YCBCR 4:2:0/4:4:4 output support for LSPCON
Subsystems (2)
v7 cover YCBCR 4:2:0/4:4:4 output support for LSPCON
This patch series adds YCBCR 4:2:0 output support for LSPCON displays. In order to indicate the color format of output, to the LSPCON device, a source has to set and send proper AVI infoframes to LSPCON. So this patch series:
- introduces concept of CRTC output format.
- adds AVI infoframes support for LSPCON.
- then adds YCBCR 4:2:0 and 4:4:4 output support for LSPCON.
Previous versions of this series and its review can be found here:
https://patchwork.freedesktop.org/series/28536/
https://patchwork.freedesktop.org/series/33794/
- In order to address review comment from V2, I have added 2 new patches in this series, hence sent V3, and then V4 and to address additional comments.
- V5 of the series adds a new patch (first patch) just to introduce CRTC_OUTPUT_FORMAT concept, and later adds patches for 4:2:0 and 4:4:4 outputs.
- V6 fixes a warning in CI builds, related to state->get_config().
- V7 fixes alignment warnings from checkpatch.
Sharma, Shashank (2):
drm/i915: Check LSPCON vendor OUI
drm/i915: Write AVI infoframes for MCA LSPCON
Shashank Sharma (6):
drm/i915: Introduce CRTC output format drm/i915: Add CRTC output format YCBCR 4:2:0 drm/i915: Add CRTC output format YCBCR 4:4:4 drm/i915: Add AVI infoframe support for LSPCON drm/i915: Write AVI infoframes for Parade LSPCON drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
drivers/gpu/drm/i915/i915_reg.h | 2 + drivers/gpu/drm/i915/intel_color.c | 3 +- drivers/gpu/drm/i915/intel_crt.c | 3 + drivers/gpu/drm/i915/intel_ddi.c | 28 ++- drivers/gpu/drm/i915/intel_display.c | 104 ++++++++--- drivers/gpu/drm/i915/intel_dp.c | 5 + drivers/gpu/drm/i915/intel_dp_mst.c | 1 + drivers/gpu/drm/i915/intel_drv.h | 39 +++- drivers/gpu/drm/i915/intel_dsi.c | 1 + drivers/gpu/drm/i915/intel_dvo.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 24 ++- drivers/gpu/drm/i915/intel_lspcon.c | 338 +++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_lvds.c | 2 + drivers/gpu/drm/i915/intel_panel.c | 2 +- drivers/gpu/drm/i915/intel_sdvo.c | 1 + drivers/gpu/drm/i915/intel_tv.c | 1 + 16 files changed, 497 insertions(+), 58 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 1/8 drm/i915: Introduce CRTC output format
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations.
V5:
- Created this separate patch to introduce and init output_format.
- Initialize parameters of output_format_str respectively (Jani N).
- Call it intel_output_format than crtc_output_format(Ville).
- Set output format in pipe_config for every encoder (Ville).
- Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)
V6: Rebase
V7: Fixed alignment warnings (checkpatch)
--- drivers/gpu/drm/i915/intel_crt.c | 3 +++ drivers/gpu/drm/i915/intel_display.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 1 + drivers/gpu/drm/i915/intel_dp_mst.c | 1 + drivers/gpu/drm/i915/intel_drv.h | 8 ++++++++ drivers/gpu/drm/i915/intel_dsi.c | 1 + drivers/gpu/drm/i915/intel_dvo.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lvds.c | 2 ++ drivers/gpu/drm/i915/intel_sdvo.c | 1 + drivers/gpu/drm/i915/intel_tv.c | 1 + 11 files changed, 37 insertions(+)
drivers/gpu/drm/i915/intel_crt.c +3 -0
@@ -337,6 +337,7 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { + pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;return true; }
@@ -345,6 +346,7 @@ static bool pch_crt_compute_config(struct intel_encoder *encoder, struct drm_connector_state *conn_state) { pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;return true; }
@@ -356,6 +358,7 @@ static bool hsw_crt_compute_config(struct intel_encoder *encoder,struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;/* LPT FDI RX only supports 8bpc. */ if (HAS_PCH_LPT (dev_priv)) {
drivers/gpu/drm/i915/intel_display.c +17 -0
@@ -9324,6 +9324,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, } } + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; power_domain =POWER_DOMAIN_PIPE_PANEL_FITTER (crtc->pipe);if (intel_display_power_get_if_enabled (dev_priv, power_domain)) { power_domain_mask |=BIT_ULL (power_domain);
@@ -10652,6 +10653,18 @@ static void snprintf_output_types(char *buf, size_t len,WARN_ON_ONCE (output_types !=0 ); } +static const char *const output_format_str[] = { + [INTEL_OUTPUT_FORMAT_INVALID ] ="Invalid" , + [INTEL_OUTPUT_FORMAT_RGB ] ="RGB" , +}; + +static const char *output_formats (enum intel_output_format format) +{ +if (format !=INTEL_OUTPUT_FORMAT_RGB ) + format =INTEL_OUTPUT_FORMAT_INVALID ; +return output_format_str[format]; +} +static void intel_dump_pipe_config (struct intel_crtc *crtc,struct intel_crtc_state *pipe_config,const char *context)
@@ -10671,6 +10684,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,DRM_DEBUG_KMS ("output_types: %s (0x%x)\n" , buf, pipe_config->output_types); +DRM_DEBUG_KMS ("output format: %s\n" , +output_formats (pipe_config->output_format)); +DRM_DEBUG_KMS ("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n" ,transcoder_name (pipe_config->cpu_transcoder), pipe_config->pipe_bpp, pipe_config->dither);
@@ -11250,6 +11266,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,PIPE_CONF_CHECK_I (base.adjusted_mode.crtc_vsync_end);PIPE_CONF_CHECK_I (pixel_multiplier); +PIPE_CONF_CHECK_I (output_format);PIPE_CONF_CHECK_BOOL (has_hdmi_sink);if ((INTEL_GEN (dev_priv) <8 && !IS_HASWELL (dev_priv)) ||IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv))
drivers/gpu/drm/i915/intel_dp.c +1 -0
@@ -1722,6 +1722,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,if (HAS_PCH_SPLIT (dev_priv) && !HAS_DDI (dev_priv) && port !=PORT_A ) pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_drrs = false;if (IS_G4X (dev_priv) || port ==PORT_A ) pipe_config->has_audio = false;
drivers/gpu/drm/i915/intel_dp_mst.c +1 -0
@@ -48,6 +48,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,bool reduce_m_n =drm_dp_has_quirk (&intel_dp->desc,DP_DPCD_QUIRK_LIMITED_M_N ); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_pch_encoder = false; bpp =24 ;if (intel_dp->compliance.test_data.bpc) {
drivers/gpu/drm/i915/intel_drv.h +8 -0
@@ -699,6 +699,11 @@ struct intel_crtc_wm_state {bool need_postvbl_update; }; +enum intel_output_format { +INTEL_OUTPUT_FORMAT_INVALID , +INTEL_OUTPUT_FORMAT_RGB , +}; +struct intel_crtc_state {struct drm_crtc_state base;
@@ -887,6 +892,9 @@ struct intel_crtc_state {/* output format is YCBCR 4:2:0 */ bool ycbcr420; + +/* Output format RGB/YCBCR etc */ +enum intel_output_format output_format; };struct intel_crtc {
drivers/gpu/drm/i915/intel_dsi.c +1 -0
@@ -314,6 +314,7 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,int ret;DRM_DEBUG_KMS ("\n" ); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;if (fixed_mode) {intel_fixed_panel_mode (fixed_mode, adjusted_mode);
drivers/gpu/drm/i915/intel_dvo.c +1 -0
@@ -254,6 +254,7 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder,if (fixed_mode)intel_fixed_panel_mode (fixed_mode, adjusted_mode); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;return true; }
drivers/gpu/drm/i915/intel_hdmi.c +1 -0
@@ -1677,6 +1677,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,int desired_bpp;bool force_dvi = intel_conn_state->force_audio ==HDMI_AUDIO_OFF_DVI ; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;if (pipe_config->has_hdmi_sink)
drivers/gpu/drm/i915/intel_lvds.c +2 -0
@@ -419,6 +419,8 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, pipe_config->pipe_bpp = lvds_bpp; } + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; +/* * We have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode,
drivers/gpu/drm/i915/intel_sdvo.c +1 -0
@@ -1132,6 +1132,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,DRM_DEBUG_KMS ("forcing bpc to 8 for SDVO\n" ); pipe_config->pipe_bpp =8 *3 ; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;if (HAS_PCH_SPLIT (to_i915 (encoder->base.dev))) pipe_config->has_pch_encoder = true;
drivers/gpu/drm/i915/intel_tv.c +1 -0
@@ -881,6 +881,7 @@ intel_tv_compute_config(struct intel_encoder *encoder,if (!tv_mode)return false; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->base.adjusted_mode.crtc_clock = tv_mode->clock;DRM_DEBUG_KMS ("forcing bpc to 8 for TV\n" ); pipe_config->pipe_bpp =8 *3 ;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 1/8 drm/i915: Introduce CRTC output format
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations.
V5:
- Created this separate patch to introduce and init output_format.
- Initialize parameters of output_format_str respectively (Jani N).
- Call it intel_output_format than crtc_output_format(Ville).
- Set output format in pipe_config for every encoder (Ville).
- Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)
V6: Rebase
V7: Fixed alignment warnings (checkpatch)
V8: Another check[atch warning for alignment
--- drivers/gpu/drm/i915/intel_crt.c | 3 +++ drivers/gpu/drm/i915/intel_display.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 1 + drivers/gpu/drm/i915/intel_dp_mst.c | 1 + drivers/gpu/drm/i915/intel_drv.h | 8 ++++++++ drivers/gpu/drm/i915/intel_dsi.c | 1 + drivers/gpu/drm/i915/intel_dvo.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lvds.c | 2 ++ drivers/gpu/drm/i915/intel_sdvo.c | 1 + drivers/gpu/drm/i915/intel_tv.c | 1 + 11 files changed, 37 insertions(+)
drivers/gpu/drm/i915/intel_crt.c +3 -0
@@ -337,6 +337,7 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { + pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;return true; }
@@ -345,6 +346,7 @@ static bool pch_crt_compute_config(struct intel_encoder *encoder, struct drm_connector_state *conn_state) { pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;return true; }
@@ -356,6 +358,7 @@ static bool hsw_crt_compute_config(struct intel_encoder *encoder,struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;/* LPT FDI RX only supports 8bpc. */ if (HAS_PCH_LPT (dev_priv)) {
drivers/gpu/drm/i915/intel_display.c +17 -0
@@ -9324,6 +9324,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, } } + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; power_domain =POWER_DOMAIN_PIPE_PANEL_FITTER (crtc->pipe);if (intel_display_power_get_if_enabled (dev_priv, power_domain)) { power_domain_mask |=BIT_ULL (power_domain);
@@ -10652,6 +10653,18 @@ static void snprintf_output_types(char *buf, size_t len,WARN_ON_ONCE (output_types !=0 ); } +static const char *const output_format_str[] = { + [INTEL_OUTPUT_FORMAT_INVALID ] ="Invalid" , + [INTEL_OUTPUT_FORMAT_RGB ] ="RGB" , +}; + +static const char *output_formats (enum intel_output_format format) +{ +if (format !=INTEL_OUTPUT_FORMAT_RGB ) + format =INTEL_OUTPUT_FORMAT_INVALID ; +return output_format_str[format]; +} +static void intel_dump_pipe_config (struct intel_crtc *crtc,struct intel_crtc_state *pipe_config,const char *context)
@@ -10671,6 +10684,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,DRM_DEBUG_KMS ("output_types: %s (0x%x)\n" , buf, pipe_config->output_types); +DRM_DEBUG_KMS ("output format: %s\n" , +output_formats (pipe_config->output_format)); +DRM_DEBUG_KMS ("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n" ,transcoder_name (pipe_config->cpu_transcoder), pipe_config->pipe_bpp, pipe_config->dither);
@@ -11250,6 +11266,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,PIPE_CONF_CHECK_I (base.adjusted_mode.crtc_vsync_end);PIPE_CONF_CHECK_I (pixel_multiplier); +PIPE_CONF_CHECK_I (output_format);PIPE_CONF_CHECK_BOOL (has_hdmi_sink);if ((INTEL_GEN (dev_priv) <8 && !IS_HASWELL (dev_priv)) ||IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv))
drivers/gpu/drm/i915/intel_dp.c +1 -0
@@ -1722,6 +1722,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,if (HAS_PCH_SPLIT (dev_priv) && !HAS_DDI (dev_priv) && port !=PORT_A ) pipe_config->has_pch_encoder = true; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_drrs = false;if (IS_G4X (dev_priv) || port ==PORT_A ) pipe_config->has_audio = false;
drivers/gpu/drm/i915/intel_dp_mst.c +1 -0
@@ -48,6 +48,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,bool reduce_m_n =drm_dp_has_quirk (&intel_dp->desc,DP_DPCD_QUIRK_LIMITED_M_N ); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_pch_encoder = false; bpp =24 ;if (intel_dp->compliance.test_data.bpc) {
drivers/gpu/drm/i915/intel_drv.h +8 -0
@@ -699,6 +699,11 @@ struct intel_crtc_wm_state {bool need_postvbl_update; }; +enum intel_output_format { +INTEL_OUTPUT_FORMAT_INVALID , +INTEL_OUTPUT_FORMAT_RGB , +}; +struct intel_crtc_state {struct drm_crtc_state base;
@@ -887,6 +892,9 @@ struct intel_crtc_state {/* output format is YCBCR 4:2:0 */ bool ycbcr420; + +/* Output format RGB/YCBCR etc */ +enum intel_output_format output_format; };struct intel_crtc {
drivers/gpu/drm/i915/intel_dsi.c +1 -0
@@ -314,6 +314,7 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,int ret;DRM_DEBUG_KMS ("\n" ); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;if (fixed_mode) {intel_fixed_panel_mode (fixed_mode, adjusted_mode);
drivers/gpu/drm/i915/intel_dvo.c +1 -0
@@ -254,6 +254,7 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder,if (fixed_mode)intel_fixed_panel_mode (fixed_mode, adjusted_mode); + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;return true; }
drivers/gpu/drm/i915/intel_hdmi.c +1 -0
@@ -1677,6 +1677,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,int desired_bpp;bool force_dvi = intel_conn_state->force_audio ==HDMI_AUDIO_OFF_DVI ; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;if (pipe_config->has_hdmi_sink)
drivers/gpu/drm/i915/intel_lvds.c +2 -0
@@ -419,6 +419,8 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, pipe_config->pipe_bpp = lvds_bpp; } + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; +/* * We have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode,
drivers/gpu/drm/i915/intel_sdvo.c +1 -0
@@ -1132,6 +1132,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,DRM_DEBUG_KMS ("forcing bpc to 8 for SDVO\n" ); pipe_config->pipe_bpp =8 *3 ; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ;if (HAS_PCH_SPLIT (to_i915 (encoder->base.dev))) pipe_config->has_pch_encoder = true;
drivers/gpu/drm/i915/intel_tv.c +1 -0
@@ -881,6 +881,7 @@ intel_tv_compute_config(struct intel_encoder *encoder,if (!tv_mode)return false; + pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; pipe_config->base.adjusted_mode.crtc_clock = tv_mode->clock;DRM_DEBUG_KMS ("forcing bpc to 8 for TV\n" ); pipe_config->pipe_bpp =8 *3 ;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 2/8 drm/i915: Add CRTC output format YCBCR 4:2:0
In reply to Shashank SharmaCurrently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags.
This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset.
V3: Added this patch in the series, to address review comments from
second patchset.
V4: Added r-b from Maarten (on v3)
Addressed review comments from Ville:
- Change the enum name to intel_output_format from crtc_output_format.
- Start the enum value (INVALID) from 0 instaed of 1.
- Set the crtc's output_format to RGB in encoder's compute_config.
V5: Broke previous patch 1 into two parts,
- first patch to add CRTC output format in general
- second patch (this one) to add YCBCR 4:2:0 output
format specifically.
- Use ARRAY_SIZE(format_str) for output format validity check (Ville)
V6: Added a separate function to calculate crtc_state->output_format, and
calling it from various get_config function (Fix CI build warning)
V7: Fixed checkpatch warnings for alignment
--- drivers/gpu/drm/i915/intel_color.c | 2 +- drivers/gpu/drm/i915/intel_ddi.c | 2 +- drivers/gpu/drm/i915/intel_display.c | 72 +++++++++++++++++++++--------------- drivers/gpu/drm/i915/intel_drv.h | 4 +- drivers/gpu/drm/i915/intel_hdmi.c | 6 +-- drivers/gpu/drm/i915/intel_panel.c | 2 +- 6 files changed, 50 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/intel_color.c +1 -1
@@ -149,7 +149,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)if (INTEL_GEN (dev_priv) >=8 ||IS_HASWELL (dev_priv)) limited_color_range = intel_crtc_state->limited_color_range; -if (intel_crtc_state->ycbcr420) { +if (intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) {ilk_load_ycbcr_conversion_matrix (intel_crtc);return ; }else if (crtc_state->ctm) {
drivers/gpu/drm/i915/intel_ddi.c +1 -1
@@ -1384,7 +1384,7 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)else dotclock = pipe_config->port_clock; -if (pipe_config->ycbcr420) +if (pipe_config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) dotclock *=2 ;if (pipe_config->pixel_multiplier)
drivers/gpu/drm/i915/intel_display.c +43 -29
140 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +1 -3
@@ -702,6 +702,7 @@ struct intel_crtc_wm_state {enum intel_output_format {INTEL_OUTPUT_FORMAT_INVALID ,INTEL_OUTPUT_FORMAT_RGB , +INTEL_OUTPUT_FORMAT_YCBCR420 , };struct intel_crtc_state {
@@ -890,9 +891,6 @@ struct intel_crtc_state {/* HDMI High TMDS char rate ratio */ bool hdmi_high_tmds_clock_ratio; -/* output format is YCBCR 4:2:0 */ -bool ycbcr420; -/* Output format RGB/YCBCR etc */ enum intel_output_format output_format; };
drivers/gpu/drm/i915/intel_hdmi.c +3 -3
@@ -479,7 +479,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,return ; } -if (crtc_state->ycbcr420) +if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) frame.avi.colorspace =HDMI_COLORSPACE_YUV420 ;else frame.avi.colorspace =HDMI_COLORSPACE_RGB ;
@@ -1612,7 +1612,7 @@ static bool hdmi_12bpc_possible(const struct intel_crtc_state *crtc_state)if (connector_state->crtc != crtc_state->base.crtc)continue ; -if (crtc_state->ycbcr420) { +if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) {const struct drm_hdmi_info *hdmi = &info->hdmi;if (!(hdmi->y420_dc_modes &DRM_EDID_YCBCR420_DC_36 ))
@@ -1647,7 +1647,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector, config->port_clock /=2 ; *clock_12bpc /=2 ; *clock_8bpc /=2 ; - config->ycbcr420 = true; + config->output_format =INTEL_OUTPUT_FORMAT_YCBCR420 ;/* YCBCR 420 output conversion needs a scaler */ if (skl_update_scaler_crtc (config)) {
drivers/gpu/drm/i915/intel_panel.c +1 -1
@@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,/* Native modes don't need fitting */ if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w && adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h && - !pipe_config->ycbcr420) + pipe_config->output_format !=INTEL_OUTPUT_FORMAT_YCBCR420 ) goto done;switch (fitting_mode) {
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v7 2/8] drm/i915: Add CRTC output format YCBCR 4:2:0
Hi Shashank,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on drm-intel/for-linux-next]
[also build test WARNING on next-20180403]
[cannot apply to v4.16]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Shashank-Sharma/YCBCR-4-2-0-4-4-4-output-support-for-LSPCON/20180403-181234 base: git://anongit.freedesktop.org/drm-intel for-linux-next
New smatch warnings:drivers/gpu/drm/i915/intel_display.c:10678 output_formats() error: buffer overflow 'output_format_str' 3 <= 3
# https://github.com/0day-ci/linux/commit/51bf28f3f43755c090f4ae3519868bef7b20bf75
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout 51bf28f3f43755c090f4ae3519868bef7b20bf75
vim +/output_format_str +10678 drivers/gpu/drm/i915/intel_display.c
ffc57acc Shashank Sharma 2018-04-03 10672
ffc57acc Shashank Sharma 2018-04-03 10673 static const char *output_formats(enum intel_output_format format)
ffc57acc Shashank Sharma 2018-04-03 10674 {
51bf28f3 Shashank Sharma 2018-04-03 10675 if (format < INTEL_OUTPUT_FORMAT_RGB ||
51bf28f3 Shashank Sharma 2018-04-03 10676 format > ARRAY_SIZE(output_format_str))
ffc57acc Shashank Sharma 2018-04-03 10677 format = INTEL_OUTPUT_FORMAT_INVALID;ffc57acc Shashank Sharma 2018-04-03 @10678 return output_format_str[format];ffc57acc Shashank Sharma 2018-04-03 10679 }ffc57acc Shashank Sharma 2018-04-03 10680
PATCH v7 3/8 drm/i915: Add CRTC output format YCBCR 4:4:4
In reply to Shashank SharmaThis patch adds support for YCBCR 4:4:4 CRTC output format. To do this, this patch extends the existing YCBCR 4:2:0 framework by:
- Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format.
- Adding case for YCBCR 4:4:4 in while setting AVI infoframes.
- Adding necessary checks in modeset sequence.
V3: Added this patch in the series
V4: Added r-b from Maarten (for v3)
Addressed review comment from Ville:
Do not use (config->output_format > CRTC_OUTPUT_RGB)
V5: Rebase
V6: Rebase and small change, to accommodate changes in patch 2
V6: Fixed checkpatch alignment warnings
--- drivers/gpu/drm/i915/intel_color.c | 3 ++- drivers/gpu/drm/i915/intel_display.c | 13 +++++++++---- drivers/gpu/drm/i915/intel_drv.h | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 2 ++ 4 files changed, 14 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_color.c +2 -1
@@ -149,7 +149,8 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)if (INTEL_GEN (dev_priv) >=8 ||IS_HASWELL (dev_priv)) limited_color_range = intel_crtc_state->limited_color_range; -if (intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) { +if (intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 || + intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) {ilk_load_ycbcr_conversion_matrix (intel_crtc);return ; }else if (crtc_state->ctm) {
drivers/gpu/drm/i915/intel_display.c +9 -4
@@ -6458,8 +6458,9 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,return -EINVAL ; } -if (pipe_config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 && - pipe_config->base.ctm) { +if ((pipe_config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 || + pipe_config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) && + pipe_config->base.ctm) {/* * There is only one pipe CSC unit per pipe, and we need that * for output conversion from RGB->YCBCR. So if CTM is already
@@ -7677,6 +7678,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc, output =INTEL_OUTPUT_FORMAT_INVALID ; else output =INTEL_OUTPUT_FORMAT_YCBCR420 ; + }else { + output =INTEL_OUTPUT_FORMAT_YCBCR444 ; } } }
@@ -8319,11 +8322,13 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)if (intel_crtc->config->dither) val |=PIPEMISC_DITHER_ENABLE |PIPEMISC_DITHER_TYPE_SP ; -if (config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) { +if (config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 || + config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) val |=PIPEMISC_OUTPUT_COLORSPACE_YUV ; + +if (config->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) val |=PIPEMISC_YUV420_ENABLE |PIPEMISC_YUV420_MODE_FULL_BLEND ; - }I915_WRITE (PIPEMISC (intel_crtc->pipe), val); }
drivers/gpu/drm/i915/intel_drv.h +1 -0
@@ -703,6 +703,7 @@ enum intel_output_format {INTEL_OUTPUT_FORMAT_INVALID ,INTEL_OUTPUT_FORMAT_RGB ,INTEL_OUTPUT_FORMAT_YCBCR420 , + INTEL_OUTPUT_FORMAT_YCBCR444, }; struct intel_crtc_state {
drivers/gpu/drm/i915/intel_hdmi.c +2 -0
@@ -481,6 +481,8 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 ) frame.avi.colorspace =HDMI_COLORSPACE_YUV420 ; +else if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) + frame.avi.colorspace =HDMI_COLORSPACE_YUV444 ;else frame.avi.colorspace =HDMI_COLORSPACE_RGB ;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 4/8 drm/i915: Check LSPCON vendor OUI
In reply to Shashank SharmaFrom: "Sharma, Shashank" <[email protected]>
Intel LSPCON chip is provided by 2 vendors:
- Megachips America (MCA)
- Parade technologies (Parade tech)
Its important to know the vendor of this chip, as the address to write AVI infoframes is different for those two.
This patch reads the vendor OUI signature, and marks into LSPCON encoder structure for future usages.
This patch also does a small re-arrangement of the code, by moving lspcon mode change into probe function.
V2: Use dp->desc for OUI detection, dont add a helper for this
(Ville)
V3: Rebase, Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
--- drivers/gpu/drm/i915/intel_drv.h | 6 ++++ drivers/gpu/drm/i915/intel_lspcon.c | 69 +++++++++++++++++++++++++++++-------- 2 files changed, 61 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +6 -0
@@ -1148,9 +1148,15 @@ struct intel_dp {struct intel_dp_compliance compliance; }; +enum lspcon_vendor { +LSPCON_VENDOR_MCA , +LSPCON_VENDOR_PARADE +}; +struct intel_lspcon {bool active;enum drm_lspcon_mode mode; +enum lspcon_vendor vendor; };struct intel_digital_port {
drivers/gpu/drm/i915/intel_lspcon.c +55 -14
99 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 5/8 drm/i915: Add AVI infoframe support for LSPCON
In reply to Shashank SharmaIn order to pass AVI infoframes to LSPCON devices, a source has to write them in a vendor recommended method and location.
This patch series:
- adds generic LSPCON infoframe setup functions.
- registers these functions into existing AVI infoframe framework.
- triggers these functions from modeset sequence.
Next patches in the series will add vendor specific code.
V2: Added new parameter to align with new definition of
drm_hdmi_avi_infoframe_quant_range
V3: Added r-b from Maarten (for V2)
Added new parameter output_format in struct lspcon to accommodate Ville's review comments on last patch of the series
V4: Addressed Ville's review comment
- Do not add output_format in LSPCON state, as its non-atomic. Add this into CRTC state (added in a later patch).
V5: Rebase
V6: Rebase
V7: Rebase
--- drivers/gpu/drm/i915/intel_ddi.c | 19 +++++++++++--- drivers/gpu/drm/i915/intel_drv.h | 13 +++++++++- drivers/gpu/drm/i915/intel_hdmi.c | 13 +++++++--- drivers/gpu/drm/i915/intel_lspcon.c | 49 +++++++++++++++++++++++++++++++++++++ 4 files changed, 86 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +15 -4
@@ -2386,10 +2386,22 @@ static void intel_ddi_pre_enable(struct intel_encoder *encoder,intel_set_cpu_fifo_underrun_reporting (dev_priv, pipe, true); -if (intel_crtc_has_type (crtc_state,INTEL_OUTPUT_HDMI )) +if (intel_crtc_has_type (crtc_state,INTEL_OUTPUT_HDMI )) {intel_ddi_pre_enable_hdmi (encoder, crtc_state, conn_state); -else + }else { +struct intel_lspcon *lspcon = +enc_to_intel_lspcon (&encoder->base); +intel_ddi_pre_enable_dp (encoder, crtc_state, conn_state); +if (lspcon->active) { +struct intel_digital_port *dig_port = +enc_to_dig_port (&encoder->base); + + dig_port->set_infoframes (&encoder->base, + crtc_state->has_infoframe, + crtc_state, conn_state); + } + } }static void intel_disable_ddi_buf (struct intel_encoder *encoder)
@@ -3239,8 +3251,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)MISSING_CASE (port); } -intel_infoframe_init (intel_dig_port); -if (init_dp) {if (!intel_ddi_init_dp_connector (intel_dig_port)) goto err;
@@ -3270,6 +3280,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) port_name(port)); } +intel_infoframe_init (intel_dig_port);return ; err:
drivers/gpu/drm/i915/intel_drv.h +12 -1
@@ -1282,6 +1282,12 @@ static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)return &enc_to_dig_port (encoder)->dp; } +static inline struct intel_lspcon * +enc_to_intel_lspcon (struct drm_encoder *encoder) +{ +return &enc_to_dig_port (encoder)->lspcon; +} +static inline struct intel_digital_port *dp_to_dig_port (struct intel_dp *intel_dp) {
@@ -1807,7 +1813,6 @@ bool intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,void intel_dp_dual_mode_set_tmds_output (struct intel_hdmi *hdmi,bool enable);void intel_infoframe_init (struct intel_digital_port *intel_dig_port); -/* intel_lvds.c */ void intel_lvds_init (struct drm_i915_private *dev_priv);struct intel_encoder *intel_get_lvds_encoder (struct drm_device *dev);
@@ -2150,6 +2155,12 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);bool lspcon_init (struct intel_digital_port *intel_dig_port);void lspcon_resume (struct intel_lspcon *lspcon);void lspcon_wait_pcon_mode (struct intel_lspcon *lspcon); +void lspcon_set_infoframes (struct drm_encoder *encoder, +bool enable, +const struct intel_crtc_state *crtc_state, +const struct drm_connector_state *conn_state); +bool lspcon_infoframe_enabled (struct drm_encoder *encoder, +const struct intel_crtc_state *pipe_config);/* intel_pipe_crc.c */ int intel_pipe_crc_create (struct drm_minor *minor);
drivers/gpu/drm/i915/intel_hdmi.c +10 -3
@@ -2279,9 +2279,16 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port) intel_dig_port->set_infoframes = g4x_set_infoframes; intel_dig_port->infoframe_enabled = g4x_infoframe_enabled; }else if (HAS_DDI (dev_priv)) { - intel_dig_port->write_infoframe = hsw_write_infoframe; - intel_dig_port->set_infoframes = hsw_set_infoframes; - intel_dig_port->infoframe_enabled = hsw_infoframe_enabled; +if (intel_dig_port->lspcon.active) { + intel_dig_port->set_infoframes = lspcon_set_infoframes; + intel_dig_port->infoframe_enabled = + lspcon_infoframe_enabled; + }else { + intel_dig_port->set_infoframes = hsw_set_infoframes; + intel_dig_port->infoframe_enabled = + hsw_infoframe_enabled; + intel_dig_port->write_infoframe = hsw_write_infoframe; + } }else if (HAS_PCH_IBX (dev_priv)) { intel_dig_port->write_infoframe = ibx_write_infoframe; intel_dig_port->set_infoframes = ibx_set_infoframes;
drivers/gpu/drm/i915/intel_lspcon.c +49 -0
55 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 6/8 drm/i915: Write AVI infoframes for MCA LSPCON
In reply to Shashank SharmaFrom: "Sharma, Shashank" <[email protected]>
As LSPCON is a DP branch device, LSPCON vendors define specific methods to pass AVI infoframes to the the chip. This patch adds:
- a generic wrapper function for writing AVI infoframes for all LSPCON devices.
- a vendor specific function to wrire AVI infoframes into MCA LSPCON devices.
V2: Rebase
V3: Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Fixed checkpatch warnings for alignment
--- drivers/gpu/drm/i915/intel_drv.h | 4 ++ drivers/gpu/drm/i915/intel_hdmi.c | 2 + drivers/gpu/drm/i915/intel_lspcon.c | 79 +++++++++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+)
drivers/gpu/drm/i915/intel_drv.h +4 -0
@@ -2155,6 +2155,10 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);bool lspcon_init (struct intel_digital_port *intel_dig_port);void lspcon_resume (struct intel_lspcon *lspcon);void lspcon_wait_pcon_mode (struct intel_lspcon *lspcon); +void lspcon_write_infoframe (struct drm_encoder *encoder, +const struct intel_crtc_state *crtc_state, +unsigned int type, +const void *buf,ssize_t len); void lspcon_set_infoframes(struct drm_encoder *encoder, bool enable, const struct intel_crtc_state *crtc_state,
drivers/gpu/drm/i915/intel_hdmi.c +2 -0
@@ -2280,6 +2280,8 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port) intel_dig_port->infoframe_enabled = g4x_infoframe_enabled; }else if (HAS_DDI (dev_priv)) {if (intel_dig_port->lspcon.active) { + intel_dig_port->write_infoframe = + lspcon_write_infoframe; intel_dig_port->set_infoframes = lspcon_set_infoframes; intel_dig_port->infoframe_enabled = lspcon_infoframe_enabled;
drivers/gpu/drm/i915/intel_lspcon.c +79 -0
91 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 7/8 drm/i915: Write AVI infoframes for Parade LSPCON
In reply to Shashank SharmaDifferent LSPCON vendors specify their custom methods to pass AVI infoframes to the LSPCON chip, so does Parade tech.
This patch adds functions to arrange and write AVI infoframes into Parade LSPCON chips.
