Skip to contentSkip to conversation

imx31_phycore: Delete

PATCH New Tom Rini 2 participants 4 messages Apr 6, 2018 – Apr 15, 2018

Subsystems (4)
Arm (32-bit) Arm i.MX and Layerscape Framebuffer layer Arm/actions semi architecture
lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/2 imx31_phycore: Delete

This platform has been marked as orphaned since September 2013, remove.

Signed-off-by Tom Rini <[email protected]>
---
 arch/arm/Kconfig                    |  12 ---
 board/imx31_phycore/Kconfig         |  12 ---
 board/imx31_phycore/MAINTAINERS     |  11 ---
 board/imx31_phycore/Makefile        |   9 ---
 board/imx31_phycore/imx31_phycore.c | 154 -----------------------------------
 board/imx31_phycore/lowlevel_init.S |  88 --------------------
 configs/imx31_phycore_defconfig     |  19 -----
 configs/imx31_phycore_eet_defconfig |  25 ------
 drivers/video/Makefile              |   1 -
 drivers/video/s6e63d6.c             |  60 --------------
 include/configs/imx31_phycore.h     | 155 ------------------------------------
 include/s6e63d6.h                   |  21 -----
 12 files changed, 567 deletions(-)
 delete mode 100644 board/imx31_phycore/Kconfig
 delete mode 100644 board/imx31_phycore/MAINTAINERS
 delete mode 100644 board/imx31_phycore/Makefile
 delete mode 100644 board/imx31_phycore/imx31_phycore.c
 delete mode 100644 board/imx31_phycore/lowlevel_init.S
 delete mode 100644 configs/imx31_phycore_defconfig
 delete mode 100644 configs/imx31_phycore_eet_defconfig
 delete mode 100644 drivers/video/s6e63d6.c
 delete mode 100644 include/configs/imx31_phycore.h
 delete mode 100644 include/s6e63d6.h
arch/arm/Kconfig +0 -12
index 068ea1e8776f..1d2cbbff1ff6 100644
@@ -444,17 +444,6 @@ config TARGET_X600
 	select SUPPORT_SPL
 	select PL011_SERIAL
 
-config TARGET_IMX31_PHYCORE
-	bool "Support imx31_phycore_eet"
-	select CPU_ARM1136
-	select BOARD_EARLY_INIT_F
-
-config TARGET_IMX31_PHYCORE_EET
-	bool "Support imx31_phycore_eet"
-	select BOARD_LATE_INIT
-	select CPU_ARM1136
-	select BOARD_EARLY_INIT_F
-
 config TARGET_MX31ADS
 	bool "Support mx31ads"
 	select CPU_ARM1136

@@ -1343,7 +1332,6 @@ source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
 source "board/hisilicon/poplar/Kconfig"
-source "board/imx31_phycore/Kconfig"
 source "board/isee/igep003x/Kconfig"
 source "board/phytec/pcm051/Kconfig"
 source "board/silica/pengwyn/Kconfig"
board/imx31_phycore/Kconfig deleted +0 -12
deleted file mode 100644
index e897ee1c3aca..000000000000
@@ -1,12 +0,0 @@
-if TARGET_IMX31_PHYCORE || TARGET_IMX31_PHYCORE_EET
-
-config SYS_BOARD
-	default "imx31_phycore"
-
-config SYS_SOC
-	default "mx31"
-
-config SYS_CONFIG_NAME
-	default "imx31_phycore"
-
-endif
board/imx31_phycore/MAINTAINERS deleted +0 -11
deleted file mode 100644
index 41f6cae81b5d..000000000000
@@ -1,11 +0,0 @@
-IMX31_PHYCORE BOARD
-#M:	-
-S:	Maintained
-F:	board/imx31_phycore/
-F:	include/configs/imx31_phycore.h
-F:	configs/imx31_phycore_defconfig
-
-IMX31_PHYCORE_EET BOARD
-#M:	(resigned) Guennadi Liakhovetski <[email protected]>
-S:	Orphan (since 2013-09)
-F:	configs/imx31_phycore_eet_defconfig
board/imx31_phycore/Makefile deleted +0 -9
deleted file mode 100644
index e781c1393627..000000000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= imx31_phycore.o
-obj-y	+= lowlevel_init.o
board/imx31_phycore/imx31_phycore.c deleted +0 -154

154 lines not on this page · raw message

board/imx31_phycore/lowlevel_init.S deleted +0 -88

88 lines not on this page · raw message

configs/imx31_phycore_defconfig deleted +0 -19
deleted file mode 100644
index bd5717bb893e..000000000000
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_BOOTDELAY=3
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="uboot> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-CONFIG_ENV_IS_IN_EEPROM=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xa8000000
-CONFIG_SMC911X_32_BIT=y
configs/imx31_phycore_eet_defconfig deleted +0 -25
deleted file mode 100644
index 7be4f899a8e8..000000000000
@@ -1,25 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE_EET=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-CONFIG_ENV_IS_IN_EEPROM=y
-CONFIG_MXC_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xa8000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_MXC_SPI=y
-CONFIG_VIDEO=y
drivers/video/Makefile +0 -1
index dfafe08fc509..ab897e145c92 100644
@@ -30,7 +30,6 @@ obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
 obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
 obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
 obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
-obj-$(CONFIG_S6E63D6) += s6e63d6.o
 obj-$(CONFIG_LD9040) += ld9040.o
 obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
 obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
drivers/video/s6e63d6.c deleted +0 -60

60 lines not on this page · raw message

include/configs/imx31_phycore.h deleted +0 -155

155 lines not on this page · raw message

include/s6e63d6.h deleted +0 -21
deleted file mode 100644
index aa583eed1b81..000000000000
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _S6E63D6_H_
-#define _S6E63D6_H_
-
-struct s6e63d6 {
-	unsigned int bus;
-	unsigned int cs;
-	unsigned int id;
-	struct spi_slave *slave;
-};
-
-extern int s6e63d6_init(struct s6e63d6 *data);
-extern int s6e63d6_index(struct s6e63d6 *data, u8 idx);
-extern int s6e63d6_param(struct s6e63d6 *data, u16 param);
-
-#endif
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 2/2 mx31ads: Delete

This platform has been marked as orphaned since September 2013, remove.

Signed-off-by Tom Rini <[email protected]>
---
 arch/arm/Kconfig                        |   6 -
 board/freescale/mx31ads/Kconfig         |  15 --
 board/freescale/mx31ads/MAINTAINERS     |   6 -
 board/freescale/mx31ads/Makefile        |   8 -
 board/freescale/mx31ads/lowlevel_init.S | 268 --------------------------------
 board/freescale/mx31ads/mx31ads.c       | 114 --------------
 board/freescale/mx31ads/u-boot.lds      | 110 -------------
 configs/mx31ads_defconfig               |  15 --
 include/configs/mx31ads.h               | 144 -----------------
 9 files changed, 686 deletions(-)
 delete mode 100644 board/freescale/mx31ads/Kconfig
 delete mode 100644 board/freescale/mx31ads/MAINTAINERS
 delete mode 100644 board/freescale/mx31ads/Makefile
 delete mode 100644 board/freescale/mx31ads/lowlevel_init.S
 delete mode 100644 board/freescale/mx31ads/mx31ads.c
 delete mode 100644 board/freescale/mx31ads/u-boot.lds
 delete mode 100644 configs/mx31ads_defconfig
 delete mode 100644 include/configs/mx31ads.h
arch/arm/Kconfig +0 -6
index 1d2cbbff1ff6..9f5e1656100f 100644
@@ -444,11 +444,6 @@ config TARGET_X600
 	select SUPPORT_SPL
 	select PL011_SERIAL
 
-config TARGET_MX31ADS
-	bool "Support mx31ads"
-	select CPU_ARM1136
-	select BOARD_EARLY_INIT_F
-
 config TARGET_MX31PDK
 	bool "Support mx31pdk"
 	select BOARD_LATE_INIT

@@ -1322,7 +1317,6 @@ source "board/freescale/ls1046ardb/Kconfig"
 source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
-source "board/freescale/mx31ads/Kconfig"
 source "board/freescale/mx31pdk/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
board/freescale/mx31ads/Kconfig deleted +0 -15
deleted file mode 100644
index eeeb6f490fd2..000000000000
@@ -1,15 +0,0 @@
-if TARGET_MX31ADS
-
-config SYS_BOARD
-	default "mx31ads"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "mx31"
-
-config SYS_CONFIG_NAME
-	default "mx31ads"
-
-endif
board/freescale/mx31ads/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 5f6ec268c7e1..000000000000
@@ -1,6 +0,0 @@
-MX31ADS BOARD
-#M:	(resigned) Guennadi Liakhovetski <[email protected]>
-S:	Orphan (since 2013-09)
-F:	board/freescale/mx31ads/
-F:	include/configs/mx31ads.h
-F:	configs/mx31ads_defconfig
board/freescale/mx31ads/Makefile deleted +0 -8
deleted file mode 100644
index 5e1440d59668..000000000000
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mx31ads.o
-obj-y	+= lowlevel_init.o
board/freescale/mx31ads/lowlevel_init.S deleted +0 -268

268 lines not on this page · raw message

board/freescale/mx31ads/mx31ads.c deleted +0 -114

114 lines not on this page · raw message

board/freescale/mx31ads/u-boot.lds deleted +0 -110

110 lines not on this page · raw message

configs/mx31ads_defconfig deleted +0 -15
deleted file mode 100644
index 9a4622577c13..000000000000
@@ -1,15 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_MX31ADS=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_MXC_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MXC_SPI=y
include/configs/mx31ads.h deleted +0 -144

144 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

PATCH 2/2 mx31ads: Delete

Quoted 4 lines · Tom Rini

This platform has been marked as orphaned since September 2013, remove.

Signed-off-by Tom Rini <[email protected]>

---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH 1/2 imx31_phycore: Delete

In reply to Tom Rini
Quoted 4 lines · Tom Rini

This platform has been marked as orphaned since September 2013, remove.

Signed-off-by Tom Rini <[email protected]>

---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================