Skip to contentSkip to conversation

ARM: dts: imx6-phytec: Use the standard 'stdout-path' property

PATCH New Fabio Estevam 1 participant 2 messages Mar 15, 2018

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/2 ARM: dts: imx6-phytec: Use the standard 'stdout-path' property

From: Fabio Estevam <[email protected]>

Use the standard 'stdout-path' property to fix the following DTC warnings:

arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead

---
 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 2 +-
 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts  | 2 +-
 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts  | 2 +-
 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts +1 -1
index a8adcb2..9f7f9f9 100644
@@ -15,7 +15,7 @@
 		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
 
 	chosen {
-		linux,stdout-path = &uart2;
+		stdout-path = &uart2;
 	};
 };
 
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts +1 -1
index 8fdce3c..2e70ea5 100644
@@ -15,7 +15,7 @@
 		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
 
 	chosen {
-		linux,stdout-path = &uart2;
+		stdout-path = &uart2;
 	};
 };
 
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts +1 -1
index 8afa5ce..65d2e48 100644
@@ -15,7 +15,7 @@
 		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
 
 	chosen {
-		linux,stdout-path = &uart2;
+		stdout-path = &uart2;
 	};
 };
 
arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts +1 -1
index 3618e53..f27d7ab 100644
@@ -15,7 +15,7 @@
 		     "phytec,imx6qdl-pcm058", "fsl,imx6qp";
 
 	chosen {
-		linux,stdout-path = &uart2;
+		stdout-path = &uart2;
 	};
 };
 
Signature · 1 line
2.7.4
author reviewer
#1 lore raw

PATCH 2/2 ARM: dts: imx6ul-isiot: Pass the required '#sound-dai-cells'

From: Fabio Estevam <[email protected]>

DTC now warns about missing #sound-dai-cells:

/sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /soc/aips-bus at 2100000/i2c at 21a0000/codec at a or bad phandle (referred from sound-dai[0])

Pass the required '#sound-dai-cells' property to fix it.

---
 arch/arm/boot/dts/imx6ul-isiot.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx6ul-isiot.dtsi +1 -0
index b0ecebb..921e12c 100644
@@ -142,6 +142,7 @@
 	sgtl5000: codec at a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6UL_CLK_OSC>;
 		clock-names = "mclk";
 		VDDA-supply = <&reg_3p3v>;
Signature · 1 line
2.7.4