ahci mvebu driver updates
Subsystems (4)
cover ahci mvebu driver updates
From: Ken Ma <[email protected]>
These patches move ahci mvebu driver to drivers/ata directory with bug fixing and scsi supporting.
David Sniatkiwicz (1):
ata: ahci_mvebu: a8040 a0: remove bad port register offsets
workarounds
Ken Ma (3):
ata: mvebu: move mvebu sata driver to drivers/ata directory
ata: ahci_mvebu: add scsi support
arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU
arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 ------------------------- configs/mvebu_db-88f3720_defconfig | 1 + configs/mvebu_db_armada8k_defconfig | 1 + configs/mvebu_espressobin-88f3720_defconfig | 1 + configs/mvebu_mcbin-88f8040_defconfig | 1 + drivers/ata/Kconfig | 9 +++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 61 +++++++++++++++++++++++++++++ 9 files changed, 75 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.c
Signature · 1 line
1.9.1
PATCH 1/4 ata: mvebu: move mvebu sata driver to drivers/ata directory
From: Ken Ma <[email protected]>
Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added as AHCI_MVEBU which selects DM_SCSI.
--- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 -------------------------------------------- drivers/ata/Kconfig | 9 ++++++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.c
arch/arm/mach-mvebu/Makefile +0 -1
@@ -9,7 +9,6 @@ ifdef CONFIG_ARM64 obj-$(CONFIG_ARMADA_3700) += armada3700/ obj-$(CONFIG_ARMADA_8K) += armada8k/ obj-y += arm64-common.o -obj-y += sata.o else # CONFIG_ARM64
arch/arm/mach-mvebu/sata.c deleted +0 -54
54 lines not on this page · raw message
drivers/ata/Kconfig +9 -0
@@ -99,4 +99,13 @@ config SATA_SIL3114 help Enable this driver to support the SIL3114 SATA controllers. +config AHCI_MVEBU + bool "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU + select DM_SCSI + help + This option enables support for the Marvell EBU SoC's + onboard AHCI SATA. + + If unsure, say N. endmenu
drivers/ata/Makefile +1 -0
@@ -19,3 +19,4 @@ obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SANDBOX) += sata_sandbox.o +obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o
drivers/ata/ahci_mvebu.c new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 1/4 ata: mvebu: move mvebu sata driver to drivers/ata directory
Hi Ken,
Quoted 11 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
Currently mvebu sata driver is in
arch/arm/mach_mvebudirectory, this patch moves it todrivers/atadirectory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added asAHCI_MVEBUwhich selectsDM_SCSI.Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>
Quoted 10 lines
--- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 -------------------------------------------- drivers/ata/Kconfig | 9 ++++++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.c
How come this doesn't show up as a file move? Are you using patman to generate your patches?
Regards,
Simon
[U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
Dear Simon
Thanks a lot for your kind help and review.
Previously I did not use patman and generated my patches as below:
1. used "git mv arch/arm/mach-mvebu/sata.c drivers/ata/ahci_mvebu.c" to do the file renaming with makefiles and Kconfig file updating.
2. After the 4 patches are all finished, I used "git format-patch -4 --cover-letter -o outgoing/sata" to generate the patch set with cover letter.
3. I used " git send-email --to u-boot at lists.denx.de outgoing/sata* --force" to send out patches.
And I try to use patman as your advice, I find that the patch generated by "patman" can indicate the file "rename" relationship while the patch generated by "git format-patch" can not.
arch/arm/mach-mvebu/Makefile | 1 - drivers/ata/Kconfig | 9 +++++++++ drivers/ata/Makefile | 1 + arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c | 6 +++--- 4 files changed, 13 insertions(+), 4 deletions(-) rename arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c (89%) … diff --git a/arch/arm/mach-mvebu/sata.c b/drivers/ata/ahci_mvebu.c similarity index 89% rename from arch/arm/mach-mvebu/sata.c rename to drivers/ata/ahci_mvebu.c index 5d8032b..5c1b293 100644 --- a/arch/arm/mach-mvebu/sata.c +++ b/drivers/ata/ahci_mvebu.c @@ -1,15 +1,15 @@ /* + * Copyright (C) 2018 Marvell International Ltd. * Copyright (C) 2016 Stefan Roese <[email protected]> * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ + * https://spdx.org/licenses */ #include <common.h> #include <ahci.h> #include <dm.h> -DECLARE_GLOBAL_DATA_PTR; - /* * Dummy implementation that can be overwritten by a board * specific function
But I failed to send out patches by patman as below, it says " Alias 'ata' not found ".
ken at mshsrv05:~/git_ken/u-boot/u-boot$ tools/patman/patman -c4
Cleaned 4 patches
0 errors, 1 warnings, 0 checks for 0001-ata-mvebu-move-mvebu-sata-driver-to-drivers-ata-dire.patch:
<unknown>:0: warning: added, moved or deleted file(s), does MAINTAINERS need updating?
checkpatch.pl found 0 error(s), 1 warning(s), 0 checks(s)
Traceback (most recent call last):
File "tools/patman/patman", line 161, in <module>
options.add_maintainers)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/series.py", line 231, in MakeCcFile
raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 326, in BuildEmailList
raw += LookupEmail(item, alias, raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 503, in LookupEmail
raise ValueError(msg)
ValueError: Alias 'ata' not found
Thanks a lot for your kind help!
Yours,
Ken
-----Original Message-----
From: [email protected] [mailto:sjg at google.com] On Behalf Of Simon Glass
Sent: 2018年5月23日 7:30
To: Ken Ma
Cc: U-Boot Mailing List; Stefan Roese
Subject: [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
External Email
----------------------------------------------------------------------
Hi Ken,
Quoted 11 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
Currently mvebu sata driver is in
arch/arm/mach_mvebudirectory, this patch moves it todrivers/atadirectory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added asAHCI_MVEBUwhich selectsDM_SCSI.Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>
Quoted 10 lines
--- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 -------------------------------------------- drivers/ata/Kconfig | 9 ++++++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.c
How come this doesn't show up as a file move? Are you using patman to generate your patches?
Regards,
Simon
[U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
Hi Ken,
Quoted 63 lines · Ken Ma
Dear Simon
Thanks a lot for your kind help and review.
Previously I did not use patman and generated my patches as below:
1. used "git mvarch/arm/mach-mvebu/sata.cdrivers/ata/ahci_mvebu.c" to do the file renaming with makefiles andKconfigfile updating.
2. After the 4 patches are all finished, I used "git format-patch -4 --cover-letter -o outgoing/sata" to generate the patch set with cover letter.
3. I used " git send-email --to u-boot at lists.denx.de outgoing/sata* --force" to send out patches.And I try to use patman as your advice, I find that the patch generated by "patman" can indicate the file "rename" relationship while the patch generated by "git format-patch" can not.
arch/arm/mach-mvebu/Makefile | 1 - drivers/ata/Kconfig | 9 +++++++++ drivers/ata/Makefile | 1 + arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c | 6 +++--- 4 files changed, 13 insertions(+), 4 deletions(-) rename arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c (89%) … diff --git a/arch/arm/mach-mvebu/sata.c b/drivers/ata/ahci_mvebu.c similarity index 89% rename from arch/arm/mach-mvebu/sata.c rename to drivers/ata/ahci_mvebu.c index 5d8032b..5c1b293 100644 --- a/arch/arm/mach-mvebu/sata.c +++ b/drivers/ata/ahci_mvebu.c @@ -1,15 +1,15 @@ /* + * Copyright (C) 2018 Marvell International Ltd. * Copyright (C) 2016 Stefan Roese <[email protected]> * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ + * https://spdx.org/licenses */ #include <common.h> #include <ahci.h> #include <dm.h> -DECLARE_GLOBAL_DATA_PTR; - /* * Dummy implementation that can be overwritten by a board * specific functionBut I failed to send out patches by patman as below, it says " Alias 'ata' not found ".
