misc-testing

PATCH [email protected] 1 participant 1 message Mar 14, 2018

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

parport_pc: Add support for WCH CH382L PCI-E single parallel port

to my char-misc git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-testing branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will be merged to the char-misc-next branch sometime soon, after it passes testing, and the merge window is open.

If you have any questions about this process, please let me know.

Quoted 1 line

From 823f7923833c6cc2b16e601546d607dcfb368004 Mon Sep 17 00:00:00 2001

From: Alexander Gerasiov <[email protected]>
Date: Sun, 4 Feb 2018 02:50:22 +0300
Subject: parport_pc: Add support for WCH CH382L PCI-E single parallel port
card.

WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])

---
 drivers/parport/parport_pc.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/parport/parport_pc.c +4 -0
index 489492b608cf..380916bff9e0 100644
@@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards {
 	netmos_9901,
 	netmos_9865,
 	quatech_sppxp100,
+	wch_ch382l,
 };
 
 
@@ -2708,6 +2709,7 @@ static struct parport_pc_pci {
 	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
+	/* wch_ch382l */		{ 1, { { 2, -1 }, } },
 };
 
 static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2797,6 +2799,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+	/* WCH CH382L PCI-E single parallel port card */
+	{ 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
 	{ 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
Signature · 1 line
2.16.2