Skip to contentSkip to conversation

Patch "ACPI / PMIC: xpower: Fix power_table addresses" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Mar 22, 2018

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

ACPI / PMIC: xpower: Fix power_table addresses

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
acpi-pmic-xpower-fix-power_table-addresses.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Thu Mar 22 14:57:32 CET 2018

From: Hans de Goede <[email protected]>
Date: Fri, 21 Apr 2017 13:48:08 +0200
Subject: ACPI / PMIC: xpower: Fix power_table addresses

From: Hans de Goede <[email protected]>

[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]

The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet.

---
 drivers/acpi/pmic/intel_pmic_xpower.c |   50 +++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 25 deletions(-)
drivers/acpi/pmic/intel_pmic_xpower.c +25 -25
@@ -28,97 +28,97 @@ static struct pmic_table power_table[] =
 		.address = 0x00,
 		.reg = 0x13,
 		.bit = 0x05,
-	},
+	}, /* ALD1 */
 	{
 		.address = 0x04,
 		.reg = 0x13,
 		.bit = 0x06,
-	},
+	}, /* ALD2 */
 	{
 		.address = 0x08,
 		.reg = 0x13,
 		.bit = 0x07,
-	},
+	}, /* ALD3 */
 	{
 		.address = 0x0c,
 		.reg = 0x12,
 		.bit = 0x03,
-	},
+	}, /* DLD1 */
 	{
 		.address = 0x10,
 		.reg = 0x12,
 		.bit = 0x04,
-	},
+	}, /* DLD2 */
 	{
 		.address = 0x14,
 		.reg = 0x12,
 		.bit = 0x05,
-	},
+	}, /* DLD3 */
 	{
 		.address = 0x18,
 		.reg = 0x12,
 		.bit = 0x06,
-	},
+	}, /* DLD4 */
 	{
 		.address = 0x1c,
 		.reg = 0x12,
 		.bit = 0x00,
-	},
+	}, /* ELD1 */
 	{
 		.address = 0x20,
 		.reg = 0x12,
 		.bit = 0x01,
-	},
+	}, /* ELD2 */
 	{
 		.address = 0x24,
 		.reg = 0x12,
 		.bit = 0x02,
-	},
+	}, /* ELD3 */
 	{
 		.address = 0x28,
 		.reg = 0x13,
 		.bit = 0x02,
-	},
+	}, /* FLD1 */
 	{
 		.address = 0x2c,
 		.reg = 0x13,
 		.bit = 0x03,
-	},
+	}, /* FLD2 */
 	{
 		.address = 0x30,
 		.reg = 0x13,
 		.bit = 0x04,
-	},
+	}, /* FLD3 */
 	{
-		.address = 0x38,
+		.address = 0x34,
 		.reg = 0x10,
 		.bit = 0x03,
-	},
+	}, /* BUC1 */
 	{
-		.address = 0x3c,
+		.address = 0x38,
 		.reg = 0x10,
 		.bit = 0x06,
-	},
+	}, /* BUC2 */
 	{
-		.address = 0x40,
+		.address = 0x3c,
 		.reg = 0x10,
 		.bit = 0x05,
-	},
+	}, /* BUC3 */
 	{
-		.address = 0x44,
+		.address = 0x40,
 		.reg = 0x10,
 		.bit = 0x04,
-	},
+	}, /* BUC4 */
 	{
-		.address = 0x48,
+		.address = 0x44,
 		.reg = 0x10,
 		.bit = 0x01,
-	},
+	}, /* BUC5 */
 	{
-		.address = 0x4c,
+		.address = 0x48,
 		.reg = 0x10,
 		.bit = 0x00
-	},
+	}, /* BUC6 */
 };
 
 /* TMP0 - TMP5 are the same, all from GPADC */

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/acpi-pmic-xpower-fix-power_table-addresses.patch queue-4.4/rtc-cmos-do-not-assume-irq-8-for-rtc-when-there-are-no-legacy-irqs.patch queue-4.4/genirq-use-irqd_get_trigger_type-to-compare-the-trigger-type-for-shared-irqs.patch queue-4.4/x86-i8259-export-legacy_pic-symbol.patch