mfd: dt-bindings: Add rk808 PMIC reset property
Subsystems (2)
PATCH v2 1/1 mfd: dt-bindings: Add rk808 PMIC reset property
Add documentation about a new rk808 devicetree property. This can enable the rk805/rk808/rk818 PMIC reset, instead of using soft resets from the Control and Reset Module.
---
Changes:
v2: Changed commit message
Documentation/devicetree/bindings/mfd/rk808.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/mfd/rk808.txt +2 -0
@@ -20,6 +20,8 @@ Optional properties: default output clock name - rockchip,system-power-controller: Telling whether or not this pmic is controlling the system power. +- rockchip,system-reset-controller: Telling whether or not this pmic is controlling + the system reset. Optional RK805 properties: - vcc1-supply: The input supply for DCDC_REG1
Signature · 1 line
2.7.4
Quoted 11 lines · Daniel Schultz
Add documentation about a new rk808 devicetree property. This can enable the rk805/rk808/rk818 PMIC reset, instead of using soft resets from the Control and Reset Module.
Signed-off-by Daniel Schultz <[email protected]>---
Changes:
v2: Changed commit messageDocumentation/devicetree/bindings/mfd/rk808.txt | 2 ++ 1 file changed, 2 insertions(+)
Hi Daniel,
Am Donnerstag, 29. März 2018, 16:44:43 CEST schrieb Daniel Schultz:
Quoted 5 lines
Add documentation about a new rk808 devicetree property. This can enable the rk805/rk808/rk818 PMIC reset, instead of using soft resets from the Control and Reset Module.
Signed-off-by Daniel Schultz <[email protected]>
Is this patch still current?
Normally they go through the relevant subsystem tree but I don't see Lee Jones <[email protected]> in the list of recipients.
So you might want to resend with him (and Rob's Ack) added?
Heiko