V2: rebase
V3: Added r-b from Maarten
V4: rebase
V5: rebase
V6: rebase
V7: Fixed checkpatch warnings for alignment
--- drivers/gpu/drm/i915/intel_lspcon.c | 117 +++++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_lspcon.c +116 -1
@@ -37,6 +37,12 @@#define LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)#define LSPCON_MCA_AVI_IF_HANDLED (1 << 1) +/* AUX addresses to write Parade AVI IF */ +#define LSPCON_PARADE_AVI_IF_WRITE_OFFSET 0x516 +#define LSPCON_PARADE_AVI_IF_CTRL 0x51E +#define LSPCON_PARADE_AVI_IF_KICKOFF (1 << 7) +#define LSPCON_PARADE_AVI_IF_DATA_SIZE 32 +static struct intel_dp *lspcon_to_intel_dp (struct intel_lspcon *lspcon) { struct intel_digital_port *dig_port =
@@ -240,6 +246,111 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)DRM_DEBUG_KMS ("LSPCON DP descriptor mismatch after resume\n" ); } +static bool lspcon_parade_fw_ready (struct drm_dp_aux *aux) +{ +u8 avi_if_ctrl; +u8 retry; +ssize_t ret; + +/* Check if LSPCON FW is ready for data */ +for (retry =0 ; retry <5 ; retry++) { +if (retry) +usleep_range (200 ,300 ); + + ret =drm_dp_dpcd_read (aux,LSPCON_PARADE_AVI_IF_CTRL , + &avi_if_ctrl,1 ); +if (ret <0 ) { +DRM_ERROR ("Failed to read AVI IF control\n" ); +return false; + } + +if ((avi_if_ctrl &LSPCON_PARADE_AVI_IF_KICKOFF ) ==0 ) +return true; + } + +DRM_ERROR ("Parade FW not ready to accept AVI IF\n" ); +return false; +} + +static bool _lspcon_parade_write_infoframe_blocks (struct drm_dp_aux *aux, +uint8_t *avi_buf) +{ +u8 avi_if_ctrl; +u8 block_count =0 ; +u8 *data; +uint16_t reg; +ssize_t ret; + +while (block_count <4 ) { +if (!lspcon_parade_fw_ready (aux)) { +DRM_DEBUG_KMS ("LSPCON FW not ready, block %d\n" , + block_count); +return false; + } + + reg =LSPCON_PARADE_AVI_IF_WRITE_OFFSET ; + data = avi_buf + block_count *8 ; + ret =drm_dp_dpcd_write (aux, reg, data,8 ); +if (ret <0 ) { +DRM_ERROR ("Failed to write AVI IF block %d\n" , + block_count); +return false; + } + +/* +* Once a block of data is written, we have to inform the FW +* about this by writing into avi infoframe control register: +* - set the kickoff bit[7] to 1 +* - write the block no. to bits[1:0] +*/ + reg =LSPCON_PARADE_AVI_IF_CTRL ; + avi_if_ctrl =LSPCON_PARADE_AVI_IF_KICKOFF | block_count; + ret =drm_dp_dpcd_write (aux, reg, &avi_if_ctrl,1 ); +if (ret <0 ) { +DRM_ERROR ("Failed to update (0x%x), block %d\n" , + reg, block_count); +return false; + } + + block_count++; + } + +DRM_DEBUG_KMS ("Wrote AVI IF blocks successfully\n" ); +return true; +} + +static bool _lspcon_write_avi_infoframe_parade (struct drm_dp_aux *aux, +const uint8_t *frame, +ssize_t len) +{ +uint8_t avi_if[LSPCON_PARADE_AVI_IF_DATA_SIZE ] = {1 , }; + +/* +* Parade's frames contains 32 bytes of data, divided +* into 4 frames: +* Token byte (first byte of first frame, must be non-zero) +* HB0 to HB2 from AVI IF (3 bytes header) +* PB0 to PB27 from AVI IF (28 bytes data) +* So it should look like this +* first block: | <token> <HB0-HB2> <DB0-DB3> | +* next 3 blocks: |<DB4-DB11>|<DB12-DB19>|<DB20-DB28>| +*/ + +if (len >LSPCON_PARADE_AVI_IF_DATA_SIZE -1 ) { +DRM_ERROR ("Invalid length of infoframes\n" ); +return false; + } + +memcpy (&avi_if[1 ], frame, len); + +if (!_lspcon_parade_write_infoframe_blocks (aux, avi_if)) { +DRM_DEBUG_KMS ("Failed to write infoframe blocks\n" ); +return false; + } + +return true; +} +static bool _lspcon_write_avi_infoframe_mca (struct drm_dp_aux *aux,const uint8_t *buffer,ssize_t len) {
@@ -294,7 +405,7 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,unsigned int type, const void *frame, ssize_t len) { - bool ret = true; + bool ret;struct intel_dp *intel_dp =enc_to_intel_dp (encoder);struct intel_lspcon *lspcon =enc_to_intel_lspcon (encoder);
@@ -305,6 +416,10 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,if (lspcon->vendor ==LSPCON_VENDOR_MCA ) ret =_lspcon_write_avi_infoframe_mca (&intel_dp->aux, frame, len); +else + ret =_lspcon_write_avi_infoframe_parade (&intel_dp->aux, + frame, len); +if (!ret) {DRM_ERROR ("Failed to write AVI infoframes\n" );return ;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v8 7/8 drm/i915: Write AVI infoframes for Parade LSPCON
Different LSPCON vendors specify their custom methods to pass AVI infoframes to the LSPCON chip, so does Parade tech.
This patch adds functions to arrange and write AVI infoframes into Parade LSPCON chips.
V2: rebase
V3: Added r-b from Maarten
V4: rebase
V5: rebase
V6: rebase
V7: Fixed checkpatch warnings for alignment
V8: Fixed another checkpatch warning for alignment
--- drivers/gpu/drm/i915/intel_lspcon.c | 117 +++++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_lspcon.c +116 -1
@@ -37,6 +37,12 @@#define LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)#define LSPCON_MCA_AVI_IF_HANDLED (1 << 1) +/* AUX addresses to write Parade AVI IF */ +#define LSPCON_PARADE_AVI_IF_WRITE_OFFSET 0x516 +#define LSPCON_PARADE_AVI_IF_CTRL 0x51E +#define LSPCON_PARADE_AVI_IF_KICKOFF (1 << 7) +#define LSPCON_PARADE_AVI_IF_DATA_SIZE 32 +static struct intel_dp *lspcon_to_intel_dp (struct intel_lspcon *lspcon) { struct intel_digital_port *dig_port =
@@ -240,6 +246,111 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)DRM_DEBUG_KMS ("LSPCON DP descriptor mismatch after resume\n" ); } +static bool lspcon_parade_fw_ready (struct drm_dp_aux *aux) +{ +u8 avi_if_ctrl; +u8 retry; +ssize_t ret; + +/* Check if LSPCON FW is ready for data */ +for (retry =0 ; retry <5 ; retry++) { +if (retry) +usleep_range (200 ,300 ); + + ret =drm_dp_dpcd_read (aux,LSPCON_PARADE_AVI_IF_CTRL , + &avi_if_ctrl,1 ); +if (ret <0 ) { +DRM_ERROR ("Failed to read AVI IF control\n" ); +return false; + } + +if ((avi_if_ctrl &LSPCON_PARADE_AVI_IF_KICKOFF ) ==0 ) +return true; + } + +DRM_ERROR ("Parade FW not ready to accept AVI IF\n" ); +return false; +} + +static bool _lspcon_parade_write_infoframe_blocks (struct drm_dp_aux *aux, +uint8_t *avi_buf) +{ +u8 avi_if_ctrl; +u8 block_count =0 ; +u8 *data; +uint16_t reg; +ssize_t ret; + +while (block_count <4 ) { +if (!lspcon_parade_fw_ready (aux)) { +DRM_DEBUG_KMS ("LSPCON FW not ready, block %d\n" , + block_count); +return false; + } + + reg =LSPCON_PARADE_AVI_IF_WRITE_OFFSET ; + data = avi_buf + block_count *8 ; + ret =drm_dp_dpcd_write (aux, reg, data,8 ); +if (ret <0 ) { +DRM_ERROR ("Failed to write AVI IF block %d\n" , + block_count); +return false; + } + +/* +* Once a block of data is written, we have to inform the FW +* about this by writing into avi infoframe control register: +* - set the kickoff bit[7] to 1 +* - write the block no. to bits[1:0] +*/ + reg =LSPCON_PARADE_AVI_IF_CTRL ; + avi_if_ctrl =LSPCON_PARADE_AVI_IF_KICKOFF | block_count; + ret =drm_dp_dpcd_write (aux, reg, &avi_if_ctrl,1 ); +if (ret <0 ) { +DRM_ERROR ("Failed to update (0x%x), block %d\n" , + reg, block_count); +return false; + } + + block_count++; + } + +DRM_DEBUG_KMS ("Wrote AVI IF blocks successfully\n" ); +return true; +} + +static bool _lspcon_write_avi_infoframe_parade (struct drm_dp_aux *aux, +const uint8_t *frame, +ssize_t len) +{ +uint8_t avi_if[LSPCON_PARADE_AVI_IF_DATA_SIZE ] = {1 , }; + +/* +* Parade's frames contains 32 bytes of data, divided +* into 4 frames: +* Token byte (first byte of first frame, must be non-zero) +* HB0 to HB2 from AVI IF (3 bytes header) +* PB0 to PB27 from AVI IF (28 bytes data) +* So it should look like this +* first block: | <token> <HB0-HB2> <DB0-DB3> | +* next 3 blocks: |<DB4-DB11>|<DB12-DB19>|<DB20-DB28>| +*/ + +if (len >LSPCON_PARADE_AVI_IF_DATA_SIZE -1 ) { +DRM_ERROR ("Invalid length of infoframes\n" ); +return false; + } + +memcpy (&avi_if[1 ], frame, len); + +if (!_lspcon_parade_write_infoframe_blocks (aux, avi_if)) { +DRM_DEBUG_KMS ("Failed to write infoframe blocks\n" ); +return false; + } + +return true; +} +static bool _lspcon_write_avi_infoframe_mca (struct drm_dp_aux *aux,const uint8_t *buffer,ssize_t len) {
@@ -294,7 +405,7 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,unsigned int type, const void *frame, ssize_t len) { - bool ret = true; + bool ret;struct intel_dp *intel_dp =enc_to_intel_dp (encoder);struct intel_lspcon *lspcon =enc_to_intel_lspcon (encoder);
@@ -305,6 +416,10 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,if (lspcon->vendor ==LSPCON_VENDOR_MCA ) ret =_lspcon_write_avi_infoframe_mca (&intel_dp->aux, frame, len); +else + ret =_lspcon_write_avi_infoframe_parade (&intel_dp->aux, + frame, len); +if (!ret) {DRM_ERROR ("Failed to write AVI infoframes\n" );return ;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 8/8 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
In reply to Shashank SharmaLSPCON chips can generate YCBCR outputs, if asked nicely :).
In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes
Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes
So for both 4:2:0 as well as 4:4:4 outputs, we are driving the pipe for YCBCR 4:4:4 output, but AVI infoframe's color space information indicates LSPCON FW to start scaling down from YCBCR 4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.
V2: rebase
V3: Addressed review comments from Ville
- add enum crtc_output_format instead of bool ycbcr420
- use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output cases in this way we will have YCBCR 4:4:4 framework ready (except the ABI part)
V4: Added r-b from Maarten (for v3)
Addressed review comments from Ville:
- Do not add a non-atomic state variable to determine lspcon output. Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
- Change the state bool name from external scaling to something more relavent.
- Keep the info and adjusted_mode structures const.
- use crtc_state instead of pipe_config.
- Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
PS: Ignored following warnings to match the current formatting:
drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
-:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_ddi.c | 7 +++++++ drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 4 ++++ drivers/gpu/drm/i915/intel_drv.h | 5 +++++ drivers/gpu/drm/i915/intel_lspcon.c | 26 ++++++++++++++++++++++++++ 6 files changed, 56 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -8718,6 +8718,8 @@ enum skl_power_gate {#define TRANS_MSA_MISC (tran) _MMIO_TRANS2(tran, _TRANSA_MSA_MISC)#define TRANS_MSA_SYNC_CLK (1<<0) +#define TRANS_MSA_SAMPLING_444 (2<<1) +#define TRANS_MSA_CLRSP_YCBCR (2<<3)#define TRANS_MSA_6_BPC (0<<5)#define TRANS_MSA_8_BPC (1<<5)#define TRANS_MSA_10_BPC (2<<5)
drivers/gpu/drm/i915/intel_ddi.c +7 -0
@@ -1619,6 +1619,13 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)break ; } +/* +* As per DP 1.2 spec section 2.3.4.3 while sending +* YCBCR 444 signals we should program MSA MISC1/0 fields with +* colorspace information. The output colorspace encoding is BT601. +*/ +if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) + temp |=TRANS_MSA_SAMPLING_444 |TRANS_MSA_CLRSP_YCBCR ;I915_WRITE (TRANS_MSA_MISC (cpu_transcoder), temp); }
drivers/gpu/drm/i915/intel_display.c +12 -0
@@ -7662,6 +7662,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum intel_output_format output =INTEL_OUTPUT_FORMAT_RGB ; + pipe_config->lspcon_downsampling = false; +if (IS_BROADWELL (dev_priv) ||INTEL_GEN (dev_priv) >=9 ) {u32 tmp =I915_READ (PIPEMISC (crtc->pipe));
@@ -7679,6 +7681,16 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,else output =INTEL_OUTPUT_FORMAT_YCBCR420 ; }else { +/* +* Currently there is no interface defined to +* check user preference between RGB/YCBCR444 +* or YCBCR420. So the only possible case for +* YCBCR444 usage is driving YCBCR420 output +* with LSPCON, when pipe is configured for +* YCBCR444 output and LSPCON takes care of +* downsampling it. +*/ + pipe_config->lspcon_downsampling = true; output =INTEL_OUTPUT_FORMAT_YCBCR444 ; } }
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -1693,6 +1693,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base); +struct intel_lspcon *lspcon =enc_to_intel_lspcon (&encoder->base);enum port port = encoder->port;struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->base.crtc);struct intel_connector *intel_connector = intel_dp->attached_connector;
@@ -1723,6 +1724,9 @@ intel_dp_compute_config(struct intel_encoder *encoder, pipe_config->has_pch_encoder = true; pipe_config->output_format =INTEL_OUTPUT_FORMAT_RGB ; +if (lspcon->active) +lspcon_ycbcr420_config (&intel_connector->base, pipe_config); + pipe_config->has_drrs = false;if (IS_G4X (dev_priv) || port ==PORT_A ) pipe_config->has_audio = false;
drivers/gpu/drm/i915/intel_drv.h +5 -0
@@ -894,6 +894,9 @@ struct intel_crtc_state {/* Output format RGB/YCBCR etc */ enum intel_output_format output_format; + +/* Output down scaling is done in LSPCON device */ +bool lspcon_downsampling; };struct intel_crtc {
@@ -2165,6 +2168,8 @@ void lspcon_set_infoframes(struct drm_encoder *encoder, const struct drm_connector_state *conn_state);bool lspcon_infoframe_enabled (struct drm_encoder *encoder,const struct intel_crtc_state *pipe_config); +void lspcon_ycbcr420_config (struct drm_connector *connector, +struct intel_crtc_state *crtc_state);/* intel_pipe_crc.c */ int intel_pipe_crc_create (struct drm_minor *minor);
drivers/gpu/drm/i915/intel_lspcon.c +26 -0
@@ -180,6 +180,21 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)return true; } +void lspcon_ycbcr420_config (struct drm_connector *connector, +struct intel_crtc_state *crtc_state) +{ +const struct drm_display_info *info = &connector->display_info; +const struct drm_display_mode *adjusted_mode = + &crtc_state->base.adjusted_mode; + +if (drm_mode_is_420_only (info, adjusted_mode) && + connector->ycbcr_420_allowed) { + crtc_state->port_clock /=2 ; + crtc_state->output_format =INTEL_OUTPUT_FORMAT_YCBCR444 ; + crtc_state->lspcon_downsampling = true; + } +} +static bool lspcon_probe (struct intel_lspcon *lspcon) {int retry;
@@ -455,6 +470,15 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,return ; } +if (crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) { +if (crtc_state->lspcon_downsampling) + frame.avi.colorspace =HDMI_COLORSPACE_YUV420 ; +else + frame.avi.colorspace =HDMI_COLORSPACE_YUV444 ; + }else { + frame.avi.colorspace =HDMI_COLORSPACE_RGB ; + } + drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode, crtc_state->limited_color_range ? HDMI_QUANTIZATION_RANGE_LIMITED :
@@ -508,6 +532,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)struct intel_lspcon *lspcon = &intel_dig_port->lspcon;struct drm_device *dev = intel_dig_port->base.base.dev;struct drm_i915_private *dev_priv =to_i915 (dev); +struct drm_connector *connector = &dp->attached_connector->base;if (!HAS_LSPCON (dev_priv)) {DRM_ERROR ("LSPCON is not supported on this platform\n" );
@@ -532,6 +557,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)return false; } + connector->ycbcr_420_allowed = true; lspcon->active = true;DRM_DEBUG_KMS ("Success: LSPCON init\n" );return true;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
093f7ee765f1 drm/i915: Introduce CRTC output format
-:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#87: FILE: drivers/gpu/drm/i915/intel_display.c:10690:
+ DRM_DEBUG_KMS("output format: %s\n",
+ output_formats(pipe_config->output_format));total: 0 errors, 0 warnings, 1 checks, 139 lines checked 5aad7ff8f693 drm/i915: Add CRTC output format YCBCR 4:2:0 ba253735184f drm/i915: Add CRTC output format YCBCR 4:4:4 544b43272930 drm/i915: Check LSPCON vendor OUI7602c66d2d56 drm/i915: Add AVI infoframe support for LSPCON d1459992db55 drm/i915: Write AVI infoframes for MCA LSPCON a03dd8af9824 drm/i915: Write AVI infoframes for Parade LSPCON -:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #87: FILE: drivers/gpu/drm/i915/intel_lspcon.c:287:
+ DRM_DEBUG_KMS("LSPCON FW not ready, block %d\n",
+ block_count);
total: 0 errors, 0 warnings, 1 checks, 141 lines checked cbb6eaa686ed drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE: drivers/gpu/drm/i915/i915_reg.h:8726:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
^
total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
Sent V8 for below two patches, fixing 2 alignment problems.
Please note: Ignored following 2 warnings in patch 7, to maintain the existing driver style for bit macros (also mentioned in the commit message).
-:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE: drivers/gpu/drm/i915/i915_reg.h:8726:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
Regards
Shashank
-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Tuesday, April 3, 2018 3:10 PM
To: Sharma, Shashank <[email protected]>
Cc: [email protected]
Subject: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
093f7ee765f1 drm/i915: Introduce CRTC output format
-:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#87: FILE: drivers/gpu/drm/i915/intel_display.c:10690:
+ DRM_DEBUG_KMS("output format: %s\n",
+ output_formats(pipe_config->output_format));total: 0 errors, 0 warnings, 1 checks, 139 lines checked5aad7ff8f693 drm/i915: Add CRTC output format YCBCR 4:2:0 ba253735184f drm/i915: Add CRTC output format YCBCR 4:4:4 544b43272930 drm/i915: Check LSPCON vendor OUI7602c66d2d56 drm/i915: Add AVI infoframe support for LSPCONd1459992db55 drm/i915: Write AVI infoframes for MCA LSPCONa03dd8af9824 drm/i915: Write AVI infoframes for Parade LSPCON
-:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#87: FILE: drivers/gpu/drm/i915/intel_lspcon.c:287:
+ DRM_DEBUG_KMS("LSPCON FW not ready, block %d\n",
+ block_count);
total: 0 errors, 0 warnings, 1 checks, 141 lines checked cbb6eaa686ed drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE: drivers/gpu/drm/i915/i915_reg.h:8726:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
^
total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev5)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
Series 36068v5 YCBCR 4:2:0/4:4:4 output support for LSPCON
https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/5/mbox/
---- Possible new issues:
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-WARN (fi-kbl-7567u)
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (fi-kbl-7567u)
Subgroup suspend-read-crc-pipe-c:
pass -> DMESG-WARN (fi-kbl-7567u)---- Known issues:
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> DMESG-WARN (fi-kbl-7567u) fdo#103665fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:429s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:448s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:380s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:546s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:296s fi-bxt-dsi total:285 pass:255 dwarn:0 dfail:0 fail:0 skip:30 time:512s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:513s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:522s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:509s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:414s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:565s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:506s fi-cnl-y3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:589s fi-elk-e7500 total:285 pass:225 dwarn:1 dfail:0 fail:0 skip:59 time:424s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:313s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:409s fi-ilk-650 total:285 pass:225 dwarn:0 dfail:0 fail:0 skip:60 time:422s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:470s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:432s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:474s fi-kbl-7567u total:285 pass:261 dwarn:4 dfail:0 fail:0 skip:20 time:466s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:508s fi-pnv-d510 total:285 pass:219 dwarn:1 dfail:0 fail:0 skip:65 time:662s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:446s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:531s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:506s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:509s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:428s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:445s fi-snb-2520m total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:561s fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:401s Blacklisted hosts: fi-cnl-psr total:285 pass:256 dwarn:3 dfail:0 fail:0 skip:26 time:519s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:484s
c46052cde6a50c5459e00791ffc4d5aa1ec58a9e drm-tip: 2018y-03m-30d-18h-56m-26s UTC integration manifest cbb6eaa686ed drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCONa03dd8af9824 drm/i915: Write AVI infoframes for Parade LSPCONd1459992db55 drm/i915: Write AVI infoframes for MCA LSPCON7602c66d2d56 drm/i915: Add AVI infoframe support for LSPCON544b43272930 drm/i915: Check LSPCON vendor OUIba253735184f drm/i915: Add CRTC output format YCBCR 4:4:45aad7ff8f693 drm/i915: Add CRTC output format YCBCR 4:2:0093f7ee765f1 drm/i915: Introduce CRTC output format
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8566/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
d2c64b6af6c3 drm/i915: Introduce CRTC output format
e72f33b56e79 drm/i915: Add CRTC output format YCBCR 4:2:0
2717e22e7a1b drm/i915: Add CRTC output format YCBCR 4:4:4
16bc5598c50f drm/i915: Check LSPCON vendor OUI
9391b2185374 drm/i915: Add AVI infoframe support for LSPCON
e8f2b0c2a460 drm/i915: Write AVI infoframes for MCA LSPCON
050b96901334 drm/i915: Write AVI infoframes for Parade LSPCON
1e82ce33a750 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
-:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE: drivers/gpu/drm/i915/i915_reg.h:8726:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
^
total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
As mentioned in my previous mail, these warnings are due to existing driver style of macros, and this patch is just matching it.
Regards
Shashank
-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Thursday, April 5, 2018 10:19 AM
To: Sharma, Shashank <[email protected]>
Cc: [email protected]
Subject: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
d2c64b6af6c3 drm/i915: Introduce CRTC output format
e72f33b56e79 drm/i915: Add CRTC output format YCBCR 4:2:0 2717e22e7a1b drm/i915: Add CRTC output format YCBCR 4:4:4 16bc5598c50f drm/i915: Check LSPCON vendor OUI
9391b2185374 drm/i915: Add AVI infoframe support for LSPCON
e8f2b0c2a460 drm/i915: Write AVI infoframes for MCA LSPCON
050b96901334 drm/i915: Write AVI infoframes for Parade LSPCON
1e82ce33a750 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
-:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE: drivers/gpu/drm/i915/i915_reg.h:8726:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
^
total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
+ Jani to comment too
Quoted 43 lines
-----Original Message-----
From: Sharma, Shashank
Sent: torstai 5. huhtikuuta 2018 7.51
To: [email protected]
Cc: Saarinen, Jani <[email protected]>
Subject: RE: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)As mentioned in my previous mail, these warnings are due to existing driver style of macros, and this patch is just matching it.
Regards
Shashank
-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Thursday, April 5, 2018 10:19 AM
To: Sharma, Shashank <[email protected]>
Cc: [email protected]
Subject: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning== Summary ==
$ dim checkpatch origin/drm-tip d2c64b6af6c3 drm/i915: Introduce CRTC output format e72f33b56e79 drm/i915: Add CRTC output format YCBCR 4:2:0 2717e22e7a1b drm/i915: Add CRTC output format YCBCR 4:4:4 16bc5598c50f drm/i915: Check LSPCON vendor OUI 9391b2185374 drm/i915: Add AVI infoframe support for LSPCON e8f2b0c2a460 drm/i915: Write AVI infoframes for MCA LSPCON 050b96901334 drm/i915: Write AVI infoframes for Parade LSPCON 1e82ce33a750 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725: +#define TRANS_MSA_SAMPLING_444 (2<<1) ^
Quoted 6 lines
-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE:
drivers/gpu/drm/i915/i915_reg.h:8726:
+#defineTRANS_MSA_CLRSP_YCBCR(2<<3)^total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Sharma, ShashankQuoted 2 lines · Shashank
As mentioned in my previous mail, these warnings are due to existing driver style of macros, and this patch is just matching it.
Yup, that's fine. Checkpatch just hasn't reached the level of consciousness to understand that.
BR,
Jani.
Quoted 41 lines
Regards
Shashank
-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Thursday, April 5, 2018 10:19 AM
To: Sharma, Shashank <[email protected]>
Cc: [email protected]
Subject: ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning== Summary ==
$ dim checkpatch origin/drm-tip d2c64b6af6c3 drm/i915: Introduce CRTC output format e72f33b56e79 drm/i915: Add CRTC output format YCBCR 4:2:0 2717e22e7a1b drm/i915: Add CRTC output format YCBCR 4:4:4 16bc5598c50f drm/i915: Check LSPCON vendor OUI 9391b2185374 drm/i915: Add AVI infoframe support for LSPCON e8f2b0c2a460 drm/i915: Write AVI infoframes for MCA LSPCON 050b96901334 drm/i915: Write AVI infoframes for Parade LSPCON 1e82ce33a750 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:64: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #64: FILE: drivers/gpu/drm/i915/i915_reg.h:8725: +#define TRANS_MSA_SAMPLING_444 (2<<1) ^-:65: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #65: FILE:
drivers/gpu/drm/i915/i915_reg.h:8726:
+#defineTRANS_MSA_CLRSP_YCBCR(2<<3)^total: 0 errors, 0 warnings, 2 checks, 128 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : warning
== Summary ==
Series 36068v7 YCBCR 4:2:0/4:4:4 output support for LSPCON
https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/7/mbox/
---- Possible new issues:
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-WARN (fi-kbl-7567u)
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (fi-kbl-7567u)
Subgroup suspend-read-crc-pipe-c:
pass -> DMESG-WARN (fi-kbl-7567u)---- Known issues:
Test gem_exec_suspend:
Subgroup basic-s3:
dmesg-warn -> PASS (fi-glk-j4005) fdo#103359
pass -> DMESG-WARN (fi-kbl-7567u) fdo#103665
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713
Test prime_vgem:
Subgroup basic-fence-flip:
pass -> FAIL (fi-ilk-650) fdo#104008fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:430s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:442s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:383s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:543s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:297s fi-bxt-dsi total:285 pass:255 dwarn:0 dfail:0 fail:0 skip:30 time:516s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:517s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:524s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:512s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:412s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:566s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:514s fi-elk-e7500 total:285 pass:226 dwarn:0 dfail:0 fail:0 skip:59 time:427s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:320s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:539s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:484s fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:405s fi-ilk-650 total:285 pass:224 dwarn:0 dfail:0 fail:1 skip:60 time:425s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:461s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:434s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:475s fi-kbl-7567u total:285 pass:261 dwarn:4 dfail:0 fail:0 skip:20 time:465s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:511s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:440s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:542s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:508s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:512s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:429s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:446s fi-snb-2520m total:242 pass:208 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:400s
Blacklisted hosts:
fi-cnl-psr total:285 pass:256 dwarn:3 dfail:0 fail:0 skip:26 time:517s
e29a10513429cca404e9847a399efbdbb4bdd4bf drm-tip: 2018y-04m-04d-20h-47m-24s UTC integration manifest 1e82ce33a750 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON050b96901334 drm/i915: Write AVI infoframes for Parade LSPCONe8f2b0c2a460 drm/i915: Write AVI infoframes for MCA LSPCON9391b2185374 drm/i915: Add AVI infoframe support for LSPCON16bc5598c50f drm/i915: Check LSPCON vendor OUI2717e22e7a1b drm/i915: Add CRTC output format YCBCR 4:4:4e72f33b56e79 drm/i915: Add CRTC output format YCBCR 4:2:0d2c64b6af6c3 drm/i915: Introduce CRTC output format
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8585/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4024_full -> Patchwork_8585_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_8585_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_8585_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/7/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8585_full:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_params@dr1-dirt:
shard-kbl: PASS -> NOTRUN +1958
igt@gem_pwrite@display:
shard-snb: PASS -> NOTRUN +1377
igt@kms_chv_cursor_fail@pipe-b-256x256-top-edge:
shard-hsw: PASS -> NOTRUN +1781
igt@kms_frontbuffer_tracking@psrdrrs-1p-primscrn-cur-indfb-draw-pwrite:
shard-apl: SKIP -> NOTRUN +1654
igt@kms_frontbuffer_tracking@psrdrrs-2p-primscrn-cur-indfb-draw-mmap-cpu:
shard-hsw: SKIP -> NOTRUN +1709
igt@kms_frontbuffer_tracking@psrdrrs-2p-primscrn-pri-shrfb-draw-mmap-gtt:
shard-kbl: SKIP -> NOTRUN +1528
igt@kms_rotation_crc@sprite-rotation-90-pos-100-0:
shard-apl: PASS -> NOTRUN +1833
igt@perf_pmu@busy-start-vcs1:
shard-snb: SKIP -> NOTRUN +2117== Known issues ==
Here are the changes found in Patchwork_8585_full that come from known issues:
=== IGT changes ===
==== Possible fixes ====
igt@drv_selftest@mock_scatterlist:
shard-hsw: DMESG-WARN (fdo#103667) -> NOTRUN
shard-kbl: DMESG-WARN (fdo#103667) -> NOTRUN
shard-snb: DMESG-WARN (fdo#103667) -> NOTRUN
shard-apl: DMESG-WARN (fdo#103667) -> NOTRUN
igt@gem_exec_schedule@pi-ringfull-blt:
shard-apl: FAIL (fdo#103158) -> NOTRUN +3
igt@gem_exec_schedule@pi-ringfull-bsd1:
shard-kbl: FAIL (fdo#103158) -> NOTRUN +4
igt@kms_cursor_crc@cursor-256x256-random:
shard-kbl: DMESG-WARN (fdo#103558) -> NOTRUN +2
igt@kms_flip@2x-flip-vs-expired-vblank:
shard-hsw: FAIL (fdo#105707) -> NOTRUN
igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
shard-hsw: FAIL (fdo#102887) -> NOTRUN
igt@kms_flip@plain-flip-ts-check-interruptible:
shard-hsw: FAIL (fdo#100368) -> NOTRUN +1
igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-pwrite:
shard-apl: DMESG-FAIL (fdo#101623) -> NOTRUN
igt@kms_frontbuffer_tracking@fbc-1p-pri-indfb-multidraw:
shard-snb: FAIL (fdo#103167) -> NOTRUN
igt@kms_setmode@basic:
shard-apl: FAIL (fdo#99912) -> NOTRUN
shard-hsw: FAIL (fdo#99912) -> NOTRUN
shard-kbl: FAIL (fdo#99912) -> NOTRUN
shard-snb: FAIL (fdo#99912) -> NOTRUN
igt@kms_sysfs_edid_timing:
shard-hsw: WARN (fdo#100047) -> NOTRUN
shard-apl: WARN (fdo#100047) -> NOTRUN
shard-kbl: FAIL (fdo#100047) -> NOTRUN
igt@prime_vgem@coherency-gtt:
shard-apl: FAIL (fdo#100587) -> NOTRUN +1 fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#100587 https://bugs.freedesktop.org/show_bug.cgi?id=100587
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103667 https://bugs.freedesktop.org/show_bug.cgi?id=103667
fdo#105707 https://bugs.freedesktop.org/show_bug.cgi?id=105707
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (5 -> 5) ==
Additional (1): shard-glk
Missing (1): shard-glkb
== Build changes ==
* Linux: CI_DRM_4024 -> Patchwork_8585
* Piglit: None -> piglit_4409
CI_DRM_4024: e29a10513429cca404e9847a399efbdbb4bdd4bf @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4409: e861c22db76c1c59547ccb36b668b9204201e81a @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8585: 1e82ce33a75059fc369c93a702e0ad4ee98c5095 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4409: 965b55efbdf37985c731d68259012fdc5cef3d09 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8585/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : failure
== Summary ==
Applying: drm/i915: Introduce CRTC output format
Applying: drm/i915: Add CRTC output format YCBCR 4:2:0
error: sha1 information is lacking or useless (drivers/gpu/drm/i915/intel_display.c).
error: could not build fake ancestor
Patch failed at 0002 drm/i915: Add CRTC output format YCBCR 4:2:0
The copy of the patch that failed is found in: .git/rebase-apply/patch When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8585/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev7)
URL : https://patchwork.freedesktop.org/series/36068/
State : failure
== Summary ==
Applying: drm/i915: Introduce CRTC output format
Applying: drm/i915: Add CRTC output format YCBCR 4:2:0
error: sha1 information is lacking or useless (drivers/gpu/drm/i915/intel_display.c).
error: could not build fake ancestor
Patch failed at 0002 drm/i915: Add CRTC output format YCBCR 4:2:0
The copy of the patch that failed is found in: .git/rebase-apply/patch When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8585/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx