ASoC: rt5682: add rt5682 codec driver
Subsystems (4)
PATCH 1/1 ASoC: rt5682: add rt5682 codec driver
This is the initial codec driver for rt5682.
--- Documentation/devicetree/bindings/sound/rt5682.txt | 50 + include/sound/rt5682.h | 40 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682.c | 2682 ++++++++++++++++++++ sound/soc/codecs/rt5682.h | 1324 ++++++++++ 6 files changed, 4104 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5682.txt create mode 100644 include/sound/rt5682.h create mode 100644 sound/soc/codecs/rt5682.c create mode 100644 sound/soc/codecs/rt5682.h
Documentation/devicetree/bindings/sound/rt5682.txt new file +50 -0
@@ -0,0 +1,50 @@ +RT5682 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5682" or "realtek,rt5682i" + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO2 pin as dmic1 data pin + 2: using GPIO5 pin as dmic1 data pin + +- realtek,dmic1-clk-pin + 0: using GPIO1 pin as dmic1 clock pin + 1: using GPIO3 pin as dmic1 clock pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5682: + + * DMIC L1 + * DMIC R1 + * IN1P + * HPOL + * HPOR + +Example: + +rt5682 { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; +};
include/sound/rt5682.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* linux/sound/rt5682.h -- Platform data for RT5682 +* +* Copyright 2018 Realtek Microelectronics +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __LINUX_SND_RT5682_H +#define __LINUX_SND_RT5682_H + +enum rt5682_dmic1_data_pin { +RT5682_DMIC1_NULL , +RT5682_DMIC1_DATA_GPIO2 , +RT5682_DMIC1_DATA_GPIO5 , +}; + +enum rt5682_dmic1_clk_pin { +RT5682_DMIC1_CLK_GPIO1 , +RT5682_DMIC1_CLK_GPIO3 , +}; + +enum rt5682_jd_src { +RT5682_JD_NULL , +RT5682_JD1 , +}; + +struct rt5682_platform_data { + +int ldo1_en;/* GPIO for LDO1_EN */ + +enum rt5682_dmic1_data_pin dmic1_data_pin; +enum rt5682_dmic1_clk_pin dmic1_clk_pin; +enum rt5682_jd_src jd_src; +}; + +#endif +
sound/soc/codecs/Kconfig +6 -0
@@ -141,6 +141,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5668 if I2C select SND_SOC_RT5670 if I2C select SND_SOC_RT5677 if I2C && SPI_MASTER + select SND_SOC_RT5682 if I2C select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SIRF_AUDIO_CODEC
@@ -778,6 +779,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5668=y default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y + default y if SND_SOC_RT5682=y default y if SND_SOC_RT1305=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m
@@ -791,6 +793,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5668=m default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m + default m if SND_SOC_RT5682=m default m if SND_SOC_RT1305=m config SND_SOC_RL6347A
@@ -871,6 +874,9 @@ config SND_SOC_RT5677_SPI tristate default SND_SOC_RT5677 && SPI +config SND_SOC_RT5682 + tristate + #Freescale sgtl5000 codec config SND_SOC_SGTL5000 tristate "Freescale SGTL5000 CODEC"
sound/soc/codecs/Makefile +2 -0
@@ -146,6 +146,7 @@ snd-soc-rt5668-objs := rt5668.o snd-soc-rt5670-objs := rt5670.o snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o +snd-soc-rt5682-objs := rt5682.o snd-soc-sgtl5000-objs := sgtl5000.o snd-soc-alc5623-objs := alc5623.o snd-soc-alc5632-objs := alc5632.o
@@ -405,6 +406,7 @@ obj-$(CONFIG_SND_SOC_RT5668) += snd-soc-rt5668.o obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o +obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
sound/soc/codecs/rt5682.c new file +2682 -0
2,682 lines not on this page · raw message
sound/soc/codecs/rt5682.h new file +1324 -0
184 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
Mark Brown
maintainerApplied "ASoC: rt5682: add rt5682 codec driver" to the asoc tree
The patch
ASoC: rt5682: add rt5682 codec driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
0ddce71c21f03fd19867c4939d3ca710f37cdf1aMon Sep 17 00:00:00 2001
From: Bard Liao <[email protected]>
Date: Thu, 7 Jun 2018 16:37:38 +0800
Subject: [PATCH] ASoC: rt5682: add rt5682 codec driver
This is the initial codec driver for rt5682.
--- .../devicetree/bindings/sound/rt5682.txt | 50 + include/sound/rt5682.h | 40 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682.c | 2682 +++++++++++++++++ sound/soc/codecs/rt5682.h | 1324 ++++++++ 6 files changed, 4104 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5682.txt create mode 100644 include/sound/rt5682.h create mode 100644 sound/soc/codecs/rt5682.c create mode 100644 sound/soc/codecs/rt5682.h
Documentation/devicetree/bindings/sound/rt5682.txt new file +50 -0
@@ -0,0 +1,50 @@ +RT5682 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5682" or "realtek,rt5682i" + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO2 pin as dmic1 data pin + 2: using GPIO5 pin as dmic1 data pin + +- realtek,dmic1-clk-pin + 0: using GPIO1 pin as dmic1 clock pin + 1: using GPIO3 pin as dmic1 clock pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5682: + + * DMIC L1 + * DMIC R1 + * IN1P + * HPOL + * HPOR + +Example: + +rt5682 { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; +};
include/sound/rt5682.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* linux/sound/rt5682.h -- Platform data for RT5682 +* +* Copyright 2018 Realtek Microelectronics +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __LINUX_SND_RT5682_H +#define __LINUX_SND_RT5682_H + +enum rt5682_dmic1_data_pin { +RT5682_DMIC1_NULL , +RT5682_DMIC1_DATA_GPIO2 , +RT5682_DMIC1_DATA_GPIO5 , +}; + +enum rt5682_dmic1_clk_pin { +RT5682_DMIC1_CLK_GPIO1 , +RT5682_DMIC1_CLK_GPIO3 , +}; + +enum rt5682_jd_src { +RT5682_JD_NULL , +RT5682_JD1 , +}; + +struct rt5682_platform_data { + +int ldo1_en;/* GPIO for LDO1_EN */ + +enum rt5682_dmic1_data_pin dmic1_data_pin; +enum rt5682_dmic1_clk_pin dmic1_clk_pin; +enum rt5682_jd_src jd_src; +}; + +#endif +
sound/soc/codecs/Kconfig +6 -0
@@ -141,6 +141,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5668 if I2C select SND_SOC_RT5670 if I2C select SND_SOC_RT5677 if I2C && SPI_MASTER + select SND_SOC_RT5682 if I2C select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SIRF_AUDIO_CODEC
@@ -778,6 +779,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5668=y default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y + default y if SND_SOC_RT5682=y default y if SND_SOC_RT1305=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m
@@ -791,6 +793,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5668=m default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m + default m if SND_SOC_RT5682=m default m if SND_SOC_RT1305=m config SND_SOC_RL6347A
@@ -871,6 +874,9 @@ config SND_SOC_RT5677_SPI tristate default SND_SOC_RT5677 && SPI +config SND_SOC_RT5682 + tristate + #Freescale sgtl5000 codec config SND_SOC_SGTL5000 tristate "Freescale SGTL5000 CODEC"
sound/soc/codecs/Makefile +2 -0
@@ -146,6 +146,7 @@ snd-soc-rt5668-objs := rt5668.o snd-soc-rt5670-objs := rt5670.o snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o +snd-soc-rt5682-objs := rt5682.o snd-soc-sgtl5000-objs := sgtl5000.o snd-soc-alc5623-objs := alc5623.o snd-soc-alc5632-objs := alc5632.o
@@ -405,6 +406,7 @@ obj-$(CONFIG_SND_SOC_RT5668) += snd-soc-rt5668.o obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o +obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
sound/soc/codecs/rt5682.c new file +2682 -0
2,682 lines not on this page · raw message
sound/soc/codecs/rt5682.h new file +1324 -0
184 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1
Part of the diff is not shown here. View the raw message.