ken at mshsrv05:~/git_ken/u-boot/u-boot$tools/patman/patman-c4
Cleaned 4 patches
0 errors, 1 warnings, 0 checks for 0001-ata-mvebu-move-mvebu-sata-driver-to-drivers-ata-dire.patch:
<unknown>:0: warning: added, moved or deleted file(s), doesMAINTAINERSneed updating?checkpatch.pl found 0 error(s), 1 warning(s), 0 checks(s)
Traceback (most recent call last):
File "tools/patman/patman", line 161, in <module>
options.add_maintainers)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/series.py", line 231, in MakeCcFile
raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 326, in BuildEmailList
raw +=LookupEmail(item, alias, raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 503, in LookupEmail
raise ValueError(msg)
ValueError: Alias 'ata' not found
Quoted 1 line
Thanks a lot for your kind help!
You can use the -t flag to ignore the missing alias.
Regards,
Simon
Quoted 45 lines
Yours,
Ken-----Original Message-----
From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass
Sent: 2018年5月23日 7:30
To: Ken Ma
Cc: U-Boot Mailing List; Stefan Roese
Subject: [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver todrivers/atadirectoryExternal Email
----------------------------------------------------------------------
Hi Ken,Quoted 11 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
Currently mvebu sata driver is in
arch/arm/mach_mvebudirectory, this patch moves it todrivers/atadirectory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added asAHCI_MVEBUwhich selectsDM_SCSI.Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>Quoted 10 lines
--- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 -------------------------------------------- drivers/ata/Kconfig | 9 ++++++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.cHow come this doesn't show up as a file move? Are you using patman to generate your patches?
Regards,
Simon
[U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
Hi Simon
Patman is very helpful and useful!
I have sent my patches v2 with patman.
Thanks a lot for your kind help!
Yours,
Ken
-----Original Message-----
From: [email protected] [mailto:sjg at google.com] On Behalf Of Simon Glass
Sent: 2018年5月24日 0:22
To: Ken Ma
Cc: U-Boot Mailing List; Stefan Roese; Wilson Ding; Nadav Haklai; Hua Jing
Subject: Re: [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
Hi Ken,
Quoted 63 lines · Ken Ma
Dear Simon
Thanks a lot for your kind help and review.
Previously I did not use patman and generated my patches as below:
1. used "git mvarch/arm/mach-mvebu/sata.cdrivers/ata/ahci_mvebu.c" to do the file renaming with makefiles andKconfigfile updating.
2. After the 4 patches are all finished, I used "git format-patch -4 --cover-letter -o outgoing/sata" to generate the patch set with cover letter.
3. I used " git send-email --to u-boot at lists.denx.de outgoing/sata* --force" to send out patches.And I try to use patman as your advice, I find that the patch generated by "patman" can indicate the file "rename" relationship while the patch generated by "git format-patch" can not.
arch/arm/mach-mvebu/Makefile | 1 - drivers/ata/Kconfig | 9 +++++++++ drivers/ata/Makefile | 1 + arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c | 6 +++--- 4 files changed, 13 insertions(+), 4 deletions(-) rename arch/arm/mach-mvebu/sata.c => drivers/ata/ahci_mvebu.c (89%) … diff --git a/arch/arm/mach-mvebu/sata.c b/drivers/ata/ahci_mvebu.c similarity index 89% rename from arch/arm/mach-mvebu/sata.c rename to drivers/ata/ahci_mvebu.c index 5d8032b..5c1b293 100644 --- a/arch/arm/mach-mvebu/sata.c +++ b/drivers/ata/ahci_mvebu.c @@ -1,15 +1,15 @@ /* + * Copyright (C) 2018 Marvell International Ltd. * Copyright (C) 2016 Stefan Roese <[email protected]> * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ + * https://spdx.org/licenses */ #include <common.h> #include <ahci.h> #include <dm.h> -DECLARE_GLOBAL_DATA_PTR; - /* * Dummy implementation that can be overwritten by a board * specific functionBut I failed to send out patches by patman as below, it says " Alias 'ata' not found ".
ken at mshsrv05:~/git_ken/u-boot/u-boot$tools/patman/patman-c4
Cleaned 4 patches
0 errors, 1 warnings, 0 checks for 0001-ata-mvebu-move-mvebu-sata-driver-to-drivers-ata-dire.patch:
<unknown>:0: warning: added, moved or deleted file(s), doesMAINTAINERSneed updating?checkpatch.pl found 0 error(s), 1 warning(s), 0 checks(s)
Traceback (most recent call last):
File "tools/patman/patman", line 161, in <module>
options.add_maintainers)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/series.py", line 231, in MakeCcFile
raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 326, in BuildEmailList
raw +=LookupEmail(item, alias, raise_on_error=raise_on_error)
File "/home/ken/git_ken/u-boot/u-boot/tools/patman/gitutil.py", line 503, in LookupEmail
raise ValueError(msg)
ValueError: Alias 'ata' not found
Quoted 1 line
Thanks a lot for your kind help!
You can use the -t flag to ignore the missing alias.
Regards,
Simon
Quoted 45 lines
Yours,
Ken-----Original Message-----
From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass
Sent: 2018年5月23日 7:30
To: Ken Ma
Cc: U-Boot Mailing List; Stefan Roese
Subject: [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver todrivers/atadirectoryExternal Email
----------------------------------------------------------------------
Hi Ken,Quoted 11 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
Currently mvebu sata driver is in
arch/arm/mach_mvebudirectory, this patch moves it todrivers/atadirectory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added asAHCI_MVEBUwhich selectsDM_SCSI.Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>Quoted 10 lines
--- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/sata.c | 54 -------------------------------------------- drivers/ata/Kconfig | 9 ++++++++ drivers/ata/Makefile | 1 + drivers/ata/ahci_mvebu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 arch/arm/mach-mvebu/sata.c create mode 100644 drivers/ata/ahci_mvebu.cHow come this doesn't show up as a file move? Are you using patman to generate your patches?
Regards,
Simon
[U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory
Hi Ken,
Quoted 6 lines · Ken Ma
Hi Simon
Patman is very helpful and useful!
I have sent my patches v2 with patman.Thanks a lot for your kind help!
OK good! I find patman particularly helpful for collecting changing logs once you get to v2, v3, etc.
Regards,
Simon
PATCH 2/4 ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds
In reply to make at marvell.comFrom: David Sniatkiwicz <[email protected]>
This workaround was added for A8040/7040 A0. A8040/7040 A0 is no longer supported so this workaround can be removed.
--- drivers/ata/ahci_mvebu.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/ata/ahci_mvebu.c +0 -8
@@ -19,14 +19,6 @@ __weak int board_ahci_enable(void)return 0 ; } -#ifdef CONFIG_ARMADA_8K -/* CP110 has different AHCI port addresses */ -void __iomem *ahci_port_base (void __iomem *base,u32 port) -{ -return base +0x10000 + (port *0x10000 ); -} -#endif -static int mvebu_ahci_probe (struct udevice *dev) {/*
Signature · 1 line
1.9.1
PATCH 2/4 ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds
Quoted 6 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: David Sniatkiwicz <[email protected]>
This workaround was added for A8040/7040 A0. A8040/7040 A0 is no longer supported so this workaround can be removed.
Quoted 7 lines
Signed-off-by David Sniatkiwicz <[email protected]>Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>--- drivers/ata/ahci_mvebu.c | 8 -------- 1 file changed, 8 deletions(-)
PATCH 3/4 ata: ahci_mvebu: add scsi support
In reply to make at marvell.comFrom: Ken Ma <[email protected]>
Mvebu AHCI is AHCI driver which uses SCSI under the hood. This patch adjusts AHCI setup to support SCSI by creating a SCSI device as a child.
--- drivers/ata/ahci_mvebu.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
drivers/ata/ahci_mvebu.c +16 -1
@@ -19,6 +19,20 @@ __weak int board_ahci_enable(void)return 0 ; } +static int mvebu_ahci_bind (struct udevice *dev) +{ +struct udevice *scsi_dev; +int ret; + + ret =ahci_bind_scsi (dev, &scsi_dev); +if (ret) { +debug ("%s: Failed to bind (err=%d\n)" , __func__, ret); +return ret; + } + +return 0 ; +} +static int mvebu_ahci_probe (struct udevice *dev) {/*
@@ -27,7 +41,7 @@ static int mvebu_ahci_probe(struct udevice *dev)*/ board_ahci_enable (); -ahci_init (devfdt_get_addr_ptr (dev)); +ahci_probe_scsi (dev, (ulong )devfdt_get_addr_ptr (dev));return 0 ; }
@@ -42,5 +56,6 @@ U_BOOT_DRIVER(ahci_mvebu_drv) = { .name = "ahci_mvebu", .id = UCLASS_AHCI, .of_match = mvebu_ahci_ids, + .bind = mvebu_ahci_bind, .probe = mvebu_ahci_probe, };
Signature · 1 line
1.9.1
PATCH 3/4 ata: ahci_mvebu: add scsi support
Quoted 6 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
Mvebu AHCI is AHCI driver which uses SCSI under the hood. This patch adjusts AHCI setup to support SCSI by creating a SCSI device as a child.
Quoted 6 lines
Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>--- drivers/ata/ahci_mvebu.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
PATCH 4/4 arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU
In reply to make at marvell.comFrom: Ken Ma <[email protected]>
This patch enables the new ahci mvebu driver for marvell arm64 platform SOCs(A3k and A8k).
--- configs/mvebu_db-88f3720_defconfig | 1 + configs/mvebu_db_armada8k_defconfig | 1 + configs/mvebu_espressobin-88f3720_defconfig | 1 + configs/mvebu_mcbin-88f8040_defconfig | 1 + 4 files changed, 4 insertions(+)
configs/mvebu_db-88f3720_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MAC_PARTITION=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y CONFIG_BLOCK_CACHE=y CONFIG_DM_GPIO=y # CONFIG_MVEBU_GPIO is not set
configs/mvebu_db_armada8k_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MAC_PARTITION=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y CONFIG_BLOCK_CACHE=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y
configs/mvebu_espressobin-88f3720_defconfig +1 -0
@@ -28,6 +28,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MAC_PARTITION=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y CONFIG_BLOCK_CACHE=y CONFIG_DM_I2C=y CONFIG_MISC=y
configs/mvebu_mcbin-88f8040_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MAC_PARTITION=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y CONFIG_BLOCK_CACHE=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y
Signature · 1 line
1.9.1
PATCH 4/4 arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU
Quoted 8 lines · On 17 May 2018 at 19:27, <[email protected]> wrote:
From: Ken Ma <[email protected]>
This patch enables the new ahci mvebu driver for marvell arm64 platform SOCs(A3k and A8k).
Signed-off-by Ken Ma <[email protected]>Cc Simon Glass <[email protected]>Cc Stefan Roese <[email protected]>
Quoted 6 lines
--- configs/mvebu_db-88f3720_defconfig | 1 + configs/mvebu_db_armada8k_defconfig | 1 + configs/mvebu_espressobin-88f3720_defconfig | 1 + configs/mvebu_mcbin-88f8040_defconfig | 1 + 4 files changed, 4 insertions(+)