drm/i915/psr: enable psr1 on psr2 panels
Subsystems (2)
PATCH 1/1 drm/i915/psr: enable psr1 on psr2 panels
From: Vathsala Nagaraju <[email protected]>
Adds force_psr1 mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.
--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)
drivers/gpu/drm/i915/i915_params.c +5 -0
@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );
drivers/gpu/drm/i915/i915_params.h +1 -0
@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \
drivers/gpu/drm/i915/intel_psr.c +2 -0
@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp, crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · vathsala nagaraju
From: Vathsala Nagaraju <[email protected]>
Adds
force_psr1mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.
We should perhaps make enable_psr=1 enable just PSR1. I am not comfortable that we enable PSR2 at all, there are no tests in IGT for selective update, seems like nobody really knows exactly how well it works.
Quoted 44 lines
Cc Rodrigo Vivi <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc José Roberto de Souza <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );drivers/gpu/drm/i915/i915_params.h +1
-0@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \drivers/gpu/drm/i915/intel_psr.c +0
-0
drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 547
Quoted 8 lines
drivers/gpu/drm/i915/intel_psr.c +2
-0@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp, crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 10 lines · Dhinakaran Pandiyan
Quoted 6 lines · vathsala nagaraju
From: Vathsala Nagaraju <[email protected]>
Adds
force_psr1mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.
The parameters shouldn't be used by users to select a configuration. They are marked as unsafe. We should only enable the feature when we are comfortable it doesn't cause trouble.
Quoted 6 lines
We should perhaps make enable_psr=1 enable just PSR1. I am not comfortable that we enable PSR2 at all, there are no tests in IGT for selective update, seems like nobody really knows exactly how well it works.
Agreed. Probably good for now to avoid PSR2 in all situations and only allow PSR2 when we are properly testing it.
Quoted 47 lines
Quoted 47 lines
Cc Rodrigo Vivi <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc José Roberto de Souza <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );drivers/gpu/drm/i915/i915_params.h +1
-0@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
Quoted 8 lines
drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 547
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c +2
-0crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
+ puthik
Quoted 6 lines · Rodrigo
Quoted 5 lines · Dhinakaran Pandiyan
Quoted 2 lines · vathsala nagaraju
From: Vathsala Nagaraju <[email protected]>
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Adds
force_psr1mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.The parameters shouldn't be used by users to select a configuration. They are marked as unsafe. We should only enable the feature when we are comfortable it doesn't cause trouble.
The idea was to give user the option to switch to psr1 ,if they want to.
Quoted 6 lines
Quoted 6 lines
We should perhaps make enable_psr=1 enable just PSR1. I am not comfortable that we enable PSR2 at all, there are no tests in IGT for selective update, seems like nobody really knows exactly how well it works.
with enable_psr , we are deciding whether to use psr1/psr2. we can reuse enable_psr.
Quoted 48 lines
Agreed. Probably good for now to avoid PSR2 in all situations and only allow PSR2 when we are properly testing it.
Quoted 45 lines
Quoted 45 lines
Cc Rodrigo Vivi <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc José Roberto de Souza <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );drivers/gpu/drm/i915/i915_params.h +1
-0@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 547
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c +2
-0crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 13 lines · vathsala nagaraju
+ puthik
Quoted 10 lines · Rodrigo
Quoted 9 lines · Dhinakaran Pandiyan
Quoted 6 lines · vathsala nagaraju
From: Vathsala Nagaraju <[email protected]>
Adds
force_psr1mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.
Quoted 5 lines
Quoted 3 lines
The parameters shouldn't be used by users to select a configuration. They are marked as unsafe. We should only enable the feature when we are comfortable it doesn't cause trouble.
The idea was to give user the option to switch to psr1 ,if they want to.
This is exactly the problem that I'm trying to avoid ;)
But I do understand your perspective since I had the same, at least until when Jani showed me an old but gold note from ajax:
https://www.redhat.com/archives/rhl-devel-list/2008-January/msg00861.html
If we did not validated we shouldn't be allowing the choice.
Although I'm still in favor of the parameters here because it makes our lives easier when developing and debugging. But user should never be using those.
Specially on a feature full of corner cases like PSR. So, while we don't really fix all the known bad PSR bugs we should keep it disabled.
Quoted 10 lines
Quoted 7 lines
Quoted 7 lines
We should perhaps make enable_psr=1 enable just PSR1. I am not comfortable that we enable PSR2 at all, there are no tests in IGT for selective update, seems like nobody really knows exactly how well it works.
with
enable_psr, we are deciding whether to use psr1/psr2. we can reuseenable_psr.
While we are not confident PSR2 ever worked we should not be using that at all. So if you want any change like this I would suggest to avoid PSR2 at all for everybody while we don't fix PSR2.
But when PSR and PSR2 gets enabled we keep the parameter to allow debug and triage... i.e enable_psr=0 disables PSR, enable_psr=1 enables what ever PSR is the default for that panel/platform.
Thanks,
Rodrigo.
Quoted 48 lines
Quoted 48 lines
Agreed. Probably good for now to avoid PSR2 in all situations and only allow PSR2 when we are properly testing it.
Quoted 45 lines
Quoted 45 lines
Cc Rodrigo Vivi <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc José Roberto de Souza <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );drivers/gpu/drm/i915/i915_params.h +1
-0@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 547
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c +2
-0crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 47 lines · Rodrigo Vivi
Quoted 13 lines · vathsala nagaraju
+ puthik
Quoted 10 lines · Rodrigo
Quoted 9 lines · Dhinakaran Pandiyan
Quoted 6 lines · vathsala nagaraju
From: Vathsala Nagaraju <[email protected]>
Adds
force_psr1mod parameter to enable psr1 on psr2 panels. useful in cases where psr2 fails and user wants to enable psr1 feature for power saving until a fix
is provided for psr2.Quoted 5 lines
Quoted 3 lines
The parameters shouldn't be used by users to select a configuration. They are marked as unsafe. We should only enable the feature when we are comfortable it doesn't cause trouble.
The idea was to give user the option to switch to psr1 ,if they want to.
This is exactly the problem that I'm trying to avoid ;)
But I do understand your perspective since I had the same, at least until when Jani showed me an old but gold note from ajax:
https://www.redhat.com/archives/rhl-devel-list/2008-January/msg00861.htmlIf we did not validated we shouldn't be allowing the choice.
Although I'm still in favor of the parameters here because it makes our lives easier when developing and debugging. But user should never be using those.
Specially on a feature full of corner cases like PSR. So, while we don't really fix all the known bad PSR bugs we should keep it disabled.
Quoted 10 lines
Quoted 7 lines
Quoted 7 lines
We should perhaps make enable_psr=1 enable just PSR1. I am not comfortable that we enable PSR2 at all, there are no tests in IGT for selective update, seems like nobody really knows exactly how well it works.
with
enable_psr, we are deciding whether to use psr1/psr2. we can reuseenable_psr.
Quoted 8 lines
While we are not confident PSR2 ever worked we should not be using that at all. So if you want any change like this I would suggest to avoid PSR2 at all for everybody while we don't fix PSR2.
But when PSR and PSR2 gets enabled we keep the parameter to allow debug and triage... i.e enable_psr=0 disables PSR, enable_psr=1 enables what ever PSR is the default for that panel/platform.
Vathsala,
Please make i915.enable_psr=1 to enable only PSR1 at this point. Until we add new IGT's to test for selective update, PSR2 will not receive regular testing and as such is not worthy of enabling even with a module parameter.
Quoted 59 lines
Thanks,
Rodrigo.Quoted 56 lines
Quoted 55 lines
Agreed. Probably good for now to avoid PSR2 in all situations and only allow PSR2 when we are properly testing it.
Quoted 52 lines
Quoted 52 lines
Cc Rodrigo Vivi <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc José Roberto de Souza <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- drivers/gpu/drm/i915/i915_params.c | 5 +++++ drivers/gpu/drm/i915/i915_params.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 2 ++ 3 files changed, 8 insertions(+)drivers/gpu/drm/i915/i915_params.c +5
-0@@ -95,6 +95,11 @@ struct i915_params i915_modparams __read_mostly = {"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " "Default: -1 (use per-chip default)"); +i915_param_named_unsafe (force_psr1, int,0600 , +"Enable PSR1 on PSR2 Panel " +"(0=disabled, 1=enabled) " +"Default: -1 (use per-chip default)" ); +i915_param_named_unsafe (alpha_support, bool,0400 ,"Enable alpha quality driver support for latest hardware. " "See also CONFIG_DRM_I915_ALPHA_SUPPORT." );drivers/gpu/drm/i915/i915_params.h +1
-0@@ -44,6 +44,7 @@ param(int, enable_fbc, -1) \ param(int, enable_ppgtt, -1) \ param(int, enable_psr, -1) \ + param(int, force_psr1, -1) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \drivers/gpu/drm/i915/intel_psr.c +2
-0@@ -540,6 +540,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp, crtc_state->has_psr = true; crtc_state->has_psr2 =intel_psr2_config_valid (intel_dp, crtc_state); +if (i915_modparams.force_psr1 ==1 && crtc_state->has_psr2) + crtc_state->has_psr2 = false;DRM_DEBUG_KMS ("Enabling PSR%s\n" , crtc_state->has_psr2 ?"2" :"" ); }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915/psr: enable psr1 on psr2 panels
In reply to vathsala nagaraju== Series Details ==
== Series Details ==
Series: drm/i915/psr: enable psr1 on psr2 panels
URL : https://patchwork.freedesktop.org/series/41294/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 768ed9ff8e29 drm/i915/psr: enable psr1 on psr2 panels -:28: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #28: FILE: drivers/gpu/drm/i915/i915_params.c:99: +i915_param_named_unsafe(force_psr1, int, 0600, + "Enable PSR1 on PSR2 Panel "
total: 0 errors, 0 warnings, 1 checks, 26 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/psr: enable psr1 on psr2 panels
In reply to vathsala nagaraju== Series Details ==
== Series Details ==
Series: drm/i915/psr: enable psr1 on psr2 panels
URL : https://patchwork.freedesktop.org/series/41294/
State : success
== Summary ==
Series 41294v1 drm/i915/psr: enable psr1 on psr2 panels
https://patchwork.freedesktop.org/api/1.0/series/41294/revisions/1/mbox/
---- Possible new issues:
Test drv_module_reload:
Subgroup basic-no-display:
incomplete -> PASS (fi-elk-e7500)---- Known issues:
Test prime_vgem:
Subgroup basic-fence-flip:
pass -> FAIL (fi-ilk-650) fdo#104008fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:436s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:444s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:383s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:533s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:297s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:513s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:528s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:511s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:411s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:514s fi-cnl-y3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:592s fi-elk-e7500 total:285 pass:226 dwarn:0 dfail:0 fail:0 skip:59 time:423s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:317s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:536s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:487s fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:405s fi-ilk-650 total:285 pass:224 dwarn:0 dfail:0 fail:1 skip:60 time:426s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:473s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:440s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:475s fi-kbl-7567u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:465s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:506s fi-pnv-d510 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:670s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:449s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:533s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:510s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:502s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:430s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:448s fi-snb-2520m total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:572s fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:406s
3cbdbfb1ecc8769c8db88e95b1d6ea55c5e87dbf drm-tip: 2018y-04m-06d-15h-15m-21s UTC integration manifest 768ed9ff8e29 drm/i915/psr: enable psr1 on psr2 panels
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8627/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: warning for drm/i915/psr: enable psr1 on psr2 panels
In reply to vathsala nagaraju== Series Details ==
== Series Details ==
Series: drm/i915/psr: enable psr1 on psr2 panels
URL : https://patchwork.freedesktop.org/series/41294/
State : warning
== Summary ==
---- Possible new issues:
Test gem_mmap_gtt:
Subgroup forked-medium-copy-odd:
dmesg-warn -> PASS (shard-hsw)
Test gem_pwrite:
Subgroup big-gtt-backwards:
pass -> SKIP (shard-apl)
Test kms_frontbuffer_tracking:
Subgroup fbc-2p-pri-indfb-multidraw:
dmesg-fail -> PASS (shard-hsw)---- Known issues:
Test kms_cursor_legacy:
Subgroup 2x-long-flip-vs-cursor-legacy:
fail -> PASS (shard-hsw) fdo#104873
Test kms_rotation_crc:
Subgroup primary-rotation-180:
pass -> FAIL (shard-snb) fdo#103925
Test perf:
Subgroup polling:
pass -> FAIL (shard-hsw) fdo#102252fdo#104873 https://bugs.freedesktop.org/show_bug.cgi?id=104873
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-apl total:2680 pass:1834 dwarn:1 dfail:0 fail:7 skip:837 time:12673s shard-hsw total:2680 pass:1784 dwarn:1 dfail:0 fail:3 skip:891 time:11422s shard-snb total:2680 pass:1377 dwarn:1 dfail:0 fail:3 skip:1299 time:6945s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8627/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx