Skip to contentSkip to conversation

usb: host: xhci-rcar: add support for r8a77965

PATCH New Mathias Nyman 1 participant 1 message Mar 16, 2018

Subsystems (4)
Device tree bindings USB Arm/RISC-V/Renesas architecture USB xHCI driver
lore
Share & tools
lore

Mathias Nyman

author
#0 lore raw

PATCH 8/9 usb: host: xhci-rcar: add support for r8a77965

From: Yoshihiro Shimoda <[email protected]>

This patch adds support for r8a77965 (R-Car M3-N).

Signed-off-by Yoshihiro Shimoda <[email protected]>
Reviewed-by Rob Herring <[email protected]>
Signed-off-by Mathias Nyman <[email protected]>
---
 Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
 drivers/usb/host/xhci-rcar.c                       | 4 ++++
 2 files changed, 5 insertions(+)
Documentation/devicetree/bindings/usb/usb-xhci.txt +1 -0
index e2ea59b..1651483a 100644
@@ -13,6 +13,7 @@ Required properties:
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
     - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
       device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
drivers/usb/host/xhci-rcar.c +4 -0
index f0b5596..f33ffc2 100644
@@ -83,6 +83,10 @@ static const struct soc_device_attribute rcar_quirks_match[]  = {
 		.soc_id = "r8a7796",
 		.data = (void *)RCAR_XHCI_FIRMWARE_V3,
 	},
+	{
+		.soc_id = "r8a77965",
+		.data = (void *)RCAR_XHCI_FIRMWARE_V3,
+	},
 	{ /* sentinel */ },
 };