Patch "bus: brcmstb_gisb: correct support for 64-bit address output" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Apr 10, 2018

Subsystems (2)

Stable branch Broadcom BCM7XXX Arm architecture

lore

Share & tools

lore

[email protected]

author maintainer Applied

2018-04-10 09:03 UTC #0 lore raw

This is a note to let you know that I've just added the patch titled

bus: brcmstb_gisb: correct support for 64-bit address output

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Tue Apr 10 10:31:53 CEST 2018

From: Doug Berger <[email protected]>
Date: Wed, 29 Mar 2017 17:29:10 -0700
Subject: bus: brcmstb_gisb: correct support for 64-bit address output

From: Doug Berger <[email protected]>

[ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ]

The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value.

It also removes unused definitions.

Fixes 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler")

Signed-off-by Doug Berger <[email protected]>

Acked-by Gregory Fong <[email protected]>

Signed-off-by Florian Fainelli <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bus/brcmstb_gisb.c |   36 ++++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 16 deletions(-)

drivers/bus/brcmstb_gisb.c +20 ~~-16~~

@@ -33,8 +33,6 @@
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
-#define  ARB_ERR_CAP_STATUS_BS_SHIFT	(1 << 2)
-#define  ARB_ERR_CAP_STATUS_BS_MASK	0x3c
 #define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
 #define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)

@@ -43,7 +41,6 @@ enum {
 	ARB_ERR_CAP_CLR,
 	ARB_ERR_CAP_HI_ADDR,
 	ARB_ERR_CAP_ADDR,
-	ARB_ERR_CAP_DATA,
 	ARB_ERR_CAP_STATUS,
 	ARB_ERR_CAP_MASTER,
 };

@@ -53,7 +50,6 @@ static const int gisb_offsets_bcm7038[]
 	[ARB_ERR_CAP_CLR]	= 0x0c4,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0c8,
-	[ARB_ERR_CAP_DATA]	= 0x0cc,
 	[ARB_ERR_CAP_STATUS]	= 0x0d0,
 	[ARB_ERR_CAP_MASTER]	= -1,
 };

@@ -63,7 +59,6 @@ static const int gisb_offsets_bcm7400[]
 	[ARB_ERR_CAP_CLR]	= 0x0c8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0cc,
-	[ARB_ERR_CAP_DATA]	= 0x0d0,
 	[ARB_ERR_CAP_STATUS]	= 0x0d4,
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };

@@ -73,7 +68,6 @@ static const int gisb_offsets_bcm7435[]
 	[ARB_ERR_CAP_CLR]	= 0x168,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x16c,
-	[ARB_ERR_CAP_DATA]	= 0x170,
 	[ARB_ERR_CAP_STATUS]	= 0x174,
 	[ARB_ERR_CAP_MASTER]	= 0x178,
 };

@@ -83,7 +77,6 @@ static const int gisb_offsets_bcm7445[]
 	[ARB_ERR_CAP_CLR]	= 0x7e4,
 	[ARB_ERR_CAP_HI_ADDR]	= 0x7e8,
 	[ARB_ERR_CAP_ADDR]	= 0x7ec,
-	[ARB_ERR_CAP_DATA]	= 0x7f0,
 	[ARB_ERR_CAP_STATUS]	= 0x7f4,
 	[ARB_ERR_CAP_MASTER]	= 0x7f8,
 };

@@ -105,9 +98,13 @@ static u32 gisb_read(struct brcmstb_gisb
 {
 	int offset = gdev->gisb_offsets[reg];
 
-	/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
-	if (offset == -1)
-		return 1;
+	if (offset < 0) {
+		/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+		if (reg == ARB_ERR_CAP_MASTER)
+			return 1;
+		else
+			return 0;
+	}
 
 	if (gdev->big_endian)
 		return ioread32be(gdev->base + offset);

@@ -115,6 +112,16 @@ static u32 gisb_read(struct brcmstb_gisb
 		return ioread32(gdev->base + offset);
 }
 
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+	u64 value;
+
+	value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
+	value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+	return value;
+}
+
 static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];

@@ -181,7 +188,7 @@ static int brcmstb_gisb_arb_decode_addr(
 					const char *reason)
 {
 	u32 cap_status;
-	unsigned long arb_addr;
+	u64 arb_addr;
 	u32 master;
 	const char *m_name;
 	char m_fmt[11];

@@ -193,10 +200,7 @@ static int brcmstb_gisb_arb_decode_addr(
 		return 1;
 
 	/* Read the address and master */
-	arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
-	arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+	arb_addr = gisb_read_address(gdev);
 	master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
 
 	m_name = brcmstb_gisb_master_to_str(gdev, master);

@@ -205,7 +209,7 @@ static int brcmstb_gisb_arb_decode_addr(
 		m_name = m_fmt;
 	}
 
-	pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+	pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
 		__func__, reason, arb_addr,
 		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
 		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.4/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch