Add support for Truly NT35597 panel used in MSM reference platforms.
Subsystems (5)
PATCH v3 1/2 Add support for Truly NT35597 panel used in MSM reference platforms.
This panel supports both single DSI and dual DSI
modes.
However, this patch series adds support only for
dual DSI mode.
Changes in v3:
- Changes to commit text
- Separated the documentation from the driver itself
- Improved the documentation to cover the port information
- Formatting fixes and changes in delays in panel sequences
- Cleaned up probe function
Signed-off-by Archit Taneja <[email protected]>
Signed-off-by Abhinav Kumar <[email protected]>
--- drivers/gpu/drm/panel/Kconfig | 8 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-truly-nt35597.c | 588 ++++++++++++++++++++++++++++ 3 files changed, 597 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-truly-nt35597.c
drivers/gpu/drm/panel/Kconfig +8 -0
@@ -177,4 +177,12 @@ config DRM_PANEL_SITRONIX_ST7789V Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels +config DRM_PANEL_TRULY_NT35597_WQXGA + tristate "Truly WQXGA" + depends on OF + depends on DRM_MIPI_DSI + select VIDEOMODE_HELPERS + help + Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI + Video Mode panel endmenu
drivers/gpu/drm/panel/Makefile +1 -0
@@ -18,3 +18,4 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o +obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
drivers/gpu/drm/panel/panel-truly-nt35597.c new file +588 -0
588 lines not on this page · raw message
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v3 2/2 dt-bindings: Add Truly NT35597 panel bindings
Add the device tree bindings for Truly NT35597 panel. This panel supports both single DSI and dual DSI.
However, this patch series supports only dual DSI.
Signed-off-by Abhinav Kumar <[email protected]>
--- .../devicetree/bindings/display/truly,nt35597.txt | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/truly,nt35597.txt
Documentation/devicetree/bindings/display/truly,nt35597.txt new file +69 -0
@@ -0,0 +1,69 @@ +Truly model NT35597 1440x2560 DSI Panel + +Required properties: +- compatible: should be "truly,nt35597" +- vdda-supply: phandle of the regulator that provides the supply voltage + Power IC supply +- vdispp-supply: phandle of the regulator that provides the supply voltage + for positive LCD bias +- vdispn-supply: phandle of the regulator that provides the supply voltage + for negative LCD bias +- reset-gpios: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names +- mode-gpios: phandle of the gpio for choosing the mode of the display + for single DSI or Dual DSI + This should be low for dual DSI and high for single DSI mode +- display-timings: Node for the Panel timings +- ports: This device has two video ports driven by two DSIs. Their connections + are modelled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + - port@0: DSI input port driven by master DSI + - port@1: DSI input port driven by secondary DSI + +Example: + + dsi@ae94000 { + panel@0 { + compatible = "truly,nt35597"; + reg = <0>; + vdda-supply = <&pm8998_l14>; + vdispp-supply = <&lab_regulator>; + vdispn-supply = <&ibb_regulator>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&dpu_dsi_active>; + pinctrl-1 = <&dpu_dsi_suspend>; + + reset-gpios = <&tlmm 6 0>; + mode-gpios = <&tlmm 52 0>; + display-timings { + timing0: timing-0 { + clock-frequency = <268316138>; + hactive = <1440>; + vactive = <2560>; + hfront-porch = <200>; + hback-porch = <64>; + hsync-len = <32>; + vfront-porch = <8>; + vback-porch = <7>; + vsync-len = <1>; + }; + }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + };
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel