Skip to contentSkip to conversation

cl-som-imx7: Remove CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

PATCH New Fabio Estevam 2 participants 2 messages Jun 18, 2018 – Jun 27, 2018 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 cl-som-imx7: Remove CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

From: Fabio Estevam <[email protected]>

Since commit 1da1938d57b3 ("spl: Add default values for ARCH_MX7") CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is selected by default on i.MX7 platforms, so remove it from the board defconfig.

Signed-off-by Fabio Estevam <[email protected]>
---
 configs/cl-som-imx7_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/cl-som-imx7_defconfig +0 -1
index 6d403ee..38be7db 100644
@@ -17,7 +17,6 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SPL_BOARD_INIT=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 cl-som-imx7: Remove CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

Quoted 17 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Since commit 1da1938d57b3 ("spl: Add default values for ARCH_MX7") CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is selected by default on i.MX7 platforms, so remove it from the board defconfig.

Signed-off-by Fabio Estevam <[email protected]>
---
 configs/cl-som-imx7_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/cl-som-imx7_defconfig +0 -0
index 6d403ee..38be7db 100644

configs/cl-som-imx7_defconfig CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" · line 22

Quoted 7 lines
configs/cl-som-imx7_defconfig +0 -1
@@ -17,7 +17,6 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SPL_BOARD_INIT=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================