power: pmic: Let PFUZE3000 see all 256 registers
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
The PFUZE3000 uses registers addresses up to 0xff.
The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers.
Also rename the too generic PMIC_NUM_OF_REGS enumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration value PFUZE100_NUM_OF_REGS.
--- drivers/power/pmic/pfuze100.c | 3 ++- drivers/power/pmic/pmic_pfuze3000.c | 2 +- include/power/pfuze3000_pmic.h | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-)
drivers/power/pmic/pfuze100.c +2 -1
@@ -13,6 +13,7 @@#include <power/pmic.h> #include <power/regulator.h> #include <power/pfuze100_pmic.h> +#include <power/pfuze3000_pmic.h> DECLARE_GLOBAL_DATA_PTR ;
@@ -26,7 +27,7 @@ static const struct pmic_child_info pmic_children_info[] = {static int pfuze100_reg_count (struct udevice *dev) { -return PFUZE100_NUM_OF_REGS ; +return dev->driver_data ==PFUZE3000 ?PFUZE3000_NUM_OF_REGS :PFUZE100_NUM_OF_REGS ; } static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff,
drivers/power/pmic/pmic_pfuze3000.c +1 -1
@@ -23,7 +23,7 @@ int power_pfuze3000_init(unsigned char bus) p->name = name; p->interface =PMIC_I2C ; - p->number_of_regs =PMIC_NUM_OF_REGS ; + p->number_of_regs =PFUZE3000_NUM_OF_REGS ; p->hw.i2c.addr =CONFIG_POWER_PFUZE3000_I2C_ADDR ; p->hw.i2c.tx_num =1 ; p->bus = bus;
include/power/pfuze3000_pmic.h +1 -1
@@ -70,7 +70,7 @@ enum {PFUZE3000_VLDO3CTL =0x70 ,PFUZE3000_VLD4CTL =0x71 , - PMIC_NUM_OF_REGS = 0x7F, + PFUZE3000_NUM_OF_REGS = 0x100, };int power_pfuze3000_init (unsigned char bus);
Signature · 1 line
2.14.3
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
Quoted 9 lines · Trent Piepho
The PFUZE3000 uses registers addresses up to
0xff.The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers.
Also rename the too generic
PMIC_NUM_OF_REGSenumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration valuePFUZE100_NUM_OF_REGS.
Quoted 5 lines
Cc Peng Fan <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Signed-off-by Trent Piepho <[email protected]>
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
Ping. Been a while. 2018.05 is out.
Quoted 20 lines · Fabio Estevam
Quoted 11 lines · Trent Piepho
The PFUZE3000 uses registers addresses up to
0xff.The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it
to use the device type to return the correct number of registers.Also rename the too generic
PMIC_NUM_OF_REGSenumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration valuePFUZE100_NUM_OF_REGS.Quoted 5 lines
Cc Peng Fan <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Signed-off-by Trent Piepho <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
[Adding Stefano]
Quoted 23 lines · Trent Piepho
Ping. Been a while. 2018.05 is out.
Quoted 20 lines · Fabio Estevam
Quoted 11 lines · Trent Piepho
The PFUZE3000 uses registers addresses up to
0xff.The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it
to use the device type to return the correct number of registers.Also rename the too generic
PMIC_NUM_OF_REGSenumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration valuePFUZE100_NUM_OF_REGS.Quoted 5 lines
Cc Peng Fan <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Signed-off-by Trent Piepho <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
In reply to Trent PiephoHi Stefano,
Could you please consider this one for 2018.07?
Thanks
Quoted 74 lines · Trent Piepho
The PFUZE3000 uses registers addresses up to
0xff.The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers.
Also rename the too generic
PMIC_NUM_OF_REGSenumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration valuePFUZE100_NUM_OF_REGS.Cc Peng Fan <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Signed-off-by Trent Piepho <[email protected]>--- drivers/power/pmic/pfuze100.c | 3 ++- drivers/power/pmic/pmic_pfuze3000.c | 2 +- include/power/pfuze3000_pmic.h | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-)drivers/power/pmic/pfuze100.c +2
-1@@ -13,6 +13,7 @@#include <power/pmic.h> #include <power/regulator.h> #include <power/pfuze100_pmic.h> +#include <power/pfuze3000_pmic.h> DECLARE_GLOBAL_DATA_PTR ;@@ -26,7 +27,7 @@ static const struct pmic_child_info pmic_children_info[] = {static int pfuze100_reg_count (struct udevice *dev) { -return PFUZE100_NUM_OF_REGS ; +return dev->driver_data ==PFUZE3000 ?PFUZE3000_NUM_OF_REGS :PFUZE100_NUM_OF_REGS ; } static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff,drivers/power/pmic/pmic_pfuze3000.c +1
-1@@ -23,7 +23,7 @@ int power_pfuze3000_init(unsigned char bus) p->name = name; p->interface =PMIC_I2C ; - p->number_of_regs =PMIC_NUM_OF_REGS ; + p->number_of_regs =PFUZE3000_NUM_OF_REGS ; p->hw.i2c.addr =CONFIG_POWER_PFUZE3000_I2C_ADDR ; p->hw.i2c.tx_num =1 ; p->bus = bus;include/power/pfuze3000_pmic.h +1
-2@@ -70,7 +70,7 @@ enum {PFUZE3000_VLDO3CTL =0x70 ,PFUZE3000_VLD4CTL =0x71 , - PMIC_NUM_OF_REGS = 0x7F, + PFUZE3000_NUM_OF_REGS = 0x100, };int power_pfuze3000_init (unsigned char bus); --2.14.3
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 1/1 power: pmic: Let PFUZE3000 see all 256 registers
Quoted 4 lines · Fabio Estevam
Hi Stefano,
Could you please consider this one for 2018.07?
Hi Fabio,
sure, is u-boot-imx the right tree for it ?
Anyway, applied to u-boot-imx, thanks !
Best regards,
Stefano
Quoted 77 lines
Thanks
Quoted 74 lines · Trent Piepho
The PFUZE3000 uses registers addresses up to
0xff.The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers.
Also rename the too generic
PMIC_NUM_OF_REGSenumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration valuePFUZE100_NUM_OF_REGS.Cc Peng Fan <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Stefano Babic <[email protected]>Cc Fabio Estevam <[email protected]>Signed-off-by Trent Piepho <[email protected]>--- drivers/power/pmic/pfuze100.c | 3 ++- drivers/power/pmic/pmic_pfuze3000.c | 2 +- include/power/pfuze3000_pmic.h | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-)drivers/power/pmic/pfuze100.c +2
-1@@ -13,6 +13,7 @@#include <power/pmic.h> #include <power/regulator.h> #include <power/pfuze100_pmic.h> +#include <power/pfuze3000_pmic.h> DECLARE_GLOBAL_DATA_PTR ;@@ -26,7 +27,7 @@ static const struct pmic_child_info pmic_children_info[] = {static int pfuze100_reg_count (struct udevice *dev) { -return PFUZE100_NUM_OF_REGS ; +return dev->driver_data ==PFUZE3000 ?PFUZE3000_NUM_OF_REGS :PFUZE100_NUM_OF_REGS ; } static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff,drivers/power/pmic/pmic_pfuze3000.c +1
-1@@ -23,7 +23,7 @@ int power_pfuze3000_init(unsigned char bus) p->name = name; p->interface =PMIC_I2C ; - p->number_of_regs =PMIC_NUM_OF_REGS ; + p->number_of_regs =PFUZE3000_NUM_OF_REGS ; p->hw.i2c.addr =CONFIG_POWER_PFUZE3000_I2C_ADDR ; p->hw.i2c.tx_num =1 ; p->bus = bus;include/power/pfuze3000_pmic.h +1
-2@@ -70,7 +70,7 @@ enum {PFUZE3000_VLDO3CTL =0x70 ,PFUZE3000_VLD4CTL =0x71 , - PMIC_NUM_OF_REGS = 0x7F, + PFUZE3000_NUM_OF_REGS = 0x100, };int power_pfuze3000_init (unsigned char bus); --2.14.3
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================