ASoC: Intel: Boards: Add GLK Realtek Maxim I2S machine driver
Subsystems (3)
PATCH v2 1/1 ASoC: Intel: Boards: Add GLK Realtek Maxim I2S machine driver
Patch adds Geminilake I2S machine driver which uses following codecs:
RT5682 and MAX98357A.
v2: reverse xmas tree alignment of var declaration, add Acked-by.
Signed-off-by Naveen Manohar <[email protected]>
Signed-off-by Harsha Priya <[email protected]>
sound/soc/intel/boards/Kconfig +14 -0
@@ -281,6 +281,20 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH Say Y if you have such a device. If unsure select "N". +config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH + tristate "GLK with RT5682 and MAX98357A in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5682 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Geminilake platforms + with RT5682 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + endif ## SND_SOC_INTEL_SKYLAKE endif ## SND_SOC_INTEL_MACH
sound/soc/intel/boards/Makefile +2 -0
@@ -6,6 +6,7 @@ snd-soc-sst-bdw-rt5677-mach-objs := bdw-rt5677.o snd-soc-sst-broadwell-objs := broadwell.o snd-soc-sst-bxt-da7219_max98357a-objs := bxt_da7219_max98357a.o snd-soc-sst-bxt-rt298-objs := bxt_rt298.o +snd-soc-sst-glk-rt5682_max98357a-objs := glk_rt5682_max98357a.o snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
@@ -27,6 +28,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o obj-$(CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH) += snd-soc-sst-bxt-da7219_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o +obj-$(CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH) += snd-soc-sst-glk-rt5682_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o obj-$(CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH) += snd-soc-sst-bdw-rt5677-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o
sound/soc/intel/boards/glk_rt5682_max98357a.c new file +644 -0
644 lines not on this page · raw message
Signature · 1 line
2.7.4
Quoted 4 lines · Naveen Manohar
Patch adds Geminilake I2S machine driver which uses following codecs:
RT5682 and MAX98357A.v2: reverse xmas tree alignment of var declaration, add Acked-by.
this should go below the --- which is missing below the tags. some editor issue here maybe?
Quoted 57 lines
Signed-off-by Naveen Manohar <[email protected]>Signed-off-by Harsha Priya <[email protected]>sound/soc/intel/boards/Kconfig +14
-0@@ -281,6 +281,20 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH Say Y if you have such a device. If unsure select "N". +config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH + tristate "GLK with RT5682 and MAX98357A in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5682 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Geminilake platforms + with RT5682 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + endif ## SND_SOC_INTEL_SKYLAKE endif ## SND_SOC_INTEL_MACHsound/soc/intel/boards/Makefile +2
-0@@ -6,6 +6,7 @@ snd-soc-sst-bdw-rt5677-mach-objs := bdw-rt5677.o snd-soc-sst-broadwell-objs := broadwell.o snd-soc-sst-bxt-da7219_max98357a-objs := bxt_da7219_max98357a.o snd-soc-sst-bxt-rt298-objs := bxt_rt298.o +snd-soc-sst-glk-rt5682_max98357a-objs := glk_rt5682_max98357a.o snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o@@ -27,6 +28,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o obj-$(CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH) += snd-soc-sst-bxt-da7219_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o +obj-$(CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH) += snd-soc-sst-glk-rt5682_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o obj-$(CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH) += snd-soc-sst-bdw-rt5677-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.osound/soc/intel/boards/glk_rt5682_max98357a.c new file +0
-0@@ -0,0 +1,644 @@