mx6cuboxi: Fix some memory configuration errors
PATCH 1/1 mx6cuboxi: Fix some memory configuration errors
From: Jon Nettleton <[email protected]>
These changes bring mainline back into line with the configurations that were originally set in our stable BSP.
Signed-off-by Jon Nettleton <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
--- board/solidrun/mx6cuboxi/mx6cuboxi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
board/solidrun/mx6cuboxi/mx6cuboxi.c +1 -2
@@ -428,7 +428,7 @@ static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { .dram_sdclk_1 = 0x00020030, .dram_cas = 0x00020030, .dram_ras = 0x00020030, - .dram_reset = 0x00020030, + .dram_reset = 0x000c0030, .dram_sdcke0 = 0x00003000, .dram_sdcke1 = 0x00003000, .dram_sdba2 = 0x00000000,
@@ -584,7 +584,6 @@ static struct mx6_ddr3_cfg mem_ddr_2g = { .trcd = 1375, .trcmin = 4875, .trasmin = 3500, - .SRT = 1, };static struct mx6_ddr3_cfg mem_ddr_4g = {
Signature · 1 line
2.7.4
PATCH 1/1 mx6cuboxi: Fix some memory configuration errors
Quoted 26 lines · Fabio Estevam
From: Jon Nettleton <[email protected]>
These changes bring mainline back into line with the configurations that were originally set in our stable BSP.
Signed-off-by Jon Nettleton <[email protected]>Signed-off-by Fabio Estevam <[email protected]>--- board/solidrun/mx6cuboxi/mx6cuboxi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)board/solidrun/mx6cuboxi/mx6cuboxi.c +1
-1@@ -428,7 +428,7 @@ static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { .dram_sdclk_1 = 0x00020030, .dram_cas = 0x00020030, .dram_ras = 0x00020030, - .dram_reset = 0x00020030, + .dram_reset = 0x000c0030, .dram_sdcke0 = 0x00003000, .dram_sdcke1 = 0x00003000, .dram_sdba2 = 0x00000000,
board/solidrun/mx6cuboxi/mx6cuboxi.c static struct mx6_ddr3_cfg mem_ddr_2g = { · line 589
Quoted 7 lines
board/solidrun/mx6cuboxi/mx6cuboxi.c +0
-1@@ -584,7 +584,6 @@ static struct mx6_ddr3_cfg mem_ddr_2g = { .trcd = 1375, .trcmin = 4875, .trasmin = 3500, - .SRT = 1, };static struct mx6_ddr3_cfg mem_ddr_4g = {
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================